Setting socket option RAI_NO_DATA gives ERROR

RE: Setting socket option RAI_NO_DATA gives ERROR

dejans — Mon, 04 Nov 2024 11:33:18 GMT

Hi,

nrf_socket.h specifies that the socket needs to be connected.

/** Indicate that the application does not intend to send more data.
 *  This applies immediately and lets the modem exit connected mode more
 *  quickly.
 *
 *  @note This requires the socket to be connected.
 */
#define NRF_RAI_NO_DATA 1

Best regards,
Dejan

RE: Setting socket option RAI_NO_DATA gives ERROR

mnjLC — Sat, 02 Nov 2024 04:50:44 GMT

Below is the full list of AT commands

AT+SSRDA=0,1,1
AT%XSYSTEMMODE=0,1,1,2
at%xbandlock=1,"10000"
at+cfun=1
at+cereg?
at+cgdcont?
at%rai=1
at#XSOCKET=2,2,0,0
at#XSOCKETOPT=1,61,1

We are trying to do this because we want to release RRC in certain corner cases where we do not have any data to send but for some reason RRC connected.

Thanks!

RE: Setting socket option RAI_NO_DATA gives ERROR

dejans — Thu, 31 Oct 2024 13:51:06 GMT

Hi,

Can you provide full list of AT commands that you used including the responses?

Best regards,
Dejan