MQTT-SN communication problem using

RE: MQTT-SN communication problem using

AHaug — Thu, 13 Jul 2023 08:34:10 GMT

Hi Arun,

Unfortunately we don't have any resources that showcases how to do this other than what you may find at https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/index.html

I will leave the case open in case anyone on the open forum has experience with what you're working with, and I once again recommend you to reach out to the Zephyr forums to investigate there as well

Kind regards,
Andreas

RE: MQTT-SN communication problem using

ArunRuchir — Thu, 13 Jul 2023 04:25:18 GMT

Hi Andreas,

I was referring to my earlier query where our MQTTSN and RSMB combination is not working consistently. It's working on one set-up but not on the other (worked for some time). So, reliability becomes challenging and we are not sure where to look for any solution.

If some one is already using it and can share their config files for MQTTSN and RSMB, we will revalidate our set-up and see if that can work consistently.

Regards

Arun

RE: MQTT-SN communication problem using

AHaug — Wed, 12 Jul 2023 13:42:13 GMT

Hi,

[quote user="ArunRuchir"]Can some one share your specific config files and instructions to modify those? I believe this should help us. [/quote]

Could you be more spefic regarding this? Whos configuration of what?

Kind regards,
Andreas

RE: MQTT-SN communication problem using

ArunRuchir — Wed, 12 Jul 2023 09:47:09 GMT

Thanks for your response.

We did a complete re-installation. followed every possible step with care.

Unfortunately, it's still not working.

Can some one share your specific config files and instructions to modify those? I believe this should help us.

Thanks

RE: MQTT-SN communication problem using

AHaug — Wed, 05 Jul 2023 12:27:34 GMT

Hi,

We're currently in the main summer vacation period here in Norway so we're unfortunately experiencing slower response time than usual.

Based on your description it seems like there are either still something that is not matched in between your and your colleagues setup so I would recommend you retrace those steps one more time. Including completely wiping all devices, following the same guides and using the same firmware

In addition, if the issue persists, I would recommend that you reach out to the Zephyr forums on Discord (under technical resources at https://zephyrproject.org/) and raise a similar issue regarding the zephyr sample you mention.

Kind regards,
Andreas