Softdevice Extended Advertising: iOS connection

RE: Softdevice Extended Advertising: iOS connection

Simonr — Thu, 06 Nov 2025 11:01:30 GMT

As far as I know, this is yet to be fixed in the SDK, as it was more than just a patch job. It is not planned for NCS 3.2.0 either. However, I was told today when asking that this has been fixed on the iOS side in iOS 26.

Best regards,

Simon

RE: Softdevice Extended Advertising: iOS connection

JordanYates — Wed, 05 Nov 2025 04:56:25 GMT

Hi Maria,

It is almost 18 months later, and the same issue still exist on the `v3.2.0-preview2` tag, with the same reproduction steps.
The following logs just repeat several times a second.

Starting Extended Advertising
Connected (err 0x00)
Connected state!
Initiating disconnect within 5 seconds...
Disconnected, reason 0x3E 
Connection object available from previous conn. Disconnect is complete!
Remote disconnected early...
Disconnected state! Restarting advertising
Starting Extended Advertising
Connected (err 0x00)
Connected state!
Initiating disconnect within 5 seconds...
Disconnected, reason 0x3E 
Connection object available from previous conn. Disconnect is complete!
Remote disconnected early...
Disconnected state! Restarting advertising
Starting Extended Advertising
Connected (err 0x00)
Connected state!
Initiating disconnect within 5 seconds...
Disconnected, reason 0x3E 
Connection object available from previous conn. Disconnect is complete!
Remote disconnected early...
Disconnected state! Restarting advertising

To me this is basic functionality that doesn't work, is there any plan to fix this?

RE: Softdevice Extended Advertising: iOS connection

Maria Gilje — Wed, 24 Jul 2024 15:50:02 GMT

Understandable. I will keep track of the progress of this internally and I will let you know when there is a fix or if we need something more from your end.

RE: Softdevice Extended Advertising: iOS connection

JordanYates — Tue, 23 Jul 2024 07:49:30 GMT

While that PR is a workaround for the Zephyr controller, it does not resolve the issue in the Softdevice.

I would not consider this issue closed until an iPhone can reliably connect to a device using extended advertising with the Softdevice. Unless extended advertising is not a supported mode of operation for the Softdevice.

RE: Softdevice Extended Advertising: iOS connection

Maria Gilje — Tue, 23 Jul 2024 07:38:46 GMT

I can see that you got support in the Zephyr discord from this pull request.

If you are happy with that solution I will close this ticket.

BR,

Maria

RE: Softdevice Extended Advertising: iOS connection

Maria Gilje — Mon, 22 Jul 2024 15:00:32 GMT

[quote user="JordanYates"]Yes the sample operates as expected when run between a nRF52840DK and a nRF5340DK. That is not particularly relevant to my problem however, apart from proving that the sample works, and that the Softdevice can connect to another Softdevice.[/quote]

Thank you for double-checking!

I will share your report internally for some insights. I will let you know if my colleagues need more information from you. I'll get back to you by Thursday.

Best regards,

Maria

RE: Softdevice Extended Advertising: iOS connection

JordanYates — Thu, 18 Jul 2024 00:31:28 GMT

Yes the sample operates as expected when run between a nRF52840DK and a nRF5340DK. That is not particularly relevant to my problem however, apart from proving that the sample works, and that the Softdevice can connect to another Softdevice.

My problem is that a Softdevice using extended advertising cannot be connected to by an iOS device, while the Zephyr Bluetooth controller works reliably. I have attached 2 Wireshark captures of this setup, one with the Zephyr controller, one with the Softdevice controller. The Zephyr controller connects successfully on the first go (and on the majority of attempts), while the Softdevice controller has 20 attempts across 14 seconds with not a single successful connection.

zephyr_controller.pcap
softdevice_controller.pcap

RE: Softdevice Extended Advertising: iOS connection

Maria Gilje — Wed, 17 Jul 2024 14:08:51 GMT

Hello,

In the sample documentation it is stated that the sample should be tested with two boards. Have you verified that the sample works when you test as described in the sample documentation?

Best regards,

Maria