nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Kenneth — Mon, 09 Oct 2023 07:48:12 GMT

Hello,

For new questions please open a new ticket.

Kenneth

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Thu, 05 Oct 2023 22:45:56 GMT

Hello Kenneth, sorry got side tracked with other projects. The error still arises from the newer chips we had received so had to start using older chips which seem to avoid the issue. As an aside, if I am trying to send EMG analog signals through the low power bluetooth chip configuration, am I able to send it via a sampling rate of at least 1k? Is there a particular example code you would suggest I look to for reference regarding making changes to the advertisment rate? A colleague is having issues with being unable to reach that sort of sampling rate.

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Wed, 16 Aug 2023 07:49:05 GMT

Yes, and I had tried a circuit that had worked previously but no longer is compatible it seems. I either get this protection error or it remains as a JLINK notification indicating bad connections. However, whenever I or a colleague checks the resistances everything seems in order. We will try with a different computer to see if it ends up being the issue.

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Kenneth — Wed, 16 Aug 2023 07:46:58 GMT

Have anyone checked the schematic to ensure you have followed the reference schematic in terms of component placement and values?

Kenneth

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Wed, 16 Aug 2023 07:34:37 GMT

Understood, full circuit can run under 3.6 so that should not be a problem. Still not sure why the chips won't operate.

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Kenneth — Wed, 16 Aug 2023 07:32:02 GMT

Target voltage should be close to 3V when using the nRF51-DK as programmer/debugger. If you need to support the entire operating range you should check out a stand-alone SEGGER j-link:
https://www.segger.com/products/debug-probes/j-link/#comparison

Note: A target voltage of >3.6V will permanently damage the chip.

Kenneth

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Tue, 15 Aug 2023 16:11:59 GMT

I already tried the recover command ith the latest nrfjprog. Target voltage is 2.5-5 V and the version of the nRF51-DK is PCA10028, V1.2.3, 2017.32, 681906073.

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Kenneth — Tue, 15 Aug 2023 07:39:24 GMT

Hi,

I would recommend that you try to install the lastest nrf command line tool (nrfjprog) if you haven't already and try 'nrfjprog --recover' again.

Also I would recommend that you connect boards you have preivously made work, just to confirm that the setup is still correct and that you are not missing anything. This would narrow down the problem. What is the target voltage here and what version of the nRF51-DK do you have?

Kenneth

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Mon, 14 Aug 2023 19:50:42 GMT

Hello Kenneth,

I have indeed tried differnent DK and Target Boards. Same results. The one considerations is all Target Boards were soldered in bulk on their respective PCB's in the factory, so they all would have been part of the same process line most likely.

Sincerely,

Alexandre

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Kenneth — Mon, 14 Aug 2023 12:44:50 GMT

Have you tried a second board (DK and target board)? Something might have been damaged as some point.

Kenneth

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Thu, 10 Aug 2023 21:22:18 GMT

Hello Marte,

Yes, the configuration was verified several times and all pins were connected.

Sincerely,

Alexandre Tessier

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Marte Myrvold — Tue, 08 Aug 2023 07:17:33 GMT

Hi,

Can you verify that you have it connected like in the second picture in the case you linked to? Make sure to have GND on the nRF51822 connected to GND on both P20 and P1 on the nRF52 DK.

Best regards,
Marte

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Fri, 04 Aug 2023 15:13:30 GMT

Hello Marte,

Still failed as before. Attached is the log.

devzone.nordicsemi.com/.../22885.log.log

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Marte Myrvold — Fri, 04 Aug 2023 11:22:23 GMT

Hi,

It seems like the Programmer app is able to connect to the board in the log.

