* Executing task: nRF Connect: Build: Code/Code (active) Building Code C:\Windows\system32\cmd.exe /d /s /c "west build --build-dir c:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build --domain Code" -- west build: building domain(s): Code [0/1] Re-running CMake... Loading Zephyr default modules (Zephyr base (cached)). -- Application: C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code -- CMake version: 3.21.0 -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf54l15dk, qualifiers: nrf54l10/cpuapp -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found BOARD.dts: C:/ncs/v2.9.0/zephyr/boards/nordic/nrf54l15dk/nrf54l15dk_nrf54l10_cpuapp.dts -- Found devicetree overlay: C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/nrf54l15dk_nrf54l10_cpuapp.overlay unit address and first address in 'reg' (0x5004c000) don't match for /soc/peripheral@50000000/vpr@4c000/mailbox@1 -- Generated zephyr.dts: C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/dts.cmake Parsing C:/ncs/v2.9.0/zephyr/Kconfig Loaded configuration 'C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/.config' Merged configuration 'C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/.config.sysbuild' No change to configuration in 'C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/.config' No change to Kconfig header in 'C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/include/generated/zephyr/autoconf.h' =========== Generating psa_crypto_config =============== Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Backup: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False Backup: CONFIG_MBEDTLS_THREADING: False Backup: CONFIG_MBEDTLS_THREADING_ALT: True =========== Checkpoint: backup =============== Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Restore: CONFIG_MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT: False Restore: CONFIG_MBEDTLS_THREADING: False Restore: CONFIG_MBEDTLS_THREADING_ALT: True =========== End psa_crypto_config =============== =========== Generating psa_crypto_library_config =============== Backup: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Backup: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Backup: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Backup: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True Backup: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False Backup: CONFIG_MBEDTLS_THREADING: False Backup: CONFIG_MBEDTLS_THREADING_ALT: True =========== Checkpoint: backup =============== Restore: CONFIG_MBEDTLS_PSA_CRYPTO_C: True Restore: CONFIG_MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER: False Restore: CONFIG_MBEDTLS_PSA_CRYPTO_SPM: False Restore: CONFIG_MBEDTLS_USE_PSA_CRYPTO: True Restore: CONFIG_MBEDTLS_PLATFORM_PRINTF_ALT: False Restore: CONFIG_MBEDTLS_THREADING: False Restore: CONFIG_MBEDTLS_THREADING_ALT: True =========== End psa_crypto_library_config =============== -- Including signing script: C:/ncs/v2.9.0/nrf/cmake/sysbuild/image_signing.cmake -- Configuring done -- Generating done -- Build files have been written to: C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code [51/191] Building C object zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj FAILED: zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj C:\ncs\toolchains\b620d30767\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -DDEVELOP_IN_NRF54L15 -DKERNEL -DK_HEAP_MEM_POOL_SIZE=0 -DMBEDTLS_CONFIG_FILE=\"nrf-config.h\" -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE=\"nrf-psa-crypto-config.h\" -DMBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE=\"nrf-psa-crypto-user-config.h\" -DNRF54L10_XXAA -DNRF_APPLICATION -DNRF_CONFIG_CPU_FREQ_MHZ=128 -DPICOLIBC_DOUBLE_PRINTF_SCANF -DUSE_PARTITION_MANAGER=1 -D__LINUX_ERRNO_EXTENSIONS__ -D__PROGRAM_START -D__ZEPHYR_SUPERVISOR__ -D__ZEPHYR__=1 -IC:/ncs/v2.9.0/nrf/drivers/mpsl/clock_control -IC:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/include/generated/zephyr -IC:/ncs/v2.9.0/zephyr/include -IC:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/include/generated -IC:/ncs/v2.9.0/zephyr/soc/nordic -IC:/ncs/v2.9.0/zephyr/soc/nordic/nrf54l/. -IC:/ncs/v2.9.0/zephyr/soc/nordic/common/. -IC:/ncs/v2.9.0/zephyr/subsys/mgmt/mcumgr/util/include -IC:/ncs/v2.9.0/bootloader/mcuboot/boot/bootutil/include -IC:/ncs/v2.9.0/zephyr/subsys/mgmt/mcumgr/transport/include -IC:/ncs/v2.9.0/zephyr/subsys/bluetooth -IC:/ncs/v2.9.0/zephyr/subsys/settings/include -IC:/ncs/v2.9.0/nrf/include -IC:/ncs/v2.9.0/nrf/lib/multithreading_lock/. -IC:/ncs/v2.9.0/nrf/subsys/bluetooth/controller/. -IC:/ncs/v2.9.0/zephyr/drivers/flash -IC:/ncs/v2.9.0/nrf/tests/include -IC:/ncs/v2.9.0/modules/hal/cmsis/CMSIS/Core/Include -IC:/ncs/v2.9.0/zephyr/modules/cmsis/. -IC:/ncs/v2.9.0/modules/hal/nordic/nrfx -IC:/ncs/v2.9.0/modules/hal/nordic/nrfx/drivers/include -IC:/ncs/v2.9.0/modules/hal/nordic/nrfx/mdk -IC:/ncs/v2.9.0/zephyr/modules/hal_nordic/nrfx/. -IC:/ncs/v2.9.0/modules/crypto/tinycrypt/lib/include -IC:/ncs/v2.9.0/modules/lib/zcbor/include -IC:/ncs/v2.9.0/nrfxlib/softdevice_controller/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/common/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/nrf21540_gpio/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/nrf21540_gpio_spi/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/nrf2220/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/nrf2240/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/nrf22xx/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/simple_gpio/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/fem/include/protocol -IC:/ncs/v2.9.0/nrfxlib/mpsl/include -IC:/ncs/v2.9.0/nrfxlib/mpsl/include/protocol -IC:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/generated/library_nrf_security_psa -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/include -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/threading/include -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/utils -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/drivers/cracen/common/include -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/drivers/cracen/sxsymcrypt/include -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/drivers/cracen/silexpk/target/baremetal_ba414e_with_ik -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/drivers/cracen/silexpk/include -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/drivers/cracen/sicrypto/include -IC:/ncs/v2.9.0/nrf/subsys/nrf_security/src/drivers/cracen/cracenpsa/include -IC:/ncs/v2.9.0/modules/crypto/oberon-psa-crypto/include -IC:/ncs/v2.9.0/modules/crypto/oberon-psa-crypto/library -IC:/ncs/v2.9.0/modules/crypto/mbedtls/library -IC:/ncs/v2.9.0/modules/crypto/mbedtls/include -IC:/ncs/v2.9.0/modules/crypto/mbedtls/include/library -IC:/ncs/v2.9.0/nrfxlib/crypto/nrf_oberon/include -isystem C:/ncs/v2.9.0/zephyr/lib/libc/common/include -Os -DNDEBUG -Wshadow -fno-strict-aliasing -Os -imacros C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code/zephyr/include/generated/zephyr/autoconf.h -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfpu=fpv5-sp-d16 -mfloat-abi=hard -mfp16-format=ieee -mtp=soft --sysroot=C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi -imacros C:/ncs/v2.9.0/zephyr/include/zephyr/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wdouble-promotion -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-unused-but-set-variable -Werror=implicit-int -fno-pic -fno-pie -fno-asynchronous-unwind-tables -ftls-model=local-exec -fno-reorder-functions --param=min-pagesize=0 -fno-defer-pop -fmacro-prefix-map=C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/ncs/v2.9.0/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/ncs/v2.9.0=WEST_TOPDIR -ffunction-sections -fdata-sections -specs=picolibc.specs -std=c99 -MD -MT zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj -MF zephyr\drivers\i2c\CMakeFiles\drivers__i2c.dir\i2c_nrfx_twim.c.obj.d -o zephyr/drivers/i2c/CMakeFiles/drivers__i2c.dir/i2c_nrfx_twim.c.obj -c C:/ncs/v2.9.0/zephyr/drivers/i2c/i2c_nrfx_twim.c In file included from C:/ncs/v2.9.0/zephyr/include/zephyr/toolchain.h:50, from C:/ncs/v2.9.0/zephyr/include/zephyr/sys/__assert.h:11, from C:/ncs/v2.9.0/zephyr/include/zephyr/irq_multilevel.h:15, from C:/ncs/v2.9.0/zephyr/include/zephyr/devicetree.h:20, from C:/ncs/v2.9.0/zephyr/include/zephyr/device.h:12, from C:/ncs/v2.9.0/zephyr/include/zephyr/drivers/i2c.h:27, from C:/ncs/v2.9.0/zephyr/drivers/i2c/i2c_nrfx_twim.c:7: C:/ncs/v2.9.0/zephyr/include/zephyr/toolchain/gcc.h:87:36: error: static assertion failed: "/soc/peripheral@50000000/i2c@c7000 defined without sleep state" 87 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert((EXPR), "" MSG) | ^~~~~~~~~~~~~~ c:\ncs\v2.9.0\zephyr\soc\nordic\common\soc_nrf_common.h:235:9: note: in expansion of macro 'BUILD_ASSERT' 235 | BUILD_ASSERT(!IS_ENABLED(CONFIG_PM_DEVICE) || \ | ^~~~~~~~~~~~ C:/ncs/v2.9.0/zephyr/drivers/i2c/i2c_nrfx_twim.c:230:9: note: in expansion of macro 'NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP' 230 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(I2C(idx)); \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ C:/ncs/v2.9.0/zephyr/drivers/i2c/i2c_nrfx_twim.c:298:1: note: in expansion of macro 'I2C_NRFX_TWIM_DEVICE' 298 | I2C_NRFX_TWIM_DEVICE(21); | ^~~~~~~~~~~~~~~~~~~~ [56/191] Building C object zephyr/drivers/serial/CMakeFiles/drivers__serial.dir/uart_nrfx_uarte.c.obj ninja: build stopped: subcommand failed. FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\b620d30767\opt\bin\cmake.EXE' --build C:/Payal/Project/Gas_meter/gas_meter_base_fw/Code_1/Code/build/Code * The terminal process terminated with exit code: 1. * Terminal will be reused by tasks, press any key to close it.