nrf5340 ble full stack in network core

RE: nrf5340 ble full stack in network core

dejans — Thu, 18 Apr 2024 08:49:39 GMT

Hi,

There are two PRs which should resolve this issue - PR #13837 and PR #14063.

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

dejans — Fri, 11 Aug 2023 20:37:27 GMT

Hi,

Could you please try to remove (or comment out) configuration options shown below?
- remove (or comment out) 'CONFIG_BT_DEVICE_APPEARANCE=833' in samples/bluetooth/rpc_host/prj.conf
- remove (or comment out) 'CONFIG_BT_DEBUG_LOG=y' in samples/bluetooth/central_uart/child_image/rpc_host.conf

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

dejans — Fri, 28 Jul 2023 17:12:56 GMT

Hi,

We are still looking into your problem.

Thank you for your patience.

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

dejans — Wed, 19 Jul 2023 15:01:35 GMT

Hi,

To provide a short update, we are looking into your problem. I am expecting to get back to you by the end of next week.

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

dejans — Mon, 10 Jul 2023 08:55:55 GMT

Hi,

I have reported the issue internally. I will get back to you when I get new information.

Please note that due to vacations and reduced staffing, getting the reply might be delayed. Thank you for your patience and understanding.

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

dejans — Thu, 06 Jul 2023 16:50:51 GMT

Hi,

I have tested central_uart sample (building for nrf5340dk_nrf5340_cpuapp) from VS Code with additional Cmake argument -DCONFIG_BT_RPC_STACK=y. I have successfully reproduced the issue with different rpc_host.conf configurations. We will discuss this internally. I will get back to you when I get new information related to your problem.

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

quae — Wed, 05 Jul 2023 01:49:24 GMT

hello dejans.

i add CONFIG_BT_PERIPHERAL=n

CONFIG_BT_PERIPHERAL=n
# Enable the UART driver
CONFIG_UART_ASYNC_API=y
CONFIG_NRFX_UARTE0=y
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# Enable the BLE stack with GATT Client configuration
CONFIG_BT=y
CONFIG_BT_CENTRAL=y
CONFIG_BT_SMP=y
CONFIG_BT_GATT_CLIENT=y

# Enable the BLE modules from NCS
CONFIG_BT_NUS_CLIENT=y
CONFIG_BT_SCAN=y
CONFIG_BT_SCAN_FILTER_ENABLE=y
CONFIG_BT_SCAN_UUID_CNT=1
CONFIG_BT_GATT_DM=y
CONFIG_HEAP_MEM_POOL_SIZE=2048

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Enable bonding
CONFIG_BT_SETTINGS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_NVS=y
CONFIG_SETTINGS=y

# Config logger
# CONFIG_LOG=y
# CONFIG_USE_SEGGER_RTT=y
# CONFIG_LOG_BACKEND_RTT=y
# CONFIG_LOG_BACKEND_UART=n
# CONFIG_LOG_PRINTK=n

# CONFIG_ASSERT=y

it compiled well.

but run my application

ble central device print this log infinitely.

it seem like ble central function not working

*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***
*** Booting Zephyr OS build v3.2.99-ncs2 ***

RE: nrf5340 ble full stack in network core

dejans — Tue, 04 Jul 2023 10:19:54 GMT

Hi,

In my tests, I have seen the same error as you if I omit CONFIG_BT_PERIPHERAL=n. It seems that in your previous configuration (based on my previous reply), you forgot to include CONFIG_BT_PERIPHERAL=n.
Could you include this configuration option and try building again? Do you get the same result after programming the device?

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

quae — Tue, 04 Jul 2023 07:32:25 GMT

i tried another way.

this is my prj.conf.

CONFIG_BT=y
CONFIG_BT_PERIPHERAL=n
CONFIG_BT_CENTRAL=y
CONFIG_BT_OBSERVER=y
CONFIG_BT_DEVICE_NAME="Zephyr"
CONFIG_BT_SMP=y
CONFIG_BT_GATT_CLIENT=y
CONFIG_BT_GATT_DM=y
CONFIG_HEAP_MEM_POOL_SIZE=2048
# CONFIG_BT_DEBUG_LOG=y
CONFIG_BT_GATT_DM_DATA_PRINT=y
CONFIG_SETTINGS=y
CONFIG_BT_SETTINGS=y
CONFIG_NRF_RPC_THREAD_STACK_SIZE=2048

it is compiled well.

When I run an application, it starts infinitely.

ble central not working.

this is my ble central logs

Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host
*** Booting Zephyr OS build v3.2.99-ncs2 ***
Starting nRF RPC bluetooth host

RE: nrf5340 ble full stack in network core

quae — Tue, 04 Jul 2023 07:03:00 GMT

hello dejans build failed

this is my prj.conf child_image/rpc_host.conf.

