/* * Copyright (c) 2016 Nordic Semiconductor. All Rights Reserved. * * The information contained herein is confidential property of Nordic Semiconductor. The use, * copying, transfer or disclosure of such information is prohibited except by express written * agreement with Nordic Semiconductor. * */ #include #include #include #include "nordic_common.h" #include "app_error.h" #include "app_uart.h" #include "ble_db_discovery.h" #include "app_timer.h" #include "app_util.h" #include "bsp.h" #include "bsp_btn_ble.h" #include "boards.h" #include "ble.h" #include "ble_gap.h" #include "ble_hci.h" #include "softdevice_handler.h" #include "ble_advdata.h" #include "ble_nus_c.h" #include "fds.h" #include "fstorage.h" #include "nrf_log.h" #include "nrf_log_ctrl.h" #include "SEGGER_RTT.h" //#include "SEGGER_RTT_printf.h" #include "nrf_delay.h" #define NRF_LOG_MODULE_NAME "APP" static volatile uint8_t write_flag = 0; #define CENTRAL_LINK_COUNT 1 /**< Number of central links used by the application. When changing this number remember to adjust the RAM settings*/ #define PERIPHERAL_LINK_COUNT 0 /**< Number of peripheral links used by the application. When changing this number remember to adjust the RAM settings*/ #if (NRF_SD_BLE_API_VERSION == 3) #define NRF_BLE_MAX_MTU_SIZE GATT_MTU_SIZE_DEFAULT /**< MTU size used in the softdevice enabling and to reply to a BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event. */ #endif #define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */ #define UART_RX_BUF_SIZE 256 /**< UART RX buffer size. */ #define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). */ #define APP_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. */ #define APP_TIMER_OP_QUEUE_SIZE 2 /**< Size of timer operation queues. */ #define SCAN_INTERVAL 0x00A0 /**< Determines scan interval in units of 0.625 millisecond. */ #define SCAN_WINDOW 0x0050 /**< Determines scan window in units of 0.625 millisecond. */ #define SCAN_ACTIVE 1 /**< If 1, performe active scanning (scan requests). */ #define SCAN_SELECTIVE 0 /**< If 1, ignore unknown devices (non whitelisted). */ #define SCAN_TIMEOUT 0x0000 /**< Timout when scanning. 0x0000 disables timeout. */ #define MIN_CONNECTION_INTERVAL MSEC_TO_UNITS(20, UNIT_1_25_MS) /**< Determines minimum connection interval in millisecond. */ #define MAX_CONNECTION_INTERVAL MSEC_TO_UNITS(75, UNIT_1_25_MS) /**< Determines maximum connection interval in millisecond. */ #define SLAVE_LATENCY 0 /**< Determines slave latency in counts of connection events. */ #define SUPERVISION_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) /**< Determines supervision time-out in units of 10 millisecond. */ #define UUID16_SIZE 2 /**< Size of 16 bit UUID */ #define UUID32_SIZE 4 /**< Size of 32 bit UUID */ #define UUID128_SIZE 16 /**< Size of 128 bit UUID */ static ble_nus_c_t m_ble_nus_c; /**< Instance of NUS service. Must be passed to all NUS_C API calls. */ static ble_db_discovery_t m_ble_db_discovery; /**< Instance of database discovery module. Must be passed to all db_discovert API calls */ /** * @brief Connection parameters requested for connection. */ static const ble_gap_conn_params_t m_connection_param = { (uint16_t)MIN_CONNECTION_INTERVAL, // Minimum connection (uint16_t)MAX_CONNECTION_INTERVAL, // Maximum connection (uint16_t)SLAVE_LATENCY, // Slave latency (uint16_t)SUPERVISION_TIMEOUT // Supervision time-out }; /** * @brief Parameters used when scanning. */ static const ble_gap_scan_params_t m_scan_params = { .active = 1, .interval = SCAN_INTERVAL, .window = SCAN_WINDOW, .timeout = SCAN_TIMEOUT, #if (NRF_SD_BLE_API_VERSION == 2) .selective = 0, .p_whitelist = NULL, #endif #if (NRF_SD_BLE_API_VERSION == 3) .use_whitelist = 0, #endif }; /** * @brief NUS uuid */ static const ble_uuid_t m_nus_uuid = { .uuid = BLE_UUID_NUS_SERVICE, .type = NUS_SERVICE_UUID_TYPE }; /**@brief Function for asserts in the SoftDevice. * * @details This function will be called in case of an assert in the SoftDevice. * * @warning