Can you try to run recover with device family?

nrfjprog -f nrf51 --recover --log

Best regards,
Marte

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Alexandre Tessier — Thu, 03 Aug 2023 20:34:53 GMT

Hello Marte,

I have tried running the erase all button as well. However it reads the following line. "Skipped reading, since at least one core has app readback protection"

LOG FILE:

2023-08-03T20:22:09.075Z DEBUG Application data folder: C:\Users\19apt1\AppData\Roaming\nrfconnect\pc-nrfconnect-programmer
2023-08-03T20:22:09.130Z DEBUG App pc-nrfconnect-programmer v3.0.9 local
2023-08-03T20:22:09.130Z DEBUG App path: C:\Users\19apt1\.nrfconnect-apps\node_modules\pc-nrfconnect-programmer
2023-08-03T20:22:09.130Z DEBUG nRFConnect 4.1.2, required by the app is (>=4.0.0)
2023-08-03T20:22:09.130Z DEBUG nRFConnect path: C:\Users\19apt1\AppData\Local\Programs\nrfconnect\resources\app.asar
2023-08-03T20:22:09.130Z DEBUG HomeDir: C:\Users\19apt1
2023-08-03T20:22:09.130Z DEBUG TmpDir: C:\Users\19apt1\AppData\Local\Temp
2023-08-03T20:22:09.397Z INFO Using nrf-device-lib-js version: 0.6.12
2023-08-03T20:22:09.397Z INFO Using nrf-device-lib version: 0.15.3
2023-08-03T20:22:09.397Z INFO Using nrfjprog DLL version: 10.19.1
2023-08-03T20:22:09.397Z INFO Using JLink version: JLink_V7.88j
2023-08-03T20:22:09.508Z INFO Getting serialport options from persistent store {E780BE3B-4FC4-11ED-9E27-546CEBC816C0}.pc-nrfconnect-programmer
2023-08-03T20:22:09.580Z INFO Installed JLink version does not match the provided version (V7.80c)
2023-08-03T20:22:14.080Z DEBUG Client Id: 43799c24-f0ff-463a-a3a5-95ab40ca8460
2023-08-03T20:22:14.474Z DEBUG Google Analytics for category pc-nrfconnect-programmer has initialized
2023-08-03T20:22:18.114Z INFO Getting serialport options from persistent store 000681222439.pc-nrfconnect-programmer
2023-08-03T20:22:18.599Z INFO Getting serialport options from persistent store 000681222439.pc-nrfconnect-programmer
2023-08-03T20:22:19.766Z INFO Using @nordicsemiconductor/nrf-device-lib-js to communicate with target via JLink
2023-08-03T20:22:19.766Z INFO JLink OB firmware version J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57
2023-08-03T20:22:19.767Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"architecture","label":"x64"}
2023-08-03T20:22:19.768Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink OB version","label":"J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57"}
2023-08-03T20:22:19.768Z INFO Device family NRF51_FAMILY
2023-08-03T20:22:19.768Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device family","label":"NRF51_FAMILY"}
2023-08-03T20:22:19.769Z INFO Device version NRF51xxx_xxAC_REV3
2023-08-03T20:22:19.769Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device version","label":"NRF51xxx_xxAC_REV3"}
2023-08-03T20:22:19.769Z INFO Board version PCA10028
2023-08-03T20:22:19.769Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device board version","label":"PCA10028"}
2023-08-03T20:22:19.770Z INFO Loading readback protection status for Application core
2023-08-03T20:22:19.770Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open device","label":"jlink"}
2023-08-03T20:22:20.030Z INFO Readback protection status: NRFDL_PROTECTION_STATUS_NONE
2023-08-03T20:22:20.273Z INFO Parse memory regions for Application core
2023-08-03T20:22:20.274Z INFO Update files regions according to Application core
2023-08-03T20:22:20.275Z INFO Parse memory regions for file
2023-08-03T20:22:20.279Z INFO Device is loaded and ready for further operation
2023-08-03T20:22:20.280Z INFO Reading memory for NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:22:20.572Z ERROR Failed to get device memory map: async task failure for id: 93033750 msg: [jlink] JLINKARM_DLL_READ_ERROR (Origin: "Error when running device operation fw-read")
2023-08-03T20:22:20.572Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to get device memory map: async task failure for id: 93033750 msg: [jlink] JLINKARM_DLL_READ_ERROR (Origin: \"Error when running device operation fw-read\")"}
2023-08-03T20:22:20.573Z ERROR Error when reading device
2023-08-03T20:22:24.461Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Close device","label":""}
2023-08-03T20:22:24.462Z INFO Target device closed
2023-08-03T20:22:29.038Z INFO Using @nordicsemiconductor/nrf-device-lib-js to communicate with target via JLink
