Questions about visual study code

RE: Questions about visual study code

Einar Thorsrud — Thu, 07 Nov 2024 09:35:11 GMT

Hi,

I see the same on my end. When you do a re-build the No sysbuild option is "forgoten" and not passed on to the west build command (so --no-sysbuild is missing if you look at the west build command in the beginning of the output when you do the build). I have reported the issue internally, but until it is fixed, I suggest you make a new build-configuration every time you need to do a pristine build (evne though I undertsand it is mor work and not ideal).

RE: Questions about visual study code

ozoz05 — Thu, 07 Nov 2024 02:35:50 GMT

As you said, if you run "bulid configuration", it runs normally, but if you run build again, a build error occurs as shown in the attached image.

RE: Questions about visual study code

Einar Thorsrud — Fri, 01 Nov 2024 08:58:54 GMT

Hi,

I see the same on my end. This sample has not been updated for sysbuild yet, but it builds if you opt to not use sysbuild:

RE: Questions about visual study code

ozoz05 — Fri, 01 Nov 2024 00:19:46 GMT

It does not work if you run the project from the SDK's current location without copying it.
(C:\ncs\v2.7.0\modules\hal\nordic\nrfx\samples\src\nrfx_saadc\advanced_non_blocking_internal_timer)

Below is the log when you run it.

RE: Questions about visual study code

Einar Thorsrud — Thu, 31 Oct 2024 08:51:05 GMT

[quote user="ozoz05"](.. /.. /.. /common .. /common) Where do I copy and paste the two common folders?[/quote]

These are relative paths, so it is relative to where the project reside in the SDK. (thre and one folder down).

[quote user="ozoz05"]In addition to this, common/nrfx.example.h
common/saadc_examples_common.c
These two files are also said not to be found, but they are in the common folder of the project you created.[/quote]

That is because of what we have discussed, the project includes files in other folders with relative pahts.

There are several ways to solve this:

Do not copy the project out, just run it from where it is. This will work out of the box and is what I recomend.
Copy all the folders out and keep the relative structure. This will be messy.
Copy the folders, but keep them for instance) nexts to the proejct folder, and update the project CMakeLists.txt.
Copy just the files from the two common directories in to your project source code folder.

If you do not want to use option 1, I suggest option 4 which is clean and simple.

RE: Questions about visual study code

ozoz05 — Thu, 31 Oct 2024 05:40:20 GMT

(.. /.. /.. /common .. /common) Where do I copy and paste the two common folders?

In addition to this, common/nrfx.example.h
common/saadc_examples_common.c
These two files are also said not to be found, but they are in the common folder of the project you created.

RE: Questions about visual study code

Einar Thorsrud — Wed, 30 Oct 2024 13:38:25 GMT

Hi,

I am glad to hear 1. was resolved by re-intalling.

Regarding issue 2, that is that this project is not stand-alone. If you look inside /CMakeLists.txt file, you will se that it includes two common folder located relative to this project (../../../common ../common). So just copying out the project will not work. You either need to copy out the related folders as well and place them in the same location, or in another location an dupdate the path, or run the sample from where it is lcoated in the SDK tree).

RE: Questions about visual study code

ozoz05 — Tue, 29 Oct 2024 07:29:25 GMT

1. The nRF Connect extension icon keeps disappearing, which seems to have caused problems with VS Code installing and erasing extensions.
After removing the VS Code, Code folder, and .vscode folder, I reinstalled it and the problem was resolved.

2. share the build log for the failed build

SDK Path : C:\ncs\v2.7.0

tool chain Path : C:\ncs\toolchains

project Path : C:\ncs\advanced_non_blocking_internal_timer

"C:\ncs\advanced_non_blocking_internal_timer\common"

Path has no file "common.cmake", "common.conf", "common-pinctrl.dtsi", "nrfx_example.h" or "saadc_examples_common.c", "saadc_examples_common.h", "C:\n"cs\v2.7.0\modules\hal\nordic\nrfx\samples\src\nCopy and paste from the path rfx_saadc\common".

"add configuration" run

Before the change(CMakeList.txt)

-> PROBLEMS :

-> TERMINAL :

After the change(CMakeList.txt)

-> PROBLEMS :

-> TERMINAL :

If you reply, there will be an error

I uploaded it as an image.

