simple gpio to control external FEM in NCS 2.7.0 & nrf5340

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Fri, 28 Feb 2025 02:12:55 GMT

[quote userid="106736" url="~/f/nordic-q-a/119350/simple-gpio-to-control-external-fem-in-ncs-2-7-0-nrf5340/525110"]I do not get those warnings when I run the sample on my side, hmm.[/quote]

Hi Sigurd Hellesvik variant
I see why I could see lots of warnnings in hci_core.c, I modified the code in function bt_hci_cmd_send_sync() as below to avoid the ASSERT and chip reset

You know af first I always see chip is reset by BT_ASSERT_MSG(err == 0, "command opcode 0x%04x timeout with err %d", opcode, err);

so I changed BT_ASSERT_MSG to LOG_WRN.

But anyway, there is TIMEOUT FATAL error in NCS 2.7.0 for HCI command communication. that will cause chip reset.

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

variant — Thu, 27 Feb 2025 15:34:45 GMT

[quote userid="91263" url="~/f/nordic-q-a/119350/simple-gpio-to-control-external-fem-in-ncs-2-7-0-nrf5340/524887"]Also, did you enable CONFIG_LOG=y and CONFIG_BT_LOG_LEVEL_DBG=y so as to be able to see the warnings lincoln-lu showed in his log?[/quote]

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

Sigurd Hellesvik — Thu, 27 Feb 2025 15:11:08 GMT

[quote user="variant"]Shouldn't we able to get this to work without sysbuild when using NCS 2.7?[/quote]

Yes you should.

I was confused because the sysbuild/ folder was there as a leftover after I had used v2.9.0 before.

[quote user="lincoln-lu"]although there are still lots of timeout WARNINGs in bt_hci_core: bt_hci_cmd_send_sync ? Question again, are these warning expected?[/quote]

I do not get those warnings when I run the sample on my side, hmm.

Do you by chance have a DK that you can also try the sample on? Just to compare

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Thu, 27 Feb 2025 02:49:10 GMT

Well, I swicthed to use child-parent building method for the same project, the UART log are the same: tx power seems beit got/set succussfully although there are still lots of timeout WARNINGs in bt_hci_core: bt_hci_cmd_send_sync ? Question again, are these warning expected?

*** Booting nRF Connect SDK v2.7.0-5cb85570ca43 ***
*** Using Zephyr OS v3.6.99-100befc70c74 ***
Starting Dynamic Tx Power Beacon Demo
Get Tx power level ->[00:00:00.269,561] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c03 timeout with err 0
--- 8 messages dropped ---
[00:00:00.275,451] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2018 timeout with err 0
[00:00:00.276,062] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2018 timeout with err 0
[00:00:00.278,594] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c33 timeout with err 0
[00:00:00.278,961] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c31 timeout with err 0
[00:00:00.279,327] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2003 timeout with err 0
[00:00:00.279,693] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2002 timeout with err 0
[00:00:00.280,090] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x201c timeout with err 0
[00:00:00.280,456] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x202f timeout with err 0
[00:00:00.280,822] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2024 timeout with err 0
[00:00:00.281,188] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2001 timeout with err 0
[00:00:00.281,555] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c01 timeout with err 0
[00:00:00.281,921] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc01 timeout with err 0
[00:00:00.281,951] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
[00:00:00.281,982] <inf> bt_hci_core: HW Variant: nRF53x (0x0003)
[00:00:00.282,012] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 214.51162 Build 1926957230
[00:00:00.282,409] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc02 timeout with err 0
[00:00:00.282,775] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x1009 timeout with err 0
[00:00:00.283,142] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc09 timeout with err 0
[00:00:00.283,538] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2005 timeout with err 0
[00:00:00.283,691] <inf> bt_hci_core: Identity: F2:D1:8F:D5:69:8A (random)
[00:00:00.283,721] <inf> bt_hci_core: HCI: version 5.4 (0x0d) revision 0x21fb, manufacturer 0x0059
[00:00:00.283,752] <inf> bt_hci_core: LMP: version 5.4 (0x0d) subver 0x21fb
Bluetooth initialized
[00:00:00.284,210] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2006 timeout with err 0
[00:00:00.284,606] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2008 timeout with err 0
[00:00:00.285,003] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2009 timeout with err 0
[00:00:00.285,583] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x200a timeout with err 0
Dynamic Tx power Beacon started
Set Tx power level to 4
[00:00:05.270,446] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: 3
Get Tx power level -> [00:00:10.270,965] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
TXP = 3
Set Tx power level to 0
[00:00:10.271,453] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: 0
Get Tx power level -> [00:00:15.272,003] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
TXP = 0
Set Tx power level to -3
[00:00:15.272,430] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: -3
Get Tx power level -> [00:00:20.272,979] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
TXP = -3
Set Tx power level to -8
[00:00:20.273,406] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: -8
Get Tx power level -> [00:00:25.273,925] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
TXP = -8
Set Tx power level to -15
[00:00:25.274,353] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: -16
Get Tx power level -> [00:00:30.274,871] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
TXP = -16
Set Tx power level to -18
[00:00:30.275,299] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: -20
Get Tx power level -> [00:00:35.275,817] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0
TXP = -20
Set Tx power level to -23
[00:00:35.276,245] <wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0
Actual Tx Power: -40

I am thinking why the firmware of last child-parent build failed to get/set tx power.

Please note that: the only change I made this time is: I renamed child_image/hci_rpmsg.conf -> child_image/hci_ipc.conf under folder C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctr.

so I guess the 2.7.0 building script is looking for hci_ipc.conf, instead of hci_rpmsg.conf, because in NCS 2.7.0 hci_rpmgs has been renamed to hci_ipc by Zephyr, so it failed to find it and thus CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL was not set finally.
so this should be an issue in NCS 2.7.0.

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Thu, 27 Feb 2025 01:57:17 GMT

Sigurd Hellesvik
You know, in C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctrl folder, there is no sysbuild.conf or Kconfig.sysbuild.
so in order make it support sysbuild, I add these two files manually, as below:

Here is the sysbuild.conf that was added by me:

#
# Copyright (c) 2024 Nordic Semiconductor
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

SB_CONFIG_NETCORE_HCI_IPC=y

And here is the Kconfig.sysbuild that was added by me, please note I set CONFIG_NRF_DEFAULT_BLUETOOTH=y to use "zephyr\samples\bluetooth\hci_ipc" for net core, isntead of the new ipc_radio firmware from Nordic.

#
# Copyright (c) 2023 Nordic Semiconductor
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

source "${ZEPHYR_BASE}/share/sysbuild/Kconfig"

config NRF_DEFAULT_BLUETOOTH
	default y

Besides, I aslo copied sysbuild/hci_rpmsg.conf -> sysbuild/hci_ipc.conf as you said above,

By these changes, the sysbuild will generate hci_ipc for net core and hci_pwr_ctrl for app core as below:

Here is the uart log of 5340DK, does it mean tx power is get/set succussfully although there are still lots of timeout WARNINGs in bt_hci_core: bt_hci_cmd_send_sync ? Are these warning expected?

*** Booting nRF Connect SDK v2.7.0-5cb85570ca43 ***
*** Using Zephyr OS v3.6.99-100befc70c74 ***
Starting Dynamic Tx Power Beacon Demo
Get Tx power level ->[00:00:00.269,561] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c03 timeout with err 0^[[0m
^[[1;31m--- 8 messages dropped ---
^[[0m[00:00:00.275,482] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2018 timeout with err 0^[[0m
[00:00:00.276,062] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2018 timeout with err 0^[[0m
[00:00:00.278,625] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c33 timeout with err 0^[[0m
[00:00:00.278,991] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c31 timeout with err 0^[[0m
[00:00:00.279,357] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2003 timeout with err 0^[[0m
[00:00:00.279,724] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2002 timeout with err 0^[[0m
[00:00:00.280,090] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x201c timeout with err 0^[[0m
[00:00:00.280,456] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x202f timeout with err 0^[[0m
[00:00:00.280,853] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2024 timeout with err 0^[[0m
[00:00:00.281,219] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2001 timeout with err 0^[[0m
[00:00:00.281,585] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x0c01 timeout with err 0^[[0m
[00:00:00.281,951] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc01 timeout with err 0^[[0m
[00:00:00.281,982] ^[[0m<inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)^[[0m
[00:00:00.282,012] ^[[0m<inf> bt_hci_core: HW Variant: nRF53x (0x0003)^[[0m
[00:00:00.282,012] ^[[0m<inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 214.51162 Build 1926957230^[[0m
[00:00:00.282,409] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc02 timeout with err 0^[[0m
[00:00:00.282,806] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x1009 timeout with err 0^[[0m
[00:00:00.283,172] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc09 timeout with err 0^[[0m
[00:00:00.283,569] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2005 timeout with err 0^[[0m
[00:00:00.283,691] ^[[0m<inf> bt_hci_core: Identity: F2:D1:8F:D5:69:8A (random)^[[0m
[00:00:00.283,752] ^[[0m<inf> bt_hci_core: HCI: version 5.4 (0x0d) revision 0x21fb, manufacturer 0x0059^[[0m
[00:00:00.283,782] ^[[0m<inf> bt_hci_core: LMP: version 5.4 (0x0d) subver 0x21fb^[[0m
Bluetooth initialized
[00:00:00.284,210] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2006 timeout with err 0^[[0m
[00:00:00.284,637] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2008 timeout with err 0^[[0m
[00:00:00.285,034] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x2009 timeout with err 0^[[0m
[00:00:00.285,583] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0x200a timeout with err 0^[[0m
Dynamic Tx power Beacon started
Set Tx power level to 4
[00:00:05.270,507] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: 3
Get Tx power level -> [00:00:10.270,996] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = 3
Set Tx power level to 0
[00:00:10.271,545] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: 0
Get Tx power level -> [00:00:15.272,094] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = 0
Set Tx power level to -3
[00:00:15.272,521] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -3
Get Tx power level -> [00:00:20.273,040] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = -3
Set Tx power level to -8
[00:00:20.273,468] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -8
Get Tx power level -> [00:00:25.273,986] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = -8
Set Tx power level to -15
[00:00:25.274,414] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -16
Get Tx power level -> [00:00:30.274,932] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = -16
Set Tx power level to -18
[00:00:30.275,360] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -20
Get Tx power level -> [00:00:35.275,878] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = -20
Set Tx power level to -23
[00:00:35.276,306] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -40
Get Tx power level -> [00:00:40.276,794] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = -40
Set Tx power level to -30
[00:00:40.277,252] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -40
Get Tx power level -> [00:00:45.277,770] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = -40
Set Tx power level to 4
[00:00:45.278,198] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: 3
Get Tx power level -> [00:00:50.278,686] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = 3
Set Tx power level to 0
[00:00:50.279,144] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: 0
Get Tx power level -> [00:00:55.279,663] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0f timeout with err 0^[[0m
TXP = 0
Set Tx power level to -3
[00:00:55.280,090] ^[[1;33m<wrn> bt_hci_core: bt_hci_cmd_send_sync: command opcode 0xfc0e timeout with err 0^[[0m
Actual Tx Power: -3

Meanwhile I will try this without sysbuild, i.e. using the old child-parent building method under NCS 2.7.0, as variant mentioned.

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

variant — Wed, 26 Feb 2025 16:04:35 GMT

Shouldn't we able to get this to work without sysbuild when using NCS 2.7?

Also, did you enable CONFIG_LOG=y and CONFIG_BT_LOG_LEVEL_DBG=y so as to be able to see the warnings lincoln-lu showed in his log?

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

Sigurd Hellesvik — Wed, 26 Feb 2025 15:25:35 GMT

The sample seems to work with Sysbuild and the following changes:

sysbuild.conf:

SB_CONFIG_NETCORE_HCI_IPC=y

Copied sysbuild/hci_rpmsg.conf -> sysbuild/hci_ipc.conf

Perhaps you need to rename the file similarly for child_image/ without sysbuild?