2023-08-03T20:22:29.038Z INFO JLink OB firmware version J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57
2023-08-03T20:22:29.038Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink OB version","label":"J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57"}
2023-08-03T20:22:29.039Z INFO Device family NRF51_FAMILY
2023-08-03T20:22:29.039Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device family","label":"NRF51_FAMILY"}
2023-08-03T20:22:29.040Z INFO Device version NRF51xxx_xxAC_REV3
2023-08-03T20:22:29.040Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device version","label":"NRF51xxx_xxAC_REV3"}
2023-08-03T20:22:29.040Z INFO Board version PCA10028
2023-08-03T20:22:29.040Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device board version","label":"PCA10028"}
2023-08-03T20:22:29.041Z INFO Loading readback protection status for Application core
2023-08-03T20:22:29.041Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open device","label":"jlink"}
2023-08-03T20:22:29.429Z ERROR Failed to load readback protection status: async task failure for id: 101794426 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: protection-get")
2023-08-03T20:22:29.430Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to load readback protection status: async task failure for id: 101794426 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: protection-get\")"}
2023-08-03T20:22:29.432Z INFO Parse memory regions for Application core
2023-08-03T20:22:29.433Z INFO Update files regions according to Application core
2023-08-03T20:22:29.433Z INFO Parse memory regions for file
2023-08-03T20:22:29.435Z INFO Device is loaded and ready for further operation
2023-08-03T20:22:29.435Z INFO Skipped reading, since at least one core has app readback protection
2023-08-03T20:22:34.311Z INFO Recovering NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:22:34.694Z ERROR Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 107064957 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: recover")
2023-08-03T20:22:34.694Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 107064957 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: recover\")"}
2023-08-03T20:22:34.697Z INFO Device recovery completed
2023-08-03T20:22:34.698Z INFO Using @nordicsemiconductor/nrf-device-lib-js to communicate with target via JLink
2023-08-03T20:22:34.698Z INFO JLink OB firmware version J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57
2023-08-03T20:22:34.699Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink OB version","label":"J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57"}
2023-08-03T20:22:34.699Z INFO Device family NRF51_FAMILY
2023-08-03T20:22:34.699Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device family","label":"NRF51_FAMILY"}
2023-08-03T20:22:34.700Z INFO Device version NRF51xxx_xxAC_REV3
2023-08-03T20:22:34.700Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device version","label":"NRF51xxx_xxAC_REV3"}
2023-08-03T20:22:34.701Z INFO Board version PCA10028
2023-08-03T20:22:34.701Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device board version","label":"PCA10028"}
2023-08-03T20:22:34.702Z INFO Loading readback protection status for Application core
2023-08-03T20:22:35.095Z ERROR Failed to load readback protection status: async task failure for id: 107455479 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: protection-get")
2023-08-03T20:22:35.095Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to load readback protection status: async task failure for id: 107455479 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: protection-get\")"}
2023-08-03T20:22:35.098Z INFO Parse memory regions for Application core
2023-08-03T20:22:35.098Z INFO Update files regions according to Application core
2023-08-03T20:22:35.099Z INFO Parse memory regions for file
2023-08-03T20:22:35.100Z INFO Device is loaded and ready for further operation
2023-08-03T20:22:35.100Z INFO Skipped reading, since at least one core has app readback protection
2023-08-03T20:22:37.239Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Close device","label":""}
2023-08-03T20:22:37.240Z INFO Target device closed
2023-08-03T20:26:40.095Z INFO Using @nordicsemiconductor/nrf-device-lib-js to communicate with target via JLink