RE: Questions about visual study code

Einar Thorsrud — Mon, 28 Oct 2024 13:23:01 GMT

Hi,

Can you share the build log for the failed build?

RE: Questions about visual study code

ozoz05 — Fri, 25 Oct 2024 07:57:31 GMT

1 콘솔 화면을 공유하고 있습니다.

C:\ncs\v2.7.0\modules\hal\nordic\nrfx\samples\src\nrfx_saadc\advanced_non_blocking_internal_timer

The zephyr/samples/hello_world or wifi example is generated normally, C:\ncs\v2.7.0\modules\hal\nordic\nrfx\samples\src\nExample of the location of rfx_saadc\advanced_non_blocking_internal_timer has the same problem.

RE: Questions about visual study code

Einar Thorsrud — Fri, 25 Oct 2024 07:21:25 GMT

Hi,

[quote user="ozoz05"]Are you talking about this screen??[/quote]

Yes. Can you share wha tyou see there under "Console"?

[quote user="ozoz05"]It seems that only what seems to be translated using Korean extensions.[/quote]

I see. Perhaps this is the culpris. Can you disable the Korean Language extension and test again without it and see if things still fail?

[quote user="ozoz05"]1. Sample project creation location and github repository[/quote]

Can you back-track a bit and see if you are able to build a sample in tree (for instance zephyr/samples/hello_world) without copying it to a new location? If that is working we can start looking at other out of tree projects. This particular sample will not work when you copy it out, as it depends on files in a common directory (you can see the relative path to ../../../common in the projects CMakeLists.txt).

RE: Questions about visual study code

ozoz05 — Fri, 25 Oct 2024 06:11:33 GMT

1. Sample project creation location and github repository

2. Error creating configurations

RE: Questions about visual study code

ozoz05 — Fri, 25 Oct 2024 02:38:21 GMT

It seems that only what seems to be translated using Korean extensions.

RE: Questions about visual study code

ozoz05 — Fri, 25 Oct 2024 02:36:37 GMT

Are you talking about this screen??

RE: Questions about visual study code

Einar Thorsrud — Thu, 24 Oct 2024 10:23:49 GMT

Hi,

Regarding issue 1, we are having problems understanding how that could happen. Do you see anything in the developer console, under "Help > Toggle Developer Tools"?

Also, the debug information that you shared seens to be manipulated somehow? Did you do any changes to it or automatically translate part sof it or similar? I ask because there are text stings there in Korean that I would expect should always be in English.

And regarding issue 2, the sample use relative dependencies to other code (../comon/..), and when the sample is copied out, those files are not include,and will therefore not be found. I suggest bulding the sample in place in the SDK folder to avoid that issue.

RE: Questions about visual study code

ozoz05 — Thu, 24 Oct 2024 05:10:38 GMT

Hello.
About number two
I also linked it to github, and even if I copy and paste files in the common folder into the path, the configuration will not be created.
Looking at the attached image again, the CMakeList path seems to be set differently, where can I set the path?

RE: Questions about visual study code

ozoz05 — Thu, 24 Oct 2024 01:20:43 GMT

안녕하세요.
콘텐츠 1에 대해 생성된 지원 정보를 업로드합니다.

VS Code를 켰는데 위 이미지와 같이 nrf 확장 아이콘이 없어서 확장 프로그램에서 사용하지 않았습니다 -> 확장 재개 -> 클릭하여 다시 나타나고 복사합니다.

두 번째 내용에 대해 시도해 보겠습니다.

감사합니다.

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

중요: 아래 데이터에는 사용자 환경에 대한 민감한 정보나 기밀 정보가 포함될 수 있습니다.
다른 사람이 이 기능을 보는 것을 원하지 않으면 공유하기 전에 제거해야 합니다.

도움과 지원이 필요한 경우 Nordic DevZone(devzone.nordicsemi.com/)을 방문하세요.

