[00:00:00.493,316] wifi_nrf_bus: SPIM spi@4002f000: freq = 8 MHz [00:00:00.493,347] wifi_nrf_bus: SPIM spi@4002f000: latency = 0 [00:00:00.628,295] wifi_nrf: Management buffer offload enabled *** Booting nRF Connect SDK v2.9.1-60d0d6c8d42d *** *** Using Zephyr OS v3.7.99-ca954a6216c9 *** [00:00:00.758,972] net_config: Initializing network [00:00:00.759,002] net_config: Waiting interface 1 (0x200018c8) to be up... [00:00:00.759,185] net_config: IPv4 address: 192.168.1.99 [00:00:00.759,246] net_config: Running dhcpv4 client... [00:00:00.760,192] sta: Starting nrf52840dk with CPU frequency: 64 MHz [00:00:00.762,237] wifi_supplicant: wpa_supplicant initialized [00:00:01.760,375] sta: Static IP address (overridable): 192.168.1.99/255.255.255.0 -> 192.168.1.1 [00:00:03.447,082] wifi_mgmt_ext: Connection requested [00:00:03.447,998] sta: Connection requested [00:00:03.448,028] sta: ================== [00:00:03.448,059] sta: State: SCANNING [00:00:03.748,229] sta: ================== [00:00:03.748,260] sta: State: SCANNING [00:00:04.048,400] sta: ================== [00:00:04.048,431] sta: State: SCANNING [00:00:04.348,571] sta: ================== [00:00:04.348,602] sta: State: SCANNING [00:00:04.648,742] sta: ================== [00:00:04.648,773] sta: State: SCANNING [00:00:04.948,913] sta: ================== [00:00:04.948,944] sta: State: SCANNING [00:00:05.249,084] sta: ================== [00:00:05.249,114] sta: State: SCANNING [00:00:05.549,255] sta: ================== [00:00:05.549,285] sta: State: SCANNING [00:00:05.849,426] sta: ================== [00:00:05.849,456] sta: State: SCANNING [00:00:06.149,597] sta: ================== [00:00:06.149,627] sta: State: SCANNING [00:00:06.449,768] sta: ================== [00:00:06.449,798] sta: State: SCANNING [00:00:06.749,938] sta: ================== [00:00:06.749,969] sta: State: SCANNING [00:00:07.050,109] sta: ================== [00:00:07.050,140] sta: State: SCANNING [00:00:07.350,311] sta: ================== [00:00:07.350,341] sta: State: AUTHENTICATING [00:00:07.650,482] sta: ================== [00:00:07.650,512] sta: State: AUTHENTICATING [00:00:07.826,599] sta: Connected [00:00:07.959,411] sta: ================== [00:00:07.959,442] sta: State: COMPLETED [00:00:07.959,472] sta: Interface Mode: STATION [00:00:07.959,503] sta: Link Mode: WIFI 4 (802.11n/HT) [00:00:07.959,533] sta: SSID: eSmartGuest [00:00:07.959,594] sta: BSSID: *********** [00:00:07.959,594] sta: Band: 2.4GHz [00:00:07.959,625] sta: Channel: 1 [00:00:07.959,655] sta: Security: WPA2-PSK [00:00:07.959,655] sta: MFP: Optional [00:00:07.959,686] sta: RSSI: -45 [00:00:07.959,686] sta: Try to open as client [00:00:08.768,493] net_dhcpv4: Received: 192.168.101.143 [00:00:08.768,737] net_config: IPv4 address: 192.168.101.143 [00:00:08.768,737] net_config: Lease time: 86400 seconds [00:00:08.768,798] net_config: Subnet: 255.255.255.0 [00:00:08.768,829] net_config: Router: 192.168.101.1 [00:00:08.768,981] sta: DHCP IP address: 192.168.101.143 [00:00:10.592,864] sta: Cannot connect to IPv4 remote (-116) [00:00:10.592,864] sta: Cannot create HTTP connection. [00:00:14.266,448] sta: Cannot connect to IPv4 remote (-116) [00:00:14.266,448] sta: Cannot create HTTP connection. [00:00:17.570,404] sta: Cannot connect to 192.168.101.98:3001 (err -113) [00:00:17.570,434] sta: No IPv4 connectivity [00:00:17.593,536] wifi_suppli