This handler is an example only and does not fit a final product. You need to analyze * how your product is supposed to react in case of Assert. * @warning On assert from the SoftDevice, the system can only recover on reset. * * @param[in] line_num Line number of the failing ASSERT call. * @param[in] p_file_name File name of the failing ASSERT call. */ void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name) { app_error_handler(0xDEADBEEF, line_num, p_file_name); } static void my_fds_evt_handler(fds_evt_t const * const p_fds_evt) { switch (p_fds_evt->id) { case FDS_EVT_INIT: if (p_fds_evt->result != FDS_SUCCESS) { // Initialization failed. } break; case FDS_EVT_WRITE: if (p_fds_evt->result == FDS_SUCCESS) { write_flag=1; } break; default: break; } } static ret_code_t fds_test_write(uint32_t tmp) { #define FILE_ID 0x1111 #define REC_KEY 0x2222 // static uint32_t const m_deadbeef[2] = {0xDEADBEEF,0xBAADF00D}; uint32_t m_deadbeef[1] = {tmp}; fds_record_t record; fds_record_desc_t record_desc; fds_record_chunk_t record_chunk; // Set up data. record_chunk.p_data = m_deadbeef; record_chunk.length_words = 1; // Set up record. record.file_id = FILE_ID; record.key = REC_KEY; record.data.p_chunks = &record_chunk; record.data.num_chunks = 1; ret_code_t ret = fds_record_write(&record_desc, &record); if (ret != FDS_SUCCESS) { return ret; } // NRF_LOG_INFO("Writing Record ID = %d \r\n",record_desc.record_id); return NRF_SUCCESS; } static ret_code_t fds_read(void) { #define FILE_ID 0x1111 #define REC_KEY 0x2222 fds_flash_record_t flash_record; fds_record_desc_t record_desc; fds_find_token_t ftok ={0};//Important, make sure you zero init the ftok token uint32_t *data; uint32_t err_code; // NRF_LOG_INFO("Start searching... \r\n"); // Loop until all records with the given key and file ID have been found. while (fds_record_find(FILE_ID, REC_KEY, &record_desc, &ftok) == FDS_SUCCESS) { err_code = fds_record_open(&record_desc, &flash_record); if ( err_code != FDS_SUCCESS) { return err_code; } // NRF_LOG_INFO("Found Record ID = %d\r\n",record_desc.record_id); // NRF_LOG_INFO("Data = "); data = (uint32_t *) flash_record.p_data; for (uint8_t i=0;itl.length_words;i++) { // NRF_LOG_INFO("%d ",data[i]); } // NRF_LOG_INFO("\r\n"); // Access the record through the flash_record structure. // Close the record when done. err_code = fds_record_close(&record_desc); if (err_code != FDS_SUCCESS) { return err_code; } } return NRF_SUCCESS; } static ret_code_t fds_test_find_and_delete (void) { #define FILE_ID 0x1111 #define REC_KEY 0x2222 fds_record_desc_t record_desc; fds_find_token_t ftok; ftok.page=0; ftok.p_addr=NULL; // Loop and find records with same ID and rec key and mark them as deleted. while (fds_record_find(FILE_ID, REC_KEY, &record_desc, &ftok) == FDS_SUCCESS) { fds_record_delete(&record_desc); printf("Deleted record ID: %d \r\n",record_desc.record_id); } // call the garbage collector to empty them, don't need to do this all the time, this is just for demonstration ret_code_t ret = fds_gc(); if (ret != FDS_SUCCESS) { return ret; } return NRF_SUCCESS; } static ret_code_t fds_test_init (void) { ret_code_t ret = fds_register(my_fds_evt_handler); if (ret != FDS_SUCCESS) { return ret; } ret = fds_init(); if (ret != FDS_SUCCESS) { return ret; } return NRF_SUCCESS; } /**@brief Function to start scanning. */ static void scan_start(void) { ret_code_t ret; ret = sd_ble_gap_scan_start(&m_scan_params); APP_ERROR_CHECK(ret); ret = bsp_indication_set(BSP_INDICATE_SCANNING); APP_ERROR_CHECK(ret); } /**@brief Function for handling database discovery events. * * @details This function is callback function to handle events from the database discovery module. * Depending on the UUIDs that are discovered, this function should forward the events * to their respective services. * * @param[in] p_event Pointer to the database discovery event. */ static void db_disc_handler(ble_db_discovery_evt_t * p_evt) { ble_nus_c_on_db_disc_evt(&m_ble_nus_c, p_evt); } /**@brief Function for