{
"플랫폼": {
"os": "win32",
"osVersion": "Windows 11 Home",
"osKernel": "10.0.22631",
"vscode": "1.94.2",
"electron": "30.5.1",
"node": "v20.16.0"
},
"system": {
"date": "2024-10-24T01:17:34.567Z",
"vscodeRoot": "c:\\Program Files\\Microsoft VS Code\\resources\\app",
"nrfConnectForDesktopInstalled": true,
"vscodeUptime": "00:00:14",
"osUptime": "20:01:27",
"cpu": "Intel(R) Core(TM) Ultra 7 155H"
},
"workspace": {
"name": "sta",
"workspaceFile": null,
"folders": [
"\\c\\ncs\\sta"
]
},
"sdks": [
{
"version": "v2.7.0",
"path": "c:\\ncs\\v2.7.0"
},
{
"version": "v2.6.1",
"path": "c:\\ncs\\ v2.6.1"
},
{
"버전": "v2.6.0",
"경로": "c:\\ncs\\v2.6.0"
}
],
"activeBuild": "\\c\\ncs\\sta\\빌드",
"앱": [
{
"workspace": "\\c\\ncs\\sta",
"uri": "\\c\\ncs\\sta",
"buildConfigurations": [
{
"id": "\\c\\ncs\\sta\\build",
"name": "build",
"boardId": "nrf7002dk/ nrf5340/cpuapp",
"type": "Zephyr",
"isChild": false,
"isStale": false,
"taskBindings": {
"build": [],
"pristineBuild": [],
"flash": [],
"eraseAndFlash": []
}

