NORDIC nRF52480 USB Dongle Unable to work with the S340 soft device for ANT and BLE applications.

RE: NORDIC nRF52480 USB Dongle Unable to work with the S340 soft device for ANT and BLE applications.

Kenneth — Sun, 29 Oct 2023 21:06:53 GMT

I see you have two problems related to the same, so I suggest that we continue there:
https://devzone.nordicsemi.com/f/nordic-q-a/105008/nrf52480-usb-dongle-ant-radio/452889

Kenneth

RE: NORDIC nRF52480 USB Dongle Unable to work with the S340 soft device for ANT and BLE applications.

AMT — Thu, 26 Oct 2023 20:37:12 GMT

I was able to clear the error and create the HEX file. The hex file contains only the application, so I added the ANT_s340_nrf52840_6.1.1 soft device that was downloaded from "thisisant.com"

I programmed the Nordic USB (pca10059) dongle with no problem, but the computer does not recognize it after reconnecting it. Did I miss something that I need to do? Any help would be appreciated.

Thanks

RE: NORDIC nRF52480 USB Dongle Unable to work with the S340 soft device for ANT and BLE applications.

AMT — Thu, 26 Oct 2023 18:20:14 GMT

Thanks, Kenenth, for the quick reply.

I opened the file that you pointed out but has an error when I build it. Do you happen to see this before? Also, this is for board pca10056, do I have to configure it for pca10059? If so, how can I do that?

Thanks

RE: NORDIC nRF52480 USB Dongle Unable to work with the S340 soft device for ANT and BLE applications.

Kenneth — Thu, 26 Oct 2023 11:34:46 GMT

Hello,

The flash size required by S140 and S340 is not the same, so the start address of the application need to change. The easiest may be just to open an ble project that support both, e.g. \examples\ble_peripheral\ble_app_hrs\pca10056 you can find both are supported.

Kenenth