Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

Karl Ylvisaker — Mon, 02 Oct 2023 08:02:57 GMT

Hello,

I am glad to read that you were able to resolve the issue with the overlay file!
Does this mean that it now functions as expected, or is there any other issues or questions with this that you require technical support with?

Best regards,
Karl

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

edmcnicholas — Sat, 30 Sep 2023 07:15:03 GMT

This seems to be more an mcu boot build issue and was fixed by another changed to the child image to move the overlay from board name to mcuboot.overlay

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

edmcnicholas — Fri, 29 Sep 2023 20:55:25 GMT

The dfu skips dfu and goes right to validating as well

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

edmcnicholas — Fri, 29 Sep 2023 20:53:14 GMT

I get these failures with spi nor

[00:00:12.072,662] <inf> bleRecovery: Connected
[00:00:13.059,326] <inf> mcuboot_util: Swap type: test
[00:00:13.059,600] <inf> mcuboot_util: Swap type: test
[00:00:13.059,600] <err> mcumgr_img_grp: Image upload inspect failed: 5
[00:00:13.159,790] <inf> mcuboot_util: Swap type: test
[00:00:13.160,064] <inf> mcuboot_util: Swap type: test
[00:00:13.160,095] <err> mcumgr_img_grp: Image upload inspect failed: 5
[00:00:13.259,796] <inf> mcuboot_util: Swap type: test
[00:00:13.260,070] <inf> mcuboot_util: Swap type: test
[00:00:13.260,101] <err> mcumgr_img_grp: Image upload inspect failed: 5
[00:00:13.359,802] <inf> mcuboot_util: Swap type: test
[00:00:13.360,076] <inf> mcuboot_util: Swap type: test
[00:00:13.360,107] <err> mcumgr_img_grp: Image upload inspect failed: 5
[00:00:13.459,838] <inf> mcuboot_util: Swap type: test
[00:00:13.460,113] <inf> mcuboot_util: Swap type: test
[00:00:13.460,144] <err> mcumgr_img_grp: Image upload inspect failed: 5

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

edmcnicholas — Fri, 29 Sep 2023 19:36:26 GMT

Those commands by themselves do not work for spi nor. Using the kconfig link excluding qspi worked for units without nor but not for spi nor. I am still trying to find a working config.

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

edmcnicholas — Thu, 28 Sep 2023 21:26:44 GMT

Thanks for the update but please consider changing the qspi line to be excluded if spi nor is included especially since the nrf7002 dk uses spi nor.

imply NORDIC_QSPI_NOR if $(dt_chosen_enabled,$(DT_CHOSEN_EXT_FLASH))

RE: Nrfconnect 2.4.0 + added qspi for when using spi nor for mcuboot breaking build

khelmutlord — Thu, 28 Sep 2023 20:26:05 GMT

The Kconfig you are using is defined in this file here:

https://github.com/nrfconnect/sdk-nrf/blob/7e80dfb9f9b96f0b6ec039e6559c906167764ba0/samples/common/mcumgr_bt_ota_dfu/Kconfig#L25

It is intended to be used with specific samples. You could, instead, add the Kconfigs it selects to your project instead of using CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU. It seems that the Kconfig is used with samples/boards that use have QSPI flash available.

Specifically, these Kconfigs:
CONFIG_MCUMGR=y

CONFIG_NET_BUF=y

CONFIG_ZCBOR=y

CONFIG_CRC=y

CONFIG_MCUMGR_TRANSPORT_BT=y