/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved. * * The information contained herein is property of Nordic Semiconductor ASA. * Terms and conditions of usage are described in detail in NORDIC * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. * * Licensees are granted free, non-transferable use of the information. NO * WARRANTY of ANY KIND is provided. This heading must NOT be removed from * the file. * */ /** @file * * @defgroup ble_sdk_app_hids_keyboard_main main.c * @{ * @ingroup ble_sdk_app_hids_keyboard * @brief HID Keyboard Sample Application main file. * * This file contains is the source code for a sample application using the HID, Battery and Device * Information Services for implementing a simple keyboard functionality. * Pressing Button 0 will send text 'hello' to the connected peer. On receiving output report, * it toggles the state of LED 2 on the mother board based on whether or not Caps Lock is on. * This application uses the @ref app_scheduler. * * Also it would accept pairing requests from any peer device. */ #include #include #include "nordic_common.h" #include "nrf.h" #include "nrf_assert.h" #include "app_error.h" #include "nrf_gpio.h" #include "ble.h" #include "ble_hci.h" #include "ble_srv_common.h" #include "ble_advertising.h" #include "ble_advdata.h" #include "ble_hids.h" #include "ble_bas.h" #include "ble_dis.h" #include "ble_conn_params.h" #include "bsp.h" #include "sensorsim.h" #include "bsp_btn_ble.h" #include "app_scheduler.h" #include "softdevice_handler_appsh.h" #include "app_timer_appsh.h" #include "peer_manager.h" #include "app_button.h" #include "fds.h" #include "fstorage.h" #include "ble_conn_state.h" #define NRF_LOG_MODULE_NAME "APP" #include "nrf_log.h" #include "nrf_log_ctrl.h" #if BUTTONS_NUMBER < 2 #error "Not enough resources on board" #endif #if (NRF_SD_BLE_API_VERSION == 3) #define NRF_BLE_MAX_MTU_SIZE GATT_MTU_SIZE_DEFAULT /**< MTU size used in the softdevice enabling and to reply to a BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event. */ #endif #define CENTRAL_LINK_COUNT 0 /**< Number of central links used by the application. When changing this number remember to adjust the RAM settings*/ #define PERIPHERAL_LINK_COUNT 1 /**< Number of peripheral links used by the application. When changing this number remember to adjust the RAM settings*/ #define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */ #define UART_RX_BUF_SIZE 1 /**< UART RX buffer size. */ #define KEY_PRESS_BUTTON_ID 0 /**< Button used as Keyboard key press. */ #define SHIFT_BUTTON_ID 1 /**< Button used as 'SHIFT' Key. */ #define DEVICE_NAME "Moxi_Keyboard" /**< Name of device. Will be included in the advertising data. */ #define MANUFACTURER_NAME "Moxi Ltd" /**< Manufacturer. Will be passed to Device Information Service. */ #define APP_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. */ #define APP_TIMER_OP_QUEUE_SIZE 4 /**< Size of timer operation queues. */ #define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(2000, APP_TIMER_PRESCALER) /**< Battery level measurement interval (ticks). */ #define MIN_BATTERY_LEVEL 81 /**< Minimum simulated battery level. */ #define MAX_BATTERY_LEVEL 100 /**< Maximum simulated battery level. */ #define BATTERY_LEVEL_INCREMENT 1 /**< Increment between each simulated battery level measurement. */ #define PNP_ID_VENDOR_ID_SOURCE 0x02 /**< Vendor ID Source. */ #define PNP_ID_VENDOR_ID 0x1915 /**< Vendor ID. */ #define PNP_ID_PRODUCT_ID 0xEEEE /**< Product ID. */ #define PNP_ID_PRODUCT_VERSION 0x0001 /**< Product Version. */ #define APP_ADV_FAST_INTERVAL 0x0028 /**< Fast advertising interval (in units of 0.625 ms. This value corresponds to 25 ms.). */ #define APP_ADV_SLOW_INTERVAL 0x0C80 /**< Slow advertising interval (in units of 0.625 ms. This value corrsponds to 2 seconds). */ #define APP_ADV_FAST_TIMEOUT 30 /**< The duration of the fast advertising period (in seconds). */ #define APP_ADV_SLOW_TIMEOUT 180 /**< The duration of the slow advertising period (in seconds). */ /*lint -emacro(524, MIN_CONN_INTERVAL) // Loss of precision */ #define MIN_CONN_INTERVAL MSEC_TO_UNITS(7.5, UNIT_1_25_MS) /**< Minimum connection interval (7.5 ms) */ #define MAX_CONN_INTERVAL MSEC_TO_UNITS(30, UNIT_1_25_MS) /**< Maximum connection interval (30 ms). */ #define SLAVE_LATENCY 6 /**< Slave latency. */ #define CONN_SUP_TIMEOUT MSEC_TO_UNITS(430, UNIT_10_MS) /**< Connection supervisory timeout (430 ms). */ #define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */ #define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000, APP_TIMER_PRESCALER) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */ #define MAX_CONN_PARAMS_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */ #define SEC_PARAM_BOND 1 /**< Perform bonding. */ #define SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ #define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */ #define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */ #define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ #define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ #define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ #define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */ #define KEYBOARD_ENABLE 1 #define MULTTOUCH_ENABLE 0 #if MULTTOUCH_ENABLE #define INPUT_REP_TOUCH_INDEX 0 #define INPUT_REP_TOUCH_LEN 13 #define INPUT_REP_TOUCH_ID 1 #define INPUT_REP_KEYBOARD_INDEX 1 /**< Index of Input Report. */ #define INPUT_REP_KEYBOARD_MAX_LEN 8 /**< Maximum length of the Input Report characteristic. */ #define INPUT_REP_KEYBOARD_ID 2 /**< Id of reference to Keyboard Input Report. */ #define INPUT_REP_CNT 2 #else #define INPUT_REP_KEYBOARD_INDEX 0 /**< Index of Input Report. */ #define INPUT_REP_KEYBOARD_MAX_LEN 8 /**< Maximum length of the Input Report characteristic. */ #define INPUT_REP_KEYBOARD_ID 1 /**< Id of reference to Keyboard Input Report. */ #define INPUT_REP_MOUSE_INDEX 1 #define INPUT_REP_MOUSE_MAX_LEN 6 #define INPUT_REP_MOUSE_ID 2 #define INPUT_REP_ZOOM_INDEX 2 #define INPUT_REP_ZOOM_MAX_LEN 1 #define INPUT_REP_ZOOM_ID 3 #define INPUT_REP_CNT 3 #endif #define OUTPUT_REP_KEYBOARD_INDEX 0 /**< Index of Output Report. */ #define OUTPUT_REP_KEYBOARD_MAX_LEN 1 /**< Maximum length of Output Report. */ #define OUTPUT_REP_KEYBOARD_ID 0 /**< Id of reference to Keyboard Output Report. */ #define OUTPUT_REPORT_BIT_MASK_CAPS_LOCK 0x02 /**< CAPS LOCK bit in Output Report (based on 'LED Page (0x08)' of the Universal Serial Bus HID Usage Tables). */ #define OUTPUT_REP_CNT 1 #define APP_FEATURE_NOT_SUPPORTED BLE_GATT_STATUS_ATTERR_APP_BEGIN + 2 /**< Reply when unsupported features are requested. */ #define MAX_BUFFER_ENTRIES 5 /**< Number of elements that can be enqueued */ #define BASE_USB_HID_SPEC_VERSION 0x0101 /**< Version number of base USB HID Specification implemented by this application. */ #define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */ #define SCHED_MAX_EVENT_DATA_SIZE MAX(APP_TIMER_SCHED_EVT_SIZE, \ BLE_STACK_HANDLER_SCHED_EVT_SIZE) /**< Maximum size of scheduler events. */ #ifdef SVCALL_AS_NORMAL_FUNCTION #define SCHED_QUEUE_SIZE 20 /**< Maximum number of events in the scheduler queue. More is needed in case of Serialization. */ #else #define SCHED_QUEUE_SIZE 10 /**< Maximum number of events in the scheduler queue. */ #endif #define MODIFIER_KEY_POS 0 /**< Position of the modifier byte in the Input