My logs:

*** Booting nRF Connect SDK v2.7.0-5cb85570ca43 ***
*** Using Zephyr OS v3.6.99-100befc70c74 ***
Starting Dynamic Tx Power Beacon Demo
Get Tx power level ->-> default TXP = 0
[00:00:00.425,262] <inf> bt_hci_core: HW Platform: Nordic Semiconductor (0x0002)
[00:00:00.425,292] <inf> bt_hci_core: HW Variant: nRF53x (0x0003)
[00:00:00.425,323] <inf> bt_hci_core: Firmware: Standard Bluetooth controller (0x00) Version 214.51162 Build 1926957230
[00:00:00.426,971] <inf> bt_hci_core: Identity: C2:E3:54:B9:1D:F0 (random)
[00:00:00.427,001] <inf> bt_hci_core: HCI: version 5.4 (0x0d) revision 0x21fb, manufacturer 0x0059
[00:00:00.427,032] <inf> bt_hci_core: LMP: version 5.4 (0x0d) subver 0x21fb
Bluetooth initialized
Dynamic Tx power Beacon started
Set Tx power level to 4
Actual Tx Power: 3
Get Tx power level -> TXP = 3
Set Tx power level to 0
Actual Tx Power: 0
Get Tx power level -> TXP = 0
Set Tx power level to -3
Actual Tx Power: -3
Get Tx power level -> TXP = -3
Set Tx power level to -8
Actual Tx Power: -8
Get Tx power level -> TXP = -8
Set Tx power level to -15
Actual Tx Power: -16
Get Tx power level -> TXP = -16
Set Tx power level to -18
Actual Tx Power: -20
Get Tx power level -> TXP = -20
Set Tx power level to -23
Actual Tx Power: -40

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Wed, 26 Feb 2025 15:20:09 GMT

I realize "# CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL is not set" in this .config file, which is generated from C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_ipc\prj.conf. Should this config be set y?

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Wed, 26 Feb 2025 15:17:12 GMT

No, I did not change anything, it is the AS-IS sample code

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

Sigurd Hellesvik — Wed, 26 Feb 2025 14:31:09 GMT

[quote user=""]In oder to simplify the problem, I tried the NCS sample code under C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctrl on 5340DK, because in this sample, application code is also sending HCI cmd to net core to get/set RF power[/quote]

Did you make any changes to the sample before testing it?

Regards,
Sigurd Hellesvik

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Wed, 26 Feb 2025 14:24:14 GMT

And here is the generated .config file for app core, under C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctrl\build\zephyr

# CONFIG_INPUT is not set
# CONFIG_WIFI is not set
# CONFIG_MIPI_DSI is not set
# CONFIG_MODEM is not set
# CONFIG_UART_INTERRUPT_DRIVEN is not set
# CONFIG_SPI is not set
CONFIG_BT_HCI_ACL_FLOW_CONTROL=y
CONFIG_BT_HCI_VS=y
CONFIG_FLASH_LOAD_SIZE=0
CONFIG_SRAM_SIZE=448
CONFIG_FLASH_LOAD_OFFSET=0
CONFIG_MBOX_NRFX_IPC=y
CONFIG_HEAP_MEM_POOL_ADD_SIZE_BOARD=4096
# CONFIG_BT_CTLR is not set
CONFIG_NUM_IRQS=69
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32768
CONFIG_FLASH_SIZE=1024
CONFIG_FLASH_BASE_ADDRESS=0x0
CONFIG_MP_MAX_NUM_CPUS=1
CONFIG_PLATFORM_SPECIFIC_INIT=y
CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768
CONFIG_ROM_START_OFFSET=0
CONFIG_PINCTRL=y
CONFIG_BUILD_OUTPUT_BIN=y
CONFIG_XIP=y
CONFIG_MAIN_STACK_SIZE=1024
CONFIG_IDLE_STACK_SIZE=320
CONFIG_HAS_FLASH_LOAD_OFFSET=y
# CONFIG_SRAM_VECTOR_TABLE is not set
CONFIG_CPU_HAS_ARM_MPU=y
# CONFIG_COUNTER is not set
# CONFIG_SHARED_INTERRUPTS is not set
# CONFIG_PM_DEVICE is not set
# CONFIG_BT_STM32WBA is not set
CONFIG_TICKLESS_KERNEL=y
# CONFIG_BT_USER_PHY_UPDATE is not set
CONFIG_CLOCK_CONTROL_INIT_PRIORITY=30
# CONFIG_USE_DT_CODE_PARTITION is not set
# CONFIG_FPU is not set
CONFIG_HW_STACK_PROTECTION=y
# CONFIG_CODE_DATA_RELOCATION_SRAM is not set
CONFIG_SERIAL_INIT_PRIORITY=50
CONFIG_GPIO=y
CONFIG_SERIAL=y
# CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set
CONFIG_TINYCRYPT=y
# CONFIG_MBEDTLS is not set
# CONFIG_MEMC is not set
CONFIG_KERNEL_ENTRY="__start"
# CONFIG_MULTI_LEVEL_INTERRUPTS is not set
# CONFIG_DYNAMIC_INTERRUPTS is not set
# CONFIG_CACHE is not set
CONFIG_LOG=y
# CONFIG_CODE_DATA_RELOCATION is not set
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024
CONFIG_DCACHE_LINE_SIZE=32
CONFIG_GEN_IRQ_VECTOR_TABLE=y
CONFIG_SOC="nrf5340"
# CONFIG_RESET is not set
CONFIG_ARCH_SW_ISR_TABLE_ALIGN=4
CONFIG_NRF_RTC_TIMER=y
CONFIG_IPC_SERVICE_BACKEND_RPMSG_SHMEM_RESET=y
CONFIG_LOG_DOMAIN_NAME=""
CONFIG_BUILD_OUTPUT_HEX=y
CONFIG_CLOCK_CONTROL=y
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y
CONFIG_SOC_HAS_TIMING_FUNCTIONS=y
# CONFIG_UART_USE_RUNTIME_CONFIGURE is not set
# CONFIG_SYSCON is not set
CONFIG_GEN_ISR_TABLES=y
CONFIG_GEN_IRQ_START_VECTOR=0
CONFIG_GEN_SW_ISR_TABLE=y
CONFIG_SRAM_OFFSET=0
# CONFIG_REBOOT is not set
# CONFIG_POWER_DOMAIN is not set
CONFIG_CONSOLE=y
CONFIG_SOC_SERIES="nrf53"
CONFIG_ARCH_IRQ_VECTOR_TABLE_ALIGN=4
CONFIG_ISR_STACK_SIZE=2048
# CONFIG_SCHED_CPU_MASK is not set
# CONFIG_WATCHDOG is not set
CONFIG_ICACHE_LINE_SIZE=32
CONFIG_PRIVILEGED_STACK_SIZE=1024

#
# Devicetree Info
#
CONFIG_DT_HAS_ARDUINO_UNO_ADC_ENABLED=y
CONFIG_DT_HAS_ARDUINO_HEADER_R3_ENABLED=y
CONFIG_DT_HAS_ARM_ARMV8M_ITM_ENABLED=y
CONFIG_DT_HAS_ARM_ARMV8M_MPU_ENABLED=y
CONFIG_DT_HAS_ARM_CORTEX_M33F_ENABLED=y
CONFIG_DT_HAS_ARM_CRYPTOCELL_312_ENABLED=y
CONFIG_DT_HAS_ARM_V8M_NVIC_ENABLED=y
CONFIG_DT_HAS_FIXED_PARTITIONS_ENABLED=y
CONFIG_DT_HAS_GPIO_KEYS_ENABLED=y
CONFIG_DT_HAS_GPIO_LEDS_ENABLED=y
CONFIG_DT_HAS_MMIO_SRAM_ENABLED=y
CONFIG_DT_HAS_NORDIC_MBOX_NRF_IPC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CLOCK_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CTRLAPPERI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_DCNF_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_DPPIC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_EGU_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_FICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIO_FORWARDER_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIOTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPREGRET_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_IEEE802154_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_IPC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_KMU_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_MUTEX_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_OSCILLATORS_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PINCTRL_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_POWER_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PWM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_QSPI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_REGULATORS_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RESET_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SAADC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SPIM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SPU_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TWIM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UARTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_USBD_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_USBREG_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_VMC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_WDT_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF53_FLASH_CONTROLLER_ENABLED=y
CONFIG_DT_HAS_NORDIC_QSPI_NOR_ENABLED=y
CONFIG_DT_HAS_PWM_LEDS_ENABLED=y
CONFIG_DT_HAS_SOC_NV_FLASH_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_BT_HCI_ENTROPY_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_IPC_OPENAMP_STATIC_VRINGS_ENABLED=y
# end of Devicetree Info

#
# Modules
#

#
# Available modules.
#

#
# nrf (C:/ncs/v2.7.0/nrf)
#
CONFIG_MBOX=y
CONFIG_NUM_METAIRQ_PRIORITIES=0
CONFIG_LOG_BUFFER_SIZE=1024
# CONFIG_INIT_STACKS is not set
CONFIG_MPSL_WORK_STACK_SIZE=1024
# CONFIG_SHURE_QSPI_DMA_ENCRYPTION is not set
# CONFIG_SHURE_QSPI_XIP_ENCRYPTION is not set

#
# Nordic nRF Connect
#
CONFIG_BOOT_BANNER_STRING="Booting nRF Connect SDK"
CONFIG_WARN_EXPERIMENTAL=y
CONFIG_BT_BUF_CMD_TX_COUNT=10
CONFIG_INIT_ARCH_HW_AT_BOOT=y
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096
# CONFIG_GETOPT is not set
# CONFIG_NCS_SAMPLES_DEFAULTS is not set
# CONFIG_NRF700X_RADIO_TEST_COMBO is not set
CONFIG_NCS_INCLUDE_RPMSG_CHILD_IMAGE=y
CONFIG_NCS_SAMPLE_HCI_IPC_CHILD_IMAGE=y

#
# Image build variants
#
# CONFIG_NCS_MCUBOOT_IN_BUILD is not set
# end of Image build variants

# CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU_SPEEDUP is not set
CONFIG_BT_L2CAP_TX_MTU=23
CONFIG_BT_BUF_ACL_TX_SIZE=27
CONFIG_BT_BUF_ACL_RX_SIZE=27

#
# Subsystems
#

#
# Bootloader
#
# CONFIG_BUILD_S1_VARIANT is not set
# CONFIG_SECURE_BOOT is not set
CONFIG_PM_PARTITION_SIZE_PROVISION=0x280
# CONFIG_B0_MIN_PARTITION_SIZE is not set
CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x8000
# CONFIG_IS_SECURE_BOOTLOADER is not set

#
# Secure Boot firmware validation
#
CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483
CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e
CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1
CONFIG_SB_VALIDATION_INFO_VERSION=2
CONFIG_SB_VALIDATION_METADATA_OFFSET=0
CONFIG_SB_VALIDATE_FW_SIGNATURE=y
# end of Secure Boot firmware validation

# CONFIG_SECURE_BOOT_STORAGE is not set
# end of Bootloader

#
# Bluetooth Low Energy
#
CONFIG_BT_COMPANY_ID_NORDIC=0x0059
CONFIG_BT_COMPANY_ID=0x0059
CONFIG_BT_MAX_CONN=1
CONFIG_BT_LL_SOFTDEVICE_HEADERS_INCLUDE=y
CONFIG_BT_HCI_TX_STACK_SIZE=1024
CONFIG_BT_RX_STACK_SIZE=1200