2023-08-03T20:26:40.095Z INFO JLink OB firmware version J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57
2023-08-03T20:26:40.096Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink OB version","label":"J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57"}
2023-08-03T20:26:40.097Z INFO Device family NRF51_FAMILY
2023-08-03T20:26:40.097Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device family","label":"NRF51_FAMILY"}
2023-08-03T20:26:40.098Z INFO Device version NRF51xxx_xxAC_REV3
2023-08-03T20:26:40.099Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device version","label":"NRF51xxx_xxAC_REV3"}
2023-08-03T20:26:40.099Z INFO Board version PCA10028
2023-08-03T20:26:40.100Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device board version","label":"PCA10028"}
2023-08-03T20:26:40.100Z INFO Loading readback protection status for Application core
2023-08-03T20:26:40.100Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open device","label":"jlink"}
2023-08-03T20:26:40.489Z ERROR Failed to load readback protection status: async task failure for id: 352854085 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: protection-get")
2023-08-03T20:26:40.490Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to load readback protection status: async task failure for id: 352854085 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: protection-get\")"}
2023-08-03T20:26:40.494Z INFO Parse memory regions for Application core
2023-08-03T20:26:40.495Z INFO Update files regions according to Application core
2023-08-03T20:26:40.495Z INFO Parse memory regions for file
2023-08-03T20:26:40.498Z INFO Device is loaded and ready for further operation
2023-08-03T20:26:40.499Z INFO Skipped reading, since at least one core has app readback protection
2023-08-03T20:26:42.829Z INFO Recovering NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:26:43.212Z ERROR Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 355583419 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: recover")
2023-08-03T20:26:43.212Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 355583419 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: recover\")"}
2023-08-03T20:26:43.214Z INFO Device recovery completed
2023-08-03T20:26:43.215Z INFO Using @nordicsemiconductor/nrf-device-lib-js to communicate with target via JLink
2023-08-03T20:26:43.215Z INFO JLink OB firmware version J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57
2023-08-03T20:26:43.215Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink OB version","label":"J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57"}
2023-08-03T20:26:43.216Z INFO Device family NRF51_FAMILY
2023-08-03T20:26:43.216Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device family","label":"NRF51_FAMILY"}
2023-08-03T20:26:43.216Z INFO Device version NRF51xxx_xxAC_REV3
2023-08-03T20:26:43.216Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device version","label":"NRF51xxx_xxAC_REV3"}
2023-08-03T20:26:43.217Z INFO Board version PCA10028
2023-08-03T20:26:43.217Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device board version","label":"PCA10028"}
2023-08-03T20:26:43.217Z INFO Loading readback protection status for Application core
2023-08-03T20:26:43.583Z ERROR Failed to load readback protection status: async task failure for id: 355971058 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: protection-get")
2023-08-03T20:26:43.583Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to load readback protection status: async task failure for id: 355971058 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: protection-get\")"}
2023-08-03T20:26:43.585Z INFO Parse memory regions for Application core
2023-08-03T20:26:43.586Z INFO Update files regions according to Application core
2023-08-03T20:26:43.587Z INFO Parse memory regions for file
2023-08-03T20:26:43.588Z INFO Device is loaded and ready for further operation
2023-08-03T20:26:43.588Z INFO Skipped reading, since at least one core has app readback protection
2023-08-03T20:28:49.457Z INFO Recovering NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:28:49.842Z ERROR Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 482039766 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: recover")
2023-08-03T20:28:49.842Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 482039766 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: recover\")"}
