I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

sanket_cha — Fri, 30 Aug 2024 06:23:27 GMT

Hello Maria,

Thank you for the detail. I will go through it and try it.

Shall get back to you once I have any update.

Best Regards,

Sanket Chadawar

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

Maria Gilje — Wed, 28 Aug 2024 11:36:21 GMT

Hello,

I have tried to reproduce the issue, but so far I am not having any issues with scanning for the advertisements. This is my method:

Add
```
config BT_DEVICE_NAME
default "CUSTOM_AUDIO"
```
to nrf5340_audio/unicast_server/Kconfig.defaults
Change https://github.com/nrfconnect/sdk-nrf/blob/v2.7.0/applications/nrf5340_audio/unicast_client/main.c#L571-L572 to
```
ret = bt_mgmt_scan_start(0, 0, BT_MGMT_SCAN_TYPE_CONN, "CUSTOM_AUDIO",
BRDCAST_ID_NOT_USED);
```

Build and flash the application with

python .\tools\buildprog\buildprog.py -c both -d both -b debug --pristine -p -f

from the nrf5340_audio directory.

Observe that the headset connects to the gateway.

Gateway:

*** Booting nRF Connect SDK v2.7.0-5cb85570ca43 ***
*** Using Zephyr OS v3.6.99-100befc70c74 ***
GW [00:00:00.286,407] <inf> board_version: Compatible board/HW version found: 1.0.0
GW [00:00:00.311,279] <inf> fw_info: 
         nRF5340 Audio nRF5340 Audio DK cpuapp                      
         NCS base version: 2.7.0                            
         Cmake run : Wed Aug 28 12:45:47 2024
GW [00:00:00.311,279] <inf> fw_info: ------- DEBUG BUILD -------
GW [00:00:00.311,279] <inf> fw_info: Compiled for GATEWAY device
GW [00:00:00.382,049] <inf> bt_mgmt: Clearing all bonds
GW [00:00:00.384,185] <inf> bt_mgmt_ctlr_cfg: Controller: SoftDevice: Version 5.4 (0x0d), Revision 8699
GW [00:00:00.384,399] <inf> bt_mgmt: Local identity addr: D1:D9:6F:57:FD:47 (random)
GW [00:00:00.384,521] <inf> audio_usb: Ready for USB host to send/receive.
GW [00:00:00.388,214] <inf> bt_mgmt_scan: Local addr: 41:89:24:EC:49:9B (random). May time out. Updates not printed
GW [00:00:00.388,214] <inf> bt_mgmt_scan: Scanning successfully started
GW [00:00:00.430,816] <inf> bt_mgmt_scan: Creating connection to device: 72:09:F8:5D:C1:CB (random)
GW [00:00:00.536,315] <inf> bt_mgmt: Connected: 72:09:F8:5D:C1:CB (random)
GW [00:00:00.536,346] <inf> main: Connection event. Num connections: 1
GW [00:00:00.768,829] <inf> main: Security changed
GW [00:00:00.805,633] <wrn> bt_vol_ctlr: Failed to mute for remote channel 0, ret = -22
GW [00:00:00.958,862] <inf> bt_vol_ctlr: VCS discover finished
GW [00:00:01.328,918] <inf> main: Set members found: 1 of 2
GW [00:00:01.329,925] <inf> bt_mgmt_scan: Local addr: 41:89:24:EC:49:9B (random). May time out. Updates not printed
GW [00:00:01.329,956] <inf> bt_mgmt_scan: Scanning successfully started
GW [00:00:01.628,753] <inf> unicast_client: Discovered 1 sink endpoint(s) for device 0
GW [00:00:01.649,871] <inf> unicast_client: LEFT sink stream configured
GW [00:00:01.649,902] <inf> le_audio: LC3 codec config for sink:
GW [00:00:01.649,902] <inf> le_audio:   Frequency: 48000 Hz
GW [00:00:01.649,902] <inf> le_audio:   Duration: 10000 us
GW [00:00:01.649,902] <inf> le_audio:   Channel allocation: 0x1
GW [00:00:01.649,932] <inf> le_audio:   Octets per frame: 120 (96000 bps)
GW [00:00:01.649,932] <inf> le_audio:   Frames per SDU: 1
GW [00:00:02.088,714] <inf> unicast_client: Stream 0x20011cb4 started

Headset:

*** Booting nRF Connect SDK v2.7.0-5cb85570ca43 ***
*** Using Zephyr OS v3.6.99-100befc70c74 ***
HL [00:00:00.296,813] <inf> board_version: Compatible board/HW version found: 1.0.0
HL [00:00:00.321,899] <inf> fw_info: 
         nRF5340 Audio nRF5340 Audio DK cpuapp                      
         NCS base version: 2.7.0                            
         Cmake run : Wed Aug 28 12:38:28 2024
HL [00:00:00.321,899] <inf> fw_info: ------- DEBUG BUILD -------
HL [00:00:00.321,929] <inf> fw_info: HEADSET left device
HL [00:00:00.393,280] <inf> bt_mgmt: Clearing all bonds
HL [00:00:00.395,507] <inf> bt_mgmt_ctlr_cfg: Controller: SoftDevice: Version 5.4 (0x0d), Revision 8699
HL [00:00:00.395,721] <inf> bt_mgmt: Local identity addr: D8:E2:87:FA:ED:CB (random)
HL [00:00:00.424,499] <wrn> unicast_server: CSIP using the default SIRK, must be changed before production
HL [00:00:00.428,131] <inf> bt_mgmt_adv: Local addr: 72:09:F8:5D:C1:CB (random)
HL [00:00:00.428,649] <inf> bt_mgmt_adv: Advertising successfully started
HL [00:00:00.543,853] <inf> bt_mgmt: Connected: 41:89:24:EC:49:9B (random)
HL [00:00:00.543,914] <inf> main: Connection event. Num connections: 1
HL [00:00:00.776,184] <inf> main: Security changed
HL [00:00:00.849,792] <inf> bt_vol_rend: Volume = 195, mute state = 1
HL [00:00:01.266,235] <inf> bt_content_ctrl_media: Discovery of MCS finished
HL [00:00:01.646,423] <inf> le_audio: LC3 codec config for sink:
HL [00:00:01.646,423] <inf> le_audio:   Frequency: 48000 Hz
HL [00:00:01.646,423] <inf> le_audio:   Duration: 10000 us
HL [00:00:01.646,453] <inf> le_audio:   Channel allocation: 0x1
HL [00:00:01.646,453] <inf> le_audio:   Octets per frame: 120 (96000 bps)
HL [00:00:01.646,453] <inf> le_audio:   Frames per SDU: 1
HL [00:00:01.666,412] <inf> main: Presentation delay 3000 us is set by initiator
HL [00:00:02.012,542] <inf> unicast_server: Stream 0x20010a18 started
HL [00:00:02.013,580] <wrn> le_audio_rx: Not in streaming state (1), thrown 1 packet(s)
HL [00:00:02.025,512] <wrn> audio_datapath: Data received, total under-runs: 1

Turn off the gateway and reset the Headset with deleted bonding information.
Use the nRF Connect for Android app (v4.28.1) on a Pixel 7 Pro (Android 14) to scan for the headset advertisements.
- Verify that the advertisements are successfully scanned by the phone:

Please let me know if I am missing any details in my method.

Best regards,

Maria

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

sanket_cha — Wed, 21 Aug 2024 07:27:05 GMT

Hello Maria,

Do I understand correctly that you were able to make the connection work when deleting bonding information on reboot? Are you getting identical error logs? Please share the new logs if they are different.

[SC]: Yes, default example (without changing any thing) I am able to connect the Unicast client and server to each other and get the audio.

But my point is (please forgive me I mentioned wrongly in my previous comment). One device shall adv and another device shall scan. But the device which is adv I am not able to see the adv in the mobile phone (when I turn on the BT scan of the mobile phone-- earlier I used to see the adv in mobile bt name NRF5340_AUDIO). Please note that I kept scanner device OFF at this point and deleted the bonding.

Note: As I am not able to see the logs using the serial port so I am not sure what is happening inside.

My question here is how to see the adv ifrom the advertiser (unicast sink ) in the mobile phone?

When you upgraded to NCS v2.7.0, did you build and flash both the app and network core?

Yes I build and flashed both (because I can hear the audio played using the usb of one device and listen to the another device using the Headphone jack)

Also when I try to modify any thing from the scanner (as I want to adv from my device with some other name so I replaced CONFIG_BT_DEVICE_NAME in https://github.com/nrfconnect/sdk-nrf/blob/v2.6.0/applications/nrf5340_audio/unicast_client/main.c#L501) and also intentionally added some extra charat after the ; and observed that my west build is still passing and not giving any error

So I think that the file is not a part of the bulild.

