printk no longer works in project

RE: printk no longer works in project

runsiv — Tue, 11 Jun 2024 07:26:13 GMT

Okey that's good to know. I What i would suggest is to delete your build folder and try a prestine build to see if it solves the problem. I can also try to replicate it if you upload your application( We can set the ticket to private if you don't want to share your application public). I don't see anything that stands out from your prj.conf. Could you try to enable logging and see if it outputs anything on serial or rtt?

Regards

Runar

RE: printk no longer works in project

Scerion — Mon, 10 Jun 2024 15:23:21 GMT

Hi, yes I did try another sample and it did output the expected Zephyr startup message. However my project has no output at all. Debugging does work ok though, so I'm just using that now instead of the printk().

RE: printk no longer works in project

runsiv — Mon, 10 Jun 2024 10:58:47 GMT

Hi Scott

Could you try for example the Hello World sample and see if you see the same there? If so I would then try to disable the ESP-IDF extension just to verify that is it not affecting the nRC Connect Extension

Regards

Runar