PWM Frequency

RE: PWM Frequency

Ruben — Mon, 21 Apr 2014 12:59:19 GMT

Hi Mike,

thanks for your quick reply. Sounds like a good hack, but unfortunately that could not work for me. Mainly due to size restrictions, I still hope I manage to find a way to increase the PWM on the RFduino itself. I can't imagine that it would not be possible to do this.

I hope I'll find a solution soon :S

Cheers

RE: PWM Frequency

Mike Zumbrunnen — Sat, 19 Apr 2014 15:14:05 GMT

Hello Ruben,

Thanks for the reply and links. I'll need to look at them and the SDK mentioned in the reply above yours.

What I did to get the project moving was implemented a work around. I haven't gotten back to solving the correct way which is adjusting the frequency in the RFDuino.

My work around was to use a Tiny85 as the PWM higher frequency generator. Basically, the low PWM signal from the RFDuino goes through a low pass filter so it looks like an analog out signal. The new analog signal is read by the Tiny85 and re-transmitted out of it as a higher PWM frequency to my pump motor. All is good.

This added about a buck to my project but got me moving on. Some day I'll return and do it right.

Hope this helps.

Mike

RE: PWM Frequency

Ruben — Sat, 19 Apr 2014 14:22:34 GMT

Hi Mike,

Have you found a solution to increase the PWM frequency on the RFduino in a way that I can keep on using the analogWrite function?

I was able to slow it down by increasing the divider, but unable to increase the frequency since it was already set to 1 (2^0). ( I believe the base frequency is around ±240hz)based on this thread: forum.rfduino.com/index.php

But I've found a way to ramp the PWM frequency up to 62.5 kHz based on this: forum.rfduino.com/index.php

Unfortunately the RFduinoBLE function interferes with this way of pumping up the frequency (the signal start to jump around as soon as I do RFduinoBLE.begin();. Not exactly sure why but have the feeling it has to do with the interrupts.

I tried several things but haven't been successful in increasing the frequency in a different way.

Hope you can help.

Cheers,

RE: PWM Frequency

Ole Morten — Fri, 06 Dec 2013 16:04:25 GMT

The library and examples you found depends on having the full nRF51 SDK, which I'm not sure you'll get when using an RFduino.

The regular SDK is available for download from our main page if you have a product key for one of our nRF51 kits. If you already have it, the examples should compile if the Simple PWM folder is put in the nrf51822\Board\nrf6310\ folder inside the SDK.

RE: PWM Frequency

Bastiaan — Wed, 04 Dec 2013 05:20:32 GMT

I've found the include files but still haven't figured it out. I guess this problem is beyond my abilities. I'll keep trying. Any clues would be appreciated. Thx.

RE: PWM Frequency

Guest — Wed, 04 Dec 2013 05:20:32 GMT

I've found the include files but still haven't figured it out. I guess this problem is beyond my abilities. I'll keep trying. Any clues would be appreciated. Thx.