#
# BLE Libraries
#
# CONFIG_BT_GATT_POOL is not set
# CONFIG_BT_GATT_DM is not set
# CONFIG_BT_ADV_PROV is not set
# CONFIG_BT_CONN_CTX is not set

#
# Bluetooth Services
#
# CONFIG_BT_AMS_CLIENT is not set
# CONFIG_BT_ANCS_CLIENT is not set
# CONFIG_BT_BAS_CLIENT is not set
# CONFIG_BT_BMS is not set
# CONFIG_BT_CTS_CLIENT is not set
# CONFIG_BT_DFU_SMP is not set
# CONFIG_BT_GATTP is not set
# CONFIG_BT_HIDS is not set
# CONFIG_BT_HOGP is not set
# CONFIG_BT_LBS is not set
# CONFIG_BT_NSMS is not set
# CONFIG_BT_NUS is not set
# CONFIG_BT_NUS_CLIENT is not set
# CONFIG_BT_RSCS is not set
# CONFIG_BT_THROUGHPUT is not set
# CONFIG_BT_LATENCY is not set
# CONFIG_BT_LATENCY_CLIENT is not set
# CONFIG_BT_HRS_CLIENT is not set
# CONFIG_BT_DDFS is not set
# CONFIG_BT_MDS is not set
# CONFIG_BT_CGMS is not set
# CONFIG_BT_FAST_PAIR is not set
CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1
# CONFIG_BT_DIS is not set
# end of Bluetooth Services

#
# BLE over nRF RPC
#
# CONFIG_BT_RPC is not set
CONFIG_HEAP_MEM_POOL_SIZE=0
CONFIG_BT_DRIVERS=y
# CONFIG_BT_RPC_STACK is not set
# CONFIG_BT_CENTRAL is not set
CONFIG_BT_PERIPHERAL=y
# CONFIG_BT_OBSERVER is not set
CONFIG_BT_BROADCASTER=y
CONFIG_BT_CONN=y
# CONFIG_BT_REMOTE_VERSION is not set
CONFIG_BT_PHY_UPDATE=y
CONFIG_BT_DATA_LEN_UPDATE=y
# CONFIG_BT_EXT_ADV is not set
# CONFIG_BT_BAS is not set
CONFIG_BT_HRS=y
CONFIG_BT_HRS_DEFAULT_PERM_RW=y
# CONFIG_BT_HRS_DEFAULT_PERM_RW_ENCRYPT is not set
# CONFIG_BT_HRS_DEFAULT_PERM_RW_AUTHEN is not set
# CONFIG_BT_TPS is not set
# CONFIG_BT_ZEPHYR_NUS is not set
# CONFIG_BT_IAS is not set
# CONFIG_BT_IAS_CLIENT is not set
# CONFIG_BT_OTS is not set
# CONFIG_BT_OTS_CLIENT is not set
CONFIG_BT_BUF_ACL_TX_COUNT=3
CONFIG_BT_BUF_ACL_RX_COUNT=6
CONFIG_BT_BUF_EVT_RX_SIZE=68
CONFIG_BT_BUF_EVT_RX_COUNT=10
CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=43
CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT=3
CONFIG_BT_BUF_CMD_TX_SIZE=65
CONFIG_BT_HAS_HCI_VS=y
# CONFIG_BT_HCI_VS_FATAL_ERROR is not set
# CONFIG_BT_HCI_VS_EXT_DETECT is not set
# CONFIG_BT_WAIT_NOP is not set
CONFIG_BT_ASSERT=y
CONFIG_BT_ASSERT_VERBOSE=y
# CONFIG_BT_ASSERT_PANIC is not set
CONFIG_BT_DEBUG_NONE=y
# CONFIG_BT_DEBUG_LOG is not set
# CONFIG_BT_DEBUG_MONITOR_UART is not set
CONFIG_BT_LONG_WQ=y
CONFIG_BT_LONG_WQ_STACK_SIZE=1300
CONFIG_BT_LONG_WQ_PRIO=10
CONFIG_BT_LONG_WQ_INIT_PRIO=50
CONFIG_BT_HCI_HOST=y
# CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT is not set
CONFIG_BT_HCI_TX_PRIO=7
# CONFIG_BT_RECV_WORKQ_SYS is not set
CONFIG_BT_RECV_WORKQ_BT=y
CONFIG_BT_RX_PRIO=8
CONFIG_BT_DRIVER_RX_HIGH_PRIO=6
# CONFIG_BT_AUDIO is not set
CONFIG_BT_HOST_CRYPTO=y
CONFIG_BT_HOST_CRYPTO_PRNG=y
# CONFIG_BT_FILTER_ACCEPT_LIST is not set
CONFIG_BT_LIM_ADV_TIMEOUT=30
CONFIG_BT_CONN_TX_USER_DATA_SIZE=8
CONFIG_BT_CONN_TX_MAX=3
# CONFIG_BT_CONN_PARAM_ANY is not set
CONFIG_BT_AUTO_PHY_UPDATE=y
# CONFIG_BT_USER_DATA_LEN_UPDATE is not set
CONFIG_BT_AUTO_DATA_LEN_UPDATE=y
# CONFIG_BT_REMOTE_INFO is not set
# CONFIG_BT_SMP is not set
CONFIG_BT_L2CAP_TX_BUF_COUNT=3
CONFIG_BT_L2CAP_TX_FRAG_COUNT=2
CONFIG_BT_L2CAP_RESCHED_MS=1000
# CONFIG_BT_L2CAP_SEG_RECV is not set
CONFIG_BT_ATT_TX_COUNT=3
CONFIG_BT_ATT_PREPARE_COUNT=0
# CONFIG_BT_ATT_SENT_CB_AFTER_TX is not set
CONFIG_BT_GATT_SERVICE_CHANGED=y
# CONFIG_BT_GATT_DYNAMIC_DB is not set
CONFIG_BT_GATT_CACHING=y
# CONFIG_BT_GATT_NOTIFY_MULTIPLE is not set
# CONFIG_BT_GATT_ENFORCE_CHANGE_UNAWARE is not set
CONFIG_BT_GATT_ENFORCE_SUBSCRIPTION=y
# CONFIG_BT_GATT_CLIENT is not set
CONFIG_BT_GATT_READ_MULTIPLE=y
CONFIG_BT_GATT_READ_MULT_VAR_LEN=y
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS=y
CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS=y
CONFIG_BT_PERIPHERAL_PREF_MIN_INT=24
CONFIG_BT_PERIPHERAL_PREF_MAX_INT=40
CONFIG_BT_PERIPHERAL_PREF_LATENCY=0
CONFIG_BT_PERIPHERAL_PREF_TIMEOUT=42
# CONFIG_BT_GATT_AUTHORIZATION_CUSTOM is not set
CONFIG_BT_MAX_PAIRED=0
CONFIG_BT_CREATE_CONN_TIMEOUT=3
CONFIG_BT_CONN_PARAM_UPDATE_TIMEOUT=5000
CONFIG_BT_CONN_PARAM_RETRY_COUNT=3
CONFIG_BT_CONN_PARAM_RETRY_TIMEOUT=5000
# CONFIG_BT_DEVICE_NAME_DYNAMIC is not set
CONFIG_BT_DEVICE_NAME="Dynamic test beacon"
# CONFIG_BT_DEVICE_APPEARANCE_DYNAMIC is not set
CONFIG_BT_DEVICE_APPEARANCE=833
CONFIG_BT_ID_MAX=1
# CONFIG_BT_DF is not set
# CONFIG_BT_ECC is not set
# CONFIG_BT_HOST_CCM is not set
# CONFIG_BT_LOG_SNIFFER_INFO is not set
# CONFIG_BT_TESTING is not set
# CONFIG_BT_CLASSIC is not set
# CONFIG_BT_HCI_VS_EVT_USER is not set
# end of BLE over nRF RPC
# end of Bluetooth Low Energy

#
# DFU
#
# CONFIG_DFU_MULTI_IMAGE is not set
# CONFIG_DFU_TARGET is not set
# end of DFU

# CONFIG_ESB is not set

#
# Peripheral CPU DFU (PCD)
#
# CONFIG_PCD is not set
# CONFIG_PCD_APP is not set
CONFIG_PCD_VERSION_PAGE_BUF_SIZE=2046
# CONFIG_PCD_NET is not set
# end of Peripheral CPU DFU (PCD)

#
# Networking
#

#
# Application protocols
#

#
# nRF Cloud
#

#
# Client ID (nRF Cloud Device ID)
#
CONFIG_NRF_CLOUD_CLIENT_ID_SRC_COMPILE_TIME=y
CONFIG_NRF_CLOUD_CLIENT_ID="my-client-id"
# end of Client ID (nRF Cloud Device ID)

# CONFIG_NRF_CLOUD_MQTT is not set
# CONFIG_NRF_CLOUD_FOTA is not set
CONFIG_FOTA_USE_NRF_CLOUD_SETTINGS_AREA=y
CONFIG_FOTA_DL_TIMEOUT_MIN=15
# CONFIG_NRF_CLOUD_FOTA_FULL_MODEM_UPDATE is not set
# CONFIG_NRF_CLOUD_REST is not set
# CONFIG_NRF_CLOUD_LOCATION_PARSE_ANCHORS is not set
# CONFIG_NRF_CLOUD_ALERT is not set
# CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL_OFF is not set
# CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL_ERR is not set
# CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL_WRN is not set
# CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL_INF is not set
# CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL_DBG is not set
CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL_DEFAULT=y
CONFIG_NRF_CLOUD_ALERT_LOG_LEVEL=3
CONFIG_NRF_CLOUD_LOG_OUTPUT_LEVEL=1
# CONFIG_NRF_CLOUD_LOG_INCLUDE_LEVEL_0 is not set
CONFIG_NRF_CLOUD_LOG_BUF_SIZE=256
# CONFIG_NRF_CLOUD_LOG_LOG_LEVEL_OFF is not set
# CONFIG_NRF_CLOUD_LOG_LOG_LEVEL_ERR is not set
# CONFIG_NRF_CLOUD_LOG_LOG_LEVEL_WRN is not set
# CONFIG_NRF_CLOUD_LOG_LOG_LEVEL_INF is not set
# CONFIG_NRF_CLOUD_LOG_LOG_LEVEL_DBG is not set
CONFIG_NRF_CLOUD_LOG_LOG_LEVEL_DEFAULT=y
CONFIG_NRF_CLOUD_LOG_LOG_LEVEL=3
# CONFIG_NRF_CLOUD_COAP is not set

#
# Send shadow info sections on initial connect (MQTT/CoAP)
#
# end of Send shadow info sections on initial connect (MQTT/CoAP)

# CONFIG_NRF_CLOUD_GATEWAY is not set
# CONFIG_NRF_CLOUD_LOG_LEVEL_OFF is not set
# CONFIG_NRF_CLOUD_LOG_LEVEL_ERR is not set
# CONFIG_NRF_CLOUD_LOG_LEVEL_WRN is not set
# CONFIG_NRF_CLOUD_LOG_LEVEL_INF is not set
# CONFIG_NRF_CLOUD_LOG_LEVEL_DBG is not set
CONFIG_NRF_CLOUD_LOG_LEVEL_DEFAULT=y
CONFIG_NRF_CLOUD_LOG_LEVEL=3
# end of nRF Cloud

# CONFIG_REST_CLIENT is not set
# CONFIG_DOWNLOAD_CLIENT is not set
# CONFIG_AWS_IOT is not set
# CONFIG_AWS_JOBS is not set
# CONFIG_AZURE_IOT_HUB is not set