2023-08-03T20:28:49.844Z INFO Device recovery completed
2023-08-03T20:28:49.845Z INFO Using @nordicsemiconductor/nrf-device-lib-js to communicate with target via JLink
2023-08-03T20:28:49.845Z INFO JLink OB firmware version J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57
2023-08-03T20:28:49.846Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink OB version","label":"J-Link OB-SAM3U128-V2-NordicSemi compiled Nov 7 2022 16:21:57"}
2023-08-03T20:28:49.846Z INFO Device family NRF51_FAMILY
2023-08-03T20:28:49.847Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device family","label":"NRF51_FAMILY"}
2023-08-03T20:28:49.847Z INFO Device version NRF51xxx_xxAC_REV3
2023-08-03T20:28:49.847Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device version","label":"NRF51xxx_xxAC_REV3"}
2023-08-03T20:28:49.848Z INFO Board version PCA10028
2023-08-03T20:28:49.848Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Open jlink device board version","label":"PCA10028"}
2023-08-03T20:28:49.848Z INFO Loading readback protection status for Application core
2023-08-03T20:28:50.237Z ERROR Failed to load readback protection status: async task failure for id: 482430295 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: protection-get")
2023-08-03T20:28:50.237Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to load readback protection status: async task failure for id: 482430295 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: protection-get\")"}
2023-08-03T20:28:50.240Z INFO Parse memory regions for Application core
2023-08-03T20:28:50.241Z INFO Update files regions according to Application core
2023-08-03T20:28:50.241Z INFO Parse memory regions for file
2023-08-03T20:28:50.242Z INFO Device is loaded and ready for further operation
2023-08-03T20:28:50.242Z INFO Skipped reading, since at least one core has app readback protection
2023-08-03T20:30:41.219Z INFO Parsing HEX file: C:\ncs\nRF51822\nRF5_SDK_12.3.0_d7731ad\UART_hex_Ann uploaded.NRF51822.hex
2023-08-03T20:30:41.237Z INFO File was last modified at 7/31/2023, 1:52:33 PM
2023-08-03T20:30:41.259Z INFO Update files regions according to Application core
2023-08-03T20:30:41.259Z INFO Parse memory regions for file
2023-08-03T20:30:41.259Z INFO SoftDevice detected, id 0x5A (S110 v7.1.0)
2023-08-03T20:30:43.315Z INFO Recovering NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:30:43.704Z ERROR Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 595703838 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running operation: recover")
2023-08-03T20:30:43.704Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Failed to recover NRFDL_DEVICE_CORE_APPLICATION core: async task failure for id: 595703838 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running operation: recover\")"}
2023-08-03T20:30:43.706Z INFO Device recovery completed
2023-08-03T20:30:43.707Z INFO Writing procedure starts for NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:30:43.728Z INFO Writing HEX to NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:30:44.108Z ERROR Device programming failed with error: async task failure for id: 596121060 msg: [jlink] JLINKARM_DLL_ERROR (Origin: "Error when running device operation program")
2023-08-03T20:30:44.108Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Report error","label":"win32; x64; v3.0.9; Device programming failed with error: async task failure for id: 596121060 msg: [jlink] JLINKARM_DLL_ERROR (Origin: \"Error when running device operation program\")"}
2023-08-03T20:30:44.109Z INFO Writing HEX to NRFDL_DEVICE_CORE_APPLICATION core completed
2023-08-03T20:30:44.109Z INFO Writing procedure ends for NRFDL_DEVICE_CORE_APPLICATION core
2023-08-03T20:31:22.189Z DEBUG Sending usage data {"category":"pc-nrfconnect-programmer","action":"Close device","label":""}
2023-08-03T20:31:22.191Z INFO Target device closed

RE: nRF51822 chip nRF5 DK chip programing error "Error when running operation: protection.get"

Marte Myrvold — Thu, 03 Aug 2023 14:29:05 GMT

Hi,

Have you tried recovering the device using the 'erase all' button in the Programmer app?

Can you upload the complete log from the Programmer app? Click on 'open log file', copy the contents of the file and upload it here by going to Insert > Code and pasting the log there.

Best regards,
Marte