If NCS have a similar function as peer_manager.c in nRFSDK17?

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Priyanka — Fri, 06 Sep 2024 06:11:08 GMT

Hi,

Apologies for the delay. I see that you are being assisted for the same (pair and bond with static passkey) in a different ticket.

If that's the case, kindly close this ticket. 🙂

-Priyanka

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Chaoyue Ying — Mon, 02 Sep 2024 08:04:35 GMT

I want to pairing and bonding with a passkey that input at my phone or the central board,it seem defined as security level 3,But those sample such as hid_mouse use the security lecel 4 that confirm the same passkey both.I want to know how the code should be organized to arrive it.

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Priyanka — Mon, 02 Sep 2024 07:59:31 GMT

The prj.conf looks fine. Please make sure that you also set a fixed passkey in the code. Also, could you explain a bit more on what issue you face now?

-Priyanka

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Chaoyue Ying — Wed, 28 Aug 2024 00:09:45 GMT

Hi。

my prj.conf as follow:

# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause # SPDX许可证标识符:LicenseRef-Nordic-5条款# SPDX许可证标识符:LicenseRef-Nordic-5条款# SPDX许可证标识符:LicenseRef-Nordic-5条款# SPDX许可证标识符:LicenseRef-Nordic-5条款# SPDX许可证标识符:LicenseRef-Nordic-5条款# SPDX许可证标识符:LicenseRef-Nordic-5条款

CONFIG_NCS_SAMPLES_DEFAULTS=y

CONFIG_BT=y

CONFIG_BT_MAX_CONN=2

CONFIG_BT_MAX_PAIRED=2

CONFIG_BT_SMP=y

CONFIG_BT_SMP_ENFORCE_MITM=y

#
# Copyright (c) 2019 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#
CONFIG_NCS_SAMPLES_DEFAULTS=y

CONFIG_BT=y
CONFIG_BT_MAX_CONN=2
CONFIG_BT_MAX_PAIRED=2
CONFIG_BT_SMP=y
CONFIG_BT_SMP_ENFORCE_MITM=y
CONFIG_BT_FIXED_PASSKEY=y
CONFIG_BT_CENTRAL=y
CONFIG_BT_PERIPHERAL=y
CONFIG_BT_DEVICE_NAME_DYNAMIC=y
CONFIG_BT_DEVICE_APPEARANCE=962

CONFIG_BT_SCAN=y
CONFIG_BT_SCAN_FILTER_ENABLE=y
CONFIG_BT_SCAN_NAME_CNT=1
CONFIG_BT_SCAN_MANUFACTURER_DATA_CNT=1
CONFIG_BT_SCAN_WITH_IDENTITY=y
CONFIG_BT_ID_MAX=1

CONFIG_BT_EXT_ADV=y

CONFIG_BT_HIDS=y
CONFIG_BT_HIDS_MAX_CLIENT_COUNT=1
CONFIG_BT_GATT_UUID16_POOL_SIZE=12
CONFIG_BT_GATT_CHRC_POOL_SIZE=8
CONFIG_BT_HIDS_DEFAULT_PERM_RW_ENCRYPT=y

CONFIG_BT_CONN_CTX=y

CONFIG_BT_SETTINGS=y
CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_FLASH_MAP=y
CONFIG_NVS=y
CONFIG_SETTINGS=y

CONFIG_DK_LIBRARY=y

CONFIG_MPSL=y
CONFIG_MPSL_TIMESLOT_SESSION_COUNT=1

CONFIG_DM_MODULE=y
CONFIG_DM_MODULE_LOG_LEVEL_DBG=n
CONFIG_DM_GPIO_DEBUG=y
CONFIG_PWM=y

CONFIG_DM_HIGH_PRECISION_CALC=y
CONFIG_BT_DDFS=y

CONFIG_USE_SEGGER_RTT=y
CONFIG_RTT_CONSOLE=y
CONFIG_UART_CONSOLE=n

CONFIG_SERIAL=y
CONFIG_UART_ASYNC_API=y

CONFIG_BOARD_ENABLE_DCDC=n

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Priyanka — Tue, 27 Aug 2024 08:11:24 GMT

Hi,

Could you share your prj.conf?

Regards,

Priyanka

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Chaoyue Ying — Tue, 27 Aug 2024 01:10:29 GMT

Hi,

I want the user entry passkey when their phone pairing with my board and now I just realize that display passkey on phone and need confirm at two sides together.

I find this explain in LE passkey module:

The CONFIG_BT_SMP_ENFORCE_MITM option is disabled by default to allow the dongle to connect without the authentication.

I checked my prj.conf ,it is enabled.And even I use bt_passkey_set() to set a fixed passkey,It still run in this mode that confirm to bond.

RE: If NCS have a similar function as peer_manager.c in nRFSDK17?

Priyanka — Tue, 20 Aug 2024 08:31:18 GMT

Hi,

There is no direct one-to-one mapping when you transition from nRF5SDK to nRF Connect SDK. For example, you can utilise the Bluetooth LE bond module which will help to switch between peers, scan for new peers and erase Bluetooth bonds. You can also use the Zephyr Bluetooth Stack and the APIs to achieve functionality similar to the peer manager in the nRF5SDK. It has APIs which help to pair & bond, distinguish between connected devices as well as for authenticating. You can also take a look at the Google Fast Pair Integration.

Regards,

Priyanka