1663784062.8476357

21-Sep-2022 11:14:22 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:14:22 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:14:22 (-0700) INFO: Started PID 20176
21-Sep-2022 11:14:22 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:14:22 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:14:22 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:14:22 (-0700) INFO: Opening serial port None
21-Sep-2022 11:14:22 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:14:22 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:14:22 (-0700) INFO: Opening serial port None
21-Sep-2022 11:14:22 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:14:23 (-0700) INFO: closing UART
21-Sep-2022 11:14:23 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:14:23 (-0700) INFO: closing UART
21-Sep-2022 11:14:23 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:14:23 (-0700) INFO: closing UART
21-Sep-2022 11:14:23 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:14:24 (-0700) INFO: closing UART
21-Sep-2022 11:14:24 (-0700) INFO: Exiting PID 20176
21-Sep-2022 11:14:35 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:14:35 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:14:35 (-0700) INFO: Started PID 3728
21-Sep-2022 11:14:35 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:14:35 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:14:35 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:14:35 (-0700) INFO: Opening serial port None
21-Sep-2022 11:14:35 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:14:35 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:14:35 (-0700) INFO: Opening serial port None
21-Sep-2022 11:14:35 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:14:35 (-0700) INFO: closing UART
21-Sep-2022 11:14:35 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:14:36 (-0700) INFO: closing UART
21-Sep-2022 11:14:36 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:14:36 (-0700) INFO: closing UART
21-Sep-2022 11:14:36 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:14:36 (-0700) INFO: closing UART
21-Sep-2022 11:14:36 (-0700) INFO: Exiting PID 3728
21-Sep-2022 11:16:16 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:16 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:16 (-0700) INFO: Started PID 1092
21-Sep-2022 11:16:16 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:16 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:16:16 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:16:16 (-0700) INFO: Opening serial port None
21-Sep-2022 11:16:16 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:16:16 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:16:16 (-0700) INFO: Opening serial port None
21-Sep-2022 11:16:16 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:16:17 (-0700) INFO: closing UART
21-Sep-2022 11:16:17 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:16:17 (-0700) INFO: closing UART
21-Sep-2022 11:16:17 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:17 (-0700) INFO: closing UART
21-Sep-2022 11:16:17 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:17 (-0700) INFO: closing UART
21-Sep-2022 11:16:17 (-0700) INFO: Exiting PID 1092
21-Sep-2022 11:16:23 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:23 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:23 (-0700) INFO: Started PID 5856
21-Sep-2022 11:16:23 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:23 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:16:23 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:16:23 (-0700) INFO: Opening serial port None
21-Sep-2022 11:16:23 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:16:23 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:16:23 (-0700) INFO: Opening serial port None
21-Sep-2022 11:16:23 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:16:24 (-0700) INFO: closing UART
21-Sep-2022 11:16:24 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:16:24 (-0700) INFO: closing UART
21-Sep-2022 11:16:24 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:24 (-0700) INFO: closing UART
21-Sep-2022 11:16:24 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:25 (-0700) INFO: closing UART
21-Sep-2022 11:16:25 (-0700) INFO: Exiting PID 5856
21-Sep-2022 11:16:35 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:35 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:35 (-0700) INFO: Started PID 6812
21-Sep-2022 11:16:35 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:35 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:16:35 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:16:35 (-0700) INFO: Opening serial port None