} ]
}
],
"topdir": "c:\\ncs\\v2.7.0",
"workspaceState": "freestanding-ready",
"toolchains": [
{
"버전": "2.7.0",
"경로": "c:\\ncs\\toolchains\\ce3b5ff664"
},
{
"버전": "2.6.1",
"경로": "c:\\ncs\\toolchains\\cf2149caf2"
},
{
"버전": "2.6.0",
"경로": "c:\\ncs\\toolchains\\cf2149caf2"
}
],
"activeToolchain": {
"유형": "설치",
"경로": "c:\\ncs\\toolchains\\ce3b5ff664",
"버전": "2.7.0",
"displayName": "nRF Connect SDK 툴체인 v2.7.0"
},
"connectedDevices": [],
"deviceProvider": "nrfutil",
"도구": {
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\zephyr-sdk\\arm-zephyr-eabi\\bin\\arm-zephyr-eabi-gcc.exe": "0.16.5-1",
"C:\\프로그램 파일\\SEGGER\\JLink_V794e\\JLink.exe": "7.94e",
"C:\\프로그램 파일\\Nordic Semiconductor\\nrf-command-line-tools\\bin\\nrfjprog.exe": "10.24.2",
"C:\\ncs\\toolchains\\ce3b5ff664\\cmake": "3.21.0",
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\스크립트\\west.exe": "1.2.0",
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\python.exe": "3.9.13",
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\ninja.exe": "1.10.2",
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\ gperf.exe": "3.1",
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\dtc.exe": "1.4.7",
"C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\gn.exe": "2172",
"C:\\ncs\\toolchains\\ce3b5ff664\\mingw64\\bin\\git.exe": "2.37.3.windows.1",
"arm-gdbPath": "c:\\ncs\\toolchains\\ce3b5ff664\\opt\\zephyr-sdk\\arm-zephyr-eabi\\bin\\arm-zephyr-eabi-gdb.exe",
"riscv-gdbPath": "C:\\ncs\\toolchains\\ce3b5ff664\\opt\\zephyr-sdk\\riscv64-zephyr-elf\\bin\\riscv64-zephyr-elf-gdb.exe"
},
"nrfutil": {
"nrfutil-device": {
"버전": "2.5.0",
"binPath": "c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2024.9.87-win32-x64\\platform\\nrfutil\\bin\\nrfutil-device"
},
"nrfutil-toolchain-manager": {
"version": "0.14.4",
"binPath": "c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2024.9.87-win32-x64\\platform\\nrfutil\\bin\\nrfutil-toolchain-manager"
}
},
" environment": {
"westEnv": {
"HOME": "C:\\Users\\Oz",
"HOMEDRIVE": "C:",
"HOMEPATH": "\\Users\\Oz",
"PATH": "C:\\ncs\\toolchains\\ce3b5ff664; C:\\ncs\\툴체인\\ce3b5ff664\\mingw64\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\bin\\스크립트; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\nanopb\\발전기-bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\zephyr-sdk\\aarch64-zephyr-elf\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\zephyr-sdk\\x86_64-zephyr-elf\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\zephyr-sdk\\arm-zephyr-eabi\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\zephyr-sdk\\riscv64-zephyr-elf\\bin; c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2024.9.87-win32-x64\\platform\\nrfutil\\lib\\nrfutil-toolchain-manager; C:\\프로그램 파일(x86)\\NVIDIA Corporation\\PhysX\\common; C:\\윈도우\\시스템32; C:\\윈도우; C:\\Windows\\System32\\Wbem입니다. C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\; C:\\Windows\\System32\\OpenSSH\\; C:\\프로그램 파일\\반디집\\; C:\\프로그램 파일\\dotnet\\; C:\\프로그램 파일\\노르딕 세미컨덕터\\nrf-command-line-tools\\bin\\; C:\\프로그램 파일(x86)\\Windows 키트\\8.1\\Windows 성능 툴킷\\; C:\\파이썬\\스크립트\\; C:\\파이썬\\; C:\\Users\\Oz\\AppData\\Local\\Programs\\Python\\Launcher\\; C:\\Users\\Oz\\AppData\\Local\\Microsoft\\WindowsApps;; C:\\Users\\Oz\\AppData\\Local\\afreeca입니다. C:\\사용자\\Oz\\AppData\\로컬\\SOOP; C:\\Program Files\\Microsoft VS Code\\bin",
"ZEPHYR_BASE": "c:\\ncs\\v2.7.0\\zephyr",
"ZEPHYR_TOOLCHAIN_VARIANT": "zephyr",
"ZEPHYR_SDK_INSTALL_DIR": "C:\\ncs\\toolchains\\ce3b5ff664\\opt\\zephyr-sdk",
"PYTHONPATH": "C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin; C:\\ncs\\툴체인\\ce3b5ff664\\opt\\bin\\Lib; C:\\ncs\\toolchains\\ce3b5ff664\\opt\\bin\\Lib\\site-packages"
},
"inherited": {
"HOME": "C:\\Users\\Oz",
"HOMEDRIVE": "C:",
"HOMEPATH": "\\Users\\Oz",
"path": "C:\\Program Files (x86)\\NVIDIA Corporation\\PhysX\\Common; C:\\윈도우\\시스템32; C:\\윈도우; C:\\Windows\\System32\\Wbem입니다. C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\; C:\\Windows\\System32\\OpenSSH\\; C:\\프로그램 파일\\반디집\\; C:\\프로그램 파일\\dotnet\\; C:\\프로그램 파일\\노르딕 세미컨덕터\\nrf-command-line-tools\\bin\\; C:\\프로그램 파일(x86)\\Windows 키트\\8.1\\Windows 성능 툴킷\\; C:\\파이썬\\스크립트\\; C:\\파이썬\\; C:\\사용자\\Oz\\AppData\\로컬\\P로그램\\파이썬\\런처\\; C:\\Users\\Oz\\AppData\\Local\\Microsoft\\WindowsApps;; C:\\Users\\Oz\\AppData\\Local\\afreeca입니다. C:\\사용자\\Oz\\AppData\\로컬\\SOOP; C:\\Program Files\\Microsoft VS Code\\bin",
