External flash identification error in nrf5340

RE: External flash identification error in nrf5340

erifat — Sat, 28 Sep 2024 16:28:34 GMT

The problem still persists. Thank you for your support. I'm waiting for your return

RE: External flash identification error in nrf5340

AHaug — Thu, 26 Sep 2024 12:13:19 GMT

I'll discuss the case with the engineer handling #333365.

Kind regards,
Andreas

RE: External flash identification error in nrf5340

erifat — Wed, 25 Sep 2024 05:04:02 GMT

Could you support me via the ticket in the link?

devzone.nordicsemi.com/.../nrf5340-and-w25q128jv-nor-flash-r-w-problem

The problem persists.

RE: External flash identification error in nrf5340

AHaug — Tue, 24 Sep 2024 06:04:17 GMT

Hi,

Apologies for the delayed response. I've been out of office for the past week and a half.

Could you provide me with your partitioning files and dts files that you've created as well as the generated partitions.yml and .dts files that you can find within build/zephyr (if your build progress get as far as generating them so they exist)?

Kind regards,
Andreas

RE: External flash identification error in nrf5340

erifat — Thu, 19 Sep 2024 12:21:28 GMT

We will continue through Nor flash

RE: External flash identification error in nrf5340

erifat — Mon, 16 Sep 2024 10:48:29 GMT

Thank you for your support. We will continue through Nor flash.I'm using the W25Q128JV model winbond flash that we have at the moment. The same problem persists during identification. What can I do at this stage.

Changed to jedec-id and size.

RE: External flash identification error in nrf5340

AHaug — Fri, 13 Sep 2024 08:28:48 GMT

I also have some other bad news. The flash you've selected, i.e W25N02KVZEIR is a SPI-NAND flash. We do not support NAND-devices with our devices. We only have support for SPI/QSPI-NOR flash devices, so the first step will unfortunately be to reevaluate the choice of external flash.

Kind regards,
Andreas

RE: External flash identification error in nrf5340

erifat — Thu, 12 Sep 2024 13:03:20 GMT

I don't understand how I should do it. We don't want to set up the partition manager right now. It can create the dimensions itself. How should I do it?

RE: External flash identification error in nrf5340

AHaug — Thu, 12 Sep 2024 12:56:11 GMT

Hi,

[quote user=""] I have made the flash definitions on v2.6.0\zephyr\boards\arm\nrf5340dk_nrf5340\nrf5340_cpuapp_common.dts.[/quote]

In this image you get a warning stating that you're using Partition Manager, which will cause .dts definitions to be ignored

Could you check if the issues persists if you're not using partition manager or if you set up your partitions using partition manager instead of dts?

Kind regards;
Andreas

RE: External flash identification error in nrf5340

erifat — Thu, 12 Sep 2024 11:16:38 GMT

# Enable Bootloader
CONFIG_BOOTLOADER_MCUBOOT=y

# Enable SMP Server
CONFIG_MCUMGR=y
CONFIG_MCUMGR_GRP_IMG=y

# CONFIG_MCUMGR_GRP_IMG dependencies
CONFIG_FLASH=y
CONFIG_IMG_MANAGER=y

# CONFIG_IMG_MANAGER dependencies
CONFIG_STREAM_FLASH=y

# CONFIG_MCUMGR dependencies
CONFIG_NET_BUF=y
CONFIG_ZCBOR=y

# Required for CONFIG_IMG_MANAGER
CONFIG_FLASH_MAP=y


CONFIG_BT=y
CONFIG_LOG=y
CONFIG_BT_SMP=y
CONFIG_BT_PERIPHERAL=y
CONFIG_BT_DIS=y
CONFIG_BT_DIS_PNP=n
CONFIG_BT_BAS=n
CONFIG_BT_HRS=n
CONFIG_SNS_SERVICE_ENABLED=y
CONFIG_ECG_SERVICE_ENABLED=y
CONFIG_PPG_SERVICE_ENABLED=y
CONFIG_MOT_SERVICE_ENABLED=y
CONFIG_COM_SERVICE_ENABLED=y
CONFIG_BT_DEVICE_NAME="Zephyr Heartrate Sensor"
CONFIG_BT_DEVICE_APPEARANCE=833
CONFIG_BT_DEVICE_NAME_DYNAMIC=y

CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU=y
CONFIG_I2C=y
CONFIG_CBPRINTF_FP_SUPPORT=y

CONFIG_GPIO=y


CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU=y

CONFIG_MCUBOOT_USE_ALL_AVAILABLE_RAM=y
CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU=y
CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU_SPEEDUP=y
CONFIG_NRF53_UPGRADE_NETWORK_CORE=y
CONFIG_UPDATEABLE_IMAGE_NUMBER=2
CONFIG_ADD_MCUBOOT_MEDIATE_SIM_FLASH_DTS=y


# Enable bonding
CONFIG_BT_SETTINGS=y

CONFIG_SETTINGS=y

CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096
CONFIG_I2C=y
CONFIG_CBPRINTF_FP_SUPPORT=y

# Enable DK LED and Buttons library
CONFIG_DK_LIBRARY=y

# This example requires more stack
CONFIG_MAIN_STACK_SIZE=1152
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Config logger


# HCI ACL buffers size
# BT_L2CAP_RX_MTU = CONFIG_BT_BUF_ACL_RX_SIZE - BT_L2CAP_HDR_SIZE
CONFIG_BT_BUF_ACL_RX_SIZE=251
CONFIG_BT_BUF_ACL_TX_SIZE=251

# L2CAP SDU/PDU TX MTU
CONFIG_BT_L2CAP_TX_MTU=247

CONFIG_BT_HCI_VS=y
CONFIG_BT_HCI_VS_EXT=y

CONFIG_SERIAL=y
CONFIG_LOG=y


# CONFIG_SHELL=y

CONFIG_LOG_CMDS=y

CONFIG_REGULATOR=y
CONFIG_SENSOR=y
CONFIG_I2C_SHELL=y
CONFIG_NRF_FUEL_GAUGE=y
CONFIG_REQUIRES_FLOAT_PRINTF=y

prj.conf