/** * Copyright (c) 2017 - 2017, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef SDK_CONFIG_H #define SDK_CONFIG_H // <<< Use Configuration Wizard in Context Menu >>>\n #ifdef USE_APP_CONFIG #include "app_config.h" #endif // Application //========================================================== // ANT_NETWORK_NUM - Network number. #ifndef ANT_NETWORK_NUM #define ANT_NETWORK_NUM 0 #endif // BROADCAST_CHANNEL_NUMBER - Broadcast channel number. #ifndef BROADCAST_CHANNEL_NUMBER #define BROADCAST_CHANNEL_NUMBER 0 #endif // CHAN_ID_DEV_NUM - Channel ID: Device Number. #ifndef CHAN_ID_DEV_NUM #define CHAN_ID_DEV_NUM 2 #endif // CHAN_ID_DEV_TYPE - Channel ID: Device Type. #ifndef CHAN_ID_DEV_TYPE #define CHAN_ID_DEV_TYPE 2 #endif // CHAN_ID_TRANS_TYPE - Channel ID: Transmission type. #ifndef CHAN_ID_TRANS_TYPE #define CHAN_ID_TRANS_TYPE 2 #endif // CHAN_PERIOD - Channel Period (in 32 kHz counts). #ifndef CHAN_PERIOD #define CHAN_PERIOD 1092 #endif // RF_FREQ - RF Frequency. #ifndef RF_FREQ #define RF_FREQ 66 #endif // //========================================================== // nRF_ANT //========================================================== // ANT_CHANNEL_CONFIG_ENABLED - ant_channel_config - ANT common channel configuration #ifndef ANT_CHANNEL_CONFIG_ENABLED #define ANT_CHANNEL_CONFIG_ENABLED 1 #endif // //========================================================== // nRF_Drivers //========================================================== // GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver //========================================================== #ifndef GPIOTE_ENABLED #define GPIOTE_ENABLED 1 #endif // GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins #ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS #define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 #endif // GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice // <0=> 0 (highest) // <1=> 1 // <2=> 2 // <3=> 3 // <4=> 4 // <5=> 5 // <6=> 6 // <7=> 7 #ifndef GPIOTE_CONFIG_IRQ_PRIORITY #define GPIOTE_CONFIG_IRQ_PRIORITY 7 #endif // // PERIPHERAL_RESOURCE_SHARING_ENABLED - nrf_drv_common - Peripheral drivers common module #ifndef PERIPHERAL_RESOURCE_SHARING_ENABLED #define PERIPHERAL_RESOURCE_SHARING_ENABLED 0 #endif // //========================================================== // nRF_Libraries //========================================================== // APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler //========================================================== #ifndef APP_SCHEDULER_ENABLED #define APP_SCHEDULER_ENABLED 1 #endif // APP_SCHEDULER_WITH_PAUSE - Enabling pause feature #ifndef APP_SCHEDULER_WITH_PAUSE #define APP_SCHEDULER_WITH_PAUSE 0 #endif // APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling #ifndef APP_SCHEDULER_WITH_PROFILER #define APP_SCHEDULER_WITH_PROFILER 0 #endif // // APP_TIMER_ENABLED - app_timer - Application timer functionality //========================================================== #ifndef APP_TIMER_ENABLED #define APP_TIMER_ENABLED 1 #endif // APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. // <0=> 32768 Hz // <1=> 16384 Hz // <3=> 8192 Hz // <7=> 4096 Hz // <15=> 2048 Hz // <31=> 1024 Hz #ifndef APP_TIMER_CONFIG_RTC_FREQUENCY #define APP_TIMER_CONFIG_RTC_FREQUENCY 0 #endif // APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice // <0=> 0 (highest) // <1=> 1 // <2=> 2 // <3=> 3 // <4=> 4 // <5=> 5 // <6=> 6 // <7=> 7 #ifndef APP_TIMER_CONFIG_IRQ_PRIORITY #define APP_TIMER_CONFIG_IRQ_PRIORITY 7 #endif // APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. // Size of the queue depends on how many timers are used // in the system, how often timers are started and overall // system latency. If queue size is too small app_timer calls // will fail. #ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE #define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 #endif // APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler #ifndef APP_TIMER_CONFIG_USE_SCHEDULER #define APP_TIMER_CONFIG_USE_SCHEDULER 0 #endif // APP_TIMER_WITH_PROFILER - Enable app_timer profiling #ifndef APP_TIMER_WITH_PROFILER #define APP_TIMER_WITH_PROFILER 0 #endif // APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on // If option is enabled RTC is kept running even if there is no active timers. // This option can be used when app_timer is used for timestamping. #ifndef APP_TIMER_KEEPS_RTC_ACTIVE #define APP_TIMER_KEEPS_RTC_ACTIVE 0 #endif // APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. // <0=> 0 // <1=> 1 #ifndef APP_TIMER_CONFIG_SWI_NUMBER #define APP_TIMER_CONFIG_SWI_NUMBER 0 #endif // // BUTTON_ENABLED - app_button - buttons handling module #ifndef BUTTON_ENABLED #define BUTTON_ENABLED 1 #endif // HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release //========================================================== #ifndef HARDFAULT_HANDLER_ENABLED #define HARDFAULT_HANDLER_ENABLED 1 #endif // HARDFAULT_HANDLER_GDB_PSP_BACKTRACE - Bypass the GDB problem with multiple stack pointers backtrace // There is a known bug in GDB which causes it to incorrectly backtrace the code // when multiple stack pointers are used (main and process stack pointers). // This option enables the fix for that problem and allows to see the proper backtrace info. // It makes it possible to trace the code to the exact point where a