#
# Self-Registration (Zi ZHu Ce)
#
# end of Self-Registration (Zi ZHu Ce)

# CONFIG_ICAL_PARSER is not set
# CONFIG_FTP_CLIENT is not set
# CONFIG_LWM2M_CLIENT_UTILS is not set
# CONFIG_WIFI_CREDENTIALS is not set
# CONFIG_WIFI_CREDENTIALS_STATIC is not set
# CONFIG_MQTT_HELPER is not set
# CONFIG_NRF_MCUMGR_SMP_CLIENT is not set
# end of Application protocols
# end of Networking

#
# NFC
#
# CONFIG_NFC_NDEF is not set
# CONFIG_NFC_NDEF_PARSER is not set
# CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set
# CONFIG_NFC_T2T_PARSER is not set
# CONFIG_NFC_T4T_NDEF_FILE is not set
# CONFIG_NFC_T4T_ISODEP is not set
# CONFIG_NFC_T4T_APDU is not set
# CONFIG_NFC_T4T_CC_FILE is not set
# CONFIG_NFC_T4T_HL_PROCEDURE is not set
# CONFIG_NFC_PLATFORM is not set
# CONFIG_NFC_TNEP_TAG is not set
# CONFIG_NFC_TNEP_POLLER is not set
# CONFIG_NFC_TNEP_CH is not set
# end of NFC

# CONFIG_APP_EVENT_MANAGER is not set
# CONFIG_NRF_PROFILER is not set
# CONFIG_FW_INFO is not set

#
# Debug
#
# CONFIG_CPU_LOAD is not set
# CONFIG_PPI_TRACE is not set
# end of Debug

# CONFIG_SHELL_BT_NUS is not set
# CONFIG_SHELL_IPC is not set

#
# Multiprotocol service layer (MPSL)
#
# CONFIG_MPSL_FEM_ONLY is not set
# CONFIG_MPSL_FEM_DEVICE_CONFIG_254 is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_OFF is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_ERR is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_WRN is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_INF is not set
# CONFIG_MPSL_FEM_LOG_LEVEL_DBG is not set
CONFIG_MPSL_FEM_LOG_LEVEL_DEFAULT=y
CONFIG_MPSL_FEM_LOG_LEVEL=3
CONFIG_MPSL_THREAD_COOP_PRIO=8
CONFIG_MPSL_TIMESLOT_SESSION_COUNT=0
# CONFIG_MPSL_ASSERT_HANDLER is not set
CONFIG_MPSL_LOW_PRIO_IRQN=26
# CONFIG_MPSL_LOG_LEVEL_OFF is not set
# CONFIG_MPSL_LOG_LEVEL_ERR is not set
# CONFIG_MPSL_LOG_LEVEL_WRN is not set
# CONFIG_MPSL_LOG_LEVEL_INF is not set
# CONFIG_MPSL_LOG_LEVEL_DBG is not set
CONFIG_MPSL_LOG_LEVEL_DEFAULT=y
CONFIG_MPSL_LOG_LEVEL=3
# CONFIG_MPSL_PIN_DEBUG is not set
# end of Multiprotocol service layer (MPSL)

#
# Partition Manager
#
CONFIG_PARTITION_MANAGER_ENABLED=y
CONFIG_FLASH_MAP_CUSTOM=y
CONFIG_SRAM_BASE_ADDRESS=0x20000000

#
# Zephyr subsystem configurations
#
CONFIG_RPMSG_NRF53_SRAM_SIZE=0x10000
# end of Zephyr subsystem configurations

#
# NCS subsystem configurations
#
# CONFIG_PM_SINGLE_IMAGE is not set
CONFIG_PM_EXTERNAL_FLASH_BASE=0
CONFIG_PM_EXTERNAL_FLASH_PATH=""
CONFIG_PM_EXTERNAL_FLASH_SIZE_BITS=0
# CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK is not set
CONFIG_PM_SRAM_BASE=0x20000000
CONFIG_PM_SRAM_SIZE=0x80000
# end of Partition Manager

#
# nRF RPC (Remote Procedure Call) library
#
# end of nRF RPC (Remote Procedure Call) library

# CONFIG_ZIGBEE is not set

#
# Full Modem Firmware Update Management(FMFU)
#
# CONFIG_MGMT_FMFU_LOG_LEVEL_OFF is not set
# CONFIG_MGMT_FMFU_LOG_LEVEL_ERR is not set
# CONFIG_MGMT_FMFU_LOG_LEVEL_WRN is not set
# CONFIG_MGMT_FMFU_LOG_LEVEL_INF is not set
# CONFIG_MGMT_FMFU_LOG_LEVEL_DBG is not set
CONFIG_MGMT_FMFU_LOG_LEVEL_DEFAULT=y
CONFIG_MGMT_FMFU_LOG_LEVEL=3
# end of Full Modem Firmware Update Management(FMFU)

#
# SUIT-based Firmware Update Management
#
CONFIG_MGMT_SUITFU_TRIGGER_UPDATE_RESET_DELAY_MS=100
CONFIG_MGMT_SUITFU_AUTO_REGISTER_HANDLERS=y
CONFIG_MGMT_SUITFU_GRP_IMG=y
CONFIG_MGMT_SUITFU_IMAGE_NUMBER=0
# CONFIG_MGMT_SUITFU_GRP_SUIT is not set
# CONFIG_MGMT_SUITFU_LOG_LEVEL_OFF is not set
# CONFIG_MGMT_SUITFU_LOG_LEVEL_ERR is not set
# CONFIG_MGMT_SUITFU_LOG_LEVEL_WRN is not set
# CONFIG_MGMT_SUITFU_LOG_LEVEL_INF is not set
# CONFIG_MGMT_SUITFU_LOG_LEVEL_DBG is not set
CONFIG_MGMT_SUITFU_LOG_LEVEL_DEFAULT=y
CONFIG_MGMT_SUITFU_LOG_LEVEL=3
# end of SUIT-based Firmware Update Management

# CONFIG_CAF is not set

#
# Nordic IEEE 802.15.4
#
# end of Nordic IEEE 802.15.4

# CONFIG_DM_MODULE is not set

#
# nRF Security
#
# CONFIG_NORDIC_SECURITY_BACKEND is not set
# CONFIG_NRF_SECURITY is not set
# CONFIG_PSA_WANT_GENERATE_RANDOM is not set
# CONFIG_PSA_WANT_ALG_CTR_DRBG is not set
# CONFIG_PSA_WANT_ALG_HMAC_DRBG is not set
# CONFIG_PSA_WANT_KEY_TYPE_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_RAW_DATA is not set
# CONFIG_PSA_WANT_KEY_TYPE_HMAC is not set
# CONFIG_PSA_WANT_KEY_TYPE_PASSWORD is not set
# CONFIG_PSA_WANT_KEY_TYPE_PASSWORD_HASH is not set
# CONFIG_PSA_WANT_KEY_TYPE_PEPPER is not set
# CONFIG_PSA_WANT_KEY_TYPE_AES is not set
# CONFIG_PSA_WANT_KEY_TYPE_ARIA is not set
# CONFIG_PSA_WANT_KEY_TYPE_DES is not set
# CONFIG_PSA_WANT_KEY_TYPE_CAMELLIA is not set
# CONFIG_PSA_WANT_KEY_TYPE_SM4 is not set
# CONFIG_PSA_WANT_KEY_TYPE_ARC4 is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE is not set
# CONFIG_PSA_WANT_KEY_TYPE_DH_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_DH_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR is not set
# CONFIG_PSA_WANT_ALG_CCM is not set
# CONFIG_PSA_WANT_ALG_GCM is not set
# CONFIG_PSA_WANT_ALG_CHACHA20_POLY1305 is not set
# CONFIG_PSA_WANT_ALG_CBC_MAC is not set
# CONFIG_PSA_WANT_ALG_CMAC is not set
# CONFIG_PSA_WANT_ALG_HMAC is not set
# CONFIG_PSA_WANT_ALG_SHA_1 is not set
# CONFIG_PSA_WANT_ALG_SHA_224 is not set
# CONFIG_PSA_WANT_ALG_SHA_384 is not set
# CONFIG_PSA_WANT_ALG_SHA_512 is not set
# CONFIG_PSA_WANT_ALG_SHA_512_224 is not set
# CONFIG_PSA_WANT_ALG_SHA_512_256 is not set
# CONFIG_PSA_WANT_ALG_SHA3_224 is not set
# CONFIG_PSA_WANT_ALG_SHA3_256 is not set
# CONFIG_PSA_WANT_ALG_SHA3_384 is not set
# CONFIG_PSA_WANT_ALG_SHA3_512 is not set
# CONFIG_PSA_WANT_ALG_SM3 is not set
# CONFIG_PSA_WANT_ALG_SHAKE256_512 is not set
# CONFIG_PSA_WANT_ALG_RIPEMD160 is not set
# CONFIG_PSA_WANT_ALG_MD2 is not set
# CONFIG_PSA_WANT_ALG_MD4 is not set
# CONFIG_PSA_WANT_ALG_MD5 is not set
# CONFIG_PSA_WANT_ALG_ECB_NO_PADDING is not set
# CONFIG_PSA_WANT_ALG_CBC_NO_PADDING is not set
# CONFIG_PSA_WANT_ALG_CBC_PKCS7 is not set
# CONFIG_PSA_WANT_ALG_CFB is not set
# CONFIG_PSA_WANT_ALG_CTR is not set
# CONFIG_PSA_WANT_ALG_OFB is not set
# CONFIG_PSA_WANT_ALG_XTS is not set
# CONFIG_PSA_WANT_ALG_CCM_STAR_NO_TAG is not set
# CONFIG_PSA_WANT_ALG_STREAM_CIPHER is not set
# CONFIG_PSA_WANT_ALG_ECDH is not set
# CONFIG_PSA_WANT_ALG_FFDH is not set
# CONFIG_PSA_WANT_ALG_HKDF_EXTRACT is not set
# CONFIG_PSA_WANT_ALG_HKDF_EXPAND is not set
# CONFIG_PSA_WANT_ALG_ECDSA is not set
# CONFIG_PSA_WANT_ALG_ECDSA_ANY is not set
# CONFIG_PSA_WANT_ALG_DETERMINISTIC_ECDSA is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_160 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_192 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_224 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_256 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_320 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_384 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_512 is not set
# CONFIG_PSA_WANT_ECC_MONTGOMERY_255 is not set
# CONFIG_PSA_WANT_ECC_MONTGOMERY_448 is not set
# CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_255 is not set
# CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_448 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_192 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_224 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_256 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_192 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_224 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_256 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_384 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_521 is not set
# CONFIG_PSA_WANT_ECC_SECP_R2_160 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_163 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_233 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_239 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_283 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_409 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_571 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_163 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_233 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_283 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_409 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_571 is not set
# CONFIG_PSA_WANT_ECC_SECT_R2_163 is not set
# CONFIG_PSA_WANT_ECC_FRP_V1_256 is not set
# CONFIG_PSA_WANT_ALG_RSA_OAEP is not set
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_CRYPT is not set
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN is not set
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW is not set
# CONFIG_PSA_WANT_ALG_RSA_PSS is not set
# CONFIG_PSA_WANT_ALG_RSA_PSS_ANY_SALT is not set
# CONFIG_PSA_WANT_ALG_JPAKE is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_HMAC is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_CMAC is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_MATTER is not set
# CONFIG_PSA_WANT_ALG_SRP_6 is not set
# CONFIG_PSA_WANT_ALG_SRP_PASSWORD_HASH is not set
# CONFIG_PSA_WANT_ALG_PURE_EDDSA is not set
# CONFIG_PSA_WANT_ALG_ED25519PH is not set
# CONFIG_PSA_WANT_ALG_ED448PH is not set
# end of nRF Security