handling app_uart events. * * @details This function will receive a single character from the app_uart module and append it to * a string. The string will be be sent over BLE when the last character received was a * 'new line' i.e '\r\n' (hex 0x0D) or if the string has reached a length of * @ref NUS_MAX_DATA_LENGTH. */ void uart_event_handle(app_uart_evt_t * p_event) { static uint8_t data_array[BLE_NUS_MAX_DATA_LEN]; static uint8_t index = 0; switch (p_event->evt_type) { /**@snippet [Handling data from UART] */ case APP_UART_DATA_READY: UNUSED_VARIABLE(app_uart_get(&data_array[index])); index++; if ((data_array[index - 1] == '\n') || (index >= (BLE_NUS_MAX_DATA_LEN))) { while (ble_nus_c_string_send(&m_ble_nus_c, data_array, index) != NRF_SUCCESS) { // repeat until sent. } index = 0; } break; /**@snippet [Handling data from UART] */ case APP_UART_COMMUNICATION_ERROR: APP_ERROR_HANDLER(p_event->data.error_communication); break; case APP_UART_FIFO_ERROR: APP_ERROR_HANDLER(p_event->data.error_code); break; default: break; } } /**@brief Callback handling NUS Client events. * * @details This function is called to notify the application of NUS client events. * * @param[in] p_ble_nus_c NUS Client Handle. This identifies the NUS client * @param[in] p_ble_nus_evt Pointer to the NUS Client event. */ /**@snippet [Handling events from the ble_nus_c module] */ static void ble_nus_c_evt_handler(ble_nus_c_t * p_ble_nus_c, const ble_nus_c_evt_t * p_ble_nus_evt) { uint32_t err_code; switch (p_ble_nus_evt->evt_type) { case BLE_NUS_C_EVT_DISCOVERY_COMPLETE: err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles); APP_ERROR_CHECK(err_code); err_code = ble_nus_c_rx_notif_enable(p_ble_nus_c); APP_ERROR_CHECK(err_code); printf("The device has the Nordic UART Service\r\n"); break; case BLE_NUS_C_EVT_NUS_RX_EVT: for (uint32_t i = 0; i < p_ble_nus_evt->data_len; i++) { while (app_uart_put( p_ble_nus_evt->p_data[i]) != NRF_SUCCESS); } break; case BLE_NUS_C_EVT_DISCONNECTED: printf("Disconnected\r\n"); scan_start(); break; } } /**@snippet [Handling events from the ble_nus_c module] */ /**@brief Function for putting the chip into sleep mode. * * @note This function will not return. */ static void sleep_mode_enter(void) { uint32_t err_code = bsp_indication_set(BSP_INDICATE_IDLE); APP_ERROR_CHECK(err_code); // Prepare wakeup buttons. err_code = bsp_btn_ble_sleep_mode_prepare(); APP_ERROR_CHECK(err_code); // Go to system-off mode (this function will not return; wakeup will cause a reset). err_code = sd_power_system_off(); APP_ERROR_CHECK(err_code); } /**@brief Reads an advertising report and checks if a uuid is present in the service list. * * @details The function is able to search for 16-bit, 32-bit and 128-bit service uuids. * To see the format of a advertisement packet, see * https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm * * @param[in] p_target_uuid The uuid to search fir * @param[in] p_adv_report Pointer to the advertisement report. * * @retval true if the UUID is present in the advertisement report. Otherwise false */ static bool is_uuid_present(const ble_uuid_t *p_target_uuid, const ble_gap_evt_adv_report_t *p_adv_report) { uint32_t err_code; uint32_t index = 0; uint8_t *p_data = (uint8_t *)p_adv_report->data; ble_uuid_t extracted_uuid; while (index < p_adv_report->dlen) { uint8_t field_length = p_data[index]; uint8_t field_type = p_data[index + 1]; if ( (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE) || (field_type == BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE) ) { for (uint32_t u_index = 0; u_index < (field_length / UUID16_SIZE); u_index++) { err_code = sd_ble_uuid_decode( UUID16_SIZE, &p_data[u_index * UUID16_SIZE + index + 2], &extracted_uuid); if (err_code == NRF_SUCCESS) { if ((extracted_uuid.uuid == p_target_uuid->uuid) && (extracted_uuid.type == p_target_uuid->type)) { return true; } } } } else if ( (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE) || (field_type == BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE) ) { for (uint32_t u_index = 0; u_index < (field_length / UUID32_SIZE); u_index++) { err_code = sd_ble_uuid_decode(UUID16_SIZE, &p_data[u_index * UUID32_SIZE + index + 2], &extracted_uuid); if (err_code == NRF_SUCCESS) { if ((extracted_uuid.uuid == p_target_uuid->uuid) && (extracted_uuid.type == p_target_uuid->type)) { return true; } } } } else if ( (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE) || (field_type == BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE) ) { err_code = sd_ble_uuid_decode(UUID128_SIZE, &p_data[index + 2], &extracted_uuid); if (err_code == NRF_SUCCESS) { if ((extracted_uuid.uuid == p_target_uuid->uuid) && (extracted_uuid.type == p_target_uuid->type)) { return true; } } } index += field_length + 1; } return false; } /**@brief Function for handling the Application's BLE Stack events. * * @param[in] p_ble_evt Bluetooth stack event. */ static void on_ble_evt(ble_evt_t * p_ble_evt) { uint32_t err_code; uint8_t i; uint32_t tmp; const ble_gap_evt_t * p_gap_evt = &p_ble_evt->evt.gap_evt; const ble_gap_evt_adv_report_t *p_adv = &p_ble_evt->evt.gap_evt.params.adv_report; switch (p_ble_evt->header.evt_id) { case BLE_GAP_EVT_ADV_REPORT: { const ble_gap_evt_adv_report_t * p_adv_report = &p_gap_evt->params.adv_report; { // scan is automatically stopped by the connect err_code = bsp_indication_set(BSP_INDICATE_IDLE); APP_ERROR_CHECK(err_code); printf("Mac address %02x%02x%02x%02x%02x%02x\r\n", p_adv_report->peer_addr.addr[5], p_adv_report->peer_addr.addr[4], p_adv_report->peer_addr.addr[3], p_adv_report->peer_addr.addr[2], p_adv_report->peer_addr.addr[1], p_adv_report->peer_addr.addr[0] ); printf("Data: "); for(i=0;i<17;i++) { printf("%02x", p_adv->data[i]); } printf(" \r\nRSSI: %d\n", p_adv->rssi); } //} }break; // BLE_GAP_EVT_ADV_REPORT case BLE_GAP_EVT_CONNECTED: //NRF_LOG_DEBUG("Connected to target\r\n"); err_code = bsp_indication_set(BSP_INDICATE_CONNECTED); APP_ERROR_CHECK(err_code); // start discovery of services. The NUS Client waits for a discovery result err_code = ble_db_discovery_start(&m_ble_db_discovery, p_ble_evt->evt.gap_evt.conn_handle); APP_ERROR_CHECK(err_code); break; // BLE_GAP_EVT_CONNECTED case BLE_GAP_EVT_TIMEOUT: if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_SCAN) { //NRF_LOG_DEBUG("Scan timed out.\r\n"); scan_start(); } else if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN) { printf("Connection Request timed out.\r\n"); } break; // BLE_GAP_EVT_TIMEOUT case BLE_GAP_EVT_SEC_PARAMS_REQUEST: // Pairing not supported err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.gap_evt.conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL); APP_ERROR_CHECK(err_code); break; // BLE_GAP_EVT_SEC_PARAMS_REQUEST case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST: // Accepting parameters requested by peer. err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle, &p_gap_evt->params.conn_param_update_request.conn_params); APP_ERROR_CHECK(err_code); break; // BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST case BLE_GATTC_EVT_TIMEOUT: // Disconnect on GATT Client timeout event. //NRF_LOG_DEBUG("GATT Client Timeout.\r\n"); err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); APP_ERROR_CHECK(err_code); break; // BLE_GATTC_EVT_TIMEOUT case BLE_GATTS_EVT_TIMEOUT: // Disconnect on GATT Server timeout event. //NRF_LOG_DEBUG("GATT Server Timeout.\r\n"); err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); APP_ERROR_CHECK(err_code); break; // BLE_GATTS_EVT_TIMEOUT #if (NRF_SD_BLE_API_VERSION == 3) case BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST: err_code = sd_ble_gatts_exchange_mtu_reply(p_ble_evt->evt.gatts_evt.conn_handle, NRF_BLE_MAX_MTU_SIZE); APP_ERROR_CHECK(err_code); break; // BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST #endif default: break; } } /**@brief Function for dispatching a BLE stack event to all modules with a BLE stack event handler. * * @details This function is called from the scheduler in the main