Thingy53 Wifi Station build configuration Issue

RE: Thingy53 Wifi Station build configuration Issue

Håkon Alseth — Mon, 07 Oct 2024 07:46:25 GMT

Hi Jon,

Based on the zephyr version:

-- Zephyr version: 3.5.99 (/Users/jon/Documents/smartweight_project/workspace/zephyr)

This indicates that you're on v2.6.1 or older.

Can you try running this on ncs v2.7.0 ?

Kind regards,

Håkon

RE: Thingy53 Wifi Station build configuration Issue

lunchbarker17 — Fri, 04 Oct 2024 20:59:14 GMT

Hey Hakon, absolutely.

Attached is the project.conf and the CMake Lists.txt file

devzone.nordicsemi.com/.../4403.CMakeLists.txt devzone.nordicsemi.com/.../0284.prj.conf

As for the log of the build, below is the output of my console

devzone.nordicsemi.com/.../7522.logfile.txt

Thanks Hakon,

Jon

RE: Thingy53 Wifi Station build configuration Issue

Håkon Alseth — Fri, 04 Oct 2024 12:03:42 GMT

Hi,

Can you share your full cmake configuration + build log? Are you building for NCS v2.7.0 or v2.6.2?

The WIFI_READY_LIB was not present in v2.6.1 (and older), so that might explain why you are still seeing this issue.

Kind regards,

Håkon

RE: Thingy53 Wifi Station build configuration Issue

lunchbarker17 — Thu, 03 Oct 2024 21:34:31 GMT

Hi Hakon,

The set(Shield) line was place directly after the cmake_minimum and before the find package, sadly. The error is still occurring

What I noticed was different, was the build target. My SDK is targeting the following - would this create a discrepancy?

Thanks Hakon,

Jon

RE: Thingy53 Wifi Station build configuration Issue

Håkon Alseth — Thu, 03 Oct 2024 08:45:15 GMT

Hi Jon,

This is the build cmd that vscode emits when I set the SHIELD in CMakeLists:

west build --build-dir /opt/ncs/nrf/samples/wifi/sta/build /opt/ncs/nrf/samples/wifi/sta --pristine --board thingy53/nrf5340/cpuapp --sysbuild

And this is without setting it in CMakeLists.txt, and instead add it as a parameter:

west build --build-dir /opt/ncs/nrf/samples/wifi/sta/build_1 /opt/ncs/nrf/samples/wifi/sta --pristine --board thingy53/nrf5340/cpuapp --sysbuild -- -Dsta_SHIELD=nrf7002eb

Where did you place the set(SHIELD line in your CMakeLists.txt file? It is crucial that it is placed before this line:

find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})

Kind regards,

Håkon

RE: Thingy53 Wifi Station build configuration Issue

lunchbarker17 — Wed, 02 Oct 2024 18:40:43 GMT

Hey there Hakon,

I was not building with sysbuild enabled, so I tried the following variations, all of which had varying errors:

With Sysbuild enabled and the set(SHIELD nrf7002eb) included the following error happened - attempt to assign the value 'y' to the undefined symbol WIFI_NRF700X in the sysbuild.conf
Without sysbuild enabled, and the set(SHIELD nrf7002eb) included, we run into the same error as listed above where the wifi ready lib is not being found.

Thank you,

Jon

RE: Thingy53 Wifi Station build configuration Issue

Håkon Alseth — Wed, 02 Oct 2024 08:52:41 GMT

Hi,

With sysbuild enabled, one has to add the image name, ie. -DstaSHIELD=nrf7002eb.

It is then easier to set this in your CMakeLists.txt:

#
# Copyright (c) 2022 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

cmake_minimum_required(VERSION 3.20.0)
set(SHIELD nrf7002eb)
...rest of file

Could you try this and see if that works?

Kind regards,

Håkon