# CONFIG_NET_CORE_MONITOR is not set

#
# Audio Module
#
# CONFIG_AUDIO_MODULE_TEST is not set
CONFIG_AUDIO_MODULE_NAME_SIZE=20
# CONFIG_AUDIO_MODULE_LOG_LEVEL_OFF is not set
# CONFIG_AUDIO_MODULE_LOG_LEVEL_ERR is not set
# CONFIG_AUDIO_MODULE_LOG_LEVEL_WRN is not set
# CONFIG_AUDIO_MODULE_LOG_LEVEL_INF is not set
# CONFIG_AUDIO_MODULE_LOG_LEVEL_DBG is not set
CONFIG_AUDIO_MODULE_LOG_LEVEL_DEFAULT=y
CONFIG_AUDIO_MODULE_LOG_LEVEL=3
# end of Audio Module

# CONFIG_UART_ASYNC_ADAPTER is not set
# CONFIG_TRUSTED_STORAGE is not set

#
# SUIT provisioning
#
# CONFIG_SUIT_MPI_GENERATE is not set
# end of SUIT provisioning

# CONFIG_SUIT is not set
# CONFIG_DULT is not set
# end of Subsystems

# CONFIG_WPA_SUPP is not set
CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=-1
CONFIG_POSIX_MAX_FDS=4
# CONFIG_WFA_QT_LOG_LEVEL_OFF is not set
# CONFIG_WFA_QT_LOG_LEVEL_ERR is not set
# CONFIG_WFA_QT_LOG_LEVEL_WRN is not set
# CONFIG_WFA_QT_LOG_LEVEL_INF is not set
# CONFIG_WFA_QT_LOG_LEVEL_DBG is not set
CONFIG_WFA_QT_LOG_LEVEL_DEFAULT=y
CONFIG_WFA_QT_LOG_LEVEL=3
# CONFIG_WFA_QT_CONTROL_APP is not set
CONFIG_WFA_QT_THREAD_STACK_SIZE=4096
CONFIG_WFA_QT_REBOOT_TIMEOUT_MS=1000
CONFIG_WFA_QT_DEFAULT_INTERFACE="nordic_wlan0"
CONFIG_WPAS_READY_TIMEOUT_MS=10000

#
# Libraries
#

#
# Binary libraries
#
# end of Binary libraries

# CONFIG_AT_MONITOR is not set
# CONFIG_LTE_LINK_CONTROL is not set
CONFIG_NRF_SPU_FLASH_REGION_SIZE=0x4000
CONFIG_FPROTECT_BLOCK_SIZE=0x4000
# CONFIG_FPROTECT is not set
# CONFIG_AT_CMD_CUSTOM is not set
# CONFIG_DK_LIBRARY is not set
# CONFIG_AT_CMD_PARSER is not set
# CONFIG_MODEM_INFO is not set
# CONFIG_RESET_ON_FATAL_ERROR is not set
# CONFIG_SMS is not set
# CONFIG_DATE_TIME is not set
# CONFIG_HW_ID_LIBRARY is not set
# CONFIG_RAM_POWER_DOWN_LIBRARY is not set
# CONFIG_WAVE_GEN_LIB is not set
CONFIG_HW_UNIQUE_KEY_SUPPORTED=y
CONFIG_HW_UNIQUE_KEY_PARTITION_SIZE=0
# CONFIG_MODEM_JWT is not set
# CONFIG_LOCATION is not set
# CONFIG_QOS is not set
# CONFIG_SFLOAT is not set
# CONFIG_CONTIN_ARRAY is not set
# CONFIG_PCM_MIX is not set
# CONFIG_TONE is not set
# CONFIG_PSCM is not set
# CONFIG_DATA_FIFO is not set
# CONFIG_FEM_AL_LIB is not set
# CONFIG_SAMPLE_RATE_CONVERTER is not set
CONFIG_NCS_BOOT_BANNER=y
CONFIG_NCS_NCS_BOOT_BANNER_STRING="nRF Connect SDK"
CONFIG_NCS_ZEPHYR_BOOT_BANNER_STRING="Zephyr OS"
# end of Libraries

#
# Device Drivers
#
# CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE is not set
CONFIG_HW_CC3XX=y
# CONFIG_ETH_RTT is not set
# CONFIG_SENSOR is not set
# CONFIG_NRF_SW_LPUART is not set
CONFIG_NRFX_GPIOTE_NUM_OF_EVT_HANDLERS=1
# CONFIG_IPC_UART is not set
# CONFIG_FLASH_RPC is not set
# end of Device Drivers

#
# External libraries
#
# end of External libraries

#
# Test
#
CONFIG_ZTEST_MULTICORE_DEFAULT_SETTINGS=y
# CONFIG_UNITY is not set

#
# Mocks
#
# CONFIG_MOCK_NRF_MODEM_AT is not set
# end of Mocks
# end of Test
# end of Nordic nRF Connect

CONFIG_ZEPHYR_NRF_MODULE=y
# end of nrf (C:/ncs/v2.7.0/nrf)

#
# mbedtls (C:/ncs/v2.7.0/modules/crypto/mbedtls)
#
CONFIG_ZEPHYR_MBEDTLS_MODULE=y

#
# PSA RNG support
#
# end of PSA RNG support

#
# PSA key type support
#
# end of PSA key type support

#
# PSA AEAD support
#
# end of PSA AEAD support

#
# PSA MAC support
#
# end of PSA MAC support

#
# PSA Hash support
#
# end of PSA Hash support

#
# PSA Cipher support
#
# end of PSA Cipher support

#
# PSA Key agreement support
#
# end of PSA Key agreement support

#
# PSA Key derivation support
#
# end of PSA Key derivation support

#
# PSA Asymmetric support
#

#
# Elliptic Curve type support
#
# end of Elliptic Curve type support
# end of PSA Asymmetric support
# end of mbedtls (C:/ncs/v2.7.0/modules/crypto/mbedtls)

#
# oberon-psa-crypto (C:/ncs/v2.7.0/modules/crypto/oberon-psa-crypto)
#
CONFIG_ZEPHYR_OBERON_PSA_CRYPTO_MODULE=y
# end of oberon-psa-crypto (C:/ncs/v2.7.0/modules/crypto/oberon-psa-crypto)

#
# trusted-firmware-m (C:/ncs/v2.7.0/modules/tee/tf-m/trusted-firmware-m)
#
CONFIG_TFM_BOARD="C:/ncs/v2.7.0/zephyr/modules/trusted-firmware-m/nordic/nrf5340_cpuapp"
# CONFIG_BOOTLOADER_MCUBOOT is not set
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
# end of trusted-firmware-m (C:/ncs/v2.7.0/modules/tee/tf-m/trusted-firmware-m)

CONFIG_ZEPHYR_PSA_ARCH_TESTS_MODULE=y
CONFIG_ZEPHYR_SOC_HWMV1_MODULE=y

#
# cjson (C:/ncs/v2.7.0/modules/lib/cjson)
#
# CONFIG_CJSON_LIB is not set
CONFIG_ZEPHYR_CJSON_MODULE=y
# end of cjson (C:/ncs/v2.7.0/modules/lib/cjson)

#
# azure-sdk-for-c (C:/ncs/v2.7.0/modules/lib/azure-sdk-for-c)
#
# CONFIG_AZURE_SDK is not set
CONFIG_ZEPHYR_AZURE_SDK_FOR_C_MODULE=y
# end of azure-sdk-for-c (C:/ncs/v2.7.0/modules/lib/azure-sdk-for-c)

#
# cirrus-logic (C:/ncs/v2.7.0/modules/hal/cirrus-logic)
#
# CONFIG_HW_CODEC_CIRRUS_LOGIC is not set
CONFIG_ZEPHYR_CIRRUS_LOGIC_MODULE=y
# end of cirrus-logic (C:/ncs/v2.7.0/modules/hal/cirrus-logic)

#
# openthread (C:/ncs/v2.7.0/modules/lib/openthread)
#
# CONFIG_OPENTHREAD is not set
CONFIG_ZEPHYR_OPENTHREAD_MODULE=y
# end of openthread (C:/ncs/v2.7.0/modules/lib/openthread)

#
# suit-generator (C:/ncs/v2.7.0/modules/lib/suit-generator)
#
CONFIG_SUIT_ENVELOPE_TEMPLATE=""
CONFIG_SUIT_ENVELOPE_TARGET=""
CONFIG_SUIT_ENVELOPE_OUTPUT_ARTIFACT="merged.hex"
CONFIG_SUIT_ENVELOPE_OUTPUT_MPI_MERGE=y
# CONFIG_SUIT_LOCAL_ENVELOPE_GENERATE is not set
CONFIG_ZEPHYR_SUIT_GENERATOR_MODULE=y
# end of suit-generator (C:/ncs/v2.7.0/modules/lib/suit-generator)

#
# suit-processor (C:/ncs/v2.7.0/modules/lib/suit-processor)
#
# CONFIG_SUIT_PROCESSOR is not set
CONFIG_SUIT_PLATFORM_DRY_RUN_SUPPORT=y
CONFIG_ZEPHYR_SUIT_PROCESSOR_MODULE=y
# end of suit-processor (C:/ncs/v2.7.0/modules/lib/suit-processor)

#
# memfault-firmware-sdk (C:/ncs/v2.7.0/modules/lib/memfault-firmware-sdk)
#
# CONFIG_MEMFAULT is not set
CONFIG_ZEPHYR_MEMFAULT_FIRMWARE_SDK_MODULE=y
# end of memfault-firmware-sdk (C:/ncs/v2.7.0/modules/lib/memfault-firmware-sdk)

#
# coremark (C:/ncs/v2.7.0/modules/benchmark/coremark)
#
# CONFIG_COREMARK is not set
CONFIG_ZEPHYR_COREMARK_MODULE=y
# end of coremark (C:/ncs/v2.7.0/modules/benchmark/coremark)

#
# canopennode (C:/ncs/v2.7.0/modules/lib/canopennode)
#
CONFIG_ZEPHYR_CANOPENNODE_MODULE=y
# end of canopennode (C:/ncs/v2.7.0/modules/lib/canopennode)

#
# chre (C:/ncs/v2.7.0/modules/lib/chre)
#
CONFIG_ZEPHYR_CHRE_MODULE=y
# CONFIG_CHRE is not set
# end of chre (C:/ncs/v2.7.0/modules/lib/chre)

#
# lz4 (C:/ncs/v2.7.0/modules/lib/lz4)
#
CONFIG_ZEPHYR_LZ4_MODULE=y
# CONFIG_LZ4 is not set
# end of lz4 (C:/ncs/v2.7.0/modules/lib/lz4)

#
# nanopb (C:/ncs/v2.7.0/modules/lib/nanopb)
#
CONFIG_ZEPHYR_NANOPB_MODULE=y
# CONFIG_NANOPB is not set
# end of nanopb (C:/ncs/v2.7.0/modules/lib/nanopb)

CONFIG_ZEPHYR_TF_M_TESTS_MODULE=y

#
# zscilib (C:/ncs/v2.7.0/modules/lib/zscilib)
#
# CONFIG_ZSL is not set
CONFIG_ZEPHYR_ZSCILIB_MODULE=y
# end of zscilib (C:/ncs/v2.7.0/modules/lib/zscilib)

#
# cmsis (C:/ncs/v2.7.0/modules/hal/cmsis)
#
CONFIG_ZEPHYR_CMSIS_MODULE=y
CONFIG_HAS_CMSIS_CORE=y
CONFIG_HAS_CMSIS_CORE_M=y
# CONFIG_CMSIS_M_CHECK_DEVICE_DEFINES is not set
# end of cmsis (C:/ncs/v2.7.0/modules/hal/cmsis)

#
# cmsis-dsp (C:/ncs/v2.7.0/modules/lib/cmsis-dsp)
#
CONFIG_ZEPHYR_CMSIS_DSP_MODULE=y
# CONFIG_CMSIS_DSP is not set
# end of cmsis-dsp (C:/ncs/v2.7.0/modules/lib/cmsis-dsp)