loop after a BLE stack event has * been received. * * @param[in] p_ble_evt Bluetooth stack event. */ static void ble_evt_dispatch(ble_evt_t * p_ble_evt) { on_ble_evt(p_ble_evt); bsp_btn_ble_on_ble_evt(p_ble_evt); ble_db_discovery_on_ble_evt(&m_ble_db_discovery, p_ble_evt); ble_nus_c_on_ble_evt(&m_ble_nus_c,p_ble_evt); } /**@brief Function for initializing the BLE stack. * * @details Initializes the SoftDevice and the BLE event interrupt. */ static void ble_stack_init(void) { uint32_t err_code; nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC; // Initialize the SoftDevice handler module. SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL); ble_enable_params_t ble_enable_params; err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT, &ble_enable_params); APP_ERROR_CHECK(err_code); //Check the ram settings against the used number of links CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT); // Enable BLE stack. #if (NRF_SD_BLE_API_VERSION == 3) ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_MAX_MTU_SIZE; #endif err_code = softdevice_enable(&ble_enable_params); APP_ERROR_CHECK(err_code); // Register with the SoftDevice handler module for BLE events. err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch); APP_ERROR_CHECK(err_code); } /**@brief Function for handling events from the BSP module. * * @param[in] event Event generated by button press. */ void bsp_event_handler(bsp_event_t event) { uint32_t err_code; switch (event) { case BSP_EVENT_SLEEP: sleep_mode_enter(); break; case BSP_EVENT_DISCONNECT: err_code = sd_ble_gap_disconnect(m_ble_nus_c.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } break; default: break; } } /**@brief Function for initializing the UART. */ static void uart_init(void) { uint32_t err_code; const app_uart_comm_params_t comm_params = { .rx_pin_no = RX_PIN_NUMBER, .tx_pin_no = TX_PIN_NUMBER, .rts_pin_no = RTS_PIN_NUMBER, .cts_pin_no = CTS_PIN_NUMBER, .flow_control = APP_UART_FLOW_CONTROL_ENABLED, .use_parity = false, .baud_rate = UART_BAUDRATE_BAUDRATE_Baud115200 }; APP_UART_FIFO_INIT(&comm_params, UART_RX_BUF_SIZE, UART_TX_BUF_SIZE, uart_event_handle, APP_IRQ_PRIORITY_LOWEST, err_code); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing the NUS Client. */ static void nus_c_init(void) { uint32_t err_code; ble_nus_c_init_t nus_c_init_t; nus_c_init_t.evt_handler = ble_nus_c_evt_handler; err_code = ble_nus_c_init(&m_ble_nus_c, &nus_c_init_t); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing buttons and leds. */ static void buttons_leds_init(void) { bsp_event_t startup_event; uint32_t err_code = bsp_init(BSP_INIT_LED, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER), bsp_event_handler); APP_ERROR_CHECK(err_code); err_code = bsp_btn_ble_init(NULL, &startup_event); APP_ERROR_CHECK(err_code); } /** @brief Function for initializing the Database Discovery Module. */ static void db_discovery_init(void) { uint32_t err_code = ble_db_discovery_init(db_disc_handler); APP_ERROR_CHECK(err_code); } /** @brief Function for the Power manager. */ static void power_manage(void) { uint32_t err_code = sd_app_evt_wait(); APP_ERROR_CHECK(err_code); } int main(void) { uint32_t err_code; APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, NULL); uart_init(); SEGGER_RTT_WriteString(0, "Hell World!\n"); // SEGGER_RTT_printf(0, "%sResetting in %d second..%s\n", RTT_CTRL_BG_BRIGHT_RED, 1, RTT_CTRL_RESET); //SEGGER_RTT_printf(0, "Hello"); err_code = NRF_LOG_INIT(NULL); //SEGGER_RTT_printf("NRF_LOG_INIT- %d", err_code); // SEGGER_RTT_printf(0, "variable value: %d\n", err_code); err_code =fds_test_init(); //printf("FDS_TEST_INIT- %d", err_code); APP_ERROR_CHECK(err_code); err_code = fds_test_find_and_delete(); APP_ERROR_CHECK(err_code); buttons_leds_init(); db_discovery_init(); ble_stack_init(); nus_c_init(); // Start scanning for peripherals and initiate connection // with devices that advertise NUS UUID. NRF_LOG_INFO("Uart_c Scan started\r\n"); scan_start(); for (;;) { power_manage(); } }