Usage of Cellular Monitor with non Zephyr OS

RE: Usage of Cellular Monitor with non Zephyr OS

Didrik Rokhaug — Mon, 19 Jun 2023 07:58:39 GMT

[quote user=""]Are the displayed information field "LTE Network", "Device", "SIM" etc. sourced from the actual modem trace?[/quote]

The developers confirm that the information is taken from the modem trace.

RE: Usage of Cellular Monitor with non Zephyr OS

Didrik Rokhaug — Fri, 16 Jun 2023 16:40:09 GMT

Hi,

[quote user=""]

Question 1:

Are the displayed information field "LTE Network", "Device", "SIM" etc. sourced from the actual modem trace? Or are these information displays sourced from parsing the "normal" non trace log of the device in question? I'm asking since these fields are not populated in my tests but a modem trace is written.

[/quote]

I believe it is taken from the trace, but I need to double check this with the developers.

[quote user=""]

Question 2:

I also attached the modem trace to let someone at Nordic check if this is a valid modem trace. Is this modem trace a valid trace file? After this I will create a new topic with the actual modem related problem to be solved hopefully.

[/quote]

I was not able to decode this trace. There is some information in there (as in, the file is not empty or full of zeros), but it doesn't really look like a modem trace.

Are you sure it is from the right UART, or that there is nothing else in your application that uses UART1?

Best regards,

Didrik

RE: Usage of Cellular Monitor with non Zephyr OS

lobaro-theo — Fri, 16 Jun 2023 13:50:48 GMT

Ok, finally i figured it out:

Traces are send for the UART Interface with:

- 1 MBIT & Parity on

All AT commands and network traffic is included.

This can be closed.