/**
 * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
/**
 * @brief BLE LED Button Service central and client application main file.
 *
 * This example can be a central for up to 8 peripherals.
 * The peripheral is called ble_app_blinky and can be found in the ble_peripheral
 * folder.
 */

#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include "nordic_common.h"
#include "nrf_sdh.h"
#include "nrf_sdh_ble.h"
#include "app_timer.h"
#include "bsp_btn_ble.h"
#include "ble.h"
#include "ble_hci.h"
#include "ble_advertising.h"
#include "ble_conn_params.h"
#include "ble_db_discovery.h"
#include "ble_conn_state.h"
#include "nrf_ble_gatt.h"
#include "nrf_pwr_mgmt.h"
#include "nrf_ble_scan.h"

#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"

#include "peer_manager.h"
#include "peer_manager_handler.h"
#include "fds.h"
#include "nrf_fstorage.h"
#include "ble_bps_c.h"
#include "ble_bas_c.h"




#define APP_BLE_CONN_CFG_TAG      1                                     /**< Tag that refers to the BLE stack configuration that is set with @ref sd_ble_cfg_set. The default tag is @ref APP_BLE_CONN_CFG_TAG. */
#define APP_BLE_OBSERVER_PRIO     3                                     /**< BLE observer priority of the application. There is no need to modify this value. */

#define CENTRAL_SCANNING_LED      BSP_BOARD_LED_0
#define CENTRAL_CONNECTED_LED     BSP_BOARD_LED_1
#define LEDBUTTON_LED             BSP_BOARD_LED_2                       /**< LED to indicate a change of state of the Button characteristic on the peer. */

#define LEDBUTTON_BUTTON          BSP_BUTTON_0                          /**< Button that writes to the LED characteristic of the peer. */
#define BUTTON_DETECTION_DELAY    APP_TIMER_TICKS(50)                   /**< Delay from a GPIOTE event until a button is reported as pushed (in number of timer ticks). */

#define SEC_PARAM_BOND              1                                   /**< Perform bonding. */
#define SEC_PARAM_MITM              0                                   /**< Man In The Middle protection not required. */
#define SEC_PARAM_LESC              1                                   /**< LE Secure Connections enabled. */
#define SEC_PARAM_KEYPRESS          0                                   /**< Keypress notifications not enabled. */
#define SEC_PARAM_IO_CAPABILITIES   BLE_GAP_IO_CAPS_NONE                /**< No I/O capabilities. */
#define SEC_PARAM_OOB               0                                   /**< Out Of Band data not available. */
#define SEC_PARAM_MIN_KEY_SIZE      7                                   /**< Minimum encryption key size in octets. */
#define SEC_PARAM_MAX_KEY_SIZE      16                                  /**< Maximum encryption key size in octets. */

BLE_BPS_C_DEF(m_bps_c);
BLE_BAS_C_DEF(m_bas_c);  
NRF_BLE_GATT_DEF(m_gatt);                                               /**< GATT module instance. */
BLE_DB_DISCOVERY_DEF(m_db_disc);                                        /**< Database discovery module instance. */
NRF_BLE_SCAN_DEF(m_scan);                                               /**< Scanning Module instance. */
NRF_BLE_GQ_DEF(m_ble_gatt_queue,                                        /**< BLE GATT Queue instance. */
               NRF_SDH_BLE_CENTRAL_LINK_COUNT,
               NRF_BLE_GQ_QUEUE_SIZE);

static char const m_target_periph_name[] = "A&D_";             /**< Name of the device to try to connect to. This name is searched for in the scanning report data. */

/**@brief BPS UUID. */
static ble_uuid_t const m_bps_uuid =
{
    .uuid = BLE_UUID_BLOOD_PRESSURE_SERVICE,
    .type = BLE_UUID_TYPE_BLE
};


/**@brief Function for handling asserts in the SoftDevice.
 *
 * @details This function is called in case of an assert in the SoftDevice.
 *
 * @warning This handler is only an example and is not meant for the final product. You need to analyze
 *          how your product is supposed to react in case of an assert.
 * @warning On assert from the SoftDevice, the system can only recover on reset.
 *
 * @param[in] line_num     Line number of the failing assert call.
 * @param[in] p_file_name  File name of the failing assert call.
 */
void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
{
    app_error_handler(0xDEADBEEF, line_num, p_file_name);
}


/**@brief Function for handling the LED Button Service Client errors.
 *
 * @param[in]   nrf_error   Error code containing information about what went wrong.
 */
static void lbs_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}