21-Sep-2022 11:16:35 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:16:35 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:16:35 (-0700) INFO: Opening serial port None
21-Sep-2022 11:16:35 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:16:36 (-0700) INFO: closing UART
21-Sep-2022 11:16:36 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:16:36 (-0700) INFO: closing UART
21-Sep-2022 11:16:36 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:36 (-0700) INFO: closing UART
21-Sep-2022 11:16:36 (-0700) INFO: Exiting PID 6812
21-Sep-2022 11:16:36 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:36 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:36 (-0700) INFO: Started PID 1268
21-Sep-2022 11:16:36 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:36 (-0700) INFO: main exit PID 1268
21-Sep-2022 11:16:36 (-0700) INFO: Exiting PID 1268
21-Sep-2022 11:16:37 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:37 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:37 (-0700) INFO: Started PID 13012
21-Sep-2022 11:16:37 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=True, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:37 (-0700) INFO: main exit PID 13012
21-Sep-2022 11:16:37 (-0700) INFO: Exiting PID 13012
21-Sep-2022 11:16:40 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:40 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:40 (-0700) INFO: Started PID 8372
21-Sep-2022 11:16:40 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:40 (-0700) INFO: main exit PID 8372
21-Sep-2022 11:16:40 (-0700) INFO: Exiting PID 8372
21-Sep-2022 11:16:40 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:40 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:40 (-0700) INFO: Started PID 20308
21-Sep-2022 11:16:40 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:16:40 (-0700) INFO: main exit PID 20308
21-Sep-2022 11:16:40 (-0700) INFO: Exiting PID 20308
21-Sep-2022 11:16:40 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:16:40 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:16:40 (-0700) INFO: Started PID 7352
21-Sep-2022 11:16:40 (-0700) INFO: Namespace(capture=True, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo='\\\\.\\pipe\\wireshark_extcap_COM11-3.6_20220921111640', extcap_control_in='\\\\.\\pipe\\wireshark_control_ws_to_ext_COM11-3.6_20220921111640', extcap_control_out='\\\\.\\pipe\\wireshark_control_ext_to_ws_COM11-3.6_20220921111640', extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=True, scan_follow_aux=True, coded=False)
21-Sep-2022 11:16:40 (-0700) INFO: sniffer capture
21-Sep-2022 11:16:40 (-0700) INFO: Log started at Wed Sep 21 11:16:40 2022
21-Sep-2022 11:16:40 (-0700) INFO: Extcap version 3.6
21-Sep-2022 11:16:40 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:41 (-0700) INFO: closing UART
21-Sep-2022 11:16:41 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:16:41 (-0700) INFO: closing UART
21-Sep-2022 11:16:41 (-0700) INFO: Tearing down
21-Sep-2022 11:16:41 (-0700) INFO: Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 613, in sniffer_capture
    baudrate = get_default_baudrate(interface, fifo)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 557, in get_default_baudrate
    error_interface_not_found(interface, fifo)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 544, in error_interface_not_found
    sys.exit(ERROR_INTERFACE)
SystemExit: 2

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 843, in <module>
    sniffer_capture(interface, args.baudrate, args.fifo, args.extcap_control_in, args.extcap_control_out)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 674, in sniffer_capture
    sniffer.doExit()
UnboundLocalError: local variable 'sniffer' referenced before assignment

21-Sep-2022 11:16:41 (-0700) INFO: internal error: UnboundLocalError("local variable 'sniffer' referenced before assignment")
21-Sep-2022 11:16:41 (-0700) INFO: Exiting PID 7352
21-Sep-2022 11:17:35 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:17:35 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:17:35 (-0700) INFO: Started PID 14720
21-Sep-2022 11:17:35 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:17:35 (-0700) INFO: main exit PID 14720
21-Sep-2022 11:17:35 (-0700) INFO: Exiting PID 14720
21-Sep-2022 11:17:35 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:17:35 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:17:35 (-0700) INFO: Started PID 19272
21-Sep-2022 11:17:35 (-0700) INFO: Namespace(capture=True, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo='\\\\.\\pipe\\wireshark_extcap_COM11-3.6_20220921111735', extcap_control_in='\\\\.\\pipe\\wireshark_control_ws_to_ext_COM11-3.6_20220921111735', extcap_control_out='\\\\.\\pipe\\wireshark_control_ext_to_ws_COM11-3.6_20220921111735', extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=True, scan_follow_aux=True, coded=False)
