iOS pairing and bonding issue

RE: iOS pairing and bonding issue

Amanda Hsieh — Mon, 09 Sep 2024 16:48:04 GMT

How do you erase the board?

After testing with the Android phone, did you erase the board before programming again and then testing with iOS? If not, please do it.

RE: iOS pairing and bonding issue

user_padm — Mon, 09 Sep 2024 04:36:15 GMT

Did the same procedure,still the same issue .but for android it is working fine initiates the pairing ,connectes to the device,passkey entry the pairining and bonding will be performed.
Pair command received
Address: 40:13:56:51:ea:17
Cleared bonding info for 40:13:56:51:ea:17
Connection attempt initiated to 40:13:56:51:EA:17 (random)
Connected: 40:13:56:51:EA:17 (random)
Passkey entry requested
passkey 903881
Received string: passkey 903881
Passkey: 903881
Security changed: 40:13:56:51:EA:17 (random) level 4
Pairing completed. Bonded: 1

RE: iOS pairing and bonding issue

Amanda Hsieh — Thu, 05 Sep 2024 16:39:34 GMT

Disconnect reason 19 means that the remote user terminated the connection, so the iPhone disconnected for some reason. Could you erase the board before programming, turn off and on the Bluetooth on iOS to delete the bond information, and try again?

RE: iOS pairing and bonding issue

user_padm — Thu, 05 Sep 2024 03:41:06 GMT

Currently i don't have sniffer setup.Is there any other way I can resolve the issue?

RE: iOS pairing and bonding issue

Amanda Hsieh — Wed, 04 Sep 2024 13:03:59 GMT

Hi,

Could you provide the sniffer log to help investigate the issue?

Before starting to capture, please try to erase the board before programming and turn off and on the Bluetooth on iOS to delete the bond.

Regards,
Amanda H.