Inside main
Writing settings...
Flash erase success
In settings_write dst = 000ff000
-----nrf_fstorage_write called------
Flash write success
ACTIVATION NONE = 1
Initializing transports (found: 1)
Enter main loop
<info> app: Inside main
<debug> app: In nrf_bootloader_init
<debug> nrf_dfu_settings: Calling nrf_dfu_settings_init()...
<debug> nrf_dfu_flash: Initializing nrf_fstorage_nvmc backend.
<warning> nrf_dfu_settings: Resetting bootloader settings since neither the settings page nor the backup are valid (CRC error).
<debug> app: Enter nrf_bootloader_fw_activate
<info> app: No firmware to activate.
<debug> app: Enter nrf_dfu_app_is_valid
<debug> app: No valid app to boot.
<debug> app: DFU mode because app is not valid.
<info> nrf_bootloader_wdt: WDT is not enabled
<debug> app: in weak nrf_dfu_init_user
<debug> app: timer_stop (0x20000024)
<debug> app: timer_activate (0x20000024)
<info> app: Entering DFU mode.
<debug> app: Initializing transports (found: 1)
<debug> nrf_dfu_serial_uart: serial_dfu_transport_init()
<debug> nrf_dfu_serial_uart: serial_dfu_transport_init() completed
<debug> nrf_dfu_flash: Initializing nrf_fstorage_nvmc backend.
<debug> app: Shutting down transports (found: 1)
<debug> nrf_dfu_serial: Received ping 1
<info> nrf_dfu_serial_uart: Allocated buffer 2000378C
<debug> nrf_dfu_req_handler: Handle NRF_DFU_OP_PING
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
<debug> nrf_dfu_serial: Sending Response: [0x9, 0x1]
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 2000378C
<debug> nrf_dfu_req_handler: Handle NRF_DFU_OP_OBJECT_CREATE (command)
<debug> app: timer_stop (0x20000024)
<debug> app: timer_activate (0x20000024)
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
<debug> nrf_dfu_serial: Sending Response: [0x1, 0x1]
Handle NRF_DFU_OP_OBJECT_WRITE (command)
nrf_dfu_validation_init_cmd_append ---->ret_val = 1
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 20003810
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
Handle NRF_DFU_OP_OBJECT_WRITE (command)
nrf_dfu_validation_init_cmd_append ---->ret_val = 1
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 2000378C
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
Handle NRF_DFU_OP_OBJECT_WRITE (command)
nrf_dfu_validation_init_cmd_append ---->ret_val = 1
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 20003810
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 20003810
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
<debug> nrf_dfu_req_handler: Handle NRF_DFU_OP_CRC_GET (command)
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
<debug> nrf_dfu_serial: Sending Response: [0x3, 0x1]
Size of Binary = 25012
Address where to flash binary = 20003774
m_firmware_start_addr = 00026000
Writing settings...
Flash erase success
In settings_write dst = 000ff000
-----nrf_fstorage_write called------
Flash write success
Writing settings...
Flash erase success
In settings_write dst = 000fe000
-----nrf_fstorage_write called------
Flash write success
Writing valid init command to flash.
Flash erase success
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 20003810
<debug> nrf_dfu_req_handler: Handle NRF_DFU_OP_OBJECT_EXECUTE (command)
<debug> nrf_dfu_validation: PB: Init packet data len: 64
<info> nrf_dfu_validation: Signature required. Checking signature.
<info> nrf_dfu_validation: Calculating init packet hash (init packet len: 64)
<info> nrf_dfu_validation: Verify signature
<info> nrf_dfu_validation: Image verified
<debug> app: Enter nrf_dfu_cache_prepare()
<debug> app: required_size: 0x61B4.
<debug> app: single_bank: false.
<debug> app: keep_app: false.
<debug> app: keep_softdevice: true.
<debug> app: SD_PRESENT: true.
<debug> app: Bank contents:
<debug> app: Bank 0 code: 0x00: Size: 0x0
<debug> app: Bank 1 code: 0x00: Size: 0x0
<debug> app: pass: 0.
<debug> app: cache_address: 0x26000.
<debug> app: cache_too_small: false.
<debug> app: keep_firmware: false.
<debug> app: delete_more: false.
<debug> nrf_dfu_validation: Write address set to 0x00026000
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 20003810
<info> nrf_dfu_settings: Backing up settings page to address 0xFE000.
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
<debug> nrf_dfu_serial: Sending Response: [0x4, 0x1]
<debug> nrf_dfu_req_handler: Handle NRF_DFU_OP_OBJECT_CREATE (data)
<debug> nrf_dfu_req_handler: Creating object with size: 4096. Offset: 0x00000000, CRC: 0x00000000
<debug> nrf_dfu_req_handler: Request handling complete. Result: 0x1
<debug> nrf_dfu_serial: Sending Response: [0x1, 0x1]
Handle NRF_DFU_OP_OBJECT_WRITE (data)

 WRITE_ADDR = 155648 s_dfu_settings.write_offset = 0

-----nrf_fstorage_write called------
----> 142 - E:\projects\ADI_MUSKA\nRF5_SDK_15.2.0_9412b96\components\libraries\fstorage\nrf_fstorage.c
<debug> app: Shutting down transports (found: 1)
<info> nrf_dfu_serial_uart: Allocated buffer 2000378C
<debug> nrf_dfu_req_handler: Handle NRF_DFU_OP_OBJECT_WRITE (data)
<error> app: Received a fault! id: 0x00004002, pc: 0x00000000, info: 0x2003FF50