|
dragoon
4383
|
|
dragoon
4383
|
| #define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 |
ATT Error: Application range begin.
Definition at line 122 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_APP_END 0x019F |
ATT Error: Application range end.
Definition at line 123 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A |
ATT Error: Used in ATT as Attribute not found.
Definition at line 112 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B |
ATT Error: Attribute cannot be read or written using read/write blob requests.
Definition at line 113 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD |
ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured.
Definition at line 128 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF |
ATT Common Profile and Service Error: Out Of Range.
Definition at line 130 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE |
ATT Common Profile and Service Error: Procedure Already in Progress.
Definition at line 129 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 |
ATT Error: Authenticated link required.
Definition at line 107 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 |
ATT Error: Used in ATT as Insufficient Authorization.
Definition at line 110 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C |
ATT Error: Encryption key size used is insufficient.
Definition at line 114 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F |
ATT Error: Encrypted link required.
Definition at line 117 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 |
ATT Error: Encrypted link required.
Definition at line 119 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 |
ATT Error: Invalid Error Code.
Definition at line 102 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D |
ATT Error: Invalid value size.
Definition at line 115 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 |
ATT Error: Invalid Attribute Handle.
Definition at line 103 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 |
ATT Error: Offset specified was past the end of the attribute.
Definition at line 109 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 |
ATT Error: Used in ATT as Invalid PDU.
Definition at line 106 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 |
ATT Error: Used in ATT as Prepare Queue Full.
Definition at line 111 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 |
ATT Error: Read not permitted.
Definition at line 104 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 |
ATT Error: Used in ATT as Request Not Supported.
Definition at line 108 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 |
ATT Error: Reserved for Future Use range #1 begin.
Definition at line 120 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F |
ATT Error: Reserved for Future Use range #1 end.
Definition at line 121 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 |
ATT Error: Reserved for Future Use range #2 begin.
Definition at line 124 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF |
ATT Error: Reserved for Future Use range #2 end.
Definition at line 125 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 |
ATT Error: Reserved for Future Use range #3 begin.
Definition at line 126 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC |
ATT Error: Reserved for Future Use range #3 end.
Definition at line 127 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E |
ATT Error: Very unlikely error.
Definition at line 116 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 |
ATT Error: Attribute type is not a supported grouping attribute.
Definition at line 118 of file ble_gatt.h.
| #define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 |
ATT Error: Write not permitted.
Definition at line 105 of file ble_gatt.h.
| #define BLE_GATT_STATUS_SUCCESS 0x0000 |
Success.
Definition at line 100 of file ble_gatt.h.
| #define BLE_GATT_STATUS_UNKNOWN 0x0001 |
Unknown or not applicable status.
Definition at line 101 of file ble_gatt.h.