"PATH": "C:\\Program Files (x86)\\NVIDIA Corporation\\PhysX\\Common; C:\\윈도우\\시스템32; C:\\윈도우; C:\\Windows\\System32\\Wbem입니다. C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\; C:\\Windows\\System32\\OpenSSH\\; C:\\프로그램 파일\\반디집\\; C:\\프로그램 파일\\dotnet\\; C:\\프로그램 파일\\노르딕 세미컨덕터\\nrf-command-line-tools\\bin\\; C:\\프로그램 파일(x86)\\Windows 키트\\8.1\\Windows 성능 툴킷\\; C:\\파이썬\\스크립트\\; C:\\파이썬\\; C:\\Users\\Oz\\AppData\\Local\\Programs\\Python\\Launcher\\; C:\\Users\\Oz\\AppData\\Local\\Microsoft\\WindowsApps;; C:\\Users\\Oz\\AppData\\Local\\afreeca입니다. C:\\사용자\\Oz\\AppData\\로컬\\SOOP; C:\\Program Files\\Microsoft VS Code\\bin"
}
},
"terminal": {
"defaultProfile": null
},
"config": {
"nordic-semiconductor.nrf-connect": {
"topdir": "${nrf-connect.sdk:2.7.0}",
"toolchain": {
"path": "${nrf-connect.toolchain:2.7.0}"
},
"ozonePath": "",
"applications": [],
"applicationOptions": {},
"kconfig": {
"interface": "kconfig"
},
"west": {
"env": {
"$base": "terminal"
}
},
"boardRoots": [
"c:\\ncs",
"c:\\Workspace\\Nordic"
],
"taskBindings": {},
"buildTerminal": {
"condensedProgress": true
},
"debugging": {
"flash": true,
"bindings": {},
"justMyCode": true
},
"activeAppFollowActiveEditor": true,
"deviceProvider": "nrfutil",
"flash": {
"softreset": false,
"erase": false,
"recover": false
},
"enableTelemetry": true,
"thirdpartyIntegration": {},
"toolchainManager": {
"indexURL": null,
"installDirectory": null
},
"nrfutil": {
"home": null
},
"defaultOpenAction": "ask"
},
"nordic-semiconductor.nrf-terminal": {
"terminalMode": "character"
},
"marus25.cortex-debug": {
"variableUseNaturalFormat": true,
" liveWatchRefreshRate": "300",
"armToolchainPath": null,
"armToolchainPrefix": "arm-none-eabi",
"gdbPath": null,
"objdumpPath": null,
"JLinkGDBServerPath": null,
"openocdPath": null,
"pyocdPath": null,
"PEGDBServerPath": null,
"stutilPath": null,
"stlinkPath": null,
"stm32cubeprogrammer": null,
"enableTelemetry": true,
"dbgServerLogfile": null
}
},
"extensions": {
"internal": {
"nordic-semiconductor.nrf-connect": {
"버전": "2024.9.87",
"경로": "c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-connect-2024.9.87-win32-x64",
"isActive": true
},
"nordic-semiconductor.nrf-terminal": {
"version": "2024.9.14",
"path": "c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-terminal-2024.9.14",
"isActive": true
},
"nordic-semiconductor.nrf-devicetree": {
"버전": "2024.9.26",
"경로": "c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-devicetree-2024.9.26",
"isActive": true
},
"nordic-semiconductor.nrf-kconfig": {
"버전": "2024.9.20",
"경로": "c:\\Users\\Oz\\.vscode\\extensions\\nordic-semiconductor.nrf-kconfig-2024.9.20",
"isActive": true
}
},
" 외부": {
"marus25.cortex-debug": "1.12.1",
"ms-vscode.cpptools": "1.22.10",
"ms-vscode.js-debug": "1.94.0",
"ms-vscode.js-debug-companion": "1.1.3",
"ms-vscode.vscode-js-profile-table": "1.0.10",
"DavidAnson.vscode-markdownlint": "0.56.0",
"GitHub.copilot": "1.242.0",
"GitHub.copilot-chat": "0.21.2",
" mcu-debug.debug-tracker-vscode": "0.0.15",
"mcu-debug.memory-view": "0.0.25",
"mcu-debug.peripheral-viewer": "1.4.6",
"mcu-debug.rtos-views": "0.0.7",
"MS-CEINTL.vscode-language-pack-ko": "1.94.2024101609",
"ms-vscode.cmake-tools": "1.19.52",
"ms-vscode.cpptools-extension-pack": "1.3.0",
"ms-vscode.makefile-tools": "0.11.13",
" ms-vscode.vscode-serial-monitor": "0.13.1",
"trond-snekvik.gnu-mapfiles": "1.1.0",
"twxs.cmake": "0.0.17"
}
}
}

RE: Questions about visual study code

Einar Thorsrud — Wed, 23 Oct 2024 12:17:00 GMT

Hi,

[quote user=""]1. The left nrf icon in the attached image continues to disappear.
Whenever it disappears, if you remove it from the extension and restart the extension, the icon reappears, but if you turn off vs code and turn it back on, it disappears again.[/quote]

I have not found any other reports of this. Can you say more about what you do when the icond disappears? Also, can you generate and upload the support intormation here?

[quote user=""]2 create a new application does not create when you import a sample from the module directory and create a build configuration.[/quote]

I suspect you are seeing these issues because you do not have git installed and/or have not configured it fully, as described in this post. You can either do that, or as a workaround copy the sample manually, or run it in place (without making a copy).