#
# cmsis-nn (C:/ncs/v2.7.0/modules/lib/cmsis-nn)
#
CONFIG_ZEPHYR_CMSIS_NN_MODULE=y
# CONFIG_CMSIS_NN is not set
# end of cmsis-nn (C:/ncs/v2.7.0/modules/lib/cmsis-nn)

#
# fatfs (C:/ncs/v2.7.0/modules/fs/fatfs)
#
CONFIG_ZEPHYR_FATFS_MODULE=y
# end of fatfs (C:/ncs/v2.7.0/modules/fs/fatfs)

#
# hal_nordic (C:/ncs/v2.7.0/modules/hal/nordic)
#
CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
CONFIG_HAS_NORDIC_DRIVERS=y

#
# Nordic drivers
#
# CONFIG_NRF_802154_SOURCE_HAL_NORDIC is not set
# CONFIG_NRF_802154_SER_HOST is not set
# end of Nordic drivers

CONFIG_HAS_NRFX=y

#
# nrfx drivers
#

#
# nrfx drivers logging
#
# CONFIG_NRFX_CLOCK_LOG is not set
# CONFIG_NRFX_DPPI_LOG is not set
# CONFIG_NRFX_GPIOTE_LOG is not set
# CONFIG_NRFX_IPC_LOG is not set
# end of nrfx drivers logging

CONFIG_NRFX_CLOCK=y
CONFIG_NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED=y
# CONFIG_NRFX_COMP is not set
CONFIG_NRFX_DPPI=y
# CONFIG_NRFX_EGU0 is not set
# CONFIG_NRFX_EGU1 is not set
# CONFIG_NRFX_EGU2 is not set
# CONFIG_NRFX_EGU3 is not set
# CONFIG_NRFX_EGU4 is not set
# CONFIG_NRFX_EGU5 is not set
CONFIG_NRFX_GPIOTE=y
CONFIG_NRFX_GPIOTE0=y
# CONFIG_NRFX_GPIOTE1 is not set
# CONFIG_NRFX_I2S0 is not set
CONFIG_NRFX_IPC=y
# CONFIG_NRFX_NFCT is not set
# CONFIG_NRFX_NVMC is not set
# CONFIG_NRFX_PDM is not set
# CONFIG_NRFX_POWER is not set
# CONFIG_NRFX_PWM0 is not set
# CONFIG_NRFX_PWM1 is not set
# CONFIG_NRFX_PWM2 is not set
# CONFIG_NRFX_PWM3 is not set
# CONFIG_NRFX_QDEC0 is not set
# CONFIG_NRFX_QDEC1 is not set
# CONFIG_NRFX_QSPI is not set
# CONFIG_NRFX_RTC0 is not set
# CONFIG_NRFX_RTC1 is not set
# CONFIG_NRFX_SAADC is not set
# CONFIG_NRFX_SPIM0 is not set
# CONFIG_NRFX_SPIM1 is not set
# CONFIG_NRFX_SPIM2 is not set
# CONFIG_NRFX_SPIM3 is not set
# CONFIG_NRFX_SPIM4 is not set
# CONFIG_NRFX_SYSTICK is not set
# CONFIG_NRFX_TIMER0 is not set
# CONFIG_NRFX_TIMER1 is not set
# CONFIG_NRFX_TIMER2 is not set
# CONFIG_NRFX_TWIM0 is not set
# CONFIG_NRFX_TWIM1 is not set
# CONFIG_NRFX_TWIM2 is not set
# CONFIG_NRFX_TWIM3 is not set
# CONFIG_NRFX_UARTE0 is not set
# CONFIG_NRFX_UARTE1 is not set
# CONFIG_NRFX_UARTE2 is not set
# CONFIG_NRFX_UARTE3 is not set
# CONFIG_NRFX_USBREG is not set
# CONFIG_NRFX_WDT0 is not set
# CONFIG_NRFX_WDT1 is not set

#
# Peripheral Resource Sharing module
#
# CONFIG_NRFX_PRS_BOX_0 is not set
# CONFIG_NRFX_PRS_BOX_1 is not set
# CONFIG_NRFX_PRS_BOX_2 is not set
# CONFIG_NRFX_PRS_BOX_3 is not set
# CONFIG_NRFX_PRS_BOX_4 is not set
# end of Peripheral Resource Sharing module
# end of nrfx drivers
# end of hal_nordic (C:/ncs/v2.7.0/modules/hal/nordic)

#
# hal_st (C:/ncs/v2.7.0/modules/hal/st)
#
CONFIG_ZEPHYR_HAL_ST_MODULE=y
# end of hal_st (C:/ncs/v2.7.0/modules/hal/st)

CONFIG_ZEPHYR_HAL_WURTHELEKTRONIK_MODULE=y
CONFIG_ZEPHYR_LIBMETAL_MODULE=y

#
# liblc3 (C:/ncs/v2.7.0/modules/lib/liblc3)
#
CONFIG_ZEPHYR_LIBLC3_MODULE=y
# end of liblc3 (C:/ncs/v2.7.0/modules/lib/liblc3)

#
# littlefs (C:/ncs/v2.7.0/modules/fs/littlefs)
#
CONFIG_ZEPHYR_LITTLEFS_MODULE=y
# end of littlefs (C:/ncs/v2.7.0/modules/fs/littlefs)

#
# loramac-node (C:/ncs/v2.7.0/modules/lib/loramac-node)
#
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
# CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set
# end of loramac-node (C:/ncs/v2.7.0/modules/lib/loramac-node)

#
# lvgl (C:/ncs/v2.7.0/modules/lib/gui/lvgl)
#
CONFIG_ZEPHYR_LVGL_MODULE=y
# end of lvgl (C:/ncs/v2.7.0/modules/lib/gui/lvgl)

CONFIG_ZEPHYR_MIPI_SYS_T_MODULE=y
CONFIG_ZEPHYR_NRF_HW_MODELS_MODULE=y
CONFIG_ZEPHYR_OPEN_AMP_MODULE=y

#
# picolibc (C:/ncs/v2.7.0/modules/lib/picolibc)
#
# CONFIG_PICOLIBC_MODULE is not set
CONFIG_ZEPHYR_PICOLIBC_MODULE=y
# end of picolibc (C:/ncs/v2.7.0/modules/lib/picolibc)

#
# segger (C:/ncs/v2.7.0/modules/debug/segger)
#
CONFIG_ZEPHYR_SEGGER_MODULE=y
CONFIG_HAS_SEGGER_RTT=y
# CONFIG_USE_SEGGER_RTT is not set
# end of segger (C:/ncs/v2.7.0/modules/debug/segger)

CONFIG_ZEPHYR_TINYCRYPT_MODULE=y

#
# uoscore-uedhoc (C:/ncs/v2.7.0/modules/lib/uoscore-uedhoc)
#
CONFIG_ZEPHYR_UOSCORE_UEDHOC_MODULE=y
# end of uoscore-uedhoc (C:/ncs/v2.7.0/modules/lib/uoscore-uedhoc)

#
# zcbor (C:/ncs/v2.7.0/modules/lib/zcbor)
#
CONFIG_ZEPHYR_ZCBOR_MODULE=y
# CONFIG_ZCBOR is not set
# end of zcbor (C:/ncs/v2.7.0/modules/lib/zcbor)

#
# mcuboot (C:/ncs/v2.7.0/bootloader/mcuboot)
#

#
# MCUboot
#
CONFIG_BOOT_SIGNATURE_KEY_FILE=""
CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=4
CONFIG_MCUBOOT_USB_SUPPORT=y
# CONFIG_MCUBOOT_USE_ALL_AVAILABLE_RAM is not set
# end of MCUboot

# CONFIG_XIP_SPLIT_IMAGE is not set
CONFIG_ZEPHYR_MCUBOOT_MODULE=y
# end of mcuboot (C:/ncs/v2.7.0/bootloader/mcuboot)

#
# nrfxlib (C:/ncs/v2.7.0/nrfxlib)
#

#
# Nordic nrfxlib
#

#
# nrf_modem (Modem library)
#
# end of nrf_modem (Modem library)

CONFIG_NRF_MODEM_SHMEM_CTRL_SIZE=0x4e8
# CONFIG_NFC_T2T_NRFXLIB is not set
# CONFIG_NFC_T4T_NRFXLIB is not set

#
# Crypto libraries for nRF5x SOCs.
#
CONFIG_NRFXLIB_CRYPTO=y
CONFIG_HAS_HW_NRF_CC3XX=y
# CONFIG_NRF_OBERON is not set
# CONFIG_NRF_CC310_BL is not set
CONFIG_NRF_CC3XX_PLATFORM=y
CONFIG_CC3XX_MUTEX_LOCK=y
# CONFIG_CC3XX_ATOMIC_LOCK is not set
# CONFIG_CC3XX_HW_MUTEX_LOCK is not set
# end of Crypto libraries for nRF5x SOCs.

# CONFIG_NRF_RPC is not set
CONFIG_NRF_802154_SOURCE_NRFXLIB=y
# CONFIG_GZLL is not set
# CONFIG_NRF_DM is not set
# CONFIG_NRF_FUEL_GAUGE is not set
# end of Nordic nrfxlib

CONFIG_ZEPHYR_NRFXLIB_MODULE=y
# end of nrfxlib (C:/ncs/v2.7.0/nrfxlib)

#
# connectedhomeip (C:/ncs/v2.7.0/modules/lib/matter)
#
# CONFIG_CHIP is not set
CONFIG_ZEPHYR_CONNECTEDHOMEIP_MODULE=y
# end of connectedhomeip (C:/ncs/v2.7.0/modules/lib/matter)

CONFIG_LIBMETAL=y
CONFIG_LIBMETAL_SRC_PATH="libmetal"
# CONFIG_LVGL is not set
# CONFIG_HAS_MEC_HAL is not set
# CONFIG_HAS_MPFS_HAL is not set
# CONFIG_HAS_MEC5_HAL is not set
CONFIG_OPENAMP=y
CONFIG_OPENAMP_SRC_PATH="open-amp"
CONFIG_OPENAMP_MASTER=y
CONFIG_OPENAMP_SLAVE=y
# CONFIG_MIPI_SYST_LIB is not set
# CONFIG_HAS_TELINK_DRIVERS is not set
# CONFIG_TINYCRYPT_CTR_PRNG is not set
CONFIG_TINYCRYPT_SHA256=y
CONFIG_TINYCRYPT_SHA256_HMAC=y
CONFIG_TINYCRYPT_SHA256_HMAC_PRNG=y
# CONFIG_TINYCRYPT_ECC_DH is not set
# CONFIG_TINYCRYPT_ECC_DSA is not set
CONFIG_TINYCRYPT_AES=y
# CONFIG_TINYCRYPT_AES_CBC is not set
# CONFIG_TINYCRYPT_AES_CTR is not set
# CONFIG_TINYCRYPT_AES_CCM is not set
CONFIG_TINYCRYPT_AES_CMAC=y
# CONFIG_MCUBOOT_BOOTUTIL_LIB is not set
# CONFIG_WIFI_NM_WPA_SUPPLICANT is not set

#
# Unavailable modules, please install those via the project manifest.
#

#
# hal_gigadevice module not available.
#

#
# Trusted-firmware-a module not available.
#

#
# THRIFT module not available.
#
# CONFIG_ACPI is not set
# end of Modules

CONFIG_BOARD="nrf5340dk"
CONFIG_BOARD_REVISION=""
CONFIG_BOARD_TARGET="nrf5340dk/nrf5340/cpuapp"
# CONFIG_NET_DRIVERS is not set
CONFIG_BOARD_NRF5340DK=y
CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP=y
CONFIG_BOARD_QUALIFIERS="nrf5340/cpuapp"

