Console on USB only

RE: Console on USB only

Amanda Hsieh — Thu, 10 Oct 2024 16:25:26 GMT

You can test this sample zephyr/samples/subsys/usb/console and refer to its setting.

RE: Console on USB only

BALAJI_1709 — Wed, 09 Oct 2024 11:59:59 GMT

Thanks for the response. I tried setting CONFIG_UART_CONSOLE=n in prj.conf. It disables the UART. However, it also disables log outputs on /dev/ttyACM0 (usb) port. Is there any option that disables logs on UART and prints on USB port.

Regards,

Balaji.V

RE: Console on USB only

Amanda Hsieh — Tue, 08 Oct 2024 14:51:11 GMT

Hi,

You can set CONFIG_UART_CONSOLE=n in your prj.conf file to disable UART logs. This will disable the UART console.

Regards,
Amanda H.