21-Sep-2022 11:17:35 (-0700) INFO: sniffer capture
21-Sep-2022 11:17:35 (-0700) INFO: Log started at Wed Sep 21 11:17:35 2022
21-Sep-2022 11:17:35 (-0700) INFO: Extcap version 3.6
21-Sep-2022 11:17:35 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:17:36 (-0700) INFO: closing UART
21-Sep-2022 11:17:36 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:17:36 (-0700) INFO: closing UART
21-Sep-2022 11:17:36 (-0700) INFO: Tearing down
21-Sep-2022 11:17:36 (-0700) INFO: Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 613, in sniffer_capture
    baudrate = get_default_baudrate(interface, fifo)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 557, in get_default_baudrate
    error_interface_not_found(interface, fifo)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 544, in error_interface_not_found
    sys.exit(ERROR_INTERFACE)
SystemExit: 2

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 843, in <module>
    sniffer_capture(interface, args.baudrate, args.fifo, args.extcap_control_in, args.extcap_control_out)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 674, in sniffer_capture
    sniffer.doExit()
UnboundLocalError: local variable 'sniffer' referenced before assignment

21-Sep-2022 11:17:36 (-0700) INFO: internal error: UnboundLocalError("local variable 'sniffer' referenced before assignment")
21-Sep-2022 11:17:36 (-0700) INFO: Exiting PID 19272
21-Sep-2022 11:24:10 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:24:10 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:24:10 (-0700) INFO: Started PID 17852
21-Sep-2022 11:24:10 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:24:10 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port None
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:24:10 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port None
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:24:10 (-0700) INFO: closing UART
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:24:10 (-0700) INFO: closing UART
21-Sep-2022 11:24:10 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:24:11 (-0700) INFO: closing UART
21-Sep-2022 11:24:11 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:24:11 (-0700) INFO: closing UART
21-Sep-2022 11:24:11 (-0700) INFO: Exiting PID 17852
21-Sep-2022 11:24:16 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:24:16 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:24:16 (-0700) INFO: Started PID 19092
21-Sep-2022 11:24:16 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:24:16 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port None
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:24:16 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port None
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:24:16 (-0700) INFO: closing UART
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:24:16 (-0700) INFO: closing UART
21-Sep-2022 11:24:16 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:24:17 (-0700) INFO: closing UART
21-Sep-2022 11:24:17 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:24:17 (-0700) INFO: closing UART
21-Sep-2022 11:24:17 (-0700) INFO: Exiting PID 19092
21-Sep-2022 11:26:37 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:26:37 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:26:37 (-0700) INFO: Started PID 4464
21-Sep-2022 11:26:37 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:26:37 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port None
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:26:37 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port None
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:26:37 (-0700) INFO: closing UART
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:26:37 (-0700) INFO: closing UART
21-Sep-2022 11:26:37 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:26:37 (-0700) INFO: closing UART
21-Sep-2022 11:26:37 (-0700) INFO: Exiting PID 4464
21-Sep-2022 11:26:37 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:26:37 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:26:37 (-0700) INFO: Started PID 9948
21-Sep-2022 11:26:37 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:26:37 (-0700) INFO: main exit PID 9948
21-Sep-2022 11:26:37 (-0700) INFO: Exiting PID 9948
21-Sep-2022 11:26:38 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:26:38 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:26:38 (-0700) INFO: Started PID 20060
21-Sep-2022 11:26:38 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=True, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:26:38 (-0700) INFO: main exit PID 20060
21-Sep-2022 11:26:38 (-0700) INFO: Exiting PID 20060