Report. */ #define SCAN_CODE_POS 2 /**< This macro indicates the start position of the key scan code in a HID Report. As per the document titled 'Device Class Definition for Human Interface Devices (HID) V1.11, each report shall have one modifier byte followed by a reserved constant byte and then the key scan code. */ #define SHIFT_KEY_CODE 0x02 /**< Key code indicating the press of the Shift Key. */ #define LEFT_CTRL_KEY_CODE 0x01 #define LEFT_SHIFT_KEY_CODE 0x02 #define LEFT_ALT_KEY_CODE 0x04 #define LEFT_GUI_KEY_CODE 0x08 #define RIGHT_CTRL_KEY_CODE 0x10 #define RIGHT_SHIFT_KEY_CODE 0x20 #define RIGHT_ALT_KEY_CODE 0x40 #define RIGHT_GUI_KEY_CODE 0x80 #define MAX_KEYS_IN_ONE_REPORT (INPUT_REP_KEYBOARD_MAX_LEN - SCAN_CODE_POS) /**< Maximum number of key presses that can be sent in one Input Report. */ /**Buffer queue access macros * * @{ */ /** Initialization of buffer list */ #define BUFFER_LIST_INIT() \ do \ { \ buffer_list.rp = 0; \ buffer_list.wp = 0; \ buffer_list.count = 0; \ } while (0) /** Provide status of data list is full or not */ #define BUFFER_LIST_FULL() \ ((MAX_BUFFER_ENTRIES == buffer_list.count - 1) ? true : false) /** Provides status of buffer list is empty or not */ #define BUFFER_LIST_EMPTY() \ ((0 == buffer_list.count) ? true : false) #define BUFFER_ELEMENT_INIT(i) \ do \ { \ buffer_list.buffer[(i)].p_data = NULL; \ } while (0) /** @} */ typedef enum { BLE_NO_ADV, /**< No advertising running. */ BLE_DIRECTED_ADV, /**< Direct advertising to the latest central. */ BLE_FAST_ADV_WHITELIST, /**< Advertising with whitelist. */ BLE_FAST_ADV, /**< Fast advertising running. */ BLE_SLOW_ADV, /**< Slow advertising running. */ BLE_SLEEP, /**< Go to system-off. */ } ble_advertising_mode_t; /** Abstracts buffer element */ typedef struct hid_key_buffer { uint8_t data_offset; /**< Max Data that can be buffered for all entries */ uint8_t data_len; /**< Total length of data */ uint8_t * p_data; /**< Scanned key pattern */ ble_hids_t * p_instance; /**< Identifies peer and service instance */ } buffer_entry_t; STATIC_ASSERT(sizeof(buffer_entry_t) % 4 == 0); /** Circular buffer list */ typedef struct { buffer_entry_t buffer[MAX_BUFFER_ENTRIES]; /**< Maximum number of entries that can enqueued in the list */ uint8_t rp; /**< Index to the read location */ uint8_t wp; /**< Index to write location */ uint8_t count; /**< Number of elements in the list */ } buffer_list_t; STATIC_ASSERT(sizeof(buffer_list_t) % 4 == 0); static ble_hids_t m_hids; /**< Structure used to identify the HID service. */ static ble_bas_t m_bas; /**< Structure used to identify the battery service. */ static bool m_in_boot_mode = false; /**< Current protocol mode. */ static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */ static sensorsim_cfg_t m_battery_sim_cfg; /**< Battery Level sensor simulator configuration. */ static sensorsim_state_t m_battery_sim_state; /**< Battery Level sensor simulator state. */ APP_TIMER_DEF(m_battery_timer_id); /**< Battery timer. */ APP_TIMER_DEF(m_hid_button_timer_id); /**< Button timer. */ static pm_peer_id_t m_peer_id; /**< Device reference handle to the current bonded central. */ static bool m_caps_on = false; /**< Variable to indicate if Caps Lock is turned on. */ static pm_peer_id_t m_whitelist_peers[BLE_GAP_WHITELIST_ADDR_MAX_COUNT]; /**< List of peers currently in the whitelist. */ static uint32_t m_whitelist_peer_cnt; /**< Number of peers currently in the whitelist. */ static bool m_is_wl_changed; /**< Indicates if the whitelist has been changed since last time it has been updated in the Peer Manager. */ static ble_uuid_t m_adv_uuids[] = {{BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE, BLE_UUID_TYPE_BLE}}; /**< key code array. */ static uint8_t m_key_code[][14] = { /*ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 CF5 */ {0x29, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x00}, /*` 1 2 3 4 5 6 7 8 9 0 - = Backspace*/ {0x32, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x2D, 0x2E, 0x2A}, /*Tab Q W E R T Y U I O P [ ] Return*/ {0x2B, 0x14, 0x1A, 0x08, 0x15, 0x17, 0x1C, 0x18, 0x0C, 0x12, 0x13, 0x2F, 0x30, 0x28}, /*Caps A S D F G H J K L ; " null null*/ {0x39, 0x04, 0x16, 0x07, 0x09, 0x0A, 0x0B, 0x0D, 0x0E, 0x0F, 0x33, 0x34, 0x2C, 0x2C}, /*Shift Z X C V B N M , . ? UP \ null*/ {0xE1, 0x1D, 0x1B, 0x06, 0x19, 0x06, 0x11, 0x10, 0x36, 0x37, 0x38, 0x52, 0x31, 0x2C}, /*Ctrl wins FN ALT Spa Spa Spa Spa ALT null DEL left down rifgt*/ {0xE0, 0x0, 0x0, 0xE2, 0x2C, 0x2C, 0x2C, 0x2C, 0xE6, 0x00, 0x4C, 0x50, 0x51, 0x4F}, }; static uint8_t m_sample_key_press_scan_str1[] = /**< Key pattern to be sent when the key press button has been pushed. */ { 0x0b, /* Key h */ 0x08, /* Key e */ 0x0f, /* Key l */ 0x0f, /* Key l */ 0x12, /* Key o */ 0x28 /* Key Return */ }; static uint8_t m_sample_key_press_scan_str[] = {0x32, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x2D, 0x2E, 0x2A}; /* 0x2B, 0x14, 0x1A, 0x08, 0x15, 0x17, 0x1C, 0x18, 0x0C, 0x12, 0x13, 0x2F, 0x30, 0x28, 0x04, 0x16, 0x07, 0x09, 0x0A, 0x0B, 0x0D, 0x0E, 0x0F, 0x33, 0x34, 0x2C, 0x2C, 0xE1, 0x1D, 0x1B, 0x06, 0x19, 0x06, 0x11, 0x10, 0x36, 0x37, 0x38, 0x52, 0x31, 0x2C}; */ static uint8_t m_caps_on_key_scan_str[] = /**< Key pattern to be sent when the output report has been written with the CAPS LOCK bit set. */ { 0x06, /* Key C */ 0x04, /* Key a */ 0x13, /* Key p */ 0x16, /* Key s */ 0x12, /* Key o */ 0x11, /* Key n */ }; static uint8_t m_caps_off_key_scan_str[] = /**< Key pattern to be sent when the output report has been written with the CAPS LOCK bit cleared. */ { 0x06, /* Key C */ 0x04, /* Key a */ 0x13, /* Key p */ 0x16, /* Key s */ 0x12, /* Key o */ 0x09, /* Key f */ }; static volatile uint8_t g_modifier_key_bit = 0; // This enum is mapped to "rep_map_data[]", Report ID 3. // Please see the USB descriptor for detailed information. typedef enum { MM_KEY_RELEASE = 0x00, MM_KEY_PLAY_PAUSE = 0x01, MM_KEY_AL_CCC = 0x02, MM_KEY_SCAN_NEXT_TRACK = 0x04, MM_KEY_SCAN_PREV_TRACK = 0x08, MM_KEY_VOL_DOWN = 0x10, MM_KEY_VOL_UP = 0x20, MM_KEY_AC_FORWARD = 0x40, MM_KEY_AC_BACK = 0x80, } multimedia_keys_t; #define BUTTON_DETECTION_DELAY APP_TIMER_TICKS(50, APP_TIMER_PRESCALER) /**< Delay from a GPIOTE event until a button is reported as pushed (in number of timer ticks). */ /** List to enqueue not just data to be sent, but also related information like the handle, connection handle etc */ static buffer_list_t buffer_list; static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t * p_evt); /**@brief Callback function for asserts in the SoftDevice. * * @details This function will be called in case of an assert in the SoftDevice. * * @warning This handler is an example only and does not fit a final product. You need to analyze * how your product is supposed to react in case of Assert. * @warning On assert from the SoftDevice, the system can only recover on reset. * * @param[in] line_num Line number of the failing ASSERT call. * @param[in] file_name File name of the failing ASSERT call. */ void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name) { app_error_handler(DEAD_BEEF, line_num, p_file_name); } /**@brief Fetch the list of peer manager peer IDs. * * @param[inout] p_peers The buffer where to store the list of peer IDs. * @param[inout] p_size In: The size of the @p p_peers buffer. * Out: The number of peers copied in the buffer. */ static void peer_list_get(pm_peer_id_t * p_peers, uint32_t * p_size) { pm_peer_id_t peer_id; uint32_t peers_to_copy; peers_to_copy = (*p_size < BLE_GAP_WHITELIST_ADDR_MAX_COUNT) ? *p_size : BLE_GAP_WHITELIST_ADDR_MAX_COUNT; peer_id = pm_next_peer_id_get(PM_PEER_ID_INVALID); *p_size = 0; while ((peer_id != PM_PEER_ID_INVALID) && (peers_to_copy--)) { p_peers[(*p_size)++] = peer_id; peer_id = pm_next_peer_id_get(peer_id); } } /**@brief Function for starting advertising. */ static void advertising_start(void) { ret_code_t ret; memset(m_whitelist_peers, PM_PEER_ID_INVALID, sizeof(m_whitelist_peers)); m_whitelist_peer_cnt = (sizeof(m_whitelist_peers) / sizeof(pm_peer_id_t)); peer_list_get(m_whitelist_peers, &m_whitelist_peer_cnt); ret = pm_whitelist_set(m_whitelist_peers, m_whitelist_peer_cnt); APP_ERROR_CHECK(ret); // Setup the device identies list. // Some SoftDevices do not support this feature. ret = pm_device_identities_list_set(m_whitelist_peers, m_whitelist_peer_cnt); if (ret != NRF_ERROR_NOT_SUPPORTED) { APP_ERROR_CHECK(ret); } m_is_wl_changed = false; ret = ble_advertising_start(BLE_ADV_MODE_FAST); APP_ERROR_CHECK(ret); } /**@brief Function for handling Peer Manager events. * * @param[in] p_evt Peer Manager event. */ static void pm_evt_handler(pm_evt_t const * p_evt) { ret_code_t err_code; switch (p_evt->evt_id) { case PM_EVT_BONDED_PEER_CONNECTED: { NRF_LOG_INFO("Connected to a previously bonded device.\r\n"); } break; case PM_EVT_CONN_SEC_SUCCEEDED: { NRF_LOG_INFO("Connection secured. Role: %d. conn_handle: %d, Procedure: %d\r\n", ble_conn_state_role(p_evt->conn_handle), p_evt->conn_handle, p_evt->params.conn_sec_succeeded.procedure); m_peer_id = p_evt->peer_id; // Note: You should check on what kind of white list policy your application should use. if (p_evt->params.conn_sec_succeeded.procedure == PM_LINK_SECURED_PROCEDURE_BONDING) { NRF_LOG_INFO("New Bond, add the peer to the whitelist if possible\r\n"); NRF_LOG_INFO("\tm_whitelist_peer_cnt %d, MAX_PEERS_WLIST %d\r\n", m_whitelist_peer_cnt + 1, BLE_GAP_WHITELIST_ADDR_MAX_COUNT); if (m_whitelist_peer_cnt < BLE_GAP_WHITELIST_ADDR_MAX_COUNT) { // Bonded to a new peer, add it to the whitelist. m_whitelist_peers[m_whitelist_peer_cnt++] = m_peer_id; m_is_wl_changed = true; } } } break; case PM_EVT_CONN_SEC_FAILED: { /* Often, when securing fails, it shouldn't be restarted, for security reasons. * Other times, it can be restarted directly. * Sometimes it can be restarted, but only after changing some Security Parameters. * Sometimes, it cannot be restarted until the link is disconnected and reconnected. * Sometimes it is impossible, to secure the link, or the peer device does not support it. * How to handle this error is highly application dependent. */ } break; case PM_EVT_CONN_SEC_CONFIG_REQ: { // Reject pairing request from an already bonded peer. pm_conn_sec_config_t conn_sec_config = {.allow_repairing = false}; pm_conn_sec_config_reply(p_evt->conn_handle, &conn_sec_config); } break; case PM_EVT_STORAGE_FULL: { // Run garbage collection on the flash. err_code = fds_gc(); if (err_code == FDS_ERR_BUSY || err_code == FDS_ERR_NO_SPACE_IN_QUEUES) { // Retry. } else { APP_ERROR_CHECK(err_code); } } break; case PM_EVT_PEERS_DELETE_SUCCEEDED: { advertising_start(); } break; case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED: { // The local database has likely changed, send service changed indications. pm_local_database_has_changed(); } break; case PM_EVT_PEER_DATA_UPDATE_FAILED: { // Assert. APP_ERROR_CHECK(p_evt->params.peer_data_update_failed.error); } break; case PM_EVT_PEER_DELETE_FAILED: { // Assert. APP_ERROR_CHECK(p_evt->params.peer_delete_failed.error); } break; case PM_EVT_PEERS_DELETE_FAILED: { // Assert. APP_ERROR_CHECK(p_evt->params.peers_delete_failed_evt.error); } break; case PM_EVT_ERROR_UNEXPECTED: { // Assert. APP_ERROR_CHECK(p_evt->params.error_unexpected.error); } break; case PM_EVT_CONN_SEC_START: case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED: case PM_EVT_PEER_DELETE_SUCCEEDED: case PM_EVT_LOCAL_DB_CACHE_APPLIED: case PM_EVT_SERVICE_CHANGED_IND_SENT: case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED: default: break; } } /**@brief Function for handling Service errors. * * @details A pointer to this function will be passed to each service which may need to inform the * application about an error. * * @param[in] nrf_error Error code containing information about what went wrong. */ static void service_error_handler(uint32_t nrf_error) { APP_ERROR_HANDLER(nrf_error); } /**@brief Function for handling advertising errors. * * @param[in] nrf_error Error code containing information about what went wrong. */ static void ble_advertising_error_handler(uint32_t nrf_error) { APP_ERROR_HANDLER(nrf_error); } /**@brief Function for performing a battery measurement, and update the Battery Level characteristic in the Battery Service. */ static void battery_level_update(void) { uint32_t err_code; uint8_t battery_level; battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg); err_code = ble_bas_battery_level_update(&m_bas, battery_level); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) ) { APP_ERROR_HANDLER(err_code); } } /**@brief Function for handling the Battery measurement timer timeout. * * @details This function will be called each time the battery level measurement timer expires. * * @param[in] p_context Pointer used for passing some arbitrary information (context) from the * app_start_timer() call to the timeout handler. */ static void battery_level_meas_timeout_handler(void * p_context) { UNUSED_PARAMETER(p_context); battery_level_update(); } static void hid_button_timeout_handler(void * p_context) { UNUSED_PARAMETER(p_context); multimedia_keys_t mm_key_release = MM_KEY_RELEASE; uint32_t err_code; // Send release for multimedia key err_code = ble_hids_inp_rep_send(&m_hids, 0, INPUT_REP_ZOOM_MAX_LEN, (uint8_t*)&mm_key_release); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) ) { APP_ERROR_CHECK(err_code); } NRF_LOG_INFO("send media release key.\n"); } /**@brief Function for the Timer initialization. * * @details Initializes the timer module. */ static void timers_init(void) { uint32_t err_code; // Initialize timer module, making it use the scheduler. APP_TIMER_APPSH_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, true); // Create battery timer. err_code = app_timer_create(&m_battery_timer_id, APP_TIMER_MODE_REPEATED, battery_level_meas_timeout_handler); APP_ERROR_CHECK(err_code); err_code = app_timer_create(&m_hid_button_timer_id, APP_TIMER_MODE_SINGLE_SHOT, hid_button_timeout_handler); APP_ERROR_CHECK(err_code); } /**@brief Function for the GAP initialization. * * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the * device including the device name, appearance, and the preferred connection parameters. */ static void gap_params_init(void) { uint32_t err_code; ble_gap_conn_params_t gap_conn_params; ble_gap_conn_sec_mode_t sec_mode; BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)DEVICE_NAME, strlen(DEVICE_NAME)); APP_ERROR_CHECK(err_code); err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_HID_KEYBOARD); APP_ERROR_CHECK(err_code); memset(&gap_conn_params, 0, sizeof(gap_conn_params)); gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL; gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL; gap_conn_params.slave_latency = SLAVE_LATENCY; gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT; err_code = sd_ble_gap_ppcp_set(&gap_conn_params); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing Device Information Service. */ static void dis_init(void) { uint32_t err_code; ble_dis_init_t dis_init_obj; ble_dis_pnp_id_t pnp_id; pnp_id.vendor_id_source = PNP_ID_VENDOR_ID_SOURCE; pnp_id.vendor_id = PNP_ID_VENDOR_ID; pnp_id.product_id = PNP_ID_PRODUCT_ID; pnp_id.product_version = PNP_ID_PRODUCT_VERSION; memset(&dis_init_obj, 0, sizeof(dis_init_obj)); ble_srv_ascii_to_utf8(&dis_init_obj.manufact_name_str, MANUFACTURER_NAME); dis_init_obj.p_pnp_id = &pnp_id; BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&dis_init_obj.dis_attr_md.read_perm); BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init_obj.dis_attr_md.write_perm); err_code = ble_dis_init(&dis_init_obj); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing Battery Service. */ static void bas_init(void) { uint32_t err_code; ble_bas_init_t bas_init_obj; memset(&bas_init_obj, 0, sizeof(bas_init_obj)); bas_init_obj.evt_handler = NULL; bas_init_obj.support_notification = true; bas_init_obj.p_report_ref = NULL; bas_init_obj.initial_batt_level = 100; BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&bas_init_obj.battery_level_char_attr_md.cccd_write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&bas_init_obj.battery_level_char_attr_md.read_perm); BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init_obj.battery_level_char_attr_md.write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&bas_init_obj.battery_level_report_read_perm); err_code = ble_bas_init(&m_bas, &bas_init_obj); APP_ERROR_CHECK(err_code); } #define INPUT_CCONTROL_KEYS_INDEX 0 #define INPUT_CC_REP_REF_ID 1 #define INPUT_CC_REPORT_KEYS_MAX_LEN 1 static void hids_init(void) { ret_code_t err_code; ble_hids_init_t hids_init_obj; ble_hids_inp_rep_init_t input_report_array[2]; ble_hids_inp_rep_init_t * p_input_report; ble_hids_outp_rep_init_t output_report_array[1]; ble_hids_outp_rep_init_t * p_output_report; uint8_t hid_info_flags; memset((void *)input_report_array, 0, sizeof(ble_hids_inp_rep_init_t)); memset((void *)output_report_array, 0, sizeof(ble_hids_outp_rep_init_t)); static uint8_t report_map_data[] = { // Report ID 1: Advanced buttons 0x05, 0x0C, // Usage Page (Consumer) 0x09, 0x01, // Usage (Consumer Control) 0xA1, 0x01, // Collection (Application) 0x85, 0x01, // Report Id (1) 0x15, 0x00, // Logical minimum (0) 0x25, 0x01, // Logical maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x01, // Report Count (1) 0x09, 0xCD, // Usage (Play/Pause) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x0A, 0x83, 0x01, // Usage (AL Consumer Control Configuration) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x09, 0xB5, // Usage (Scan Next Track) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x09, 0xB6, // Usage (Scan Previous Track) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x09, 0xEA, // Usage (Volume Down) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x09, 0xE9, // Usage (Volume Up) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x0A, 0x25, 0x02, // Usage (AC Forward) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0x0A, 0x24, 0x02, // Usage (AC Back) 0x81, 0x02, // Input (Data,Value,Relative,Bit Field) 0xC0, // End Collection //-----------------------¼üÅ̲¿·Ö±¨¸æÃèÊö·û---------------------------- 0x05, 0x01, // Usage Page (Generic Desktop) 0x09, 0x06, // Usage (Keyboard) 0xA1, 0x01, // Collection (Application) 0x85, 0x02, // Report ID (2) 0x05, 0x07, // Usage Page (Key Codes) 0x19, 0xe0, // Usage Minimum (224) 0x29, 0xe7, // Usage Maximum (231) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x08, // Report Count (8) 0x81, 0x02, // Input (Data, Variable, Absolute) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0x81, 0x01, // Input (Constant) reserved byte(1) 0x95, 0x05, // Report Count (5) 0x75, 0x01, // Report Size (1) 0x05, 0x08, // Usage Page (Page# for LEDs) 0x19, 0x01, // Usage Minimum (1) 0x29, 0x05, // Usage Maximum (5) 0x91, 0x02, // Output (Data, Variable, Absolute), Led report 0x95, 0x01, // Report Count (1) 0x75, 0x03, // Report Size (3) 0x91, 0x01, // Output (Data, Variable, Absolute), Led report padding 0x95, 0x06, // Report Count (6) 0x75, 0x08, // Report Size (8) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x65, // Logical Maximum (101) 0x05, 0x07, // Usage Page (Key codes) 0x19, 0x00, // Usage Minimum (0) 0x29, 0x65, // Usage Maximum (101) 0x81, 0x00, // Input (Data, Array) Key array(6 bytes) 0x09, 0x05, // Usage (Vendor Defined) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Count (2) 0x95, 0x02, // Report Size (8 bit) 0xB1, 0x02, // Feature (Data, Variable, Absolute) 0xC0 // End Collection (Application) }; // Initialize HID Service p_input_report = &input_report_array[1]; p_input_report->max_len = 8; p_input_report->rep_ref.report_id = 2; p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT; BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.cccd_write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.read_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.write_perm); p_output_report = &output_report_array[0]; p_output_report->max_len = 1; p_output_report->rep_ref.report_id = 0; p_output_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_OUTPUT; BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_output_report->security_mode.read_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_output_report->security_mode.write_perm); // Initialize HID Service - ConsumerControl p_input_report = &input_report_array[INPUT_CCONTROL_KEYS_INDEX]; p_input_report->max_len = INPUT_CC_REPORT_KEYS_MAX_LEN; p_input_report->rep_ref.report_id = INPUT_CC_REP_REF_ID; p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT; BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.cccd_write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.read_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&p_input_report->security_mode.write_perm); hid_info_flags = HID_INFO_FLAG_REMOTE_WAKE_MSK | HID_INFO_FLAG_NORMALLY_CONNECTABLE_MSK; memset(&hids_init_obj, 0, sizeof(hids_init_obj)); hids_init_obj.evt_handler = on_hids_evt; hids_init_obj.error_handler = service_error_handler; hids_init_obj.is_kb = true; hids_init_obj.is_mouse = false; hids_init_obj.inp_rep_count = 2; hids_init_obj.p_inp_rep_array = input_report_array; hids_init_obj.outp_rep_count = 1; hids_init_obj.p_outp_rep_array = output_report_array; hids_init_obj.feature_rep_count = 0; hids_init_obj.p_feature_rep_array = NULL; hids_init_obj.rep_map.data_len = sizeof(report_map_data); hids_init_obj.rep_map.p_data = report_map_data; hids_init_obj.hid_information.bcd_hid = BASE_USB_HID_SPEC_VERSION; hids_init_obj.hid_information.b_country_code = 0; hids_init_obj.hid_information.flags = hid_info_flags; hids_init_obj.included_services_count = 0; hids_init_obj.p_included_services_array = NULL; BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.rep_map.security_mode.read_perm); BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.rep_map.security_mode.write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.hid_information.security_mode.read_perm); BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.hid_information.security_mode.write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM( &hids_init_obj.security_mode_boot_kb_inp_rep.cccd_write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_boot_kb_inp_rep.read_perm); BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.security_mode_boot_kb_inp_rep.write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_boot_kb_outp_rep.read_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_boot_kb_outp_rep.write_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_protocol.read_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_protocol.write_perm); BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&hids_init_obj.security_mode_ctrl_point.read_perm); BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(&hids_init_obj.security_mode_ctrl_point.write_perm); err_code = ble_hids_init(&m_hids, &hids_init_obj); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing services that will be used by the application. */ static void services_init(void) { dis_init(); bas_init(); hids_init(); } /**@brief Function for initializing the battery sensor simulator. */ static void sensor_simulator_init(void) { m_battery_sim_cfg.min = MIN_BATTERY_LEVEL; m_battery_sim_cfg.max = MAX_BATTERY_LEVEL; m_battery_sim_cfg.incr = BATTERY_LEVEL_INCREMENT; m_battery_sim_cfg.start_at_max = true; sensorsim_init(&m_battery_sim_state, &m_battery_sim_cfg); } /**@brief Function for handling a Connection Parameters error. * * @param[in] nrf_error Error code containing information about what went wrong. */ static void conn_params_error_handler(uint32_t nrf_error) { APP_ERROR_HANDLER(nrf_error); } /**@brief Function for initializing the Connection Parameters module. */ static void conn_params_init(void) { uint32_t err_code; ble_conn_params_init_t cp_init; memset(&cp_init, 0, sizeof(cp_init)); cp_init.p_conn_params = NULL; cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY; cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY; cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT; cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID; cp_init.disconnect_on_fail = false; cp_init.evt_handler = NULL; cp_init.error_handler = conn_params_error_handler; err_code = ble_conn_params_init(&cp_init); APP_ERROR_CHECK(err_code); } /**@brief Function for starting timers. */ static void timers_start(void) { uint32_t err_code; err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL); APP_ERROR_CHECK(err_code); } /**@brief Function for transmitting a key scan Press & Release Notification. * * @warning This handler is an example only. You need to analyze how you wish to send the key * release. * * @param[in] p_instance Identifies the service for which Key Notifications are requested. * @param[in] p_key_pattern Pointer to key pattern. * @param[in] pattern_len Length of key pattern. 0 < pattern_len < 7. * @param[in] pattern_offset Offset applied to Key Pattern for transmission. * @param[out] actual_len Provides actual length of Key Pattern transmitted, making buffering of * rest possible if needed. * @return NRF_SUCCESS on success, BLE_ERROR_NO_TX_PACKETS in case transmission could not be * completed due to lack of transmission buffer or other error codes indicating reason * for failure. * * @note In case of BLE_ERROR_NO_TX_PACKETS, remaining pattern that could not be transmitted * can be enqueued \ref buffer_enqueue function. * In case a pattern of 'cofFEe' is the p_key_pattern, with pattern_len as 6 and * pattern_offset as 0, the notifications as observed on the peer side would be * 1> 'c', 'o', 'f', 'F', 'E', 'e' * 2> - , 'o', 'f', 'F', 'E', 'e' * 3> - , -, 'f', 'F', 'E', 'e' * 4> - , -, -, 'F', 'E', 'e' * 5> - , -, -, -, 'E', 'e' * 6> - , -, -, -, -, 'e' * 7> - , -, -, -, -, - * Here, '-' refers to release, 'c' refers to the key character being transmitted. * Therefore 7 notifications will be sent. * In case an offset of 4 was provided, the pattern notifications sent will be from 5-7 * will be transmitted. */ static uint32_t send_key_scan_press_release(ble_hids_t * p_hids, uint8_t * p_key_pattern, uint16_t pattern_len, uint16_t pattern_offset, uint16_t * p_actual_len) { uint32_t err_code; uint16_t offset; uint16_t data_len; uint8_t data[INPUT_REP_KEYBOARD_MAX_LEN]; // HID Report Descriptor enumerates an array of size 6, the pattern hence shall not be any // longer than this. STATIC_ASSERT((INPUT_REP_KEYBOARD_MAX_LEN - 2) == 6); ASSERT(pattern_len <= (INPUT_REP_KEYBOARD_MAX_LEN - 2)); offset = pattern_offset; data_len = pattern_len; do { // Reset the data buffer. memset(data, 0, sizeof(data)); // Copy the scan code. memcpy(data + SCAN_CODE_POS + offset, p_key_pattern + offset, data_len - offset); #if 0 if (bsp_button_is_pressed(SHIFT_BUTTON_ID)) { data[MODIFIER_KEY_POS] |= SHIFT_KEY_CODE; } #else if (g_modifier_key_bit) { data[MODIFIER_KEY_POS] |= g_modifier_key_bit; g_modifier_key_bit = 0; } #endif NRF_LOG_INFO("key=%d, %d\n", data[0], data[2]); if (!m_in_boot_mode) { err_code = ble_hids_inp_rep_send(p_hids, 1, 8, data); } else { err_code = ble_hids_boot_kb_inp_rep_send(p_hids, INPUT_REP_KEYBOARD_MAX_LEN, data); } if (err_code != NRF_SUCCESS) { break; } offset++; } while (offset <= data_len); *p_actual_len = offset; return err_code; } /**@brief Function for initializing the buffer queue used to key events that could not be * transmitted * * @warning This handler is an example only. You need to analyze how you wish to buffer or buffer at * all. * * @note In case of HID keyboard, a temporary buffering could be employed to handle scenarios * where encryption is not yet enabled or there was a momentary link loss or there were no * Transmit buffers. */ static void buffer_init(void) { uint32_t buffer_count; BUFFER_LIST_INIT(); for (buffer_count = 0; buffer_count < MAX_BUFFER_ENTRIES; buffer_count++) { BUFFER_ELEMENT_INIT(buffer_count); } } /**@brief Function for enqueuing key scan patterns that could not be transmitted either completely * or partially. * * @warning This handler is an example only. You need to analyze how you wish to send the key * release. * * @param[in] p_hids Identifies the service for which Key Notifications are buffered. * @param[in] p_key_pattern Pointer to key pattern. * @param[in] pattern_len Length of key pattern. * @param[in] offset Offset applied to Key Pattern when requesting a transmission on * dequeue, @ref buffer_dequeue. * @return NRF_SUCCESS on success, else an error code indicating reason for failure. */ static uint32_t buffer_enqueue(ble_hids_t * p_hids, uint8_t * p_key_pattern, uint16_t pattern_len, uint16_t offset) { buffer_entry_t * element; uint32_t err_code = NRF_SUCCESS; if (BUFFER_LIST_FULL()) { // Element cannot be buffered. err_code = NRF_ERROR_NO_MEM; } else { // Make entry of buffer element and copy data. element = &buffer_list.buffer[(buffer_list.wp)]; element->p_instance = p_hids; element->p_data = p_key_pattern; element->data_offset = offset; element->data_len = pattern_len; buffer_list.count++; buffer_list.wp++; if (buffer_list.wp == MAX_BUFFER_ENTRIES) { buffer_list.wp = 0; } } return err_code; } /**@brief Function to dequeue key scan patterns that could not be transmitted either completely of * partially. * * @warning This handler is an example only. You need to analyze how you wish to send the key * release. * * @param[in] tx_flag Indicative of whether the dequeue should result in transmission or not. * @note A typical example when all keys are dequeued with transmission is when link is * disconnected. * * @return NRF_SUCCESS on success, else an error code indicating reason for failure. */ static uint32_t buffer_dequeue(bool tx_flag) { buffer_entry_t * p_element; uint32_t err_code = NRF_SUCCESS; uint16_t actual_len; if (BUFFER_LIST_EMPTY()) { err_code = NRF_ERROR_NOT_FOUND; } else { bool remove_element = true; p_element = &buffer_list.buffer[(buffer_list.rp)]; if (tx_flag) { err_code = send_key_scan_press_release(p_element->p_instance, p_element->p_data, p_element->data_len, p_element->data_offset, &actual_len); // An additional notification is needed for release of all keys, therefore check // is for actual_len <= element->data_len and not actual_len < element->data_len if ((err_code == BLE_ERROR_NO_TX_PACKETS) && (actual_len <= p_element->data_len)) { // Transmission could not be completed, do not remove the entry, adjust next data to // be transmitted p_element->data_offset = actual_len; remove_element = false; } } if (remove_element) { BUFFER_ELEMENT_INIT(buffer_list.rp); buffer_list.rp++; buffer_list.count--; if (buffer_list.rp == MAX_BUFFER_ENTRIES) { buffer_list.rp = 0; } } } return err_code; } /**@brief Function for sending sample key presses to the peer. * * @param[in] key_pattern_len Pattern length. * @param[in] p_key_pattern Pattern to be sent. */ static void keys_send(uint8_t key_pattern_len, uint8_t * p_key_pattern) { uint32_t err_code; uint16_t actual_len; err_code = send_key_scan_press_release(&m_hids, p_key_pattern, key_pattern_len, 0, &actual_len); // An additional notification is needed for release of all keys, therefore check // is for actual_len <= key_pattern_len and not actual_len < key_pattern_len. if ((err_code == BLE_ERROR_NO_TX_PACKETS) && (actual_len <= key_pattern_len)) { // Buffer enqueue routine return value is not intentionally checked. // Rationale: Its better to have a a few keys missing than have a system // reset. Recommendation is to work out most optimal value for // MAX_BUFFER_ENTRIES to minimize chances of buffer queue full condition UNUSED_VARIABLE(buffer_enqueue(&m_hids, p_key_pattern, key_pattern_len, actual_len)); } if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) ) { APP_ERROR_HANDLER(err_code); } } /**@brief Function for handling the HID Report Characteristic Write event. * * @param[in] p_evt HID service event. */ static void on_hid_rep_char_write(ble_hids_evt_t * p_evt) { if (p_evt->params.char_write.char_id.rep_type == BLE_HIDS_REP_TYPE_OUTPUT) { uint32_t err_code; uint8_t report_val; uint8_t report_index = p_evt->params.char_write.char_id.rep_index; if (report_index == OUTPUT_REP_KEYBOARD_INDEX) { // This code assumes that the outptu report is one byte long. Hence the following // static assert is made. STATIC_ASSERT(OUTPUT_REP_KEYBOARD_MAX_LEN == 1); err_code = ble_hids_outp_rep_get(&m_hids, report_index, OUTPUT_REP_KEYBOARD_MAX_LEN, 0, &report_val); APP_ERROR_CHECK(err_code); if (!m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) != 0)) { // Caps Lock is turned On. NRF_LOG_INFO("Caps Lock is turned On!\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ALERT_3); APP_ERROR_CHECK(err_code); keys_send(sizeof(m_caps_on_key_scan_str), m_caps_on_key_scan_str); m_caps_on = true; } else if (m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) == 0)) { // Caps Lock is turned Off . NRF_LOG_INFO("Caps Lock is turned Off!\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF); APP_ERROR_CHECK(err_code); keys_send(sizeof(m_caps_off_key_scan_str), m_caps_off_key_scan_str); m_caps_on = false; } else { // The report received is not supported by this application. Do nothing. } } } } /**@brief Function for putting the chip into sleep mode. * * @note This function will not return. */ static void sleep_mode_enter(void) { uint32_t err_code = bsp_indication_set(BSP_INDICATE_IDLE); APP_ERROR_CHECK(err_code); // Prepare wakeup buttons. err_code = bsp_btn_ble_sleep_mode_prepare(); APP_ERROR_CHECK(err_code); // Go to system-off mode (this function will not return; wakeup will cause a reset). err_code = sd_power_system_off(); APP_ERROR_CHECK(err_code); } /**@brief Function for handling HID events. * * @details This function will be called for all HID events which are passed to the application. * * @param[in] p_hids HID service structure. * @param[in] p_evt Event received from the HID service. */ static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t * p_evt) { switch (p_evt->evt_type) { case BLE_HIDS_EVT_BOOT_MODE_ENTERED: m_in_boot_mode = true; break; case BLE_HIDS_EVT_REPORT_MODE_ENTERED: m_in_boot_mode = false; break; case BLE_HIDS_EVT_REP_CHAR_WRITE: on_hid_rep_char_write(p_evt); break; case BLE_HIDS_EVT_NOTIF_ENABLED: break; default: // No implementation needed. break; } } /**@brief Function for handling advertising events. * * @details This function will be called for advertising events which are passed to the application. * * @param[in] ble_adv_evt Advertising event. */ static void on_adv_evt(ble_adv_evt_t ble_adv_evt) { uint32_t err_code; switch (ble_adv_evt) { case BLE_ADV_EVT_DIRECTED: NRF_LOG_INFO("BLE_ADV_EVT_DIRECTED\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED); APP_ERROR_CHECK(err_code); break; //BLE_ADV_EVT_DIRECTED case BLE_ADV_EVT_FAST: NRF_LOG_INFO("BLE_ADV_EVT_FAST\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING); APP_ERROR_CHECK(err_code); break; //BLE_ADV_EVT_FAST case BLE_ADV_EVT_SLOW: NRF_LOG_INFO("BLE_ADV_EVT_SLOW\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW); APP_ERROR_CHECK(err_code); break; //BLE_ADV_EVT_SLOW case BLE_ADV_EVT_FAST_WHITELIST: NRF_LOG_INFO("BLE_ADV_EVT_FAST_WHITELIST\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST); APP_ERROR_CHECK(err_code); break; //BLE_ADV_EVT_FAST_WHITELIST case BLE_ADV_EVT_SLOW_WHITELIST: NRF_LOG_INFO("BLE_ADV_EVT_SLOW_WHITELIST\r\n"); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST); APP_ERROR_CHECK(err_code); break; //BLE_ADV_EVT_SLOW_WHITELIST case BLE_ADV_EVT_IDLE: sleep_mode_enter(); break; //BLE_ADV_EVT_IDLE case BLE_ADV_EVT_WHITELIST_REQUEST: { ble_gap_addr_t whitelist_addrs[BLE_GAP_WHITELIST_ADDR_MAX_COUNT]; ble_gap_irk_t whitelist_irks[BLE_GAP_WHITELIST_ADDR_MAX_COUNT]; uint32_t addr_cnt = BLE_GAP_WHITELIST_ADDR_MAX_COUNT; uint32_t irk_cnt = BLE_GAP_WHITELIST_ADDR_MAX_COUNT; err_code = pm_whitelist_get(whitelist_addrs, &addr_cnt, whitelist_irks, &irk_cnt); APP_ERROR_CHECK(err_code); NRF_LOG_DEBUG("pm_whitelist_get returns %d addr in whitelist and %d irk whitelist\r\n", addr_cnt, irk_cnt); // Apply the whitelist. err_code = ble_advertising_whitelist_reply(whitelist_addrs, addr_cnt, whitelist_irks, irk_cnt); APP_ERROR_CHECK(err_code); } break; //BLE_ADV_EVT_WHITELIST_REQUEST case BLE_ADV_EVT_PEER_ADDR_REQUEST: { pm_peer_data_bonding_t peer_bonding_data; // Only Give peer address if we have a handle to the bonded peer. if (m_peer_id != PM_PEER_ID_INVALID) { err_code = pm_peer_data_bonding_load(m_peer_id, &peer_bonding_data); if (err_code != NRF_ERROR_NOT_FOUND) { APP_ERROR_CHECK(err_code); ble_gap_addr_t * p_peer_addr = &(peer_bonding_data.peer_ble_id.id_addr_info); err_code = ble_advertising_peer_addr_reply(p_peer_addr); APP_ERROR_CHECK(err_code); } } } break; //BLE_ADV_EVT_PEER_ADDR_REQUEST default: break; } } /**@brief Function for handling the Application's BLE Stack events. * * @param[in] p_ble_evt Bluetooth stack event. */ static void on_ble_evt(ble_evt_t * p_ble_evt) { uint32_t err_code; switch (p_ble_evt->header.evt_id) { case BLE_GAP_EVT_CONNECTED: NRF_LOG_INFO("Connected\r\n"); err_code = bsp_indication_set(BSP_INDICATE_CONNECTED); APP_ERROR_CHECK(err_code); m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle; break; // BLE_GAP_EVT_CONNECTED case BLE_EVT_TX_COMPLETE: // Send next key event (void) buffer_dequeue(true); break; // BLE_EVT_TX_COMPLETE case BLE_GAP_EVT_DISCONNECTED: NRF_LOG_INFO("Disconnected\r\n"); // Dequeue all keys without transmission. (void) buffer_dequeue(false); m_conn_handle = BLE_CONN_HANDLE_INVALID; // Reset m_caps_on variable. Upon reconnect, the HID host will re-send the Output // report containing the Caps lock state. m_caps_on = false; // disabling alert 3. signal - used for capslock ON err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF); APP_ERROR_CHECK(err_code); if (m_is_wl_changed) { // The whitelist has been modified, update it in the Peer Manager. err_code = pm_whitelist_set(m_whitelist_peers, m_whitelist_peer_cnt); APP_ERROR_CHECK(err_code); err_code = pm_device_identities_list_set(m_whitelist_peers, m_whitelist_peer_cnt); if (err_code != NRF_ERROR_NOT_SUPPORTED) { APP_ERROR_CHECK(err_code); } m_is_wl_changed = false; } break; // BLE_GAP_EVT_DISCONNECTED case BLE_GATTC_EVT_TIMEOUT: // Disconnect on GATT Client timeout event. NRF_LOG_DEBUG("GATT Client Timeout.\r\n"); err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); APP_ERROR_CHECK(err_code); break; // BLE_GATTC_EVT_TIMEOUT case BLE_GATTS_EVT_TIMEOUT: // Disconnect on GATT Server timeout event. NRF_LOG_DEBUG("GATT Server Timeout.\r\n"); err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); APP_ERROR_CHECK(err_code); break; // BLE_GATTS_EVT_TIMEOUT case BLE_EVT_USER_MEM_REQUEST: err_code = sd_ble_user_mem_reply(m_conn_handle, NULL); APP_ERROR_CHECK(err_code); break; // BLE_EVT_USER_MEM_REQUEST case BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST: { ble_gatts_evt_rw_authorize_request_t req; ble_gatts_rw_authorize_reply_params_t auth_reply; req = p_ble_evt->evt.gatts_evt.params.authorize_request; if (req.type != BLE_GATTS_AUTHORIZE_TYPE_INVALID) { if ((req.request.write.op == BLE_GATTS_OP_PREP_WRITE_REQ) || (req.request.write.op == BLE_GATTS_OP_EXEC_WRITE_REQ_NOW) || (req.request.write.op == BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL)) { if (req.type == BLE_GATTS_AUTHORIZE_TYPE_WRITE) { auth_reply.type = BLE_GATTS_AUTHORIZE_TYPE_WRITE; } else { auth_reply.type = BLE_GATTS_AUTHORIZE_TYPE_READ; } auth_reply.params.write.gatt_status = APP_FEATURE_NOT_SUPPORTED; err_code = sd_ble_gatts_rw_authorize_reply(p_ble_evt->evt.gatts_evt.conn_handle, &auth_reply); APP_ERROR_CHECK(err_code); } } } break; // BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST #if (NRF_SD_BLE_API_VERSION == 3) case BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST: err_code = sd_ble_gatts_exchange_mtu_reply(p_ble_evt->evt.gatts_evt.conn_handle, NRF_BLE_MAX_MTU_SIZE); APP_ERROR_CHECK(err_code); break; // BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST #endif default: // No implementation needed. break; } } /**@brief Function for dispatching a BLE stack event to all modules with a BLE stack event handler. * * @details This function is called from the scheduler in the main loop after a BLE stack * event has been received. * * @param[in] p_ble_evt Bluetooth stack event. */ static void ble_evt_dispatch(ble_evt_t * p_ble_evt) { /** The Connection state module has to be fed BLE events in order to function correctly * Remember to call ble_conn_state_on_ble_evt before calling any ble_conns_state_* functions. */ ble_conn_state_on_ble_evt(p_ble_evt); pm_on_ble_evt(p_ble_evt); bsp_btn_ble_on_ble_evt(p_ble_evt); on_ble_evt(p_ble_evt); ble_advertising_on_ble_evt(p_ble_evt); ble_conn_params_on_ble_evt(p_ble_evt); ble_hids_on_ble_evt(&m_hids, p_ble_evt); ble_bas_on_ble_evt(&m_bas, p_ble_evt); } /**@brief Function for dispatching a system event to interested modules. * * @details This function is called from the System event interrupt handler after a system * event has been received. * * @param[in] sys_evt System stack event. */ static void sys_evt_dispatch(uint32_t sys_evt) { // Dispatch the system event to the fstorage module, where it will be // dispatched to the Flash Data Storage (FDS) module. fs_sys_event_handler(sys_evt); // Dispatch to the Advertising module last, since it will check if there are any // pending flash operations in fstorage. Let fstorage process system events first, // so that it can report correctly to the Advertising module. ble_advertising_on_sys_evt(sys_evt); } /**@brief Function for initializing the BLE stack. * * @details Initializes the SoftDevice and the BLE event interrupt. */ static void ble_stack_init(void) { uint32_t err_code; nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC; // Initialize the SoftDevice handler module. SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true); ble_enable_params_t ble_enable_params; err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT, &ble_enable_params); APP_ERROR_CHECK(err_code); // Check the ram settings against the used number of links CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT); // Enable BLE stack. #if (NRF_SD_BLE_API_VERSION == 3) ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_MAX_MTU_SIZE; #endif err_code = softdevice_enable(&ble_enable_params); APP_ERROR_CHECK(err_code); // Register with the SoftDevice handler module for BLE events. err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch); APP_ERROR_CHECK(err_code); // Register with the SoftDevice handler module for BLE events. err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch); APP_ERROR_CHECK(err_code); } /**@brief Function for the Event Scheduler initialization. */ static void scheduler_init(void) { APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE); } /**@brief Function for handling events from the BSP module. * * @param[in] event Event generated by button press. */ #define MOVEMENT_SPEED 100 #define INPUT_REP_MOVEMENT_INDEX 1 #define INPUT_REP_MOVEMENT_LEN 3 static void mouse_movement_send(int16_t x_delta, int16_t y_delta) { uint32_t err_code; if (m_in_boot_mode) { x_delta = MIN(x_delta, 0x00ff); y_delta = MIN(y_delta, 0x00ff); err_code = ble_hids_boot_mouse_inp_rep_send(&m_hids, 0x00, (int8_t)x_delta, (int8_t)y_delta, 0, NULL); } else { uint8_t buffer[INPUT_REP_MOVEMENT_LEN]; APP_ERROR_CHECK_BOOL(INPUT_REP_MOVEMENT_LEN == 3); x_delta = MIN(x_delta, 0x0fff); y_delta = MIN(y_delta, 0x0fff); buffer[0] = x_delta & 0x00ff; buffer[1] = ((y_delta & 0x000f) << 4) | ((x_delta & 0x0f00) >> 8); buffer[2] = (y_delta & 0x0ff0) >> 4; err_code = ble_hids_inp_rep_send(&m_hids, INPUT_REP_MOVEMENT_INDEX, INPUT_REP_MOVEMENT_LEN, buffer); } if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) ) { APP_ERROR_HANDLER(err_code); } } #if MULTTOUCH_ENABLE static void mouse_moveto_2xy(uint8_t value,uint16_t x_delta,uint16_t y_delta, uint16_t x2_delta,uint16_t y2_delta) { // With this declaration a data packet must be sent as: // byte 1 -> "contact count" (always == 1) // byte 2 -> "contact identifier" (any value) // byte 3 -> "Tip Switch" state (bit 0 = Tip Switch up/down, bit 1 = In Range) // byte 4,5 -> absolute X coordinate (0...10000) // byte 6,7 -> absolute Y coordinate (0...10000) uint8_t buffer[INPUT_REP_TOUCH_LEN]; uint32_t err_code; APP_ERROR_CHECK_BOOL(INPUT_REP_TOUCH_LEN == 13); x_delta = MIN(x_delta, 0x2710); y_delta = MIN(y_delta, 0x2710); buffer[0] = 2; buffer[1] = 