RE: Help with Integrating Telit BlueEva Sxx Board and Waveshare Epaper Display (2.13 inch Version 2)

hmolesworth — Thu, 16 Nov 2023 17:38:42 GMT

You might start with the Adafruit Feather 2.13 inch e-ink FeatherWing board and a Feather nRF52832 to get working code and the display layout correct, then migrate the code to the SDK.

See 2.13" E-Ink FeatherWing and Bluefrruit Feather nRF52832

RE: Help with Integrating Telit BlueEva Sxx Board and Waveshare Epaper Display (2.13 inch Version 2)

Raoul — Thu, 16 Nov 2023 14:22:00 GMT

Hi Ankitha,

In the NCS Fundamentals course you might have learned about Zephyr's "boards" concept. As far as I know your board is not one of Zephyr's supported boards, and neither do I find any user made boards on DevZone on GitHub, so you'll have to make your own (or ask Telit).

I can't do it for you but I can point you in the right direction. This is the guide to follow: https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/hardware/porting/board_porting.html

If you have smaller questions related to this process, I think the Zephyr Discord is a good place to consult.

Of course, feel free to contact us on DevZone if you have further questions or issues with our chip or SDK.

Best regards,

Raoul