21-Sep-2022 11:26:46 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:26:46 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:26:46 (-0700) INFO: Started PID 13864
21-Sep-2022 11:26:46 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:26:46 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:26:46 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:26:46 (-0700) INFO: Opening serial port None
21-Sep-2022 11:26:46 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:26:46 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:26:46 (-0700) INFO: Opening serial port None
21-Sep-2022 11:26:46 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:26:47 (-0700) INFO: closing UART
21-Sep-2022 11:26:47 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:26:47 (-0700) INFO: closing UART
21-Sep-2022 11:26:47 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:26:47 (-0700) INFO: closing UART
21-Sep-2022 11:26:47 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:26:48 (-0700) INFO: closing UART
21-Sep-2022 11:26:48 (-0700) INFO: Exiting PID 13864
21-Sep-2022 11:33:11 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:33:11 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:33:11 (-0700) INFO: Started PID 13096
21-Sep-2022 11:33:11 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:33:11 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port None
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:33:11 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port None
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:33:11 (-0700) INFO: closing UART
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:33:11 (-0700) INFO: closing UART
21-Sep-2022 11:33:11 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:33:12 (-0700) INFO: closing UART
21-Sep-2022 11:33:12 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:33:12 (-0700) INFO: closing UART
21-Sep-2022 11:33:12 (-0700) INFO: Exiting PID 13096
21-Sep-2022 11:33:16 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:33:16 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:33:16 (-0700) INFO: Started PID 4084
21-Sep-2022 11:33:16 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:33:16 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port None
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:33:16 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port None
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:33:16 (-0700) INFO: closing UART
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:33:16 (-0700) INFO: closing UART
21-Sep-2022 11:33:16 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:33:17 (-0700) INFO: closing UART
21-Sep-2022 11:33:17 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:33:17 (-0700) INFO: closing UART
21-Sep-2022 11:33:17 (-0700) INFO: Exiting PID 4084
21-Sep-2022 11:33:46 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:33:46 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:33:46 (-0700) INFO: Started PID 7300
21-Sep-2022 11:33:46 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:33:46 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:33:46 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:33:46 (-0700) INFO: Opening serial port None
21-Sep-2022 11:33:46 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:33:46 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:33:46 (-0700) INFO: Opening serial port None
21-Sep-2022 11:33:46 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:33:46 (-0700) INFO: closing UART
21-Sep-2022 11:33:46 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:33:47 (-0700) INFO: closing UART
21-Sep-2022 11:33:47 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:33:47 (-0700) INFO: closing UART
21-Sep-2022 11:33:47 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:33:47 (-0700) INFO: closing UART
21-Sep-2022 11:33:47 (-0700) INFO: Exiting PID 7300
21-Sep-2022 11:34:10 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:34:10 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:34:10 (-0700) INFO: Started PID 2924
21-Sep-2022 11:34:10 (-0700) INFO: Namespace(capture=False, extcap_interfaces=True, extcap_interface=None, extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version='3.6', device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:34:10 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:34:10 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:34:10 (-0700) INFO: Opening serial port None
21-Sep-2022 11:34:10 (-0700) INFO: Opening serial port COM4
21-Sep-2022 11:34:10 (-0700) ERROR: Error opening UART could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\Packet.py", line 74, in __init__
    self.uart = UART.Uart(portnum, baudrate)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\SnifferAPI\UART.py", line 124, in __init__