1; buffer[2] = value; buffer[3] = x_delta & 0x00ff; buffer[4] = (x_delta>>8)&0x00ff; buffer[5] = y_delta & 0x00ff; buffer[6] = (y_delta>>8)&0x00ff; buffer[7] = 2; buffer[8] = value; buffer[9] = x2_delta & 0x00ff; buffer[10] = (x2_delta>>8)&0x00ff; buffer[11] = y2_delta & 0x00ff; buffer[12] = (y2_delta>>8)&0x00ff; err_code = ble_hids_inp_rep_send(&m_hids, INPUT_REP_TOUCH_INDEX, INPUT_REP_TOUCH_LEN, buffer); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)) { APP_ERROR_HANDLER(err_code); } } static void touch_emulation(bsp_event_t event) { static uint16_t touch_num = 8000; static uint16_t touch_num2 = 2000; switch (event) { case BSP_EVENT_KEY_1: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { mouse_moveto_2xy(1,touch_num,touch_num, touch_num2, touch_num2); touch_num -= 100; if(touch_num < 1000) touch_num = 8000; touch_num2 += 100; if(touch_num2 > 8000) touch_num2 = 1000; } break; case BSP_EVENT_KEY_3: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { mouse_moveto_2xy(1,touch_num2,touch_num2, touch_num,touch_num); touch_num -= 100; if(touch_num < 1000) touch_num = 8000; touch_num2 += 100; if(touch_num2 > 8000) touch_num2 = 1000; } break; default: // mouse_moveto_2xy(0,5000,5000); // touch_num=5000; break; } } #endif static void mouse_movement_send2(int16_t x_delta, int16_t y_delta, int8_t wheel) { uint32_t err_code; if (m_in_boot_mode) { x_delta = MIN(x_delta, 0x00ff); y_delta = MIN(y_delta, 0x00ff); err_code = ble_hids_boot_mouse_inp_rep_send(&m_hids, 0x00, (int8_t)x_delta, (int8_t)y_delta, 0, NULL); } else { uint8_t buffer[INPUT_REP_MOUSE_MAX_LEN] = {0}; APP_ERROR_CHECK_BOOL(INPUT_REP_MOUSE_MAX_LEN == 6); x_delta = MIN(x_delta, 0x0fff); y_delta = MIN(y_delta, 0x0fff); buffer[1] = x_delta & 0x00ff; buffer[2] = ((y_delta & 0x000f) << 4) | ((x_delta & 0x0f00) >> 8); buffer[3] = (y_delta & 0x0ff0) >> 4; buffer[4] = wheel & 0x00ff; buffer[5] = (wheel & 0x0f00) >> 8; err_code = ble_hids_inp_rep_send(&m_hids, INPUT_REP_MOUSE_INDEX, INPUT_REP_MOUSE_MAX_LEN, buffer); } if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)) { APP_ERROR_HANDLER(err_code); } } static void mouse_media_send(uint8_t action) { uint32_t err_code; uint8_t buffer[INPUT_REP_ZOOM_MAX_LEN] = {0}; APP_ERROR_CHECK_BOOL(INPUT_REP_ZOOM_MAX_LEN == 1); buffer[0] = action; err_code = ble_hids_inp_rep_send(&m_hids, 0, INPUT_REP_ZOOM_MAX_LEN, buffer); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_NO_TX_PACKETS) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)) { APP_ERROR_HANDLER(err_code); } else { // Start timer for sending release key app_timer_start(m_hid_button_timer_id, BUTTON_DETECTION_DELAY, NULL); } } static void bsp_event_handler(bsp_event_t event) { uint32_t err_code; static uint8_t *p_key = m_sample_key_press_scan_str; static uint8_t size = 0; static uint8_t cap = 0x39; switch (event) { case BSP_EVENT_SLEEP: sleep_mode_enter(); break; case BSP_EVENT_DISCONNECT: err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } break; case BSP_EVENT_WHITELIST_OFF: if (m_conn_handle == BLE_CONN_HANDLE_INVALID) { err_code = ble_advertising_restart_without_whitelist(); if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } } break; case BSP_EVENT_KEY_0: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { keys_send(1, p_key); p_key++; size++; if (size == 14) { p_key = m_sample_key_press_scan_str; size = 0; } } break; case BSP_EVENT_KEY_1: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { mouse_media_send(MM_KEY_PLAY_PAUSE); } break; case BSP_EVENT_KEY_2: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { mouse_media_send(MM_KEY_VOL_DOWN); } break; case BSP_EVENT_KEY_3: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { mouse_media_send(MM_KEY_VOL_UP); } break; default: break; } } /**@brief Function for the Peer Manager initialization. * * @param[in] erase_bonds Indicates whether bonding information should be cleared from * persistent storage during initialization of the Peer Manager. */ static void peer_manager_init(bool erase_bonds) { ble_gap_sec_params_t sec_param; ret_code_t err_code; err_code = pm_init(); APP_ERROR_CHECK(err_code); if (erase_bonds) { err_code = pm_peers_delete(); APP_ERROR_CHECK(err_code); } memset(&sec_param, 0, sizeof(ble_gap_sec_params_t)); // Security parameters to be used for all security procedures. sec_param.bond = SEC_PARAM_BOND; sec_param.mitm = SEC_PARAM_MITM; sec_param.lesc = SEC_PARAM_LESC; sec_param.keypress = SEC_PARAM_KEYPRESS; sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES; sec_param.oob = SEC_PARAM_OOB; sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE; sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE; sec_param.kdist_own.enc = 1; sec_param.kdist_own.id = 1; sec_param.kdist_peer.enc = 1; sec_param.kdist_peer.id = 1; err_code = pm_sec_params_set(&sec_param); APP_ERROR_CHECK(err_code); err_code = pm_register(pm_evt_handler); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing the Advertising functionality. */ static void advertising_init(void) { uint32_t err_code; uint8_t adv_flags; ble_advdata_t advdata; ble_adv_modes_config_t options; // Build and set advertising data memset(&advdata, 0, sizeof(advdata)); adv_flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE; advdata.name_type = BLE_ADVDATA_FULL_NAME; advdata.include_appearance = true; advdata.flags = adv_flags; advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]); advdata.uuids_complete.p_uuids = m_adv_uuids; memset(&options, 0, sizeof(options)); options.ble_adv_whitelist_enabled = true; options.ble_adv_directed_enabled = true; options.ble_adv_directed_slow_enabled = false; options.ble_adv_directed_slow_interval = 0; options.ble_adv_directed_slow_timeout = 0; options.ble_adv_fast_enabled = true; options.ble_adv_fast_interval = APP_ADV_FAST_INTERVAL; options.ble_adv_fast_timeout = APP_ADV_FAST_TIMEOUT; options.ble_adv_slow_enabled = true; options.ble_adv_slow_interval = APP_ADV_SLOW_INTERVAL; options.ble_adv_slow_timeout = APP_ADV_SLOW_TIMEOUT; err_code = ble_advertising_init(&advdata, NULL, &options, on_adv_evt, ble_advertising_error_handler); APP_ERROR_CHECK(err_code); } /**@brief Function for initializing buttons and leds. * * @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up. */ static void buttons_leds_init(bool * p_erase_bonds) { bsp_event_t startup_event; uint32_t err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER), bsp_event_handler); APP_ERROR_CHECK(err_code); err_code = bsp_btn_ble_init(NULL, &startup_event); APP_ERROR_CHECK(err_code); *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA); } /**@brief Function for the Power manager. */ static void power_manage(void) { uint32_t err_code = sd_app_evt_wait(); APP_ERROR_CHECK(err_code); } /**@brief Function for application main entry. */ int main(void) { bool erase_bonds; uint32_t err_code; // Initialize. err_code = NRF_LOG_INIT(NULL); APP_ERROR_CHECK(err_code); timers_init(); buttons_leds_init(&erase_bonds); ble_stack_init(); scheduler_init(); peer_manager_init(erase_bonds); if (erase_bonds == true) { NRF_LOG_INFO("Bonds erased!\r\n"); } gap_params_init(); advertising_init(); services_init(); sensor_simulator_init(); conn_params_init(); buffer_init(); // Start execution. NRF_LOG_INFO("HID Keyboard Start!\r\n"); timers_start(); advertising_start(); // Enter main loop. for (;;) { app_sched_execute(); if (NRF_LOG_PROCESS() == false) { power_manage(); } } } /** * @} */