I: nRF5 802154 radio initialized
*** Booting nRF Connect SDK v2.5.2 ***
I: Starting ZBOSS Coordinator example
I: ZBOSS Coordinator example started


uart:~$ E: Zigbee shell endpoint: 1 is not registered.
I: Production configuration is not present or invalid (status: -1)
I: Zigbee stack initialized
I: Device started for the first time
I: Start network formation
I: Unimplemented signal (signal: 54, status: 0)
I: Network formed successfully, start network steering (Extended PAN ID: f4ce365044756cb7, PAN ID: 0xb435)
I: Unimplemented signal (signal: 54, status: 0)
I: Allow pre-Zigbee 3.0 devices to join the network
I: Network steering started

  bdb                clear              device             devmem
  flash              help               history            kernel
  nbr                nrf_clock_control  resize             retval
  sensor             shell              version            zcl
  zdo
uart:~$ bdb role set zc
role: wrong parameter count
role - Set/get role.
Subcommands:
  zc   :Set Coordinator role.
  zed  :Set End Device role.
  zr   :Set Router role.
uart:~$ bdb role
zc
Done
uart:~$ bdb start
Done
uart:~$ I: Unimplemented signal (signal: 54, status: 0)
I: Allow pre-Zigbee 3.0 devices to join the network
I: Network steering started
I: Network steering finished
I: Unimplemented signal (signal: 54, status: 0)
I: Network steering finished
I: nRF5 802154 radio initialized
*** Booting nRF Connect SDK v2.5.2 ***
I: Starting ZBOSS Coordinator example
I: ZBOSS Coordinator example started


uart:~$ E: Zigbee shell endpoint: 1 is not registered.
I: Production configuration is not present or invalid (status: -1)
I: Zigbee stack initialized
I: Device started for the first time
I: Start network formation
I: Unimplemented signal (signal: 54, status: 0)
I: Network formed successfully, start network steering (Extended PAN ID: f4ce365044756cb7, PAN ID: 0x7a66)
I: Unimplemented signal (signal: 54, status: 0)
I: Allow pre-Zigbee 3.0 devices to join the network
I: Network steering started
bdb start
Done
uart:~$ I: Unimplemented signal (signal: 54, status: 0)
I: Allow pre-Zigbee 3.0 devices to join the network
I: Network steering started
bdb roI: Device update received (short: 0x9153, long: f4ce369e3f3451ab, status: 1)
lI: New device commissioned or rejoined (short: 0x9153)
I: Joining period extended.
eI: Device authorization event received (short: 0x9153, long: f4ce369e3f3451ab, authorization type: 1, authorization status: 0)
I: Unimplemented signal (signal: 54, status: 0)

  bdb                clear              device             devmem
  flash              help               history            kernel
  nbr                nrf_clock_control  resize             retval
  sensor             shell              version            zcl
  zdo
uart:~$ zdo match_desc 0xfffd 0xfffd 0x0104 1 0 0
Sending broadcast request.

src_addr=9153 ep=1
uart:~$ zdo ieee_addr 9153
f4ce369e3f3451ab
Done
uart:~$ zdo eui64
f4ce365044756cb7
Done
uart:~$ zdo mgmt_bind 9153
[idx] src_address      src_endp cluster_id dst_addr_mode dst_addr         dst_endp
Total entries for the binding table: 0
Done
Done
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 2 0 3 0
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 2 0 3I: Network steering finished
zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 I: Network steering finished
I: Unimplemented signal (signal: 54, status: 0)
zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 0x0000 9153
Done
uart:~$ zdo mgmt_bind 9153
[idx] src_address      src_endp cluster_id dst_addr_mode dst_addr         dst_endp
[  0] f4ce369e3f3451ab        1       0000           003 f4ce365044756cb7      010
Total entries for the binding table: 1
Done
uart:~$ zcl attr read 9153 1 0x0000 0x0104 0
Error: Request timed out
uart:~$ zdo match_desc 0xfffd 0xfffd 0x0104 1 0 0
Sending broadcast request.

src_addr=9153 ep=1
Done
uart:~$ zcl attr read 9153 1 0x0000 0x0104 0x00 0x21 0x0F
read: wrong parameter count
read - Send Read Attribute Zigbee command.
       Usage: read <h:dst_addr> <d:ep> <h:cluster> [-c] <h:profile> <h:attr_id>
       -c switches the server-to-client direction.
       h: is for hex, d: is for decimal.
uart:~$ zcl attr write 9153 1 0x0000 0x0104 0x00 0x21 0x0F
Error: Request timed out
uart:~$ I: Enter identify mode
zdo nwk_addr f4ce365044756cb7
Error: Network address request timed out
uart:~$ zdo match_desc 0xfffd 0xfffd 0x0104 1 0 0
Sending broadcast request.

src_addr=9153 ep=1
Done
uart:~$ zdo match_desc 0xfffd 0xfffd 0x0104 1 0 0I: Find and bind target finished (status: 0)
zdo simple_desc_req 9153 1
Sending broadcast request.