HardFault appeared. // This option requires additional commands and may temporarily switch MSP stack to store data on PSP space. // This is an optional parameter - enable it while debugging. // Before a HardFault handler exits, the stack will be reverted to its previous value. #ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE #define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1 #endif // // NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module //========================================================== #ifndef NRF_BALLOC_ENABLED #define NRF_BALLOC_ENABLED 1 #endif // NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. //========================================================== #ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED #define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 #endif // NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> #ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS #define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 #endif // NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> #ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS #define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 #endif // NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. #ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED #define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 #endif // NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. #ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED #define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 #endif // NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. #ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED #define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 #endif // // // NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module #ifndef NRF_MEMOBJ_ENABLED #define NRF_MEMOBJ_ENABLED 1 #endif // NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module //========================================================== #ifndef NRF_PWR_MGMT_ENABLED #define NRF_PWR_MGMT_ENABLED 1 #endif // NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module. // Selected pin will be set when CPU is in sleep mode. //========================================================== #ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED #define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 1 #endif // NRF_PWR_MGMT_SLEEP_DEBUG_PIN - Pin number // <0=> 0 (P0.0) // <1=> 1 (P0.1) // <2=> 2 (P0.2) // <3=> 3 (P0.3) // <4=> 4 (P0.4) // <5=> 5 (P0.5) // <6=> 6 (P0.6) // <7=> 7 (P0.7) // <8=> 8 (P0.8) // <9=> 9 (P0.9) // <10=> 10 (P0.10) // <11=> 11 (P0.11) // <12=> 12 (P0.12) // <13=> 13 (P0.13) // <14=> 14 (P0.14) // <15=> 15 (P0.15) // <16=> 16 (P0.16) // <17=> 17 (P0.17) // <18=> 18 (P0.18) // <19=> 19 (P0.19) // <20=> 20 (P0.20) // <21=> 21 (P0.21) // <22=> 22 (P0.22) // <23=> 23 (P0.23) // <24=> 24 (P0.24) // <25=> 25 (P0.25) // <26=> 26 (P0.26) // <27=> 27 (P0.27) // <28=> 28 (P0.28) // <29=> 29 (P0.29) // <30=> 30 (P0.30) // <31=> 31 (P0.31) // <4294967295=> Not connected #ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN #define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 24 #endif // // NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED - Enables CPU usage monitor. // Module will trace percentage of CPU usage in one second intervals. #ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED #define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0 #endif // NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout. //========================================================== #ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED #define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0 #endif // NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). // Shutdown procedure will begin no earlier than after this number of seconds. #ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S #define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3 #endif // // NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED - Enables FPU event cleaning. #ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED #define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 1 #endif // NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY - Blocked shutdown procedure will be retried every second. #ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY #define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0 #endif // NRF_PWR_MGMT_CONFIG_USE_SCHEDULER - Module will use @ref app_scheduler. #ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER #define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0 #endif // NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. // The number of stages of the shutdown process. #ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT #define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3 #endif // // NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator #ifndef NRF_SECTION_ITER_ENABLED #define NRF_SECTION_ITER_ENABLED 1 #endif // NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. #ifndef NRF_STRERROR_ENABLED #define NRF_STRERROR_ENABLED 1 #endif // //========================================================== // nRF_Log //========================================================== // nrf_log - Logging //========================================================== // NRF_LOG_ENABLED - Logging module for nRF5 SDK //========================================================== #ifndef NRF_LOG_ENABLED #define NRF_LOG_ENABLED 1 #endif // NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string //========================================================== #ifndef NRF_LOG_USES_COLORS #define NRF_LOG_USES_COLORS 0 #endif // NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LOG_COLOR_DEFAULT #define NRF_LOG_COLOR_DEFAULT 0 #endif // NRF_LOG_ERROR_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LOG_ERROR_COLOR #define NRF_LOG_ERROR_COLOR 0 #endif // NRF_LOG_WARNING_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LOG_WARNING_COLOR #define NRF_LOG_WARNING_COLOR 0 #endif // // NRF_LOG_DEFAULT_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_LOG_DEFAULT_LEVEL #define NRF_LOG_DEFAULT_LEVEL 3 #endif // NRF_LOG_DEFERRED - Enable deffered logger. // Log data is buffered and can be processed in idle. #ifndef NRF_LOG_DEFERRED #define NRF_LOG_DEFERRED 1 #endif // NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). // Must be power of 2 and multiple of 4. // If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. // <128=> 128 // <256=> 256 // <512=> 512 // <1024=> 1024 // <2048=> 2048 // <4096=> 4096 // <8192=> 8192 // <16384=> 16384 #ifndef NRF_LOG_BUFSIZE #define NRF_LOG_BUFSIZE 1024 #endif // NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. // If set then oldest logs are overwritten. Otherwise a // marker is injected informing about overflow. #ifndef NRF_LOG_ALLOW_OVERFLOW #define NRF_LOG_ALLOW_OVERFLOW 1 #endif // NRF_LOG_USES_TIMESTAMP - Enable timestamping // Function for getting the timestamp is provided by the user #ifndef NRF_LOG_USES_TIMESTAMP #define NRF_LOG_USES_TIMESTAMP 0 #endif // NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. #ifndef NRF_LOG_FILTERS_ENABLED #define NRF_LOG_FILTERS_ENABLED 0 #endif // NRF_LOG_CLI_CMDS - Enable CLI commands for the module. #ifndef NRF_LOG_CLI_CMDS #define NRF_LOG_CLI_CMDS 0 #endif // Log message pool - Configuration of log message pool //========================================================== // NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. // If a small value is set, then performance of logs processing // is degraded because data is fragmented. Bigger value impacts // RAM memory utilization. The size is set to fit a message with // a timestamp and up to 2 arguments in a single memory object. #ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE #define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 #endif // NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects // If a small value is set, then it may lead to a deadlock // in certain cases if backend has high latency and holds // multiple messages for long time. Bigger value impacts // RAM memory usage. #ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT #define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 #endif // //========================================================== // // nrf_log module configuration //========================================================== // nrf_log in nRF_Core //========================================================== // NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_MPU_CONFIG_LOG_ENABLED #define NRF_MPU_CONFIG_LOG_ENABLED 0 #endif // NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_MPU_CONFIG_LOG_LEVEL #define NRF_MPU_CONFIG_LOG_LEVEL 3 #endif // NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MPU_CONFIG_INFO_COLOR #define NRF_MPU_CONFIG_INFO_COLOR 0 #endif // NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MPU_CONFIG_DEBUG_COLOR #define NRF_MPU_CONFIG_DEBUG_COLOR 0 #endif // // NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED #define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 #endif // NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL #define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 #endif // NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR #define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 #endif // NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR #define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 #endif // // TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TASK_MANAGER_CONFIG_LOG_ENABLED #define TASK_MANAGER_CONFIG_LOG_ENABLED 0 #endif // TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TASK_MANAGER_CONFIG_LOG_LEVEL #define TASK_MANAGER_CONFIG_LOG_LEVEL 3 #endif // TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TASK_MANAGER_CONFIG_INFO_COLOR #define TASK_MANAGER_CONFIG_INFO_COLOR 0 #endif // TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR #define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 #endif // // //========================================================== // nrf_log in nRF_Drivers //========================================================== // CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef CLOCK_CONFIG_LOG_ENABLED #define CLOCK_CONFIG_LOG_ENABLED 0 #endif // CLOCK_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef CLOCK_CONFIG_LOG_LEVEL #define CLOCK_CONFIG_LOG_LEVEL 3 #endif // CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef CLOCK_CONFIG_INFO_COLOR #define CLOCK_CONFIG_INFO_COLOR 0 #endif // CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef CLOCK_CONFIG_DEBUG_COLOR #define