RE: Migration from nrf sdk 17.02 to ncs : Requesting starting point

seunghun — Mon, 02 Sep 2024 00:55:05 GMT

Hello Runar,

Thank you for advice!

I will start from nRF connect SDK Fundamentals as you mention.

Best regards,

Seunghun.

RE: Migration from nrf sdk 17.02 to ncs : Requesting starting point

runsiv — Fri, 30 Aug 2024 06:59:15 GMT

Hi Seunghun

My personal recommendation would be to start of with the nRF Connect SDK Fundamentals course we have on DevAcademy to help you get familiar with NCS. After you have at least read through it I would then take a look at our Bluetooth Low Energy course. We do have a lot of samples in Zephyr but I found it extremely helpful when I moved from bare metal programmering to Zephyr to at least read through the courses as Zephyr was unfamiliar for me. We also have a lesson in the nRF Connect SDK Intermediate that do a deeper dive into SPI.

Other then that I would suggest having a look at the following samples

Notification: Bluetooth: Peripheral UART(NUS)

SPI: Low level SPI using NRFX driver https://github.com/crfosse/ncs_projects/tree/main/peripheral_zephyr/spi

PPI PPI and https://github.com/too1/ncs-nrfx-pulse-count-example

Timers: https://github.com/too1/ncs-nrfx-timer-example

I would also suggest having a look at Developing with the nRF5340dk

Note: Some of the github links are examples made by people on tech support, they might not be up to date on NCS 2.7 but they should give you an idea at least

Regards

Runar