SEGGER J-Link V7.94i - Real time terminal output
SEGGER J-Link V11.0, SN=821001711
Process: JLink.exe
[00:00:14.754,455] <dbg> main: main: Hello world!
--- 3 messages dropped ---
[00:00:14.754,760] <dbg> fs_nvs: nvs_recover_last_ate: Recovering last ate from sector 0
[00:00:14.760,223] <inf> fs_nvs: 2 Sectors of 4096 bytes
[00:00:14.760,253] <inf> fs_nvs: alloc wra: 0, d68
[00:00:14.760,253] <inf> fs_nvs: data wra: 0, 3f0
[00:00:14.760,437] <inf> bt_sdc_hci_driver: SoftDevice Controller build revision: 
                                            fe 2c f9 6a 7f 36 22 2e  a0 79 c0 40 be 2c 03 20 |.,.j.6". .y.@.,. 
                                            40 c2 f3 32                                      |@..2             
[00:00:14.763,580] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
[00:00:14.763,610] <inf> bt_hci_core: HW Variant: nRF52x (0x0002)
[00:00:14.763,641] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 254.63788 Build 573996906
[00:00:14.764,160] <inf> bt_hci_core: No ID address. App must call settings_load()
[00:00:14.768,096] <inf> bt_hci_core: Identity: F3:A9:1D:26:35:79 (random)
[00:00:14.768,127] <inf> bt_hci_core: HCI: version 6.0 (0x0e) revision 0x104e, manufacturer 0x0059
[00:00:14.768,157] <inf> bt_hci_core: LMP: version 6.0 (0x0e) subver 0x104e
[00:00:14.778,778] <dbg> pwm_nrfx: pwm_nrfx_set_cycles: channel 0, pulse 0, period 32000, prescaler: 0.
[00:00:14.778,839] <dbg> pwm_nrfx: pwm_nrfx_set_cycles: channel 0, pulse 0, period 32000, prescaler: 0.
[00:00:19.924,438] <dbg> ble: ble_init: BLE enabled.
[00:00:19.925,933] <inf> ble: --- MY MAC ADDRESS: F3:A9:1D:26:35:79 (random) ---
[00:00:19.925,933] <inf> ble: Known bonds:
[00:00:19.926,025] <inf> ble: 0. 9C:25:95:6E:95:66 (public)
[00:00:19.926,116] <inf> ble: 1. 84:AB:1A:A1:0E:BF (public)
[00:00:19.926,147] <inf> ble: ---- total: 2 ----
[00:00:19.930,206] <wrn> bt_hci_core: opcode 0x2027 status 0x12 
[00:00:19.930,236] <err> bt_id: Failed to add IRK to controller
[00:00:19.930,938] <wrn> bt_hci_core: opcode 0x2027 status 0x12 
[00:00:19.930,969] <err> bt_id: Failed to add IRK to controller
[00:00:21.931,488] <inf> ble: ---- Acceptance list ----
[00:00:21.931,793] <inf> ble: 9C:25:95:6E:95:66 (public)
[00:00:21.932,098] <inf> ble: 84:AB:1A:A1:0E:BF (public)
[00:00:21.932,128] <inf> ble: ---- list length = 2 ----
[00:00:21.932,128] <dbg> ble: advertise_with_acceptlist: Acceptlist has 2 entries
[00:00:21.933,258] <dbg> ble: advertise_with_acceptlist: Advertising successfully started.
<<<<connect>>>>
[00:01:23.361,175] <dbg> ble: mtu_updated: Updated MTU: TX: 23 RX: 23 bytes
[00:01:23.364,074] <inf> ble: Connected via BLE
[00:01:23.364,685] <dbg> sc: commandHandler: Handling command: PairingModeSetState (26)
[00:01:23.970,733] <inf> ble: Security changed: 84:AB:1A:A1:0E:BF (public) level 2
[00:01:24.000,366] <wrn> bt_l2cap: Ignoring data for unknown channel ID 0x003a
[00:01:24.030,334] <dbg> ble: mtu_updated: Updated MTU: TX: 527 RX: 498 bytes
<<<<upload>>>>