/**@brief Function for the LEDs initialization.
 *
 * @details Initializes all LEDs used by the application.
 */
static void leds_init(void)
{
    bsp_board_init(BSP_INIT_LEDS);
}


static void scan_evt_handler(scan_evt_t const * p_scan_evt)
{
    ret_code_t err_code;

    switch(p_scan_evt->scan_evt_id)
    {
        case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
        {
            err_code = p_scan_evt->params.connecting_err.err_code;
            APP_ERROR_CHECK(err_code);
        } break;

        case NRF_BLE_SCAN_EVT_CONNECTED:
         {
            ble_gap_evt_connected_t const * p_connected =
                             p_scan_evt->params.connected.p_connected;
             // Scan is automatically stopped by the connection.
             NRF_LOG_INFO("Connecting to target %02x%02x%02x%02x%02x%02x",
                      p_connected->peer_addr.addr[0],
                      p_connected->peer_addr.addr[1],
                      p_connected->peer_addr.addr[2],
                      p_connected->peer_addr.addr[3],
                      p_connected->peer_addr.addr[4],
                      p_connected->peer_addr.addr[5]
                        );
         } break;

        default:
            break;
    }
}


/**@brief Function for initializing the scanning and setting the filters.
 */
static void scan_init(void)
{
    ret_code_t          err_code;
    nrf_ble_scan_init_t init_scan;

    memset(&init_scan, 0, sizeof(init_scan));

    init_scan.connect_if_match = true;
    init_scan.conn_cfg_tag     = APP_BLE_CONN_CFG_TAG;

    err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_NAME_FILTER, m_target_periph_name);
    APP_ERROR_CHECK(err_code);

    err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_NAME_FILTER, false);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for starting scanning. */
static void scan_start(void)
{
    ret_code_t ret;

    NRF_LOG_INFO("Start scanning for device name %s.", (uint32_t)m_target_periph_name);
    ret = nrf_ble_scan_start(&m_scan);
    APP_ERROR_CHECK(ret);
    // Turn on the LED to signal scanning.
    bsp_board_led_on(CENTRAL_SCANNING_LED);
}



/**@brief Function for handling BLE events.
 *
 * @param[in]   p_ble_evt   Bluetooth stack event.
 * @param[in]   p_context   Unused.
 */
static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
{
    ret_code_t err_code;
    static uint16_t start_handle = 1;
    static uint16_t last = 0;

    // For readability.
    ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;

    //NRF_LOG_INFO("EVT ID: 0x%x ", p_ble_evt->header.evt_id);

    switch (p_ble_evt->header.evt_id)
    {
        // Upon connection, check which peripheral is connected, initiate DB
        // discovery, update LEDs status, and resume scanning, if necessary.
        case BLE_GAP_EVT_CONNECTED:
        {
            NRF_LOG_INFO("Connection 0x%x established, starting DB discovery.",
                         p_ble_evt->evt.gap_evt.conn_handle);

            APP_ERROR_CHECK_BOOL(p_gap_evt->conn_handle < NRF_SDH_BLE_CENTRAL_LINK_COUNT);

            memset(&m_db_disc, 0, sizeof(m_db_disc));
            err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);

            // Update LEDs status and check whether it is needed to look for more
            // peripherals to connect to.
            bsp_board_led_on(CENTRAL_CONNECTED_LED);
            if (ble_conn_state_central_conn_count() == NRF_SDH_BLE_CENTRAL_LINK_COUNT)
            {
                bsp_board_led_off(CENTRAL_SCANNING_LED);
            }
            else
            {
                // Resume scanning.
                bsp_board_led_on(CENTRAL_SCANNING_LED);
                scan_start();
            }
        } break; // BLE_GAP_EVT_CONNECTED

        // Upon disconnection, reset the connection handle of the peer that disconnected, update
        // the LEDs status and start scanning again.
        case BLE_GAP_EVT_DISCONNECTED:
        {
            NRF_LOG_INFO("Central link 0x%x disconnected (reason: 0x%x)",
                         p_gap_evt->conn_handle,
                         p_gap_evt->params.disconnected.reason);

            if (ble_conn_state_central_conn_count() == 0)
            {
                err_code = app_button_disable();
                APP_ERROR_CHECK(err_code);

                // Turn off the LED that indicates the connection.
                bsp_board_led_off(CENTRAL_CONNECTED_LED);
            }

            // Start scanning.
            scan_start();

            // Turn on the LED for indicating scanning.
            bsp_board_led_on(CENTRAL_SCANNING_LED);

            start_handle = 1;
            last = 0;

