Building openthread west build --build-dir d:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build d:/joiner_dfu_2_6_1/openthread_reset_fix/openthread --pristine --board nrf5340dk_nrf5340_cpuapp -- -DNCS_TOOLCHAIN_VERSION="NONE" -DCONFIG_SIZE_OPTIMIZATIONS=y -DCONF_FILE="prj.conf" -DEXTRA_CONF_FILE="overlay-bt.conf" -DDTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpuapp.overlay -DEXTRA_DTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpuapp.overlay -- west build: generating a build system Loading Zephyr default modules (Zephyr base). -- Application: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread -- CMake version: 3.21.0 -- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf5340dk_nrf5340_cpuapp -- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp.dts -- Found devicetree overlay: boards/nrf5340dk_nrf5340_cpuapp.overlay -- Found devicetree overlay: boards/nrf5340dk_nrf5340_cpuapp.overlay -- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/zephyr.dts -- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/include/generated/devicetree_generated.h -- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/dts.cmake warning: NET_CONFIG_NEED_IPV6 (defined at boards/shields\sparkfun_sara_r4\Kconfig.defconfig:35, boards/shields\wnc_m14a2a\Kconfig.defconfig:28, subsys/net/lib/config/Kconfig:28) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: ((NETWORKING && SHIELD_SPARKFUN_SARA_R4) || (NETWORKING && SHIELD_WNC_M14A2A) || (NET_CONFIG_AUTO_INIT && NETWORKING)) (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_NET_CONFIG_NEED_IPV6 and/or look up NET_CONFIG_NEED_IPV6 in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: BT_CTLR_DATA_LENGTH_MAX (defined at C:/ncs/v2.6.1/nrf\samples\common\mcumgr_bt_ota_dfu/Kconfig:131, C:/ncs/v2.6.1/nrf\subsys\bluetooth\services\fast_pair/Kconfig.fast_pair:101, subsys/bluetooth\controller/Kconfig:490) was assigned the value '151' but got the value ''. Check these unsatisfied dependencies: (NCS_SAMPLE_MCUMGR_BT_OTA_DFU_SPEEDUP || (BT_FAST_PAIR_GATT_SERVICE && BT_FAST_PAIR && BT) || (BT_CTLR_DATA_LENGTH && BT_CONN && BT_CTLR && BT_HCI && BT)) (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_CTLR_DATA_LENGTH_MAX and/or look up BT_CTLR_DATA_LENGTH_MAX in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: OPENTHREAD_COAP (defined at C:/ncs/v2.6.1/zephyr/modules/openthread\Kconfig.features:68, modules\openthread\Kconfig.features:68) was assigned the value 'n' but got the value 'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_OPENTHREAD_COAP and/or look up OPENTHREAD_COAP in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. Parsing D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/Kconfig Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp_defconfig' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/prj.conf' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/overlay-bt.conf' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/misc/generated/extra_kconfig_options.conf' Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/.config' Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/zephyr/include/generated/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe CMake Warning at C:/ncs/v2.6.1/zephyr/subsys/mgmt/mcumgr/grp/fs_mgmt/CMakeLists.txt:26 (message): Note: MCUmgr file system management is enabled but file access hooks are disabled, this is an insecure configuration and not recommended for production use, as all files on the filesystem can be manipulated by a remote device. See https://docs.zephyrproject.org/latest/services/device_mgmt/mcumgr_callbacks.html for details on enabling and using MCUmgr hooks. === child image multiprotocol_rpmsg - CPUNET begin === loading initial cache file D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/child_image_preload.cmake Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.6.1/nrf/samples/nrf5340/multiprotocol_rpmsg -- CMake version: 3.21.0 -- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf5340dk_nrf5340_cpunet -- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet.dts -- Found devicetree overlay: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/multiprotocol_rpmsg/boards/nrf5340dk_nrf5340_cpunet.overlay -- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr.dts -- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/include/generated/devicetree_generated.h -- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/dts.cmake warning: BT_OBSERVER (defined at C:/ncs/v2.6.1/nrf\subsys\bluetooth\rpc/Kconfig:151, subsys/bluetooth/Kconfig:101) was assigned the value 'n' but got the value 'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_OBSERVER and/or look up BT_OBSERVER in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: BT_BROADCASTER (defined at C:/ncs/v2.6.1/nrf\subsys\bluetooth\rpc/Kconfig:159, subsys/bluetooth/Kconfig:95) was assigned the value 'n' but got the value 'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_BROADCASTER and/or look up BT_BROADCASTER in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: PRINTK (defined at subsys/debug/Kconfig:204) was assigned the value 'n' but got the value 'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_PRINTK and/or look up PRINTK in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. Parsing C:/ncs/v2.6.1/zephyr/Kconfig Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet_defconfig' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/multiprotocol_rpmsg/prj.conf' Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/bootloader/image/secure_boot.conf' Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/partition_manager_enabled.conf' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/multiprotocol_rpmsg.conf' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/misc/generated/extra_kconfig_options.conf' Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/.config' Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/include/generated/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe === child image b0n - CPUNET (inherited) begin === loading initial cache file D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/child_image_preload.cmake Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.6.1/nrf/samples/nrf5340/netboot -- CMake version: 3.21.0 -- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf5340dk_nrf5340_cpunet -- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet.dts -- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/zephyr.dts -- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/include/generated/devicetree_generated.h -- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/dts.cmake Parsing C:/ncs/v2.6.1/nrf/samples/nrf5340/netboot/Kconfig Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet_defconfig' Merged configuration 'C:/ncs/v2.6.1/nrf/samples/nrf5340/netboot/prj.conf' Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/partition_manager_enabled.conf' Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/.config' Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n/zephyr/include/generated/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe CMake Warning at C:/ncs/v2.6.1/zephyr/CMakeLists.txt:1957 (message): __ASSERT() statements are globally ENABLED -- Configuring done -- Generating done -- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/b0n === child image b0n - CPUNET (inherited) end === CMake Warning at C:/ncs/v2.6.1/nrf/subsys/bootloader/cmake/debug_keys.cmake:36 (message): -------------------------------------------------------------- --- WARNING: Using generated NSIB public/private key-pair. --- --- It should not be used for production. --- --- See CONFIG_SB_SIGNING_KEY_FILE --- -------------------------------------------------------------- Call Stack (most recent call first): C:/ncs/v2.6.1/nrf/subsys/bootloader/cmake/provision_hex.cmake:47 (include) C:/ncs/v2.6.1/nrf/subsys/CMakeLists.txt:20 (include) -- libmetal version: 1.4.0 (C:/ncs/v2.6.1/nrf/samples/nrf5340/multiprotocol_rpmsg) -- Build type: -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- Looking for include file stdatomic.h -- Looking for include file stdatomic.h - found -- open-amp version: 1.4.0 (C:/ncs/v2.6.1/modules/lib/open-amp/open-amp) -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- C_FLAGS : -Wall -Wextra -- Looking for include file fcntl.h -- Looking for include file fcntl.h - found CMake Warning at C:/ncs/v2.6.1/zephyr/CMakeLists.txt:1957 (message): __ASSERT() statements are globally ENABLED CMake Warning at C:/ncs/v2.6.1/nrf/cmake/partition_manager.cmake:79 (message): --------------------------------------------------------------------- --- WARNING: Using a bootloader without pm_static.yml. --- --- There