    self.ser = serial.Serial(
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 33, in __init__
    super(Serial, self).__init__(*args, **kwargs)
  File "C:\Python310\lib\site-packages\serial\serialutil.py", line 244, in __init__
    self.open()
  File "C:\Python310\lib\site-packages\serial\serialwin32.py", line 64, in open
    raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, 'Access is denied.', None, 5)
21-Sep-2022 11:34:10 (-0700) INFO: Opening serial port None
21-Sep-2022 11:34:10 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:34:10 (-0700) INFO: closing UART
21-Sep-2022 11:34:10 (-0700) INFO: Opening serial port COM12
21-Sep-2022 11:34:11 (-0700) INFO: closing UART
21-Sep-2022 11:34:11 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:34:11 (-0700) INFO: closing UART
21-Sep-2022 11:34:11 (-0700) INFO: Exiting PID 2924
21-Sep-2022 11:34:11 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:34:11 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:34:11 (-0700) INFO: Started PID 20456
21-Sep-2022 11:34:11 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:34:11 (-0700) INFO: main exit PID 20456
21-Sep-2022 11:34:11 (-0700) INFO: Exiting PID 20456
21-Sep-2022 11:34:12 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:34:12 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:34:12 (-0700) INFO: Started PID 20244
21-Sep-2022 11:34:12 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=True, extcap_config=False, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:34:12 (-0700) INFO: main exit PID 20244
21-Sep-2022 11:34:12 (-0700) INFO: Exiting PID 20244
21-Sep-2022 11:34:14 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:34:14 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:34:14 (-0700) INFO: Started PID 18316
21-Sep-2022 11:34:14 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:34:14 (-0700) INFO: main exit PID 18316
21-Sep-2022 11:34:14 (-0700) INFO: Exiting PID 18316
21-Sep-2022 11:34:14 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:34:14 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:34:14 (-0700) INFO: Started PID 776
21-Sep-2022 11:34:14 (-0700) INFO: Namespace(capture=False, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=True, extcap_capture_filter=None, fifo=None, extcap_control_in=None, extcap_control_out=None, extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=False, scan_follow_aux=False, coded=False)
21-Sep-2022 11:34:14 (-0700) INFO: main exit PID 776
21-Sep-2022 11:34:14 (-0700) INFO: Exiting PID 776
21-Sep-2022 11:34:15 (-0700) INFO: --------------------------------------------------------
21-Sep-2022 11:34:15 (-0700) INFO: Software version: 4.1.0
21-Sep-2022 11:34:15 (-0700) INFO: Started PID 8876
21-Sep-2022 11:34:15 (-0700) INFO: Namespace(capture=True, extcap_interfaces=False, extcap_interface='COM11-3.6', extcap_dlts=False, extcap_config=False, extcap_capture_filter=None, fifo='\\\\.\\pipe\\wireshark_extcap_COM11-3.6_20220921113414', extcap_control_in='\\\\.\\pipe\\wireshark_control_ws_to_ext_COM11-3.6_20220921113414', extcap_control_out='\\\\.\\pipe\\wireshark_control_ext_to_ws_COM11-3.6_20220921113414', extcap_version=None, device='', baudrate=None, only_advertising=False, only_legacy_advertising=False, scan_follow_rsp=True, scan_follow_aux=True, coded=False)
21-Sep-2022 11:34:15 (-0700) INFO: sniffer capture
21-Sep-2022 11:34:15 (-0700) INFO: Log started at Wed Sep 21 11:34:15 2022
21-Sep-2022 11:34:15 (-0700) INFO: Extcap version 3.6
21-Sep-2022 11:34:15 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:34:15 (-0700) INFO: closing UART
21-Sep-2022 11:34:15 (-0700) INFO: Opening serial port COM11
21-Sep-2022 11:34:15 (-0700) INFO: closing UART
21-Sep-2022 11:34:15 (-0700) INFO: Tearing down
21-Sep-2022 11:34:15 (-0700) INFO: Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 613, in sniffer_capture
    baudrate = get_default_baudrate(interface, fifo)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 557, in get_default_baudrate
    error_interface_not_found(interface, fifo)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 544, in error_interface_not_found
    sys.exit(ERROR_INTERFACE)
SystemExit: 2

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 843, in <module>
    sniffer_capture(interface, args.baudrate, args.fifo, args.extcap_control_in, args.extcap_control_out)
  File "C:\Users\pam\AppData\Roaming\Wireshark\extcap\nrf_sniffer_ble.py", line 674, in sniffer_capture
    sniffer.doExit()
UnboundLocalError: local variable 'sniffer' referenced before assignment

21-Sep-2022 11:34:15 (-0700) INFO: internal error: UnboundLocalError("local variable 'sniffer' referenced before assignment")
21-Sep-2022 11:34:15 (-0700) INFO: Exiting PID 8876