Thingy53 can't be found in build configuration boards

RE: Thingy53 can't be found in build configuration boards

Menon — Wed, 05 Jun 2024 09:36:10 GMT

Hello,

Sorry for the delay. I was sick yesterday, which caused some delay in responding. I tested this here, and what you are saying is true. When I flash the Zigbee weather station sample, I don't see my Thingy53 anymore inside the programmer. I am not sure whether this precompiled application firmware is supposed to be visible in the programmer app. Have you tested the application inside the SDK? I recommend following the testing section defined under the application.

Kind Regards,

Abhijith

RE: Thingy53 can't be found in build configuration boards

Nouran Hussein — Tue, 04 Jun 2024 21:26:12 GMT

is there new updates ?

RE: Thingy53 can't be found in build configuration boards

Nouran Hussein — Sun, 02 Jun 2024 12:22:43 GMT

the board works fine with matter, but with zigbee weather station app is not working at all, even can't get app name right in programmer.

RE: Thingy53 can't be found in build configuration boards

Nouran Hussein — Fri, 31 May 2024 22:14:22 GMT

Hello,

Yes, the board still in bootloader state, I already succeeded to flash Matter weather station following the mentioned steps, but i faced that problem with Zigbee weather station app.

RE: Thingy53 can't be found in build configuration boards

Menon — Fri, 31 May 2024 09:15:56 GMT

Hello,

I think your thingy53 is still in bootloader state. Could you send me a screenshot of the programmer app (the whole programmer app)? Steps for working with precompiled firmware samples have been briefed in this section; have you followed them?

Kind Regards,

Abhijith

RE: Thingy53 can't be found in build configuration boards

Nouran Hussein — Thu, 30 May 2024 13:26:58 GMT

I'm Trying to flash Zigbee Weather station App on thingy53, there is no issue appearing in the programmer logs, but after flashing the app successfully using the attached file i got from https://www.nordicsemi.com/Products/Development-hardware/Nordic-Thingy-53/Downloads#infotabs , the board is not running the application instead i found the board name changed to bootloader thingy:53 not Zigbee Weather Station.

I'm using SDK 2.6.0 also i tried to flash the app from SDK 2.5.0 and got the same behavior.

devzone.nordicsemi.com/.../zigbee_5F00_weather_5F00_station_5F00_2.6.0_5F00_thingy53.zip

RE: Thingy53 can't be found in build configuration boards

Menon — Thu, 30 May 2024 13:15:09 GMT

Hello,

Could you send me a screenshot from the nRF Connect desktop programmer app that indicates the issue? Give me a bit more details, like what you are trying to achieve here. Which SDK version are you using here?

What does the log from the nRF programmer say?

Kind Regards,

Abhijith

RE: Thingy53 can't be found in build configuration boards

Nouran Hussein — Thu, 30 May 2024 12:36:39 GMT

Hello,

now i tried to flash Zigbee Weather station using programmer v4.3.0 but the app is not lunched still in bootloader state, although when i tried matter weather station it's working fine.

i don't know if it a release problem, i'm using 2024-03-22-precompiled-application-firmware.

RE: Thingy53 can't be found in build configuration boards

Menon — Thu, 30 May 2024 12:21:09 GMT

Hello,

I am not sure why you are not able to see Thingy53 inside the build configuration. See my screenshot below.

Please see that Thingy53 doesn't come with an onboard debugger. So see the section Developing with Thingy53 to get an idea of working with this module.

Kind Regards,

Abhijith