are cases where a deployed product can consist of --- --- multiple images, and only a subset of these images can be --- --- upgraded through a firmware update mechanism. In such cases, --- --- the upgradable images must have partitions that are static --- --- and are matching the partition map used by the bootloader --- --- programmed onto the device. --- --------------------------------------------------------------------- Call Stack (most recent call first): C:/ncs/v2.6.1/zephyr/cmake/modules/kernel.cmake:248 (include) C:/ncs/v2.6.1/zephyr/cmake/modules/zephyr_default.cmake:138 (include) C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include) C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) CMakeLists.txt:5 (find_package) -- Configuring done -- Generating done -- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg === child image multiprotocol_rpmsg - CPUNET end === -- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found version "3.9.13") found components: Interpreter === child image mcuboot - begin === loading initial cache file D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/child_image_preload.cmake Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.6.1/bootloader/mcuboot/boot/zephyr -- CMake version: 3.21.0 -- Found Python3: C:/ncs/toolchains/cf2149caf2/opt/bin/python.exe (found suitable version "3.9.13", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.6.1/zephyr/.cache -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf5340dk_nrf5340_cpuapp -- Found host-tools: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found toolchain: zephyr 0.16.5 (C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/cf2149caf2/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp.dts -- Found devicetree overlay: C:/ncs/v2.6.1/nrf/modules/mcuboot/flash_sim.overlay -- Found devicetree overlay: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/mcuboot/boards/nrf5340dk_nrf5340_cpuapp.overlay -- Generated zephyr.dts: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/zephyr.dts -- Generated devicetree_generated.h: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/include/generated/devicetree_generated.h -- Including generated dts.cmake file: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/dts.cmake warning: MBEDTLS_ECP_C (defined at C:/ncs/v2.6.1/nrf\modules/trusted- firmware-m/Kconfig.mbedtls_minimal.defconfig:41, C:/ncs/v2.6.1/nrf\subsys\nrf_security\Kconfig.legacy:521, C:/ncs/v2.6.1/zephyr/modules/mbedtls\Kconfig.tls-generic:145, modules\mbedtls\Kconfig.tls- generic:145) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: (TFM_PROFILE_TYPE_MINIMAL || (MBEDTLS_LEGACY_CRYPTO_C && NRF_SECURITY) || (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS) || (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls- generic.h" && MBEDTLS && 0)) (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MBEDTLS_ECP_C and/or look up MBEDTLS_ECP_C in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: MBEDTLS_ECDSA_C (defined at C:/ncs/v2.6.1/nrf\subsys\nrf_security\Kconfig.legacy:542, C:/ncs/v2.6.1/zephyr/modules/mbedtls\Kconfig.tls-generic:137, modules\mbedtls\Kconfig.tls- generic:137) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: ((MBEDTLS_ECP_C && MBEDTLS_LEGACY_CRYPTO_C && NRF_SECURITY) || (MBEDTLS_ECP_C && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS) || (MBEDTLS_ECP_C && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS && 0)) (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MBEDTLS_ECDSA_C and/or look up MBEDTLS_ECDSA_C in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: MBEDTLS_SHA256_C (defined at C:/ncs/v2.6.1/nrf\subsys\nrf_security\Kconfig.legacy:718) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: MBEDTLS_LEGACY_CRYPTO_C (=n), NRF_SECURITY (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MBEDTLS_SHA256_C and/or look up MBEDTLS_SHA256_C in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: UART_CONSOLE (defined at drivers/console/Kconfig:43) was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies: CONSOLE (=n). See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_CONSOLE and/or look up UART_CONSOLE in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. warning: PRINTK (defined at subsys/debug/Kconfig:204) was assigned the value 'n' but got the value 