nrf7002 DK not getting detected on VS code

RE: nrf7002 DK not getting detected on VS code

Jul — Fri, 01 Dec 2023 12:53:14 GMT

For information, i had the same problem with this board after a reinstalling of the complete nRF toolchain . I remembered that before reinstallation the ports com number of my board was 10 and 11 while after reinstallation they passed on 3 and 4. I have try to put the old ports com numbers and the board was found. It's not a really understandable default but if my experience it can help.

RE: nrf7002 DK not getting detected on VS code

overflow — Tue, 03 Oct 2023 22:33:50 GMT

Finally I did a réinstallation of my w10 os and reinstall all the tools, and now I can detect the device, so now all is good. But I don't know exactly the source of the problem.

Thanks.

RE: nrf7002 DK not getting detected on VS code

Amanda Hsieh — Thu, 21 Sep 2023 20:05:48 GMT

Did you try another PC/ USB port / USB cable?

Open Command Prompt from the Windows tool instead of vscode, type "nrfjprog -v" and "nrfjprog --deviceversion", and provide the return.

RE: nrf7002 DK not getting detected on VS code

overflow — Thu, 21 Sep 2023 14:56:56 GMT

I did all this before, i was having the lastest version of the nRF Command Line Tool since you told me before, just that I downgrade due to this link abluethinginthecloud.com/.../, haha

I Did what you said to you're last reply, not still work

RE: nrf7002 DK not getting detected on VS code

Amanda Hsieh — Thu, 21 Sep 2023 13:29:12 GMT

Hi,

Your tool version is v10.17 instead of the latest version v10.23. Try to install the lasted version of the nRF Command Line Tool which would also install the required software for VS code and make sure the nrfjprog -v returns the v10.23.

-Amanda H.

RE: nrf7002 DK not getting detected on VS code

overflow — Wed, 20 Sep 2023 20:48:13 GMT

The outpout of "nrfjprog -v"

What I get when I open J-Link commander

Also I have tried another usb cable, and I have the same issue, Vscode don't detect my DK. Windows can detect it and I see the mass storage of the DK and I can R/W data in the DK storage.

For the white sticker I don't know if It's It or not, this i what I found on my DK.

RE: nrf7002 DK not getting detected on VS code

Amanda Hsieh — Wed, 20 Sep 2023 14:59:38 GMT

Hi,

Please open J-Link commander and provide the detected information. It should get something like this

If not, please check the connection of the DK and PC, like using another USB port or USB cable that can transmit data instead of only power. and provide a snapshot of the white sticker on the DK. Also, type the "nrfjprog -v" command and provide the return.

-Amanda H.

RE: nrf7002 DK not getting detected on VS code

overflow — Wed, 20 Sep 2023 14:21:23 GMT

Hi, this is what I have when type the command "nrfjprog --deviceversion"

RE: nrf7002 DK not getting detected on VS code

Amanda Hsieh — Wed, 20 Sep 2023 12:31:28 GMT

Please type the "nrfjprog --deviceversion" command and provide the return.

RE: nrf7002 DK not getting detected on VS code

overflow — Tue, 19 Sep 2023 21:10:19 GMT

Hi, already have the lastest version of the nRF Command Line Tool.

RE: nrf7002 DK not getting detected on VS code

Amanda Hsieh — Tue, 19 Sep 2023 18:48:05 GMT

Hi,

Try to install the lasted version of the nRF Command Line Tool which would also install the required software for VS code.

Regards,
Amanda H.