Compilation Errors

RE: Compilation Errors

Murthy Udupa — Thu, 24 Aug 2023 11:56:37 GMT

Hi Vidar,

All compilation issues solved. Yes, the issues was many files were not included.

RE: Compilation Errors

Murthy Udupa — Wed, 23 Aug 2023 13:35:40 GMT

Thanks very much. That is good enough clue for me to pursue this.

RE: Compilation Errors

Vidar Berg — Wed, 23 Aug 2023 11:21:33 GMT

Hi,

The linker errors suggest that you are either missing source files in your project or they haven't been enabled in sdk_config.h. For example, does your project include the nrfx_saadc.c file?

RE: Compilation Errors

Murthy Udupa — Wed, 23 Aug 2023 10:34:58 GMT

Hi Vidar,

Made necessary changes to sdk_config.h and can now compile without errors.

However, I get 100+ linkers errors : I know I am missing some linker settings (you had mentioned this will need change) but cannot resolve. Grateful for any leads on this one.

Thanks in advance

RE: Compilation Errors

Murthy Udupa — Wed, 23 Aug 2023 06:55:54 GMT

Thanks Vidar Berg,

I will try with 'PCA10056' first.

I had not connected any board to USB and the nrfprog could be related to that. My first goal was to see it the code compiles.

RE: Compilation Errors

Vidar Berg — Tue, 22 Aug 2023 11:43:09 GMT

Hello,

It would be better if you could start with a 'PCA10056' (Supported boards) project which is configured for the 52840 DK board. Just changing the pre-processor definition from 52833 to 52840 is not sufficient, you would also need to change the linker settings, startup files, debugger settings to match the device type.

The nrjprog error indicates a connectivity problem between your PC and debugger. It should not be related to the FW or board you are trying to program. Have you tried to see if it works on another PC or USB cable?

Best regards,

Vidar