        } break;

        case BLE_GAP_EVT_TIMEOUT:
        {
            // Timeout for scanning is not specified, so only the connection requests can time out.
            if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
            {
                NRF_LOG_DEBUG("Connection request timed out.");
            }
        } break;

        case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST.");
            // Accept parameters requested by peer.
            err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
                                        &p_gap_evt->params.conn_param_update_request.conn_params);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
        {
            NRF_LOG_DEBUG("PHY update request.");
            ble_gap_phys_t const phys =
            {
                .rx_phys = BLE_GAP_PHY_AUTO,
                .tx_phys = BLE_GAP_PHY_AUTO,
            };
            err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTC_EVT_TIMEOUT:
        {
            // Disconnect on GATT client timeout event.
            NRF_LOG_DEBUG("GATT client timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_GATTS_EVT_TIMEOUT:
        {
            // Disconnect on GATT server timeout event.
            NRF_LOG_DEBUG("GATT server timeout.");
            err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
                                             BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
            APP_ERROR_CHECK(err_code);
        } break;

         /*case BLE_GAP_EVT_AUTH_STATUS:
             NRF_LOG_INFO("BLE_GAP_EVT_AUTH_STATUS: status=0x%x bond=0x%x lv4: %d kdist_own:0x%x kdist_peer:0x%x",
                          p_ble_evt->evt.gap_evt.params.auth_status.auth_status,
                          p_ble_evt->evt.gap_evt.params.auth_status.bonded,
                          p_ble_evt->evt.gap_evt.params.auth_status.sm1_levels.lv4,
                          *((uint8_t *)&p_ble_evt->evt.gap_evt.params.auth_status.kdist_own),
                          *((uint8_t *)&p_ble_evt->evt.gap_evt.params.auth_status.kdist_peer));
            break;

          /*case BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP:
                	NRF_LOG_INFO("Found service");
                        NRF_LOG_INFO("Last handle %x , start handle %x ", last, start_handle);

            if (p_ble_evt->evt.gattc_evt.gatt_status != BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND)
            {
              last = p_ble_evt->evt.gattc_evt.params.prim_srvc_disc_rsp.count - 1;
              start_handle = p_ble_evt->evt.gattc_evt.params.prim_srvc_disc_rsp.services[last].handle_range.end_handle + 1;
              err_code = sd_ble_gattc_primary_services_discover(p_gap_evt->conn_handle, start_handle, NULL);
              APP_ERROR_CHECK(err_code);
            }
            else
            {
              NRF_LOG_INFO("Got BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND");  
            }*/

                            
            break;

        default:
            // No implementation needed.
            break;
    }
}

/**@brief Function for handling the Nordic UART Service Client errors.
 *
 * @param[in]   nrf_error   Error code containing information about what went wrong.
 */
static void bps_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}


/**@brief Heart Rate Collector Handler.
 */
//static void hrs_c_evt_handler(ble_hrs_c_t * p_hrs_c, ble_hrs_c_evt_t * p_hrs_c_evt)
static void bps_c_evt_handler(ble_bps_c_t * p_bps, ble_bps_c_evt_t const * ble_bps_evt)
{
    ret_code_t err_code;

    switch (ble_bps_evt->evt_type)
    {
        case BLE_BPS_C_EVT_DISCOVERY_COMPLETE:
        {
            NRF_LOG_DEBUG("Heart rate service discovered.");

            err_code = ble_bps_c_handles_assign(p_bps,
                                                ble_bps_evt->conn_handle,
                                                &ble_bps_evt->params.peer_db);
            APP_ERROR_CHECK(err_code);

            // Initiate bonding.
            err_code = pm_conn_secure(ble_bps_evt->conn_handle, false);
            if (err_code != NRF_ERROR_BUSY)
            {
                APP_ERROR_CHECK(err_code);
            }

            // Heart rate service discovered. Enable indication.
            err_code = ble_bps_c_meas_indication_enable(p_bps);
            APP_ERROR_CHECK(err_code);
        } break;

        case BLE_BPS_C_EVT_MEAS_INDICATION:
        {
            NRF_LOG_INFO("BP Meas example %f", ble_bps_evt->params.meas.blood_pressure_systolic);
            
        } break;

        default:
            break;
    }
}


static void bps_c_init(void)
{
    ret_code_t       err_code;
    ble_bps_c_init_t   init;

    init.evt_handler   = bps_c_evt_handler;
    init.error_handler = bps_error_handler;
    init.p_gatt_queue  = &m_ble_gatt_queue;

    err_code = ble_bps_c_init(&m_bps_c, &init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing the BLE stack.
 *
 * @details Initializes the SoftDevice and the BLE event interrupts.
 */
static void ble_stack_init(void)
{
    ret_code_t err_code;

    err_code = nrf_sdh_enable_request();
    APP_ERROR_CHECK(err_code);