#
# Board Options
#
CONFIG_BOARD_ENABLE_DCDC_APP=y
CONFIG_BOARD_ENABLE_DCDC_NET=y
CONFIG_BOARD_ENABLE_DCDC_HV=y
CONFIG_BOARD_ENABLE_CPUNET=y
CONFIG_DOMAIN_CPUNET_BOARD="nrf5340dk/nrf5340/cpunet"
# end of Board Options

#
# Hardware Configuration
#
CONFIG_SOC_FAMILY="nordic_nrf"
CONFIG_SOC_FAMILY_NORDIC_NRF=y
CONFIG_SOC_SERIES_NRF53X=y
CONFIG_SOC_NRF5340_CPUAPP=y
CONFIG_SOC_NRF5340_CPUAPP_QKAA=y
# CONFIG_MFD is not set
# CONFIG_BUILD_OUTPUT_INFO_HEADER is not set
CONFIG_HAS_HW_NRF_CC312=y
CONFIG_HAS_HW_NRF_CLOCK=y
CONFIG_HAS_HW_NRF_CTRLAP=y
CONFIG_HAS_HW_NRF_DCNF=y
CONFIG_HAS_HW_NRF_DPPIC=y
CONFIG_HAS_HW_NRF_EGU0=y
CONFIG_HAS_HW_NRF_EGU1=y
CONFIG_HAS_HW_NRF_EGU2=y
CONFIG_HAS_HW_NRF_EGU3=y
CONFIG_HAS_HW_NRF_EGU4=y
CONFIG_HAS_HW_NRF_EGU5=y
CONFIG_HAS_HW_NRF_GPIO0=y
CONFIG_HAS_HW_NRF_GPIO1=y
CONFIG_HAS_HW_NRF_GPIOTE0=y
CONFIG_HAS_HW_NRF_IPC=y
CONFIG_HAS_HW_NRF_KMU=y
CONFIG_HAS_HW_NRF_MUTEX=y
CONFIG_HAS_HW_NRF_NVMC_PE=y
CONFIG_HAS_HW_NRF_OSCILLATORS=y
CONFIG_HAS_HW_NRF_POWER=y
CONFIG_HAS_HW_NRF_PWM0=y
CONFIG_HAS_HW_NRF_QSPI=y
CONFIG_HAS_HW_NRF_REGULATORS=y
CONFIG_HAS_HW_NRF_RESET=y
CONFIG_HAS_HW_NRF_SAADC=y
CONFIG_HAS_HW_NRF_SPIM4=y
CONFIG_HAS_HW_NRF_SPU=y
CONFIG_HAS_HW_NRF_TWIM1=y
CONFIG_HAS_HW_NRF_UARTE0=y
CONFIG_HAS_HW_NRF_USBD=y
CONFIG_HAS_HW_NRF_USBREG=y
CONFIG_HAS_HW_NRF_VMC=y
CONFIG_HAS_HW_NRF_WDT0=y
CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND_NEEDED=y
CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND=y
CONFIG_SOC_NRF53_ANOMALY_168_WORKAROUND=y
# CONFIG_SOC_NRF53_ANOMALY_168_WORKAROUND_FOR_EXECUTION_FROM_RAM is not set
CONFIG_SOC_NRF53_RTC_PRETICK=y
CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET=10
CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET=11
CONFIG_SOC_DCDC_NRF53X_APP=y
CONFIG_SOC_DCDC_NRF53X_NET=y
CONFIG_SOC_DCDC_NRF53X_HV=y
CONFIG_NRF_SPU_FLASH_REGION_ALIGNMENT=0x4000
CONFIG_NRF_SPU_RAM_REGION_SIZE=0x2000
CONFIG_NRF_SPU_RAM_REGION_ALIGNMENT=0x2000
CONFIG_SOC_NRF_GPIO_FORWARDER_FOR_NRF5340=y
CONFIG_SOC_NRF53_CPUNET_MGMT=y
CONFIG_SOC_ENABLE_LFXO=y
# CONFIG_SOC_LFXO_CAP_EXTERNAL is not set
# CONFIG_SOC_LFXO_CAP_INT_6PF is not set
CONFIG_SOC_LFXO_CAP_INT_7PF=y
# CONFIG_SOC_LFXO_CAP_INT_9PF is not set
CONFIG_SOC_HFXO_CAP_DEFAULT=y
# CONFIG_SOC_HFXO_CAP_EXTERNAL is not set
# CONFIG_SOC_HFXO_CAP_INTERNAL is not set
CONFIG_NRF_ENABLE_CACHE=y
CONFIG_NRF53_SYNC_RTC=y
# CONFIG_SYNC_RTC_LOG_LEVEL_OFF is not set
# CONFIG_SYNC_RTC_LOG_LEVEL_ERR is not set
# CONFIG_SYNC_RTC_LOG_LEVEL_WRN is not set
# CONFIG_SYNC_RTC_LOG_LEVEL_INF is not set
# CONFIG_SYNC_RTC_LOG_LEVEL_DBG is not set
CONFIG_SYNC_RTC_LOG_LEVEL_DEFAULT=y
CONFIG_SYNC_RTC_LOG_LEVEL=3
CONFIG_NRF53_SYNC_RTC_INIT_PRIORITY=90
CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=1
CONFIG_NRF53_SYNC_RTC_LOG_TIMESTAMP=y
CONFIG_NRF53_SYNC_RTC_IPM_OUT=7
CONFIG_NRF53_SYNC_RTC_IPM_IN=8
CONFIG_IPM_MSG_CH_8_ENABLE=y
CONFIG_IPM_MSG_CH_8_RX=y
CONFIG_NRF_SOC_SECURE_SUPPORTED=y
# CONFIG_NFCT_PINS_AS_GPIOS is not set
CONFIG_NRF_APPROTECT_USE_UICR=y
# CONFIG_NRF_APPROTECT_LOCK is not set
# CONFIG_NRF_APPROTECT_USER_HANDLING is not set
CONFIG_NRF_SECURE_APPROTECT_USE_UICR=y
# CONFIG_NRF_SECURE_APPROTECT_LOCK is not set
# CONFIG_NRF_SECURE_APPROTECT_USER_HANDLING is not set
# CONFIG_NRF_TRACE_PORT is not set
CONFIG_GPIO_INIT_PRIORITY=40
# CONFIG_SOC_LOG_LEVEL_OFF is not set
# CONFIG_SOC_LOG_LEVEL_ERR is not set
# CONFIG_SOC_LOG_LEVEL_WRN is not set
# CONFIG_SOC_LOG_LEVEL_INF is not set
# CONFIG_SOC_LOG_LEVEL_DBG is not set
CONFIG_SOC_LOG_LEVEL_DEFAULT=y
CONFIG_SOC_LOG_LEVEL=3
# end of Hardware Configuration

CONFIG_SOC_COMPATIBLE_NRF=y
CONFIG_SOC_COMPATIBLE_NRF53X=y
CONFIG_SOC_COMPATIBLE_NRF5340_CPUAPP=y
CONFIG_ARCH="arm"
CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT=y
# CONFIG_EXTRA_EXCEPTION_INFO is not set
CONFIG_CPU_CORTEX=y
CONFIG_KOBJECT_TEXT_AREA=256
CONFIG_ARM_MPU=y
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32
# CONFIG_MPU_ALLOW_FLASH_WRITE is not set

#
# ARM Options
#
CONFIG_ARM_ON_ENTER_CPU_IDLE_HOOK=y
CONFIG_ARM_ON_EXIT_CPU_IDLE=y
CONFIG_CPU_CORTEX_M=y
# CONFIG_ARM_ZIMAGE_HEADER is not set
CONFIG_ISA_THUMB2=y
CONFIG_ASSEMBLER_ISA_THUMB2=y
CONFIG_COMPILER_ISA_THUMB2=y
CONFIG_STACK_ALIGN_DOUBLE_WORD=y
# CONFIG_RUNTIME_NMI is not set
CONFIG_FAULT_DUMP=2
CONFIG_BUILTIN_STACK_GUARD=y
CONFIG_ARM_STACK_PROTECTION=y
CONFIG_FP16=y
CONFIG_FP16_IEEE=y
# CONFIG_FP16_ALT is not set
CONFIG_CPU_CORTEX_M33=y
CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y
CONFIG_CPU_CORTEX_M_HAS_DWT=y
CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y
CONFIG_CPU_CORTEX_M_HAS_VTOR=y
CONFIG_CPU_CORTEX_M_HAS_SPLIM=y
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y
CONFIG_CPU_CORTEX_M_HAS_CMSE=y
CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_SE=y
CONFIG_ARMV7_M_ARMV8_M_FP=y
CONFIG_ARMV8_M_DSP=y

#
# ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options
#
# CONFIG_ZERO_LATENCY_IRQS is not set
# CONFIG_SW_VECTOR_RELAY is not set
# CONFIG_CORTEX_M_DWT is not set
# CONFIG_CORTEX_M_DEBUG_MONITOR_HOOK is not set
# CONFIG_TRAP_UNALIGNED_ACCESS is not set
# end of ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options

CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE=y
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT is not set
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU is not set
CONFIG_ARM_TRUSTZONE_M=y
# CONFIG_MPU_STACK_GUARD is not set
# CONFIG_MPU_DISABLE_BACKGROUND_MAP is not set
# CONFIG_CUSTOM_SECTION_ALIGN is not set
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32
CONFIG_CPU_HAS_NRF_IDAU=y
CONFIG_HAS_SWO=y
# end of ARM Options

CONFIG_ARM=y
CONFIG_ARCH_IS_SET=y

#
# General Architecture Options
#
# CONFIG_SEMIHOST is not set
# CONFIG_ARCH_LOG_LEVEL_OFF is not set
# CONFIG_ARCH_LOG_LEVEL_ERR is not set
# CONFIG_ARCH_LOG_LEVEL_WRN is not set
# CONFIG_ARCH_LOG_LEVEL_INF is not set
# CONFIG_ARCH_LOG_LEVEL_DBG is not set
CONFIG_ARCH_LOG_LEVEL_DEFAULT=y
CONFIG_ARCH_LOG_LEVEL=3
CONFIG_LITTLE_ENDIAN=y
# CONFIG_TRUSTED_EXECUTION_SECURE is not set
# CONFIG_TRUSTED_EXECUTION_NONSECURE is not set
# CONFIG_USERSPACE is not set
CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT=100
CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES=16
CONFIG_GEN_PRIV_STACKS=y
# CONFIG_STACK_GROWS_UP is not set

#
# Interrupt Configuration
#
CONFIG_ISR_TABLES_LOCAL_DECLARATION_SUPPORTED=y
# CONFIG_ISR_TABLES_LOCAL_DECLARATION is not set
CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS=y
# CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_CODE is not set
CONFIG_EXCEPTION_DEBUG=y
# CONFIG_SIMPLIFIED_EXCEPTION_CODES is not set
# end of Interrupt Configuration
# end of General Architecture Options

CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y
CONFIG_ARCH_HAS_TRUSTED_EXECUTION=y
CONFIG_ARCH_HAS_STACK_PROTECTION=y
CONFIG_ARCH_HAS_USERSPACE=y
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y
CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y
CONFIG_ARCH_SUPPORTS_COREDUMP=y
CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT=y
CONFIG_ARCH_SUPPORTS_ROM_START=y
CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO=y
CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE=y
CONFIG_ARCH_HAS_SUSPEND_TO_RAM=y
CONFIG_ARCH_HAS_THREAD_ABORT=y
CONFIG_ARCH_HAS_CODE_DATA_RELOCATION=y
CONFIG_CPU_HAS_TEE=y
CONFIG_CPU_HAS_FPU=y
CONFIG_CPU_HAS_MPU=y
CONFIG_MPU=y
# CONFIG_MPU_LOG_LEVEL_OFF is not set
# CONFIG_MPU_LOG_LEVEL_ERR is not set
# CONFIG_MPU_LOG_LEVEL_WRN is not set
# CONFIG_MPU_LOG_LEVEL_INF is not set
# CONFIG_MPU_LOG_LEVEL_DBG is not set
CONFIG_MPU_LOG_LEVEL_DEFAULT=y
CONFIG_MPU_LOG_LEVEL=3
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS=y
CONFIG_MPU_GAP_FILLING=y
CONFIG_SRAM_REGION_PERMISSIONS=y