# Enable the UART driver
CONFIG_UART_ASYNC_API=y
CONFIG_NRFX_UARTE0=y
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# Enable the BLE stack with GATT Client configuration
CONFIG_BT=y
CONFIG_BT_CENTRAL=y
CONFIG_BT_SMP=y
CONFIG_BT_GATT_CLIENT=y

# Enable the BLE modules from NCS
CONFIG_BT_NUS_CLIENT=y
CONFIG_BT_SCAN=y
CONFIG_BT_SCAN_FILTER_ENABLE=y
CONFIG_BT_SCAN_UUID_CNT=1
CONFIG_BT_GATT_DM=y
CONFIG_HEAP_MEM_POOL_SIZE=2048

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Enable bonding
CONFIG_BT_SETTINGS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_NVS=y
CONFIG_SETTINGS=y

# Config logger
# CONFIG_LOG=y
# CONFIG_USE_SEGGER_RTT=y
# CONFIG_LOG_BACKEND_RTT=y
# CONFIG_LOG_BACKEND_UART=n
# CONFIG_LOG_PRINTK=n

# CONFIG_ASSERT=y

build failed log

warning: BT_MAX_CONN (defined at
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf\subsys\bluetooth/Kconfig:14,
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf\subsys\bluetooth\rpc/Kconfig:170,
subsys/bluetooth/Kconfig:115) was assigned the value '1' but got the value '2'. See
docs.zephyrproject.org/.../kconfig.html and/or look up BT_MAX_CONN in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.

warning: Experimental symbol BT_RPC is enabled.

warning: user value 1 on the int symbol BT_MAX_CONN (defined at C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf\subsys\bluetooth/Kconfig:14, C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf\subsys\bluetooth\rpc/Kconfig:170, subsys/bluetooth/Kconfig:115) ignored due to being outside the active range ([2, 20]) -- falling back on defaults

error: Aborting due to Kconfig warnings

Parsing C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/zephyr/Kconfig
Loaded configuration 'C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/zephyr/boards/arm/nrf5340dk_nrf5340/nrf5340dk_nrf5340_cpunet_defconfig'
Merged configuration 'C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf/samples/bluetooth/rpc_host/prj.conf'
Merged configuration 'C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf/subsys/partition_manager/partition_manager_enabled.conf'
Merged configuration 'C:/Users/jaesun/Desktop/work/NORDIC/ble_full_stack/central_uart/child_image/rpc_host.conf'
CMake Error at C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/zephyr/cmake/modules/kconfig.cmake:328 (message):
command failed with return code: 1
Call Stack (most recent call first):
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf/cmake/modules/kconfig.cmake:29 (include)
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/zephyr/cmake/modules/zephyr_default.cmake:108 (include)
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
CMakeLists.txt:8 (find_package)

-- Configuring incomplete, errors occurred!
See also "C:/Users/jaesun/Desktop/work/NORDIC/ble_full_stack/central_uart/build/rpc_host/CMakeFiles/CMakeOutput.log".
See also "C:/Users/jaesun/Desktop/work/NORDIC/ble_full_stack/central_uart/build/rpc_host/CMakeFiles/CMakeError.log".
CMake Error at C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf/cmake/multi_image.cmake:433 (message):
CMake generation for rpc_host failed, aborting. Command: 1
Call Stack (most recent call first):
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf/cmake/multi_image.cmake:163 (add_child_image_from_source)
C:/Users/jaesun/Desktop/work/NORDIC/v2.3.0/nrf/samples/CMakeLists.txt:120 (add_child_image)

-- Configuring incomplete, errors occurred!
See also "C:/Users/jaesun/Desktop/work/NORDIC/ble_full_stack/central_uart/build/CMakeFiles/CMakeOutput.log".
See also "C:/Users/jaesun/Desktop/work/NORDIC/ble_full_stack/central_uart/build/CMakeFiles/CMakeError.log".
FAILED: build.ninja
C:\Users\jaesun\Desktop\work\NORDIC\toolchains\v2.3.0\opt\bin\cmake.exe --regenerate-during-build -SC:\Users\jaesun\Desktop\work\NORDIC\ble_full_stack\central_uart -BC:\Users\jaesun\Desktop\work\NORDIC\ble_full_stack\central_uart\build
ninja: error: rebuilding 'build.ninja': subcommand failed
FATAL ERROR: command exited with status 1: 'C:\Users\jaesun\Desktop\work\NORDIC\toolchains\v2.3.0\opt\bin\cmake.EXE' --build 'c:\Users\jaesun\Desktop\work\NORDIC\ble_full_stack\central_uart\build'

RE: nrf5340 ble full stack in network core

dejans — Mon, 03 Jul 2023 13:38:27 GMT

Hi,

I have reproduced your issue with flash overflow.

I have successfully tested central_uart sample in NCS v2.3.0 with argument -DCONFIG_BT_RPC_STACK=y. The solution for me was to copy the content of prj.conf into rpc_host.conf and disable all options related to logging which are found under "# Config logger" in prj.conf (and rpc_host.conf). Could you please provide information if this works for you as well?

Best regards,
Dejan

RE: nrf5340 ble full stack in network core

quae — Fri, 30 Jun 2023 16:43:10 GMT

i can't upload my log.

An error occurred. Please try again or contact your administrator.

this message shown