*  Executing task: nRF Connect: Generate config nrf52840dongle/nrf52840 for c:\ncs\bumble\hci_uart_0805-2 

Building hci_uart_0805-2
C:\Windows\system32\cmd.exe /d /s /c "west build --build-dir c:/ncs/bumble/hci_uart_0805-2/build c:/ncs/bumble/hci_uart_0805-2 --pristine --board nrf52840dongle/nrf52840 -- -DBOARD_ROOT=c:/ncs/bumble/hci_uart_0805-2"

-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter 
-- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf52840dongle, qualifiers: nrf52840
Parsing C:/ncs/v3.0.2/zephyr/share/sysbuild/Kconfig
Loaded configuration 'C:/ncs/bumble/hci_uart_0805-2/build/_sysbuild/empty.conf'
Merged configuration 'C:/ncs/bumble/hci_uart_0805-2/build/_sysbuild/empty.conf'
Configuration saved to 'C:/ncs/bumble/hci_uart_0805-2/build/zephyr/.config'
Kconfig header saved to 'C:/ncs/bumble/hci_uart_0805-2/build/_sysbuild/autoconf.h'
-- 
   *************************************
   * Running CMake for hci_uart_0805-2 *
   *************************************

Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/bumble/hci_uart_0805-2
-- CMake version: 3.21.0
-- Found Python3: C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.10") found components: Interpreter 
-- Cache files will be written to: C:/ncs/v3.0.2/zephyr/.cache
-- Zephyr version: 4.0.99 (C:/ncs/v3.0.2/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: nrf52840dongle, qualifiers: nrf52840
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/0b393f9e1b/opt/zephyr-sdk)
-- Found Dtc: C:/ncs/toolchains/0b393f9e1b/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") 
-- Found BOARD.dts: C:/ncs/v3.0.2/zephyr/boards/nordic/nrf52840dongle/nrf52840dongle_nrf52840.dts
-- Generated zephyr.dts: C:/ncs/bumble/hci_uart_0805-2/build/hci_uart_0805-2/zephyr/zephyr.dts
-- Generated pickled edt: C:/ncs/bumble/hci_uart_0805-2/build/hci_uart_0805-2/zephyr/edt.pickle
-- Generated zephyr.dts: C:/ncs/bumble/hci_uart_0805-2/build/hci_uart_0805-2/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/ncs/bumble/hci_uart_0805-2/build/hci_uart_0805-2/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: C:/ncs/bumble/hci_uart_0805-2/build/hci_uart_0805-2/zephyr/dts.cmake

warning: MPSL_TRIGGER_IPC_TASK_ON_RTC_START (defined at
C:/ncs/v3.0.2/nrf\subsys\mpsl\init/Kconfig:50) was assigned the value 'y' but got the value 'n'.
Check these unsatisfied dependencies: SOC_NRF5340_CPUNET (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MPSL_TRIGGER_IPC_TASK_ON_RTC_START and/or
look up MPSL_TRIGGER_IPC_TASK_ON_RTC_START in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.


warning: MPSL_TRIGGER_IPC_TASK_ON_RTC_START_CHANNEL (defined at
C:/ncs/v3.0.2/nrf\subsys\mpsl\init/Kconfig:59) was assigned the value '4' but got the value ''.
Check these unsatisfied dependencies: MPSL_TRIGGER_IPC_TASK_ON_RTC_START (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_MPSL_TRIGGER_IPC_TASK_ON_RTC_START_CHANNEL
and/or look up MPSL_TRIGGER_IPC_TASK_ON_RTC_START_CHANNEL in the menuconfig/guiconfig interface. The
Application Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices
sections of the manual might be helpful too.


warning: BT_CTLR_DTM_HCI (defined at subsys/bluetooth\controller\Kconfig.dtm:14) was assigned the
value 'y' but got the value 'n'. Check these unsatisfied dependencies: BT_CTLR_DTM_HCI_SUPPORT (=n).
See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_BT_CTLR_DTM_HCI and/or look up
BT_CTLR_DTM_HCI in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


Parsing C:/ncs/v3.0.2/zephyr/Kconfig
Loaded configuration 'C:/ncs/v3.0.2/zephyr/boards/nordic/nrf52840dongle/nrf52840dongle_nrf52840_defconfig'
Merged configuration 'C:/ncs/bumble/hci_uart_0805-2/prj.conf'
Merged configuration 'C:/ncs/bumble/hci_uart_0805-2/boards/nrf52840dongle_nrf52840.conf'
Merged configuration 'C:/ncs/bumble/hci_uart_0805-2/build/hci_uart_0805-2/zephyr/.config.sysbuild'
C:/ncs/bumble/hci_uart_0805-2/prj.conf:66: warning: attempt to assign the value 'y' to the undefined symbol IPC_RADIO_BT

C:/ncs/bumble/hci_uart_0805-2/prj.conf:67: warning: attempt to assign the value 'y' to the undefined symbol IPC_RADIO_BT_HCI_IPC

error: Aborting due to Kconfig warnings

CMake Error at C:/ncs/v3.0.2/zephyr/cmake/modules/kconfig.cmake:396 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  C:/ncs/v3.0.2/nrf/cmake/modules/kconfig.cmake:36 (include)
  C:/ncs/v3.0.2/zephyr/cmake/modules/zephyr_default.cmake:133 (include)
  C:/ncs/v3.0.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  C:/ncs/v3.0.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:5 (find_package)


-- Configuring incomplete, errors occurred!
CMake Error at cmake/modules/sysbuild_extensions.cmake:514 (message):
  CMake configure failed for Zephyr project: hci_uart_0805-2

  Location: C:/ncs/bumble/hci_uart_0805-2
Call Stack (most recent call first):
  cmake/modules/sysbuild_images.cmake:43 (ExternalZephyrProject_Cmake)
  cmake/modules/sysbuild_default.cmake:21 (include)
  C:/ncs/v3.0.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  C:/ncs/v3.0.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  C:/ncs/v3.0.2/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
  template/CMakeLists.txt:10 (find_package)


-- Configuring incomplete, errors occurred!
See also "C:/ncs/bumble/hci_uart_0805-2/build/CMakeFiles/CMakeOutput.log".
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\0b393f9e1b\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/0b393f9e1b/opt/bin/python.exe '-Bc:\ncs\bumble\hci_uart_0805-2\build' -GNinja -DBOARD=nrf52840dongle/nrf52840 -DBOARD_ROOT=c:/ncs/bumble/hci_uart_0805-2 '-SC:\ncs\v3.0.2\zephyr\share\sysbuild' '-DAPP_DIR:PATH=c:\ncs\bumble\hci_uart_0805-2'

 *  The terminal process terminated with exit code: 1. 
 *  Terminal will be reused by tasks, press any key to close it.