Can't build default project from webinar

RE: Can't build default project from webinar

dejans — Thu, 10 Aug 2023 08:08:10 GMT

Hi,

There is an easier route than to follow the webinar. You could explore our Bluetooth Low Energy Fundamentals course. It provides step-by-step guide and Git repository with exercises which should be easier to follow than webinar. Before you start with the course, please make sure that you fulfil the requirements listed on the course's start page.

Best regards,
Dejan

RE: Can't build default project from webinar

Mazotcu16 — Wed, 09 Aug 2023 15:22:38 GMT

I'm using Nrf 52810 dk for my build. I just changed the pin for led1 because i'm using dk as programmer for Raytac module. Now i can build project "peripheral_uart" but i'm still having trouble with webinar project.
I updated Cmakelists.txt, prf.conf and started with Hello World project. But i get errors about my board and etc. but i can build default Hello_World project so i dont understand why i have board errors.

RE: Can't build default project from webinar

dejans — Wed, 09 Aug 2023 14:47:57 GMT

Hi,

[quote user="Mazotcu16"]i dont have any other boards but i updated default DK. On some projects i can build like hello world and blinky, but i cant build peripheral, peripheral uart etc. [/quote]

Could you provide information about your DK?

If the sample is supported on specific board, you should not have problems building it. There is information on how to build and program the application in the documentation. You could have a look at provided nrf samples and read about testing and debugging.

Best regards,
Dejan

RE: Can't build default project from webinar

Mazotcu16 — Tue, 08 Aug 2023 14:44:41 GMT

Hello, i dont have any other boards but i updated default DK. On some projects i can build like hello world and blinky, but i cant build peripheral, peripheral uart etc.

-- west build: generating a build system

İ started by creating a hello world project.

RE: Can't build default project from webinar

dejans — Tue, 08 Aug 2023 14:05:28 GMT

Hi,

It seems that you build for nrf52dk_nrf52810 but there are other boards included in DBOARD_ROOT.

Could you please provide build command which you used when you got the error?

Have you started by creating a new freestanding application in VS Code?

Best regards,
Dejan