Missing support of PAWR on nrf6340 audio dk

RE: Missing support of PAWR on nrf6340 audio dk

CHEN YANG — Mon, 21 Oct 2024 19:16:30 GMT

Thanks. It works now.

RE: Missing support of PAWR on nrf6340 audio dk

Amanda Hsieh — Mon, 21 Oct 2024 19:03:42 GMT

Hi,

Sorry for uploading the wrong figure. I have fixed it.

Here is my test project devzone.nordicsemi.com/.../periodic_5F00_adv_5F00_rsp.7z with the configs mentioned in my previous reply.

Beware that this code/configuration is not fully tested or qualified and should be considered provided “as-is”. Please test it with your application and let me know if you find any issues.

-Amanda H.

RE: Missing support of PAWR on nrf6340 audio dk

CHEN YANG — Mon, 21 Oct 2024 18:56:25 GMT

Hi, Amando,

I still failed. I check your screen shot careful, it is obvious you are using nrf52, and I am working in nrf5340audio dk. As I said, I can make it work in nrf52dk, but failed in nrf5340audio dk.

*** Using Zephyr OS v3.6.99-100befc70c74 ***
Starting Periodic Advertising Demo
[00:00:00.276,092] <wrn> bt_hci_core: opcode 0x203a status 0x01
[00:00:00.276,123] <wrn> bt_hci_core: Controller does not support 'LE_READ_MAX_ADV_DATA_LEN'. Assuming maximum length is 31 bytes.
[00:00:00.279,937] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
[00:00:00.279,937] <inf> bt_hci_core: HW Variant: nRF53x (0x0003)
[00:00:00.279,968] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 214.51162 Build 1926957230
[00:00:00.317,321] <inf> bt_hci_core: Identity: E3:56:6A:09:47:E1 (random)
[00:00:00.317,352] <inf> bt_hci_core: HCI: version 5.4 (0x0d) revision 0x21fb, manufacturer 0x0059
[00:00:00.317,382] <inf> bt_hci_core: LMP: version 5.4 (0x0d) subver 0x21fb
[00:00:00.319,549] <wrn> bt_hci_core: opcode 0x2036 status 0x01
Failed to create advertising set (err -5)

Thanks,

Chen Yang

RE: Missing support of PAWR on nrf6340 audio dk

Amanda Hsieh — Mon, 21 Oct 2024 15:09:58 GMT

Hi,

Create sysbuild.conf to include the following configs:

SB_CONFIG_NETCORE_IPC_RADIO=y
SB_CONFIG_NETCORE_IPC_RADIO_BT_HCI_IPC=y

Create sysbuild/ipc_radio.conf to include the following configs:

CONFIG_BT_EXT_ADV=y
CONFIG_BT_PER_ADV=y
CONFIG_BT_PER_ADV_SYNC_TRANSFER_SENDER=y
CONFIG_BT_PER_ADV_RSP=y

To build with sysbuild:

You will get this log:

Regards,
Amanda H.

RE: Missing support of PAWR on nrf6340 audio dk

CHEN YANG — Mon, 21 Oct 2024 09:36:42 GMT

FYI, the same code can be comipled and run in nrf52dk without problem.