nrf52833 ble dfu and FOTA how to start IN Zephyr RTOS?

RE: nrf52833 ble dfu and FOTA how to start IN Zephyr RTOS?

M.Praveen — Tue, 26 Nov 2024 05:10:32 GMT

Hi Andreas

Thanks for Reply,

Ok, I studing the FOTA in Academy. If i have any doubts i will ask the devzone.

Regards
Praveen M

RE: nrf52833 ble dfu and FOTA how to start IN Zephyr RTOS?

AHaug — Fri, 22 Nov 2024 14:38:41 GMT

Hi Praveen

Please go through the DFU course once more, and if you're having issues you can go through lesson 2 as well in the intermediate course to see how to do some debugging.

In general you will have to do some work to understand the contents of the course to some better extent to see where it's gone wrong.

If you're still struggling after this, then you can upload the build and/or device logs, prj.conf and relevant other information about your setup.

Kind regards,
Andreas

RE: nrf52833 ble dfu and FOTA how to start IN Zephyr RTOS?

M.Praveen — Fri, 22 Nov 2024 13:20:06 GMT

Hai,
Thank you for reply,

I am studied the course for FOTA Basics and i work the ble communiaction but i upload the update program firmware but not get the output.

Regards,
Praveen M

RE: nrf52833 ble dfu and FOTA how to start IN Zephyr RTOS?

AHaug — Fri, 22 Nov 2024 09:42:40 GMT

Hi,

Please have a look at our academy course https://academy.nordicsemi.com/

Here you will find the Fundamentals nRF Connect SDK Course which will teach you the basics, as well as the Intermediate course which contains a lesson with tutorial for DFU and FOTA

Kind regards,
Andreas