Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

ramin — Thu, 03 Dec 2015 07:55:29 GMT

Hi, I'm having a similar problem. I'm trying to run Blinky on an nRF52 DK preview board. I'm getting the following error: "Error #540: 'NordicSemiconductor::Device:Startup:8.0.3' component is not available for target 'nrf52832_xxaa' when trying to compile under Keil uVision v5.17.0.0. As suggested here I reverted CMSIS to 4.2.0 and DeviceFamilyPack is set to 8.0.3 in the Pack Installer but it didn't make a difference. Not sure what I'm missing. Any suggestions? Thanks!

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

AntoineSur — Tue, 10 Nov 2015 13:11:41 GMT

That solved the problem. It builds now perfectly. Thank you very much for your help!

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

Einar Thorsrud — Tue, 10 Nov 2015 12:58:58 GMT

In general you should not select "latest" when you use pack, as not all Packs are compatible and they are not necessarily updated simultaneously. You are better of using a fixed version. In this case I suggest you fix the version of ARM::CMSIS to 4.2.0 (install it first if it is missing) and the version of the ...DeviceFamilyPack to 8.0.3.

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

AntoineSur — Tue, 10 Nov 2015 12:52:53 GMT

Links to both screen captures :

www.elab-nt.com/SelectSoftwarePack.JPG www.elab-nt.com/PackInstaller.JPG

Thank you

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

Einar Thorsrud — Tue, 10 Nov 2015 12:35:48 GMT

I am unable to reproduce this. Can you post a picture of the windows you get when clicking Project -> Manage -> Select Software Packs...? Possible also of the window Project -> Manage -> Pack Installer... with the ...DeviceFamilyPack and ARM::CMSIS expanded?

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

AntoineSur — Tue, 10 Nov 2015 10:26:06 GMT

Thank you for the reply. I've checked in Select Software Packs, the version 4.5.0 is selected so I still don't understand.

RE: Keil 5.17 and CMSIS Core 3.40.0 nrf52832_xxaa

Einar Thorsrud — Tue, 10 Nov 2015 09:52:12 GMT

Can you check the version of ARM::CMSIS pack from Project -> Manage -> Select Software Pakcs... ? You should be able to select version you want there (among the versions you have installed).