src_addr=9153 ep=1
uart:~$ zdo simple_desc_req 0x9153 1
src_addr=0x9153 ep=1 profile_id=0x0104 app_dev_id=0x104 app_dev_ver=0x0 in_clusters=0x0000,0x0003 out_clusters=0x0003,0x0005,0x0004,0x0006,0x0008 
Done
Done
uart:~$ zdo cmd f4ce369e3f3451ab 1 0x0008 -p 0x0104 0x00 -l 0affff
zdo - ZDO manipulation.
Subcommands:
  active_ep        :Send active endpoint request.
                    Usage: active_ep <h:16-bit destination_address>
  simple_desc_req  :Send simple descriptor request.
                    Usage: simple_desc_req <h:16-bit destination_address>
                    <d:endpoint>
  match_desc       :Send match descriptor request.
                    Usage: match_desc <h:16-bit destination_address>
                    <h:requested address/type> <h:profile ID> <d:number of input
                    clusters> [<h:input cluster IDs> ...] <d:number of output
                    clusters> [<h:output cluster IDs> ...] [-t | --timeout
                    d:number of seconds to wait for answers]
  nwk_addr         :Resolve EUI64 address to short network address.
                    Usage: nwk_addr <h:EUI64>
  ieee_addr        :Resolve network short address to EUI64 address.
                    Usage: ieee_addr <h:short_addr>
  eui64            :Get/set the eui64 address of the node.
                    Usage: eui64 [<h:eui64>]
  short            :Get the short address of the node.
  bind             :Create/remove the binding entry in the remote node.
  mgmt_bind        :Get binding table (see spec. 2.4.3.3.4)
                    Usage: <h:short> [d:start_index]
  mgmt_leave       :Perform mgmt_leave_req (see spec. 2.4.3.3.5)
                    Usage: mgmt_leave <h:16-bit dst_addr> [h:device_address
                    eui64] [--children] [--rejoin]
                    --children - Device should also remove its children when
                    leaving.
                    --rejoin - Device should rejoin network after leave.
  mgmt_lqi         :Perform mgmt_lqi request.
                    Usage: mgmt_lqi <h:short> [d:start index]
uart:~$ zdo
zdo - ZDO manipulation.
Subcommands:
  active_ep        :Send active endpoint request.
                    Usage: active_ep <h:16-bit destination_address>
  simple_desc_req  :Send simple descriptor request.
                    Usage: simple_desc_req <h:16-bit destination_address>
                    <d:endpoint>
  match_desc       :Send match descriptor request.
                    Usage: match_desc <h:16-bit destination_address>
                    <h:requested address/type> <h:profile ID> <d:number of input
                    clusters> [<h:input cluster IDs> ...] <d:number of output
                    clusters> [<h:output cluster IDs> ...] [-t | --timeout
                    d:number of seconds to wait for answers]
  nwk_addr         :Resolve EUI64 address to short network address.
                    Usage: nwk_addr <h:EUI64>
  ieee_addr        :Resolve network short address to EUI64 address.
                    Usage: ieee_addr <h:short_addr>
  eui64            :Get/set the eui64 address of the node.
                    Usage: eui64 [<h:eui64>]
  short            :Get the short address of the node.
  bind             :Create/remove the binding entry in the remote node.
  mgmt_bind        :Get binding table (see spec. 2.4.3.3.4)
                    Usage: <h:short> [d:start_index]
  mgmt_leave       :Perform mgmt_leave_req (see spec. 2.4.3.3.5)
                    Usage: mgmt_leave <h:16-bit dst_addr> [h:device_address
                    eui64] [--children] [--rejoin]
                    --children - Device should also remove its children when
                    leaving.
                    --rejoin - Device should rejoin network after leave.
  mgmt_lqi         :Perform mgmt_lqi request.
                    Usage: mgmt_lqi <h:short> [d:start index]
uart:~$ zdo active_ep 0x9153
src_addr=9153 ep=1 
Done
uart:~$ zcl cmd f4ce369e3f3451ab 1 0x0008 -p 0x0104 0x00 -l 0affff
Error: Request timed out
uart:~$ zdo ping f4ce369e3f3451ab 30
zdo - ZDO manipulation.
Subcommands:
  active_ep        :Send active endpoint request.
                    Usage: active_ep <h:16-bit destination_address>
  simple_desc_req  :Send simple descriptor request.
                    Usage: simple_desc_req <h:16-bit destination_address>
                    <d:endpoint>
  match_desc       :Send match descriptor request.
                    Usage: match_desc <h:16-bit destination_address>
                    <h:requested address/type> <h:profile ID> <d:number of input
                    clusters> [<h:input cluster IDs> ...] <d:number of output
                    clusters> [<h:output cluster IDs> ...] [-t | --timeout
                    d:number of seconds to wait for answers]
  nwk_addr         :Resolve EUI64 address to short network address.