    // Configure the BLE stack using the default settings.
    // Fetch the start address of the application RAM.
    uint32_t ram_start = 0;
    err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
    APP_ERROR_CHECK(err_code);

    // Enable BLE stack.
    err_code = nrf_sdh_ble_enable(&ram_start);
    APP_ERROR_CHECK(err_code);

    // Register a handler for BLE events.
    NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
}

/**@brief Function for handling Peer Manager events.
 *
 * @param[in] p_evt  Peer Manager event.
 */
static void pm_evt_handler(pm_evt_t const * p_evt)
{
    pm_handler_on_pm_evt(p_evt);
    pm_handler_flash_clean(p_evt);

    switch (p_evt->evt_id)
    {
        case PM_EVT_PEERS_DELETE_SUCCEEDED:
            // Bonds are deleted. Start scanning.
            scan_start();
            break;

        default:
            break;
    }
}

/**@brief Function for the Peer Manager initialization.
 */
static void peer_manager_init(void)
{
    ble_gap_sec_params_t sec_param;
    ret_code_t err_code;

    err_code = pm_init();
    APP_ERROR_CHECK(err_code);

    memset(&sec_param, 0, sizeof(ble_gap_sec_params_t));

    // Security parameters to be used for all security procedures.
    sec_param.bond           = SEC_PARAM_BOND;
    sec_param.mitm           = SEC_PARAM_MITM;
    sec_param.lesc           = SEC_PARAM_LESC;
    sec_param.keypress       = SEC_PARAM_KEYPRESS;
    sec_param.io_caps        = SEC_PARAM_IO_CAPABILITIES;
    sec_param.oob            = SEC_PARAM_OOB;
    sec_param.min_key_size   = SEC_PARAM_MIN_KEY_SIZE;
    sec_param.max_key_size   = SEC_PARAM_MAX_KEY_SIZE;
    sec_param.kdist_own.enc  = 1;
    sec_param.kdist_own.id   = 1;
    sec_param.kdist_peer.enc = 1;
    sec_param.kdist_peer.id  = 1;

    err_code = pm_sec_params_set(&sec_param);
    APP_ERROR_CHECK(err_code);

    err_code = pm_register(pm_evt_handler);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling events from the button handler module.
 *
 * @param[in] pin_no        The pin that the event applies to.
 * @param[in] button_action The button action (press or release).
 */
static void button_event_handler(uint8_t pin_no, uint8_t button_action)
{
    ret_code_t err_code;

    switch (pin_no)
    {
        case LEDBUTTON_BUTTON:
            //err_code = led_status_send_to_all(button_action);
            if (err_code == NRF_SUCCESS)
            {
                NRF_LOG_INFO("LBS write LED state %d", button_action);
            }
            break;

        default:
            APP_ERROR_HANDLER(pin_no);
            break;
    }
}


/**@brief Function for initializing the button handler module.
 */
static void buttons_init(void)
{
    ret_code_t err_code;

   // The array must be static because a pointer to it is saved in the button handler module.
    static app_button_cfg_t buttons[] =
    {
        {LEDBUTTON_BUTTON, false, BUTTON_PULL, button_event_handler}
    };

    err_code = app_button_init(buttons, ARRAY_SIZE(buttons), BUTTON_DETECTION_DELAY);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling database discovery events.
 *
 * @details This function is a callback function to handle events from the database discovery module.
 *          Depending on the UUIDs that are discovered, this function forwards the events
 *          to their respective services.
 *
 * @param[in] p_event  Pointer to the database discovery event.
 */
static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
{
    NRF_LOG_INFO("call to ble_bps_on_db_disc_evt for instance 0x%x and handle 0x%x!",
                  p_evt->params.p_db_instance,
                  p_evt->conn_handle);

    NRF_LOG_INFO("APP FOUND %d CHARACTERISTICS.", p_evt->params.discovered_db.char_count);

    NRF_LOG_INFO("APP FOUND SERVICE UUID 0x%x", p_evt->params.discovered_db.srv_uuid.uuid);
    ble_bps_on_db_disc_evt(&m_bps_c, p_evt);
    ble_bas_on_db_disc_evt(&m_bas_c, p_evt);
}


/**@brief Battery level Collector Handler.
 */
static void bas_c_evt_handler(ble_bas_c_t * p_bas_c, ble_bas_c_evt_t * p_bas_c_evt)
{
    ret_code_t err_code;

    switch (p_bas_c_evt->evt_type)
    {
        case BLE_BAS_C_EVT_DISCOVERY_COMPLETE:
        {
            err_code = ble_bas_c_handles_assign(p_bas_c,
                                                p_bas_c_evt->conn_handle,
                                                &p_bas_c_evt->params.bas_db);
            APP_ERROR_CHECK(err_code);