'y'. See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_PRINTK and/or look up PRINTK in the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too. Parsing C:/ncs/v2.6.1/bootloader/mcuboot/boot/zephyr/Kconfig Loaded configuration 'C:/ncs/v2.6.1/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpuapp_defconfig' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/mcuboot/prj.conf' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/child_image/mcuboot/boards/nrf5340dk_nrf5340_cpuapp.conf' Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/pcd/pcd.conf' Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/ext_flash_mcuboot_secondary.conf' Merged configuration 'C:/ncs/v2.6.1/nrf/subsys/partition_manager/partition_manager_enabled.conf' Merged configuration 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/misc/generated/extra_kconfig_options.conf' Configuration saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/.config' Kconfig header saved to 'D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot/zephyr/include/generated/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0 -- The CXX compiler identification is GNU 12.2.0 -- The ASM compiler identification is GNU -- Found assembler: C:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe MCUBoot bootloader key file: C:/ncs/v2.6.1/bootloader/mcuboot/root-ec-p256.pem -- Configuring done -- Generating done -- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/mcuboot === child image mcuboot - end === CMake Warning at C:/ncs/v2.6.1/nrf/modules/mcuboot/CMakeLists.txt:382 (message): --------------------------------------------------------- --- WARNING: Using default MCUBoot key, it should not --- --- be used for production. --- --------------------------------------------------------- -- OpenThread Source Directory: C:/ncs/v2.6.1/modules/lib/openthread -- OT_APP_CLI=ON -- OT_APP_NCP=ON -- OT_APP_RCP=ON -- OT_FTD=OFF -- OT_MTD=ON -- OT_RCP=ON -- - - - - - - - - - - - - - - - - -- OpenThread ON/OFF/Unspecified Configs -- OT_15_4=ON --> OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE=1 -- OT_ANDROID_NDK="" -- OT_ANYCAST_LOCATOR=OFF --> OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE=0 -- OT_ASSERT=OFF --> OPENTHREAD_CONFIG_ASSERT_ENABLE=0 -- OT_BACKBONE_ROUTER=OFF --> OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE=0 -- OT_BACKBONE_ROUTER_DUA_NDPROXYING=OFF --> OPENTHREAD_CONFIG_BACKBONE_ROUTER_DUA_NDPROXYING_ENABLE=0 -- OT_BACKBONE_ROUTER_MULTICAST_ROUTING=OFF --> OPENTHREAD_CONFIG_BACKBONE_ROUTER_MULTICAST_ROUTING_ENABLE=0 -- OT_BLE_TCAT=OFF --> OPENTHREAD_CONFIG_BLE_TCAT_ENABLE=0 -- OT_BORDER_AGENT=OFF --> OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE=0 -- OT_BORDER_AGENT_ID="" -- OT_BORDER_ROUTER=OFF --> OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE=0 -- OT_BORDER_ROUTING=OFF --> OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE=0 -- OT_BORDER_ROUTING_DHCP6_PD=OFF --> OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE=0 -- OT_BORDER_ROUTING_COUNTERS=OFF --> OPENTHREAD_CONFIG_IP6_BR_COUNTERS_ENABLE=0 -- OT_CHANNEL_MANAGER=OFF --> OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE=0 -- OT_CHANNEL_MONITOR=OFF --> OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE=0 -- OT_COAP=ON --> OPENTHREAD_CONFIG_COAP_API_ENABLE=1 -- OT_COAP_BLOCK=OFF --> OPENTHREAD_CONFIG_COAP_BLOCKWISE_TRANSFER_ENABLE=0 -- OT_COAP_OBSERVE=OFF --> OPENTHREAD_CONFIG_COAP_OBSERVE_API_ENABLE=0 -- OT_COAPS=ON --> OPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE=1 -- OT_COMMISSIONER=ON --> OPENTHREAD_CONFIG_COMMISSIONER_ENABLE=1 -- OT_CSL_AUTO_SYNC=ON --> OPENTHREAD_CONFIG_MAC_CSL_AUTO_SYNC_ENABLE=1 -- OT_CSL_DEBUG=OFF --> OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE=0 -- OT_CSL_RECEIVER=ON --> OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE=1 -- OT_CSL_RECEIVER_LOCAL_TIME_SYNC=OFF --> OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_LOCAL_TIME_SYNC=0 -- OT_DATASET_UPDATER=OFF --> OPENTHREAD_CONFIG_DATASET_UPDATER_ENABLE=0 -- OT_DEVICE_PROP_LEADER_WEIGHT=OFF --> OPENTHREAD_CONFIG_MLE_DEVICE_PROPERTY_LEADER_WEIGHT_ENABLE=0 -- OT_DHCP6_CLIENT=ON --> OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE=1 -- OT_DHCP6_SERVER=ON --> OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE=1 -- OT_DIAGNOSTIC=ON --> OPENTHREAD_CONFIG_DIAG_ENABLE=1 -- OT_DNS_CLIENT=ON --> OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE=1 -- OT_DNS_CLIENT_OVER_TCP=OFF --> OPENTHREAD_CONFIG_DNS_CLIENT_OVER_TCP_ENABLE=0 -- OT_DNS_DSO=OFF --> OPENTHREAD_CONFIG_DNS_DSO_ENABLE=0 -- OT_DNS_UPSTREAM_QUERY=OFF --> OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE=0 -- OT_DNSSD_SERVER=OFF --> OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE=0 -- OT_DUA=ON --> OPENTHREAD_CONFIG_DUA_ENABLE=1 -- OT_ECDSA=ON --> OPENTHREAD_CONFIG_ECDSA_ENABLE=1 -- OT_EXTERNAL_HEAP=ON --> OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE=1 -- OT_FIREWALL=OFF --> OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE=0 -- OT_HISTORY_TRACKER=OFF --> OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE=0 -- OT_IP6_FRAGM=ON --> OPENTHREAD_CONFIG_IP6_FRAGMENTATION_ENABLE=1 -- OT_JAM_DETECTION=ON --> OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1 -- OT_JOINER=ON --> OPENTHREAD_CONFIG_JOINER_ENABLE=1 -- OT_LINK_METRICS_INITIATOR=ON --> OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE=1 -- OT_LINK_METRICS_MANAGER=OFF --> OPENTHREAD_CONFIG_LINK_METRICS_MANAGER_ENABLE=0 -- OT_LINK_METRICS_SUBJECT=ON --> OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE=1 -- OT_LINK_RAW=ON --> OPENTHREAD_CONFIG_LINK_RAW_ENABLE=1 -- OT_LOG_LEVEL_DYNAMIC=OFF --> OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE=0 -- OT_MAC_FILTER=ON --> OPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1 -- OT_MESH_DIAG=OFF --> OPENTHREAD_CONFIG_MESH_DIAG_ENABLE=0 -- OT_MESSAGE_USE_HEAP=OFF --> OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE=0 -- OT_MLE_LONG_ROUTES=OFF --> OPENTHREAD_CONFIG_MLE_LONG_ROUTES_ENABLE=0 -- OT_MLR=ON --> OPENTHREAD_CONFIG_MLR_ENABLE=1 -- OT_MULTIPAN_RCP=OFF --> OPENTHREAD_CONFIG_MULTIPAN_RCP_ENABLE=0 -- OT_MULTIPLE_INSTANCE=OFF --> OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE=0 -- OT_NAT64_BORDER_ROUTING=OFF --> OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE=0 -- OT_NAT64_TRANSLATOR=OFF --> OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE=0 -- OT_NEIGHBOR_DISCOVERY_AGENT=OFF --> OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE=0 -- OT_NETDATA_PUBLISHER=OFF --> OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE=0 -- OT_NETDIAG_CLIENT=ON --> OPENTHREAD_CONFIG_TMF_NETDIAG_CLIENT_ENABLE=1 -- OT_OPERATIONAL_DATASET_AUTO_INIT=ON --> OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT=1 -- OT_OTNS=OFF --> OPENTHREAD_CONFIG_OTNS_ENABLE=0 -- OT_PING_SENDER=ON --> OPENTHREAD_CONFIG_PING_SENDER_ENABLE=1 -- OT_PLATFORM_BOOTLOADER_MODE=OFF --> OPENTHREAD_CONFIG_PLATFORM_BOOTLOADER_MODE_ENABLE=0 -- OT_PLATFORM_KEY_REF=ON --> OPENTHREAD_CONFIG_PLATFORM_KEY_REFERENCES_ENABLE=1 -- OT_PLATFORM_NETIF=OFF --> OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE=0 -- OT_PLATFORM_POWER_CALIBRATION=OFF --> OPENTHREAD_CONFIG_PLATFORM_POWER_CALIBRATION_ENABLE=0 -- OT_PLATFORM_UDP=OFF --> OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE=0 -- OT_REFERENCE_DEVICE=OFF --> OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE=0 -- OT_SERVICE=ON --> OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1 -- OT_SETTINGS_RAM=OFF --> OPENTHREAD_SETTINGS_RAM=0 -- OT_SLAAC=ON --> OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1 -- OT_SNTP_CLIENT=ON --> OPENTHREAD_CONFIG_SNTP_CLIENT_ENABLE=1 -- OT_SRP_ADV_PROXY="" -- OT_SRP_CLIENT=ON --> OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE=1 -- OT_SRP_SERVER=OFF --> OPENTHREAD_CONFIG_SRP_SERVER_ENABLE=0 -- OT_TCP=OFF --> OPENTHREAD_CONFIG_TCP_ENABLE=0 -- OT_TIME_SYNC=OFF --> OPENTHREAD_CONFIG_TIME_SYNC_ENABLE=0 -- OT_TREL=OFF --> OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE=0 -- OT_TX_BEACON_PAYLOAD=OFF --> OPENTHREAD_CONFIG_MAC_OUTGOING_BEACON_PAYLOAD_ENABLE=0 -- OT_TX_QUEUE_STATS=OFF --> OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE=0 -- OT_UDP_FORWARD=ON --> OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE=1 -- OT_UPTIME=OFF --> OPENTHREAD_CONFIG_UPTIME_ENABLE=0 -- - - - - - - - - - - - - - - - - -- OT_PLATFORM="zephyr" -- OT_THREAD_VERSION="1.2" -> OPENTHREAD_CONFIG_THREAD_VERSION=OT_THREAD_VERSION_1_2 -- OT_LOG_LEVEL="" -- OT_LOG_OUTPUT="" -- OT_VENDOR_NAME="" -- OT_VENDOR_MODEL="" -- OT_VENDOR_SW_VERSION="" -- OT_POWER_SUPPLY="EXTERNAL" --> OPENTHREAD_CONFIG_DEVICE_POWER_SUPPLY=OT_POWER_SUPPLY_EXTERNAL -- OT_MLE_MAX_CHILDREN="" -- OT_RCP_RESTORATION_MAX_COUNT="" -- OT_RCP_TX_WAIT_TIME_SECS="" -- Package Name: OPENTHREAD -- Setting default package version: b9dcdbca4 -- Package Version: b9dcdbca4 -- libmetal version: 1.4.0 (D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread) -- Build type: -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- Looking for include file stdatomic.h -- Looking for include file stdatomic.h - found -- open-amp version: 1.4.0 (C:/ncs/v2.6.1/modules/lib/open-amp/open-amp) -- Host: Windows/AMD64 -- Target: Generic/arm -- Machine: arm -- C_FLAGS : -Wall -Wextra -- Looking for include file fcntl.h -- Looking for include file fcntl.h - found CMake Warning at C:/ncs/v2.6.1/zephyr/CMakeLists.txt:862 (message): No SOURCES given to Zephyr library: drivers__rtc Excluding target from build. -- Found partition manager static configuration: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/pm_static.yml Partition 'mcuboot' is not included in the dynamic resolving since it is statically defined. Dropping partition 'hw_unique_key_partition' since its size is 0. CMake Warning at C:/ncs/v2.6.1/nrf/cmake/partition_manager.cmake:601 (message): Could not find memory mapped address for XIP. Generated update hex files will not have the correct base address. Hence they can not be programmed directly to the external flash Call Stack (most recent call first): C:/ncs/v2.6.1/zephyr/cmake/modules/kernel.cmake:248 (include) C:/ncs/v2.6.1/zephyr/cmake/modules/zephyr_default.cmake:138 (include) C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include) C:/ncs/v2.6.1/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) CMakeLists.txt:17 (find_package) -- Configuring done -- Generating done -- Build files have been written to: D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build ←[92m-- west build: building application [2/809] Generating include/generated/version.h -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr), build: v3.5.99-ncs1-1 [11/809] Performing build step for 'multiprotocol_rpmsg_subimage' [0/287] Generating signing key [2/287] Creating public key from private key used for signing [3/287] Generating include/generated/version.h -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr), build: v3.5.99-ncs1-1 [6/287] Creating data to be provisioned to the Bootloader, storing to provision.hex [15/287] Performing build step for 'b0n_subimage' [2/137] Generating include/generated/version.h -- Zephyr version: 3.5.99 (C:/ncs/v2.6.1/zephyr), build: v3.5.99-ncs1-1 [102/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/mdk/system_nrf534[104/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/drivers/src/nrfx_[106/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/drivers/src/nrfx_[109/137] Building C object modules/hal_nordic/nrfx/CMakeFiles/modules__hal_nordic__nrfx.dir/C_/ncs/v2.6.1/modules/hal/nordic/nrfx/drivers/src/nrfx_[137/137] Linking C executable zephyr\zephyr.elf Memory region Used Size Region Size %age Used FLASH: 23710 B 34176 B 69.38% RAM: 3528 B 64 KB 5.38% SRAM1: 0 GB 64 KB 0.00% IDT_LIST: 0 GB 32 KB 0.00% [31/287] Building C object zephyr/drivers/ipm/CMakeFiles/drivers__ipm.dir/ipm_nrfx_ipc.c.obj C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:247:13: warning: 'gipm_send' defined but not used [-Wunused-function] 247 | static void gipm_send(uint32_t id) | ^~~~~~~~~ C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:147:12: warning: 'vipm_nrf_init' defined but not used [-Wunused-function] 147 | static int vipm_nrf_init(const struct device *dev) | ^~~~~~~~~~~~~ C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:140:17: warning: 'vipm_nrf_max_id_val_get' defined but not used [-Wunused-function] 140 | static uint32_t vipm_nrf_max_id_val_get(const struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~ C:/ncs/v2.6.1/zephyr/drivers/ipm/ipm_nrfx_ipc.c:135:12: warning: 'vipm_nrf_max_data_size_get' defined but not used [-Wunused-function] 135 | static int vipm_nrf_max_data_size_get(const struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ [57/287] Building C object zephyr/CMakeFiles/zephyr.dir/subsys/ipc/rpmsg_service/rpmsg_backend.c.obj C:/ncs/v2.6.1/zephyr/subsys/ipc/rpmsg_service/rpmsg_backend.c:158:13: warning: 'ipm_callback' defined but not used [-Wunused-function] 158 | static void ipm_callback(const struct device *dev, | ^~~~~~~~~~~~ [216/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_frame_parser.c[222/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_security_write[223/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_ie_writer.c.ob[225/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/ack_generator/nrf_802154_[226/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_precise_ack_ti[230/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_ie_writer.c.ob[232/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/driver/CMakeFiles/nrf-802154-driver.dir/src/mac_features/nrf_802154_precise_ack_ti[233/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/serialization/CMakeFiles/nrf-802154-serialization.dir/src/nrf_802154_buffer_alloca[236/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/serialization/CMakeFiles/nrf-802154-serialization.dir/src/nrf_802154_buffer_mgr_ds[241/287] Building C object modules/nrfxlib/nrf_802154/nrf_802154/serialization/CMakeFiles/nrf-802154-serialization.dir/src/nrf_802154_buffer_mgr_ds[278/287] Linking C executable zephyr\zephyr_pre0.elf FAILED: zephyr/zephyr_pre0.elf zephyr/zephyr_pre0.map D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr_pre0.map cmd.exe /C "cd . && C:\ncs\toolchains\cf2149caf2\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -gdwarf-4 @CMakeFiles\zephyr_pre0.rsp -o zephyr\zephyr_pre0.elf && cmd.exe /C "cd /D D:\jo iner_dfu_2_6_1\openthread_reset_fix\openthread\build\multiprotocol_rpmsg\zephyr && C:\ncs\toolchains\cf2149caf2\opt\bin\cmake.exe -E true"" c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe: zephyr\zephyr_pre0.elf section `rodata' will not fit in re gion `FLASH' c:/ncs/toolchains/cf2149caf2/opt/zephyr-sdk/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd.exe: region `FLASH' overflowed by 3436 bytes collect2.exe: error: ld returned 1 exit status ninja: build stopped: subcommand failed. [133/809] modules\openthread\build\CMakeFiles\print-ot-config-96e6445.bat 32adaf8e65370a5c OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE=1 OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE=0 OPENTHREAD_CONFIG_ASSERT_ENABLE=0 OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE=0 OPENTHREAD_CONFIG_BACKBONE_ROUTER_DUA_NDPROXYING_ENABLE=0 OPENTHREAD_CONFIG_BACKBONE_ROUTER_MULTICAST_ROUTING_ENABLE=0 OPENTHREAD_CONFIG_BLE_TCAT_ENABLE=0 OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE=0 OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE=0 OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE=0 OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE=0 OPENTHREAD_CONFIG_IP6_BR_COUNTERS_ENABLE=0 OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE=0 OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE=0 OPENTHREAD_CONFIG_COAP_API_ENABLE=1 OPENTHREAD_CONFIG_COAP_BLOCKWISE_TRANSFER_ENABLE=0 OPENTHREAD_CONFIG_COAP_OBSERVE_API_ENABLE=0 OPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE=1 OPENTHREAD_CONFIG_COMMISSIONER_ENABLE=1 OPENTHREAD_CONFIG_MAC_CSL_AUTO_SYNC_ENABLE=1 OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE=0 OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE=1 OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_LOCAL_TIME_SYNC=0 OPENTHREAD_CONFIG_DATASET_UPDATER_ENABLE=0 OPENTHREAD_CONFIG_MLE_DEVICE_PROPERTY_LEADER_WEIGHT_ENABLE=0 OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE=1 OPENTHREAD_CONFIG_DIAG_ENABLE=1 OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_DNS_CLIENT_OVER_TCP_ENABLE=0 OPENTHREAD_CONFIG_DNS_DSO_ENABLE=0 OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE=0 OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE=0 OPENTHREAD_CONFIG_DUA_ENABLE=1 OPENTHREAD_CONFIG_ECDSA_ENABLE=1 OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE=1 OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE=0 OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE=0 OPENTHREAD_CONFIG_IP6_FRAGMENTATION_ENABLE=1 OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE=1 OPENTHREAD_CONFIG_JOINER_ENABLE=1 OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE=1 OPENTHREAD_CONFIG_LINK_METRICS_MANAGER_ENABLE=0 OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE=1 OPENTHREAD_CONFIG_LINK_RAW_ENABLE=1 OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE=0 OPENTHREAD_CONFIG_MAC_FILTER_ENABLE=1 OPENTHREAD_CONFIG_MESH_DIAG_ENABLE=0 OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE=0 