Here's the log:

* Executing task: nRF Connect: Flash: core/build (active)

Flashing build to 852006111
C:\WINDOWS\system32\cmd.exe /d /s /c "west flash -d c:\src\warn-zephyr_2\core\build --dev-id 852006111"

-- west flash: rebuilding
[0/10] Performing build step for 'core'
ninja: no work to do.
[1/10] Performing build step for 'mcuboot'
ninja: no work to do.
[3/10] Completed 'core'
[5/10] cmd.exe /C "cd /D C:\src\warn-zephyr_2\core\build\_sysbuild && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"
[6/9] No install step for 'mcuboot'
[7/9] Completed 'mcuboot'
[8/9] cmd.exe /C "cd /D C:\src\warn-zephyr_2\core\build\_sysbuild && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"
-- west flash: using runner nrfutil
-- runners.nrfutil: reset after flashing requested
-- runners.nrfutil: Flashing file: C:\src\warn-zephyr_2\core\build\merged.hex
-- runners.nrfutil: Erasing address ranges touched by firmware
Error: One or more batch tasks failed:
* 852006111: Device error: Memory access error at 0x00000000. Probably a memory protection issue. Probe access is Secure (Generic)

FATAL ERROR: command exited with status 1: nrfutil --json device x-execute-batch --batch-path 'C:\src\warn-zephyr_2\core\build\generated_nrfutil_batch.json' --serial-number 852006111

* The terminal process terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.

* Executing task: nRF Connect: Flash: core/build (active)

Flashing build to 852006111
C:\WINDOWS\system32\cmd.exe /d /s /c "west flash -d c:\src\warn-zephyr_2\core\build --dev-id 852006111"

-- west flash: rebuilding
[0/10] Performing build step for 'core'
ninja: no work to do.
[1/10] Performing build step for 'mcuboot'
ninja: no work to do.
[3/10] Completed 'core'
[5/10] cmd.exe /C "cd /D C:\src\warn-zephyr_2\core\build\_sysbuild && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"
[6/9] No install step for 'mcuboot'
[7/9] Completed 'mcuboot'
[8/9] cmd.exe /C "cd /D C:\src\warn-zephyr_2\core\build\_sysbuild && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"
-- west flash: using runner nrfutil
-- runners.nrfutil: reset after flashing requested
-- runners.nrfutil: Flashing file: C:\src\warn-zephyr_2\core\build\merged.hex
-- runners.nrfutil: Erasing address ranges touched by firmware
-- runners.nrfutil: Programming image
-- runners.nrfutil: Verifying image
-- runners.nrfutil: Reset
-- runners.nrfutil: Board with serial number 852006111 flashed successfully.
* Terminal will be reused by tasks, press any key to close it.

* Executing task: nRF Connect: Flash: core/build (active)

Flashing build to 852006111
C:\WINDOWS\system32\cmd.exe /d /s /c "west flash -d c:\src\warn-zephyr_2\core\build --dev-id 852006111"

-- west flash: rebuilding
[0/10] Performing build step for 'core'
ninja: no work to do.
[1/10] Performing build step for 'mcuboot'
ninja: no work to do.
[3/10] Completed 'core'
[5/10] cmd.exe /C "cd /D C:\src\warn-zephyr_2\core\build\_sysbuild && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"
[6/9] No install step for 'mcuboot'
[7/9] Completed 'mcuboot'
[8/9] cmd.exe /C "cd /D C:\src\warn-zephyr_2\core\build\_sysbuild && C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.exe -E true"
-- west flash: using runner nrfutil
-- runners.nrfutil: reset after flashing requested
-- runners.nrfutil: Flashing file: C:\src\warn-zephyr_2\core\build\merged.hex
-- runners.nrfutil: Erasing address ranges touched by firmware
Error: One or more batch tasks failed:
* 852006111: Device error: Memory access error at 0x00000000. Probably a memory protection issue. Probe access is Secure (Generic)

FATAL ERROR: command exited with status 1: nrfutil --json device x-execute-batch --batch-path 'C:\src\warn-zephyr_2\core\build\generated_nrfutil_batch.json' --serial-number 852006111

* The terminal process terminated with exit code: 1.
* Terminal will be reused by tasks, press any key to close it.