            // Battery service discovered. Enable notification of Battery Level.
            NRF_LOG_DEBUG("Battery Service discovered. Reading battery level.");

            err_code = ble_bas_c_bl_read(p_bas_c);
            APP_ERROR_CHECK(err_code);

            NRF_LOG_DEBUG("Enabling Battery Level Notification.");
            err_code = ble_bas_c_bl_notif_enable(p_bas_c);
            APP_ERROR_CHECK(err_code);

        } break;

        case BLE_BAS_C_EVT_BATT_NOTIFICATION:
            NRF_LOG_INFO("Battery Level received %d %%.", p_bas_c_evt->params.battery_level);
            break;

        case BLE_BAS_C_EVT_BATT_READ_RESP:
            NRF_LOG_INFO("Battery Level Read as %d %%.", p_bas_c_evt->params.battery_level);
            break;

        default:
            break;
    }
}

/**@brief Function for handling the Heart Rate Service Client and Battery Service Client errors.
 *
 * @param[in]   nrf_error   Error code containing information about what went wrong.
 */
static void service_error_handler(uint32_t nrf_error)
{
    APP_ERROR_HANDLER(nrf_error);
}


/**
 * @brief Battery level collector initialization.
 */
static void bas_c_init(void)
{
    ble_bas_c_init_t bas_c_init_obj;

    bas_c_init_obj.evt_handler   = bas_c_evt_handler;
    bas_c_init_obj.error_handler = service_error_handler;
    bas_c_init_obj.p_gatt_queue  = &m_ble_gatt_queue;

    ret_code_t err_code = ble_bas_c_init(&m_bas_c, &bas_c_init_obj);
    APP_ERROR_CHECK(err_code);
}


/** @brief Database discovery initialization.
 */
static void db_discovery_init(void)
{
    ble_db_discovery_init_t db_init;

    memset(&db_init, 0, sizeof(ble_db_discovery_init_t));

    db_init.evt_handler  = db_disc_handler;
    db_init.p_gatt_queue = &m_ble_gatt_queue;

    ret_code_t err_code = ble_db_discovery_init(&db_init);
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for initializing power management.
 */
static void power_management_init(void)
{
    ret_code_t err_code;
    err_code = nrf_pwr_mgmt_init();
    APP_ERROR_CHECK(err_code);
}


/**@brief Function for handling the idle state (main loop).
 *
 * @details This function handles any pending log operations, then sleeps until the next event occurs.
 */
static void idle_state_handle(void)
{
    if (NRF_LOG_PROCESS() == false)
    {
        nrf_pwr_mgmt_run();
    }
}


/** @brief Function for initializing the log module.
 */
static void log_init(void)
{
    ret_code_t err_code = NRF_LOG_INIT(NULL);
    APP_ERROR_CHECK(err_code);

    NRF_LOG_DEFAULT_BACKENDS_INIT();
}


/** @brief Function for initializing the timer.
 */
static void timer_init(void)
{
    ret_code_t err_code = app_timer_init();
    APP_ERROR_CHECK(err_code);
}

/**@brief GATT module event handler.
 */
static void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
{
    switch (p_evt->evt_id)
    {
        case NRF_BLE_GATT_EVT_ATT_MTU_UPDATED:
        {
            NRF_LOG_INFO("GATT ATT MTU on connection 0x%x changed to %d.",
                         p_evt->conn_handle,
                         p_evt->params.att_mtu_effective);
        } break;

        case NRF_BLE_GATT_EVT_DATA_LENGTH_UPDATED:
        {
            NRF_LOG_INFO("Data length for connection 0x%x updated to %d.",
                         p_evt->conn_handle,
                         p_evt->params.data_length);
        } break;

        default:
            break;
    }
}

/**@brief Function for initializing the GATT module.
 */
static void gatt_init(void)
{
    ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
    APP_ERROR_CHECK(err_code);
}


int main(void)
{
    // Initialize.
    log_init();
    timer_init();
    leds_init();
    buttons_init();
    db_discovery_init();
    power_management_init();
    ble_stack_init();
    gatt_init();
    bps_c_init();
    ble_conn_state_init();
    bas_c_init();
    scan_init();
    peer_manager_init();


    // Start execution.
    NRF_LOG_INFO("C-Detect-LIKE example started.");
    scan_start();

    for (;;)
    {
        idle_state_handle();
    }
}