                    Usage: nwk_addr <h:EUI64>
  ieee_addr        :Resolve network short address to EUI64 address.
                    Usage: ieee_addr <h:short_addr>
  eui64            :Get/set the eui64 address of the node.
                    Usage: eui64 [<h:eui64>]
  short            :Get the short address of the node.
  bind             :Create/remove the binding entry in the remote node.
  mgmt_bind        :Get binding table (see spec. 2.4.3.3.4)
                    Usage: <h:short> [d:start_index]
  mgmt_leave       :Perform mgmt_leave_req (see spec. 2.4.3.3.5)
                    Usage: mgmt_leave <h:16-bit dst_addr> [h:device_address
                    eui64] [--children] [--rejoin]
                    --children - Device should also remove its children when
                    leaving.
                    --rejoin - Device should rejoin network after leave.
  mgmt_lqi         :Perform mgmt_lqi request.
                    Usage: mgmt_lqi <h:short> [d:start index]
uart:~$ zcl ping f4ce369e3f3451ab 30
Error: Request timed out after 9900 ms.
uart:~$ zdo mgmt_bind 9153
[idx] src_address      src_endp cluster_id dst_addr_mode dst_addr         dst_endp
[  0] f4ce369e3f3451ab        1       0000           003 f4ce365044756cb7      010
Total entries for the binding table: 1
Done
uart:~$ zdo cmd f4ce369e3f3451ab 1 0x0008 -p 0x0104 0x00 -l 0affff
zdo - ZDO manipulation.
Subcommands:
  active_ep        :Send active endpoint request.
                    Usage: active_ep <h:16-bit destination_address>
  simple_desc_req  :Send simple descriptor request.
                    Usage: simple_desc_req <h:16-bit destination_address>
                    <d:endpoint>
  match_desc       :Send match descriptor request.
                    Usage: match_desc <h:16-bit destination_address>
                    <h:requested address/type> <h:profile ID> <d:number of input
                    clusters> [<h:input cluster IDs> ...] <d:number of output
                    clusters> [<h:output cluster IDs> ...] [-t | --timeout
                    d:number of seconds to wait for answers]
  nwk_addr         :Resolve EUI64 address to short network address.
                    Usage: nwk_addr <h:EUI64>
  ieee_addr        :Resolve network short address to EUI64 address.
                    Usage: ieee_addr <h:short_addr>
  eui64            :Get/set the eui64 address of the node.
                    Usage: eui64 [<h:eui64>]
  short            :Get the short address of the node.
  bind             :Create/remove the binding entry in the remote node.
  mgmt_bind        :Get binding table (see spec. 2.4.3.3.4)
                    Usage: <h:short> [d:start_index]
  mgmt_leave       :Perform mgmt_leave_req (see spec. 2.4.3.3.5)
                    Usage: mgmt_leave <h:16-bit dst_addr> [h:device_address
                    eui64] [--children] [--rejoin]
                    --children - Device should also remove its children when
                    leaving.
                    --rejoin - Device should rejoin network after leave.
  mgmt_lqi         :Perform mgmt_lqi request.
                    Usage: mgmt_lqi <h:short> [d:start index]
uart:~$ zcl cmd f4ce369e3f3451ab 1 0x0008 -p 0x0104 0x00 -l 0affff
Error: Request timed out
uart:~$ zdo simple_desc_req 0x9153 10
Error: Simple descriptor request failed
uart:~$ zdo simple_desc_req 0x9153 1
src_addr=0x9153 ep=1 profile_id=0x0104 app_dev_id=0x104 app_dev_ver=0x0 in_clusters=0x0000,0x0003 out_clusters=0x0003,0x0005,0x0004,0x0006,0x0008 
Done
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 3 
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 3 0
Error: Incorrect destination network address for the request
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 2 3 0
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 2 0 3 0
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 2 0 3 0
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 3 0 0
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 3 0 
Error: Incorrect destination network address for the request
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 3
on: wrong parameter count
on - Create bind entry.
     Usage: on <h:source_eui64> <d:source_ep> <h:destination_addr>
     <d:destination_ep> <h:source_cluster_id> <h:request_dst_addr>
uart:~$ zdo bind on f4ce369e3f3451ab 1 f4ce365044756cb7 10 0x0003 9153
Done
uart:~$ zdo mgmt_bind 9153
[idx] src_address      src_endp cluster_id dst_addr_mode dst_addr         dst_endp
[  0] f4ce369e3f3451ab        1       0000           003 f4ce365044756cb7      010
[  1] f4ce369e3f3451ab        1     0x0003           003 f4ce365044756cb7      010
Total entries for the binding table: 2
Done
uart:~$ zcl attr read 9153 1 0x0003 0x0104 0
Error: Request timed out
uart:~$ zcl attr write 9153 1 0x0003 0x0104 0x00 0x21 0x0F
Error: Request timed out
uart:~$ 
uart:~$ 
uart:~$