CLOCK_CONFIG_DEBUG_COLOR 0 #endif // // COMMON_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef COMMON_CONFIG_LOG_ENABLED #define COMMON_CONFIG_LOG_ENABLED 0 #endif // COMMON_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef COMMON_CONFIG_LOG_LEVEL #define COMMON_CONFIG_LOG_LEVEL 3 #endif // COMMON_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef COMMON_CONFIG_INFO_COLOR #define COMMON_CONFIG_INFO_COLOR 0 #endif // COMMON_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef COMMON_CONFIG_DEBUG_COLOR #define COMMON_CONFIG_DEBUG_COLOR 0 #endif // // COMP_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef COMP_CONFIG_LOG_ENABLED #define COMP_CONFIG_LOG_ENABLED 0 #endif // COMP_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef COMP_CONFIG_LOG_LEVEL #define COMP_CONFIG_LOG_LEVEL 3 #endif // COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef COMP_CONFIG_INFO_COLOR #define COMP_CONFIG_INFO_COLOR 0 #endif // COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef COMP_CONFIG_DEBUG_COLOR #define COMP_CONFIG_DEBUG_COLOR 0 #endif // // GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef GPIOTE_CONFIG_LOG_ENABLED #define GPIOTE_CONFIG_LOG_ENABLED 0 #endif // GPIOTE_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef GPIOTE_CONFIG_LOG_LEVEL #define GPIOTE_CONFIG_LOG_LEVEL 3 #endif // GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef GPIOTE_CONFIG_INFO_COLOR #define GPIOTE_CONFIG_INFO_COLOR 0 #endif // GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef GPIOTE_CONFIG_DEBUG_COLOR #define GPIOTE_CONFIG_DEBUG_COLOR 0 #endif // // I2S_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef I2S_CONFIG_LOG_ENABLED #define I2S_CONFIG_LOG_ENABLED 0 #endif // I2S_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef I2S_CONFIG_LOG_LEVEL #define I2S_CONFIG_LOG_LEVEL 3 #endif // I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef I2S_CONFIG_INFO_COLOR #define I2S_CONFIG_INFO_COLOR 0 #endif // I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef I2S_CONFIG_DEBUG_COLOR #define I2S_CONFIG_DEBUG_COLOR 0 #endif // // LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef LPCOMP_CONFIG_LOG_ENABLED #define LPCOMP_CONFIG_LOG_ENABLED 0 #endif // LPCOMP_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef LPCOMP_CONFIG_LOG_LEVEL #define LPCOMP_CONFIG_LOG_LEVEL 3 #endif // LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef LPCOMP_CONFIG_INFO_COLOR #define LPCOMP_CONFIG_INFO_COLOR 0 #endif // LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef LPCOMP_CONFIG_DEBUG_COLOR #define LPCOMP_CONFIG_DEBUG_COLOR 0 #endif // // PDM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef PDM_CONFIG_LOG_ENABLED #define PDM_CONFIG_LOG_ENABLED 0 #endif // PDM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PDM_CONFIG_LOG_LEVEL #define PDM_CONFIG_LOG_LEVEL 3 #endif // PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PDM_CONFIG_INFO_COLOR #define PDM_CONFIG_INFO_COLOR 0 #endif // PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PDM_CONFIG_DEBUG_COLOR #define PDM_CONFIG_DEBUG_COLOR 0 #endif // // PPI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef PPI_CONFIG_LOG_ENABLED #define PPI_CONFIG_LOG_ENABLED 0 #endif // PPI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PPI_CONFIG_LOG_LEVEL #define PPI_CONFIG_LOG_LEVEL 3 #endif // PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PPI_CONFIG_INFO_COLOR #define PPI_CONFIG_INFO_COLOR 0 #endif // PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PPI_CONFIG_DEBUG_COLOR #define PPI_CONFIG_DEBUG_COLOR 0 #endif // // PWM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef PWM_CONFIG_LOG_ENABLED #define PWM_CONFIG_LOG_ENABLED 0 #endif // PWM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PWM_CONFIG_LOG_LEVEL #define PWM_CONFIG_LOG_LEVEL 3 #endif // PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PWM_CONFIG_INFO_COLOR #define PWM_CONFIG_INFO_COLOR 0 #endif // PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PWM_CONFIG_DEBUG_COLOR #define PWM_CONFIG_DEBUG_COLOR 0 #endif // // QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef QDEC_CONFIG_LOG_ENABLED #define QDEC_CONFIG_LOG_ENABLED 0 #endif // QDEC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef QDEC_CONFIG_LOG_LEVEL #define QDEC_CONFIG_LOG_LEVEL 3 #endif // QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef QDEC_CONFIG_INFO_COLOR #define QDEC_CONFIG_INFO_COLOR 0 #endif // QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef QDEC_CONFIG_DEBUG_COLOR #define QDEC_CONFIG_DEBUG_COLOR 0 #endif // // RNG_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef RNG_CONFIG_LOG_ENABLED #define RNG_CONFIG_LOG_ENABLED 0 #endif // RNG_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef RNG_CONFIG_LOG_LEVEL #define RNG_CONFIG_LOG_LEVEL 3 #endif // RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RNG_CONFIG_INFO_COLOR #define RNG_CONFIG_INFO_COLOR 0 #endif // RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RNG_CONFIG_DEBUG_COLOR #define RNG_CONFIG_DEBUG_COLOR 0 #endif // RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. #ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED #define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 #endif // // RTC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef RTC_CONFIG_LOG_ENABLED #define RTC_CONFIG_LOG_ENABLED 0 #endif // RTC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef RTC_CONFIG_LOG_LEVEL #define RTC_CONFIG_LOG_LEVEL 3 #endif // RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RTC_CONFIG_INFO_COLOR #define RTC_CONFIG_INFO_COLOR 0 #endif // RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RTC_CONFIG_DEBUG_COLOR #define RTC_CONFIG_DEBUG_COLOR 0 #endif // // SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SAADC_CONFIG_LOG_ENABLED #define SAADC_CONFIG_LOG_ENABLED 0 #endif // SAADC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SAADC_CONFIG_LOG_LEVEL #define SAADC_CONFIG_LOG_LEVEL 3 #endif // SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SAADC_CONFIG_INFO_COLOR #define SAADC_CONFIG_INFO_COLOR 0 #endif // SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SAADC_CONFIG_DEBUG_COLOR #define SAADC_CONFIG_DEBUG_COLOR 0 #endif // // SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SPIS_CONFIG_LOG_ENABLED #define SPIS_CONFIG_LOG_ENABLED 0 #endif // SPIS_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SPIS_CONFIG_LOG_LEVEL #define SPIS_CONFIG_LOG_LEVEL 3 #endif // SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPIS_CONFIG_INFO_COLOR #define SPIS_CONFIG_INFO_COLOR 0 #endif // SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPIS_CONFIG_DEBUG_COLOR #define SPIS_CONFIG_DEBUG_COLOR 0 #endif // // SPI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SPI_CONFIG_LOG_ENABLED #define SPI_CONFIG_LOG_ENABLED 0 #endif // SPI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SPI_CONFIG_LOG_LEVEL #define SPI_CONFIG_LOG_LEVEL 3 #endif // SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPI_CONFIG_INFO_COLOR #define SPI_CONFIG_INFO_COLOR 0 #endif // SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPI_CONFIG_DEBUG_COLOR #define SPI_CONFIG_DEBUG_COLOR 0 #endif // // SWI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SWI_CONFIG_LOG_ENABLED #define SWI_CONFIG_LOG_ENABLED 0 #endif // SWI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SWI_CONFIG_LOG_LEVEL #define SWI_CONFIG_LOG_LEVEL 3 #endif // SWI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SWI_CONFIG_INFO_COLOR #define SWI_CONFIG_INFO_COLOR 0 #endif // SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SWI_CONFIG_DEBUG_COLOR #define SWI_CONFIG_DEBUG_COLOR 0 #endif // // TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TIMER_CONFIG_LOG_ENABLED #define TIMER_CONFIG_LOG_ENABLED 0 #endif // TIMER_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TIMER_CONFIG_LOG_LEVEL #define TIMER_CONFIG_LOG_LEVEL 3 #endif // TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TIMER_CONFIG_INFO_COLOR #define TIMER_CONFIG_INFO_COLOR 0 #endif // TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TIMER_CONFIG_DEBUG_COLOR #define TIMER_CONFIG_DEBUG_COLOR 0 #endif // // TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TWIS_CONFIG_LOG_ENABLED #define TWIS_CONFIG_LOG_ENABLED 0 #endif // TWIS_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TWIS_CONFIG_LOG_LEVEL #define TWIS_CONFIG_LOG_LEVEL 3 #endif // TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWIS_CONFIG_INFO_COLOR #define TWIS_CONFIG_INFO_COLOR 0 #endif // TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWIS_CONFIG_DEBUG_COLOR #define TWIS_CONFIG_DEBUG_COLOR 0 #endif // // TWI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TWI_CONFIG_LOG_ENABLED #define TWI_CONFIG_LOG_ENABLED 0 #endif // TWI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TWI_CONFIG_LOG_LEVEL #define TWI_CONFIG_LOG_LEVEL 3 #endif // TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWI_CONFIG_INFO_COLOR #define TWI_CONFIG_INFO_COLOR 0 #endif // TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWI_CONFIG_DEBUG_COLOR #define TWI_CONFIG_DEBUG_COLOR 0 #endif // // UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef UART_CONFIG_LOG_ENABLED #define UART_CONFIG_LOG_ENABLED 0 #endif // UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef UART_CONFIG_LOG_LEVEL #define UART_CONFIG_LOG_LEVEL 3 #endif // UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef UART_CONFIG_INFO_COLOR #define UART_CONFIG_INFO_COLOR 0 #endif // UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef UART_CONFIG_DEBUG_COLOR #define UART_CONFIG_DEBUG_COLOR 0 #endif // // USBD_CONFIG_LOG_ENABLED - Enable logging in the module //========================================================== #ifndef USBD_CONFIG_LOG_ENABLED #define USBD_CONFIG_LOG_ENABLED 0 #endif // USBD_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef USBD_CONFIG_LOG_LEVEL #define USBD_CONFIG_LOG_LEVEL 3 #endif // USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef USBD_CONFIG_INFO_COLOR #define USBD_CONFIG_INFO_COLOR 0 #endif // USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef USBD_CONFIG_DEBUG_COLOR #define USBD_CONFIG_DEBUG_COLOR 0 #endif // // WDT_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef WDT_CONFIG_LOG_ENABLED #define WDT_CONFIG_LOG_ENABLED 0 #endif // WDT_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef WDT_CONFIG_LOG_LEVEL #define WDT_CONFIG_LOG_LEVEL 3 #endif // WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef WDT_CONFIG_INFO_COLOR #define WDT_CONFIG_INFO_COLOR 0 #endif // WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef WDT_CONFIG_DEBUG_COLOR #define WDT_CONFIG_DEBUG_COLOR 0 #endif // // //========================================================== // nrf_log