C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk\examples>cd ..

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfjprog --program tools/dfu/bin/devi
ce_page_nrf52832_xxAA_s132_5.0.0.hex
Parsing hex file.
Reading flash area to program to guarantee it is erased.
Checking that the area to write is not protected.
Programing device.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfjprog --reset
Applying system reset.
Run.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfjprog --program bin/softdevice/s13
2_nrf52_5.0.0_softdevice.hex --chiperase
Parsing hex file.
Erasing user available code and UICR flash areas.
Applying system reset.
Checking that the area to write is not protected.
Programing device.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfjprog --program bin/bootloader/arm
cc/mesh_bootloader_armcc_nrf52832_xxAA.hex
Parsing hex file.
Reading flash area to program to guarantee it is erased.
Checking that the area to write is not protected.
Programing device.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfjprog --program tools/dfu/bin/devi
ce_page_nrf52832_xxAA_s132_5.0.0.hex
Parsing hex file.
Reading flash area to program to guarantee it is erased.
Checking that the area to write is not protected.
Programing device.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>--reset
'--reset' is not recognized as an internal or external command,
operable program or batch file.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfjprog --reset
Applying system reset.
Run.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfutil dfu serial -pkg dfu_test.zip
-p <COM port> -b 115200 -fc --mesh
The system cannot find the file specified.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfutil dfu serial -pkg dfu_test.zip
-p COM48 -b 115200 -fc --mesh
Upgrading target on COM48 with DFU package C:\Nordic\nRF5_SDK_15.0.0_a53641a\mes
h_sdk\dfu_test.zip. Flow control is enabled.
  [------------------------------------]    0%

Failed to upgrade target. Error is: Failed to establish connection

Possible causes:
- bootloader, SoftDevice or application on target does not match the requirement
s in the DFU package.
- baud rate or flow control is not the same as in the target bootloader.
- target is not in DFU mode. If using the SDK examples, press Button 4 and RESET
 and release both to enter DFU mode.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfutil dfu serial -pkg dfu_test.zip
-p COM48 -b 115200 -fc --mesh
Upgrading target on COM48 with DFU package C:\Nordic\nRF5_SDK_15.0.0_a53641a\mes
h_sdk\dfu_test.zip. Flow control is enabled.
  [------------------------------------]    0%

Failed to upgrade target. Error is: Serial port could not be opened on COM48. Re
ason: could not open port u'COM48': WindowsError(2, 'The system cannot find the
file specified.')

Possible causes:
- bootloader, SoftDevice or application on target does not match the requirement
s in the DFU package.
- baud rate or flow control is not the same as in the target bootloader.
- target is not in DFU mode. If using the SDK examples, press Button 4 and RESET
 and release both to enter DFU mode.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>nrfutil dfu serial -pkg dfu_test.zip
-p COM48 -b 115200 -fc --mesh
Upgrading target on COM48 with DFU package C:\Nordic\nRF5_SDK_15.0.0_a53641a\mes
h_sdk\dfu_test.zip. Flow control is enabled.
  [------------------------------------]    0%

Failed to upgrade target. Error is: Serial port could not be opened on COM48. Re
ason: could not open port u'COM48': WindowsError(2, 'The system cannot find the
file specified.')

Possible causes:
- bootloader, SoftDevice or application on target does not match the requirement
s in the DFU package.
- baud rate or flow control is not the same as in the target bootloader.
- target is not in DFU mode. If using the SDK examples, press Button 4 and RESET
 and release both to enter DFU mode.

C:\Nordic\nRF5_SDK_15.0.0_a53641a\mesh_sdk>