[nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Mon, 28 Oct 2024 13:00:46 GMT

I have additional questions.

[quote userid="2115" url="~/f/nordic-q-a/115830/nrf-9160dk-nrf7002dk-wifi-scan-in-nrf9160dk/508126"]Yes, there is not enough RAM available to run other Wi-Fi operations than scanning on the nRF9160.[/quote]

I was able to see the following in the link you sent.

Wi-Fi feature support

From what I understand, if RAM is an issue, I think it can be done by lightening the code. However, in the case of the nRF9160, it was understood that it does not support functions other than WiFi scanning, regardless of memory.

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

Håkon Alseth — Mon, 28 Oct 2024 12:03:11 GMT

Hi,

No, there is no nRF91xx device available that has more RAM.

Here is the officially supported features listed in a table:

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/releases_and_maturity/software_maturity.html#wi-fi_feature_support

Kind regards,

Håkon

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Mon, 28 Oct 2024 11:54:29 GMT

If so, is it possible to add additional RAM?

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

Håkon Alseth — Mon, 28 Oct 2024 11:48:06 GMT

I am glad to hear that you found the root cause.

[quote user="DDYD1"]In the ticket above, I saw that the connections between the nRF9160DK and the nRF7002EK said that they could detect Wifi, but could not send data. Is that still the case?[/quote]

Yes, there is not enough RAM available to run other Wi-Fi operations than scanning on the nRF9160.

Kind regards,

Håkon

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Mon, 28 Oct 2024 11:19:53 GMT

I found the problem.

The connection between the two boards was faulty with the line corresponding to the IRQ. When I replaced the wire, I was able to get the Wifi signal normally.

And I have additional questions.

Wifi connection on nrf9160dk with nrf7002ek

In the ticket above, I saw that the connections between the nRF9160DK and the nRF7002EK said that they could detect Wifi, but could not send data. Is that still the case?

My goal is to eventually use LTE and WiFi to transmit data. LTE and WiFi are not used at the same time, and WiFi is disabled when LTE is connected.

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Mon, 28 Oct 2024 08:36:28 GMT

I supplied the power as shown in the picture above.

After that, the command was used to clear the nrf53 inside and proceed.

it failed, but I got a different result.

Now I think both boards are powered on. But I still get a Timeout error related to UMAC init. Is there anything else I can do?

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

Håkon Alseth — Mon, 28 Oct 2024 07:23:01 GMT

Hi,

[quote user="DDYD1"]

1. Is UMAC's role related to the MAC address I think is needed for the Wifi connection?

[/quote]

No, it is the universal medium access control, which is also mentioned in the product specification.

It is basically the firmware running on the nRF7002 that the host controller is trying to interface. The errors are printed because the nRF9160 is unable to communicate with the 7002 device.

[quote user="DDYD1"]2. Is UMAC stored in the same place as the flash memory of nRF7002DK?[/quote]

It is running on the nRF700x device, but it is interfaced from the host controller, as shown here (picture from the PS):

[quote user="DDYD1"]I do likte this but still can't work [/quote]

You need both kits powered when doing this, and you need to erase the firmware running on the nRF5340 host controller, located on the nRF7002-DK.

This is done by using nrfjprog:

nrfjprog -e -f nrf53

Kind regards,

Håkon

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Mon, 28 Oct 2024 06:41:36 GMT

It seems that the 7002DK is not powered on from the existing connection. When I used USB to power it, it failed, but I got a different result.

Error changed from existing Boot_sig check failed to UMAC init timeout.

Two questions arise.

1. Is UMAC's role related to the MAC address I think is needed for the Wifi connection?

2. Is UMAC stored in the same place as the flash memory of nRF7002DK?

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Mon, 28 Oct 2024 03:28:16 GMT

I do likte this but still can't work

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

Håkon Alseth — Fri, 25 Oct 2024 12:50:42 GMT

Hi,

Sorry, I should have given a better explanation on the solder bridges. They should look like this:

Kind regards,

Håkon

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

DDYD1 — Fri, 25 Oct 2024 08:42:24 GMT

Soldered sb25 and sb20.

It is the form of the wire which I connected

RE: [nRF 9160DK, nRF7002DK] Wifi scan in nRF9160DK

Håkon Alseth — Fri, 25 Oct 2024 08:29:57 GMT

Hi,

Did you also solder the solder bridges as explained in this post?

RE: Connecting nRF9160DK and nRF7002DK for testing SCAN sample.

Can you share a picture of your setup?

Kind regards,

Håkon