in nRF_Libraries //========================================================== // APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED #define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL #define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR #define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 #endif // APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR #define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 #endif // // APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED #define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL #define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_MSC_CONFIG_INFO_COLOR #define APP_USBD_MSC_CONFIG_INFO_COLOR 0 #endif // APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR #define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 #endif // // NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_BALLOC_CONFIG_LOG_ENABLED #define NRF_BALLOC_CONFIG_LOG_ENABLED 0 #endif // NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BALLOC_CONFIG_LOG_LEVEL #define NRF_BALLOC_CONFIG_LOG_LEVEL 3 #endif // NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BALLOC_CONFIG_INFO_COLOR #define NRF_BALLOC_CONFIG_INFO_COLOR 0 #endif // NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR #define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 #endif // // NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED #define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL #define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR #define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR #define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 #endif // // NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED #define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL #define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_UART_CONFIG_INFO_COLOR #define NRF_CLI_UART_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR #define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 #endif // // NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED #define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 #endif // NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL #define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 #endif // NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR #define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 #endif // NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR #define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 #endif // // NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED #define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 #endif // NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL #define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 #endif // NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR #define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 #endif // NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR #define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 #endif // // NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. //========================================================== #ifndef NRF_SDH_ANT_LOG_ENABLED #define NRF_SDH_ANT_LOG_ENABLED 1 #endif // NRF_SDH_ANT_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_ANT_LOG_LEVEL #define NRF_SDH_ANT_LOG_LEVEL 3 #endif // NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_ANT_INFO_COLOR #define NRF_SDH_ANT_INFO_COLOR 0 #endif // NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_ANT_DEBUG_COLOR #define NRF_SDH_ANT_DEBUG_COLOR 0 #endif // // NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. //========================================================== #ifndef NRF_SDH_BLE_LOG_ENABLED #define NRF_SDH_BLE_LOG_ENABLED 0 #endif // NRF_SDH_BLE_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_BLE_LOG_LEVEL #define NRF_SDH_BLE_LOG_LEVEL 3 #endif // NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_BLE_INFO_COLOR #define NRF_SDH_BLE_INFO_COLOR 0 #endif // NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_BLE_DEBUG_COLOR #define NRF_SDH_BLE_DEBUG_COLOR 0 #endif // // NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. //========================================================== #ifndef NRF_SDH_LOG_ENABLED #define NRF_SDH_LOG_ENABLED 1 #endif // NRF_SDH_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_LOG_LEVEL #define NRF_SDH_LOG_LEVEL 3 #endif // NRF_SDH_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_INFO_COLOR #define NRF_SDH_INFO_COLOR 0 #endif // NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_DEBUG_COLOR #define NRF_SDH_DEBUG_COLOR 0 #endif // // NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. //========================================================== #ifndef NRF_SDH_SOC_LOG_ENABLED #define NRF_SDH_SOC_LOG_ENABLED 0 #endif // NRF_SDH_SOC_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_SOC_LOG_LEVEL #define NRF_SDH_SOC_LOG_LEVEL 3 #endif // NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_SOC_INFO_COLOR #define NRF_SDH_SOC_INFO_COLOR 0 #endif // NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_SOC_DEBUG_COLOR #define NRF_SDH_SOC_DEBUG_COLOR 0 #endif // // NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED #define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 #endif // NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL #define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 #endif // NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SORTLIST_CONFIG_INFO_COLOR #define NRF_SORTLIST_CONFIG_INFO_COLOR 0 #endif // NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR #define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 #endif // // //========================================================== // //========================================================== // //========================================================== // //========================================================== // nRF_SoftDevice //========================================================== // NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler //========================================================== #ifndef NRF_SDH_ANT_ENABLED #define NRF_SDH_ANT_ENABLED 1 #endif // ANT Channels //========================================================== // NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. #ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED #define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1 #endif // NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. #ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS #define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0 #endif // //========================================================== // ANT Queues //========================================================== // NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. #ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE #define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32 #endif // NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. #ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE #define NRF_SDH_ANT_BURST_QUEUE_SIZE 128 #endif // //========================================================== // ANT Observers - Observers and priority levels //========================================================== // NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. // This setting configures the number of priority levels available for the ANT event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. #ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS #define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2 #endif // ANT Observers priorities - Invididual priorities //========================================================== // ANT_BPWR_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the Bicycle Power Profile. #ifndef ANT_BPWR_ANT_OBSERVER_PRIO #define ANT_BPWR_ANT_OBSERVER_PRIO 1 #endif // ANT_BSC_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile. #ifndef ANT_BSC_ANT_OBSERVER_PRIO #define ANT_BSC_ANT_OBSERVER_PRIO 1 #endif // ANT_ENCRYPT_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module. #ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO #define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1 #endif // ANT_HRM_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the Heart Rate Monitor. #ifndef ANT_HRM_ANT_OBSERVER_PRIO #define ANT_HRM_ANT_OBSERVER_PRIO 1 #endif // ANT_SDM_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile. #ifndef ANT_SDM_ANT_OBSERVER_PRIO #define ANT_SDM_ANT_OBSERVER_PRIO 1 #endif // ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the ANT state indicator module. #ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO #define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1 #endif // BSP_BTN_ANT_OBSERVER_PRIO // Priority with which ANT events are dispatched to the Button Control module. #ifndef BSP_BTN_ANT_OBSERVER_PRIO #define BSP_BTN_ANT_OBSERVER_PRIO 1 #endif // //========================================================== // //========================================================== // // NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler //========================================================== #ifndef NRF_SDH_ENABLED #define NRF_SDH_ENABLED 1 #endif // Dispatch model // This setting configures how Stack events are dispatched to the application. //========================================================== // NRF_SDH_DISPATCH_MODEL // NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context. // NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler. // NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually. // <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT // <1=> NRF_SDH_DISPATCH_MODEL_APPSH // <2=> NRF_SDH_DISPATCH_MODEL_POLLING #ifndef NRF_SDH_DISPATCH_MODEL #define NRF_SDH_DISPATCH_MODEL 0 #endif // //========================================================== // Clock - SoftDevice clock configuration //========================================================== // NRF_SDH_CLOCK_LF_SRC - SoftDevice clock source. // <0=> NRF_CLOCK_LF_SRC_RC // <1=> NRF_CLOCK_LF_SRC_XTAL // <2=> NRF_CLOCK_LF_SRC_SYNTH #ifndef NRF_SDH_CLOCK_LF_SRC #define NRF_SDH_CLOCK_LF_SRC 1 #endif // NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. #ifndef NRF_SDH_CLOCK_LF_RC_CTIV #define NRF_SDH_CLOCK_LF_RC_CTIV 0 #endif // NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. // How often (in number of calibration intervals) the RC oscillator shall be calibrated // if the temperature has not changed. #ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV #define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0 #endif // NRF_SDH_CLOCK_LF_XTAL_ACCURACY - External crystal clock accuracy used in the LL to compute timing windows. // <0=> NRF_CLOCK_LF_XTAL_ACCURACY_250_PPM // <1=> NRF_CLOCK_LF_XTAL_ACCURACY_500_PPM // <2=> NRF_CLOCK_LF_XTAL_ACCURACY_150_PPM // <3=> NRF_CLOCK_LF_XTAL_ACCURACY_100_PPM // <4=> NRF_CLOCK_LF_XTAL_ACCURACY_75_PPM // <5=> NRF_CLOCK_LF_XTAL_ACCURACY_50_PPM // <6=> NRF_CLOCK_LF_XTAL_ACCURACY_30_PPM // <7=> NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM #ifndef NRF_SDH_CLOCK_LF_XTAL_ACCURACY #define NRF_SDH_CLOCK_LF_XTAL_ACCURACY 7 #endif // //========================================================== // SDH Observers - Observers and priority levels //========================================================== // NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. // This setting configures the number of priority levels available for the SoftDevice request event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. #ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS #define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2 #endif // NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. // This setting configures the number of priority levels available for the SoftDevice state event handlers. // The priority level of a handler determines the order in which it receives events, with respect to other handlers. #ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS #define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2 #endif // NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. // This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC). // The priority level of a handler determines the order in which it receives events, with respect to other handlers. #ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS #define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2 #endif // State Observers priorities - Invididual priorities //========================================================== // CLOCK_CONFIG_STATE_OBSERVER_PRIO // Priority with which state events are dispatched to the Clock driver. #ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO #define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0 #endif // POWER_CONFIG_STATE_OBSERVER_PRIO // Priority with which state events are dispatched to the Power driver. #ifndef POWER_CONFIG_STATE_OBSERVER_PRIO #define POWER_CONFIG_STATE_OBSERVER_PRIO 0 #endif // RNG_CONFIG_STATE_OBSERVER_PRIO // Priority with which state events are dispatched to this module. #ifndef RNG_CONFIG_STATE_OBSERVER_PRIO #define RNG_CONFIG_STATE_OBSERVER_PRIO 0 #endif // //========================================================== // Stack Event Observers priorities - Invididual priorities //========================================================== // NRF_SDH_ANT_STACK_OBSERVER_PRIO // This setting configures the priority with which ANT events are processed with respect to other events coming from the stack. // Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC. // Zero is the highest priority. #ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO #define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0 #endif // NRF_SDH_BLE_STACK_OBSERVER_PRIO // This setting configures the priority with which BLE events are processed with respect to other events coming from the stack. // Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC. // Zero is the highest priority. #ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO #define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0 #endif // NRF_SDH_SOC_STACK_OBSERVER_PRIO // This setting configures the priority with which SoC events are processed with respect to other events coming from the stack. // Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE. // Zero is the highest priority. #ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO #define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0 #endif // TWI_ENABLED - nrf_drv_twi - TWI/TWIM peripheral driver //========================================================== #ifndef TWI_ENABLED #define TWI_ENABLED 1 #endif // TWI_DEFAULT_CONFIG_FREQUENCY - Frequency // <26738688=> 100k // <67108864=> 250k // <104857600=> 400k #ifndef TWI_DEFAULT_CONFIG_FREQUENCY #define TWI_DEFAULT_CONFIG_FREQUENCY 104857600 #endif // TWI_DEFAULT_CONFIG_CLR_BUS_INIT - Enables bus clearing procedure during init #ifndef TWI_DEFAULT_CONFIG_CLR_BUS_INIT #define TWI_DEFAULT_CONFIG_CLR_BUS_INIT 0 #endif // TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit #ifndef TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT #define TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0 #endif // TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice // <0=> 0 (highest) // <1=> 1 // <2=> 2 // <3=> 3 // <4=> 4 // <5=> 5 // <6=> 6 // <7=> 7 #ifndef TWI_DEFAULT_CONFIG_IRQ_PRIORITY #define TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7 #endif // TWI0_ENABLED - Enable TWI0 instance //========================================================== #ifndef TWI0_ENABLED #define TWI0_ENABLED 1 #endif // TWI0_USE_EASY_DMA - Use EasyDMA (if present) #ifndef TWI0_USE_EASY_DMA #define TWI0_USE_EASY_DMA 0 #endif // //========================================================== // //========================================================== // // //========================================================== // <<< end of configuration section >>> #endif //SDK_CONFIG_H