Please guide me here to modify the code so that from Gateway (unicast client) I can modify and make it able to scan any other keyword.

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

Maria Gilje — Tue, 20 Aug 2024 05:16:26 GMT

Hello,

[quote user="sanket_cha"]I upgraded the NRF COnnect SDK to 2.7.0 and now I am not able to do the same as per previous comments.[/quote]

Do I understand correctly that you were able to make the connection work when deleting bonding information on reboot? Are you getting identical error logs? Please share the new logs if they are different.

When you upgraded to NCS v2.7.0, did you build and flash both the app and network core?

[quote user="sanket_cha"]Also I am not able to see the adv from the gate way device in my mobile phone (earlier version I used to see it in the mobile BT scanner)?[/quote]

The unicast gateway configuration of the audio application will scan, not advertise. The broadcast source configuration will advertise.

Best regards,

Maria

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

sanket_cha — Tue, 13 Aug 2024 12:04:15 GMT

Hello Team,

I upgraded the NRF COnnect SDK to 2.7.0 and now I am not able to do the same as per previous comments.

When I try to modify the here. I observed that it is not a part of the build (I intentionally inserted the build error) and post that also I the build is passed.

Please guide me.

Also I am not able to see the adv from the gate way device in my mobile phone (earlier version I used to see it in the mobile BT scanner)?

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

Maria Gilje — Thu, 18 Apr 2024 11:43:04 GMT

Hi Sanket Chadawar,

My initial hypothesis is that there could be bonding information left in one of the devices. Are you able to create the connection without errors when you delete bonding information on both devices and then reboot them?

Best regards,

Maria

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

sanket_cha — Mon, 15 Apr 2024 09:29:18 GMT

Thank you Maria for the help. I could able to scan my device with NRF5340 but now I stuck with below error:

GW [00:00:58.046,081] <inf> bt_mgmt_scan: Scanning successfully started
GW [00:00:58.134,460] <inf> bt_mgmt_scan: Creating connection to device: 43:82:A1:00:1F:AC (public)
GW [00:00:58.134,552] <wrn> bt_conn: Found valid connection (0x20004538) with address 43:82:A1:00:1F:AC (public) in connected state
GW [00:00:58.134,552] <err> bt_mgmt_scan: Could not init connection
GW [00:00:58.135,650] <inf> bt_mgmt_scan: Local addr: 42:1F:1C:C1:47:DB (random). May time out. Updates not printed
GW [00:00:58.135,650] <inf> bt_mgmt_scan: Scanning successfully started

I am getting repeated error as above. What extra action I need to take here? Please suggest here.

Best Regards,

Sanket Chadawar

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

sanket_cha — Mon, 15 Apr 2024 09:29:18 GMT

Thank you Maria for the help. I could able to scan my device with NRF5340 but now I stuck with below error:

GW [00:00:58.046,081] <inf> bt_mgmt_scan: Scanning successfully started
GW [00:00:58.134,460] <inf> bt_mgmt_scan: Creating connection to device: 43:82:A1:00:1F:AC (public)
GW [00:00:58.134,552] <wrn> bt_conn: Found valid connection (0x20004538) with address 43:82:A1:00:1F:AC (public) in connected state
GW [00:00:58.134,552] <err> bt_mgmt_scan: Could not init connection
GW [00:00:58.135,650] <inf> bt_mgmt_scan: Local addr: 42:1F:1C:C1:47:DB (random). May time out. Updates not printed
GW [00:00:58.135,650] <inf> bt_mgmt_scan: Scanning successfully started

I am getting repeated error as above. What extra action I need to take here? Please suggest here.

Best Regards,

Sanket Chadawar

RE: I am not able to scan the advertisement from my unicast sink into the NRF5340 unicast Gate way application

Maria Gilje — Wed, 10 Apr 2024 13:16:38 GMT

Hi Sanket,

By default the gateway will search for devices named "NRF5340_AUDIO". This is set in the scan parameters for the Unicast Client and the code is found here. If you change the name to an empty string or the name your Unicast headset is advertising with, your gateways should find the advertisements.

Best regards,

Maria