OPENTHREAD_CONFIG_MLE_LONG_ROUTES_ENABLE=0 OPENTHREAD_CONFIG_MLR_ENABLE=1 OPENTHREAD_CONFIG_MULTIPAN_RCP_ENABLE=0 OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE=0 OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE=0 OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE=0 OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE=0 OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE=0 OPENTHREAD_CONFIG_TMF_NETDIAG_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT=1 OPENTHREAD_CONFIG_OTNS_ENABLE=0 OPENTHREAD_CONFIG_PING_SENDER_ENABLE=1 OPENTHREAD_CONFIG_PLATFORM_BOOTLOADER_MODE_ENABLE=0 OPENTHREAD_CONFIG_PLATFORM_KEY_REFERENCES_ENABLE=1 OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE=0 OPENTHREAD_CONFIG_PLATFORM_POWER_CALIBRATION_ENABLE=0 OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE=0 OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE=0 OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE=1 OPENTHREAD_SETTINGS_RAM=0 OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1 OPENTHREAD_CONFIG_SNTP_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE=1 OPENTHREAD_CONFIG_SRP_SERVER_ENABLE=0 OPENTHREAD_CONFIG_TCP_ENABLE=0 OPENTHREAD_CONFIG_TIME_SYNC_ENABLE=0 OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE=0 OPENTHREAD_CONFIG_MAC_OUTGOING_BEACON_PAYLOAD_ENABLE=0 OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE=0 OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE=1 OPENTHREAD_CONFIG_UPTIME_ENABLE=0 OPENTHREAD_CONFIG_THREAD_VERSION=OT_THREAD_VERSION_1_2 OPENTHREAD_CONFIG_DEVICE_POWER_SUPPLY=OT_POWER_SUPPLY_EXTERNAL OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS=0 OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT=0 PACKAGE_NAME=OPENTHREAD OPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1 KERNEL __ZEPHYR__=1 _FORTIFY_SOURCE=1 _ANSI_SOURCE __LINUX_ERRNO_EXTENSIONS__ USE_PARTITION_MANAGER=1 __PROGRAM_START NRF5340_XXAA_APPLICATION NRF5340_XXAA_APPLICATION NRF_SKIP_FICR_NS_COPY_TO_RAM MBEDTLS_CONFIG_FILE=nrf-config.h MBEDTLS_PSA_CRYPTO_CONFIG_FILE=nrf-psa-crypto-want-config.h MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE=nrf-psa-crypto-config.h NRF_802154_SERIALIZATION_HOST=1 NRF_802154_USE_RAW_API=1 NRF_802154_PENDING_SHORT_ADDRESSES=16 NRF_802154_PENDING_EXTENDED_ADDRESSES=16 NRF_802154_RX_BUFFERS=16 NRF_802154_TX_STARTED_NOTIFY_ENABLED=1 NRF_802154_ACK_TIMEOUT_ENABLED=1 NRF_802154_CCA_CORR_LIMIT_DEFAULT=2 NRF_802154_CCA_CORR_THRESHOLD_DEFAULT=45 NRF_802154_CCA_ED_THRESHOLD_DEFAULT=45 NRF_802154_SECURITY_KEY_STORAGE_SIZE=3 NRF_802154_CCA_MODE_DEFAULT=NRF_RADIO_CCA_MODE_ED NRF_802154_ENCRYPTION_ENABLED=1 NRF_802154_SECURITY_WRITER_ENABLED=1 NRF_802154_IE_WRITER_ENABLED=1 NRF_802154_INTERNAL_RADIO_IRQ_HANDLING=0 NRF_802154_CARRIER_FUNCTIONS_ENABLED=0 NRF_802154_ENERGY_DETECTED_VERSION=1 NRF_802154_PLATFORM_ASSERT_INCLUDE=nrf_802154_assert_zephyr.h NRF_802154_ECB_PRIORITY=-1 NRF_802154_SWI_PRIORITY=1 [235/809] Building CXX object modules/openthread/build/src/core/CMakeFiles/openthread-mtd.dir/meshcop/dataset.cpp.obj FAILED: modules/nrf/samples/multiprotocol_rpmsg_subimage-prefix/src/multiprotocol_rpmsg_subimage-stamp/multiprotocol_rpmsg_subimage-build multiprotocol_rpmsg/zephyr/zephyr.hex multiprotocol_rpmsg/zeph yr/zephyr.elf multiprotocol_rpmsg/zephyr/merged_CPUNET.hex D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/modules/nrf/samples/multiprotocol_rpmsg_subimage-prefix/src/mul tiprotocol_rpmsg_subimage-stamp/multiprotocol_rpmsg_subimage-build D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr.hex D:/joiner_dfu_2_6 _1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zephyr/zephyr.elf D:/joiner_dfu_2_6_1/openthread_reset_fix/openthread/build/multiprotocol_rpmsg/zep hyr/merged_CPUNET.hex cmd.exe /C "cd /D D:\joiner_dfu_2_6_1\openthread_reset_fix\openthread\build\multiprotocol_rpmsg && C:\ncs\toolchains\cf2149caf2\opt\bin\cmake.exe --build . --" [241/809] Building CXX object modules/openthread/build/src/core/CMakeFiles/openthread-mtd.dir/meshcop/dataset.cpp.obj ninja: build stopped: subcommand failed. FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\cf2149caf2\opt\bin\cmake.EXE' --build 'd:\joiner_dfu_2_6_1\openthread_reset_fix\openthread\build' * The terminal process terminated with exit code: 1. * Terminal will be reused by tasks, press any key to close it.