SEGGER J-Link Commander V6.16j (Compiled Jul 24 2017 18:54:25)
DLL version V6.16j, compiled Jul 24 2017 18:54:20


Script file read successfully.
Processing script file...

J-Link connection not established yet but required for command.
Connecting to J-Link via USB...O.K.
Firmware: J-Link V10 compiled Sep  1 2017 17:45:26
Hardware version: V10.10
S/N: 260102669
License(s): FlashBP, GDB
OEM: SEGGER-EDU
VTref = 3.341V
Selecting SWD as current target interface.


Selecting 2000 kHz as target interface speed

Device "NRF52832_XXAB" selected.


Connecting to target via SWD
Found SW-DP with ID 0x2BA01477
Found SW-DP with ID 0x2BA01477
Scanning APs, stopping at first AHB-AP found.
AP[0] IDR: 0x24770011 (AHB-AP)
AHB-AP ROM: 0xE00FF000 (Base addr. of first ROM table)
CPUID reg: 0x410FC241. Implementer code: 0x41 (ARM)
Found Cortex-M4 r0p1, Little endian.
FPUnit: 6 code (BP) slots and 2 literal slots
CoreSight components:
ROMTbl[0] @ E00FF000
ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS
ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
ROMTbl[0][4]: E0040000, CID: B105900D, PID: 000BB9A1 TPIU
ROMTbl[0][5]: E0041000, CID: B105900D, PID: 000BB925 ETM
Cortex-M4 identified.

0 bytes in host buffer

Erasing device (nRF52832_xxAB)...
Comparing flash   [100%] Done.
Erasing flash     [100%] Done.
Verifying flash   [100%] Done.
J-Link: Flash download: Total time needed: 0.158s (Prepare: 0.021s, Compare: 0.000s, Erase: 0.133s, Program: 0.000s, Verify: 0.000s, Restore: 0.003s)
Erasing done.

Downloading file [/home/cswanson/s132_nrf52_2.0.0_softdevice.hex]...
Comparing flash   [100%] Done.
Erasing flash     [100%] Done.
Programming flash [100%] Done.
Verifying flash   [100%] Done.
J-Link: Flash download: Bank 0 @ 0x00000000: 1 range affected (114688 bytes)
J-Link: Flash download: Total time needed: 2.064s (Prepare: 0.057s, Compare: 0.008s, Erase: 0.000s, Program: 1.955s, Verify: 0.002s, Restore: 0.041s)
O.K.

Downloading file [/home/cswanson/nrf52832_xxaa.mon37unittest.hex]...
Comparing flash   [100%] Done.
Erasing flash     [100%] Done.
Programming flash [100%] Done.
Verifying flash   [100%] Done.
J-Link: Flash download: Bank 0 @ 0x00000000: 1 range affected (20480 bytes)
J-Link: Flash download: Total time needed: 0.440s (Prepare: 0.045s, Compare: 0.002s, Erase: 0.011s, Program: 0.353s, Verify: 0.000s, Restore: 0.028s)
O.K.

Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.
Reset: Halt core after reset via DEMCR.VC_CORERESET.
Reset: Reset device via AIRCR.SYSRESETREQ.


Script processing completed.