#
# DSP Options
#
# end of DSP Options

#
# Floating Point Options
#
# end of Floating Point Options

#
# Cache Options
#
# end of Cache Options

CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y
# CONFIG_ARCH_CPU_IDLE_CUSTOM is not set

#
# General Kernel Options
#
# CONFIG_KERNEL_LOG_LEVEL_OFF is not set
# CONFIG_KERNEL_LOG_LEVEL_ERR is not set
# CONFIG_KERNEL_LOG_LEVEL_WRN is not set
# CONFIG_KERNEL_LOG_LEVEL_INF is not set
# CONFIG_KERNEL_LOG_LEVEL_DBG is not set
CONFIG_KERNEL_LOG_LEVEL_DEFAULT=y
CONFIG_KERNEL_LOG_LEVEL=3
CONFIG_MULTITHREADING=y
CONFIG_NUM_COOP_PRIORITIES=16
CONFIG_NUM_PREEMPT_PRIORITIES=15
CONFIG_MAIN_THREAD_PRIORITY=0
CONFIG_COOP_ENABLED=y
CONFIG_PREEMPT_ENABLED=y
CONFIG_PRIORITY_CEILING=-127
# CONFIG_SCHED_DEADLINE is not set
CONFIG_THREAD_STACK_INFO=y
# CONFIG_THREAD_CUSTOM_DATA is not set
# CONFIG_DYNAMIC_THREAD is not set
CONFIG_SCHED_DUMB=y
# CONFIG_SCHED_SCALABLE is not set
# CONFIG_SCHED_MULTIQ is not set
# CONFIG_WAITQ_SCALABLE is not set
CONFIG_WAITQ_DUMB=y

#
# Misc Kernel related options
#
CONFIG_LIBC_ERRNO=y
CONFIG_ERRNO=y
CONFIG_CURRENT_THREAD_USE_TLS=y
# end of Misc Kernel related options

#
# Kernel Debugging and Metrics
#
CONFIG_BOOT_DELAY=0
# CONFIG_THREAD_MONITOR is not set
# CONFIG_THREAD_NAME is not set
# CONFIG_THREAD_RUNTIME_STATS is not set
# end of Kernel Debugging and Metrics

# CONFIG_OBJ_CORE is not set

#
# System Work Queue Options
#
# CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
# end of System Work Queue Options

#
# Barrier Operations
#
CONFIG_BARRIER_OPERATIONS_ARCH=y
# end of Barrier Operations

#
# Atomic Operations
#
CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
# end of Atomic Operations

#
# Timer API Options
#
CONFIG_TIMESLICING=y
CONFIG_TIMESLICE_SIZE=0
CONFIG_TIMESLICE_PRIORITY=0
# CONFIG_TIMESLICE_PER_THREAD is not set
# end of Timer API Options

#
# Other Kernel Object Options
#
CONFIG_POLL=y
# CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
CONFIG_NUM_MBOX_ASYNC_MSGS=10
# CONFIG_EVENTS is not set
# CONFIG_PIPES is not set
CONFIG_KERNEL_MEM_POOL=y
# CONFIG_HEAP_MEM_POOL_IGNORE_MIN is not set
# end of Other Kernel Object Options

CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y
CONFIG_SWAP_NONATOMIC=y
CONFIG_SYS_CLOCK_EXISTS=y
CONFIG_TIMEOUT_64BIT=y
CONFIG_SYS_CLOCK_MAX_TIMEOUT_DAYS=365

#
# Security Options
#
# end of Security Options

#
# Memory Domains
#
CONFIG_ARCH_MEM_DOMAIN_SUPPORTS_ISOLATED_STACKS=y
CONFIG_MEM_DOMAIN_ISOLATED_STACKS=y
# end of Memory Domains

#
# SMP Options
#
CONFIG_MP_NUM_CPUS=1
# CONFIG_TICKET_SPINLOCKS is not set
# end of SMP Options

CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE=y
CONFIG_THREAD_LOCAL_STORAGE=y
# end of General Kernel Options

#
# Device Options
#
# CONFIG_DEVICE_DEPS is not set
# CONFIG_DEVICE_MUTABLE is not set
# end of Device Options

#
# Initialization Priorities
#
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
CONFIG_APPLICATION_INIT_PRIORITY=90
# end of Initialization Priorities

#
# Virtual Memory Support
#
# end of Virtual Memory Support

#
# Device Drivers
#
# CONFIG_ADC is not set
# CONFIG_AUDIO is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_BBRAM is not set

#
# Bluetooth HCI Driver Options
#
# CONFIG_BT_H4 is not set
# CONFIG_BT_H5 is not set
# CONFIG_BT_RPMSG is not set
CONFIG_BT_HCI_IPC=y
# CONFIG_BT_SPI is not set
# CONFIG_BT_STM32_IPM is not set
# CONFIG_BT_ESP32 is not set
# CONFIG_BT_B91 is not set
# CONFIG_BT_PSOC6_BLESS is not set
# CONFIG_BT_DA1469X is not set
# CONFIG_BT_NO_DRIVER is not set
# CONFIG_BT_AMBIQ_HCI is not set
CONFIG_BT_DRV_TX_STACK_SIZE=256
CONFIG_BT_DRV_RX_STACK_SIZE=256
# CONFIG_CAN is not set
# CONFIG_CHARGER is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF is not set
# CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG is not set
CONFIG_CLOCK_CONTROL_LOG_LEVEL_DEFAULT=y
CONFIG_CLOCK_CONTROL_LOG_LEVEL=3
CONFIG_CLOCK_CONTROL_NRF=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM is not set
CONFIG_CLOCK_CONTROL_NRF_ACCURACY=50
# CONFIG_CLOCK_CONTROL_FIXED_RATE_CLOCK is not set
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128
CONFIG_CONSOLE_HAS_DRIVER=y
# CONFIG_CONSOLE_HANDLER is not set
CONFIG_CONSOLE_INIT_PRIORITY=60
CONFIG_UART_CONSOLE=y
# CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS is not set
# CONFIG_UART_CONSOLE_MCUMGR is not set
# CONFIG_RAM_CONSOLE is not set
# CONFIG_IPM_CONSOLE_SENDER is not set
# CONFIG_IPM_CONSOLE_RECEIVER is not set
# CONFIG_UART_MCUMGR is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_OFF is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_ERR is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_WRN is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_INF is not set
# CONFIG_UART_CONSOLE_LOG_LEVEL_DBG is not set
CONFIG_UART_CONSOLE_LOG_LEVEL_DEFAULT=y
CONFIG_UART_CONSOLE_LOG_LEVEL=3
# CONFIG_GSM_MUX is not set
# CONFIG_EFI_CONSOLE is not set
# CONFIG_COREDUMP_DEVICE is not set
# CONFIG_CRYPTO is not set
# CONFIG_DAC is not set
# CONFIG_DAI is not set
# CONFIG_DISK_DRIVERS is not set
# CONFIG_DISPLAY is not set
# CONFIG_DMA is not set
# CONFIG_EDAC is not set
# CONFIG_EEPROM is not set
# CONFIG_ENTROPY_GENERATOR is not set
# CONFIG_ESPI is not set
# CONFIG_FLASH is not set
# CONFIG_FPGA is not set
# CONFIG_FUEL_GAUGE is not set
# CONFIG_GNSS is not set
# CONFIG_GPIO_LOG_LEVEL_OFF is not set
# CONFIG_GPIO_LOG_LEVEL_ERR is not set
# CONFIG_GPIO_LOG_LEVEL_WRN is not set
# CONFIG_GPIO_LOG_LEVEL_INF is not set
# CONFIG_GPIO_LOG_LEVEL_DBG is not set
CONFIG_GPIO_LOG_LEVEL_DEFAULT=y
CONFIG_GPIO_LOG_LEVEL=3
# CONFIG_GPIO_GET_DIRECTION is not set
# CONFIG_GPIO_GET_CONFIG is not set
# CONFIG_GPIO_HOGS is not set
# CONFIG_GPIO_ENABLE_DISABLE_INTERRUPT is not set
CONFIG_GPIO_NRFX=y
CONFIG_GPIO_NRFX_INTERRUPT=y
# CONFIG_HWINFO is not set
# CONFIG_HWSPINLOCK is not set
# CONFIG_I2C is not set
# CONFIG_I2S is not set
# CONFIG_I3C is not set

#
# Interrupt controller drivers
#
CONFIG_INTC_INIT_PRIORITY=40
# CONFIG_INTC_LOG_LEVEL_OFF is not set
# CONFIG_INTC_LOG_LEVEL_ERR is not set
# CONFIG_INTC_LOG_LEVEL_WRN is not set
# CONFIG_INTC_LOG_LEVEL_INF is not set
# CONFIG_INTC_LOG_LEVEL_DBG is not set
CONFIG_INTC_LOG_LEVEL_DEFAULT=y
CONFIG_INTC_LOG_LEVEL=3
# CONFIG_INTC_ESP32 is not set
# end of Interrupt controller drivers

# CONFIG_IPM is not set
# CONFIG_KSCAN is not set
# CONFIG_LED is not set
# CONFIG_LED_STRIP is not set
# CONFIG_LORA is not set
CONFIG_MBOX_INIT_PRIORITY=40
# CONFIG_MBOX_LOG_LEVEL_OFF is not set
# CONFIG_MBOX_LOG_LEVEL_ERR is not set
# CONFIG_MBOX_LOG_LEVEL_WRN is not set
# CONFIG_MBOX_LOG_LEVEL_INF is not set
# CONFIG_MBOX_LOG_LEVEL_DBG is not set
CONFIG_MBOX_LOG_LEVEL_DEFAULT=y
CONFIG_MBOX_LOG_LEVEL=3
# CONFIG_MDIO is not set
# CONFIG_MIPI_DBI is not set

#
# Miscellaneous Drivers
#
# CONFIG_TIMEAWARE_GPIO is not set
# end of Miscellaneous Drivers

# CONFIG_MM_DRV is not set
# CONFIG_PCIE is not set
# CONFIG_PCIE_ENDPOINT is not set
# CONFIG_PECI is not set
# CONFIG_PINCTRL_LOG_LEVEL_OFF is not set
# CONFIG_PINCTRL_LOG_LEVEL_ERR is not set
# CONFIG_PINCTRL_LOG_LEVEL_WRN is not set
# CONFIG_PINCTRL_LOG_LEVEL_INF is not set
# CONFIG_PINCTRL_LOG_LEVEL_DBG is not set
CONFIG_PINCTRL_LOG_LEVEL_DEFAULT=y
CONFIG_PINCTRL_LOG_LEVEL=3
CONFIG_PINCTRL_STORE_REG=y
# CONFIG_PINCTRL_DYNAMIC is not set
CONFIG_PINCTRL_NRF=y
# CONFIG_PM_CPU_OPS is not set
# CONFIG_PS2 is not set
# CONFIG_PTP_CLOCK is not set
# CONFIG_PWM is not set
# CONFIG_REGULATOR is not set
# CONFIG_RETAINED_MEM is not set
# CONFIG_RTC is not set
# CONFIG_SDHC is not set

#
# Capabilities
#
CONFIG_SERIAL_HAS_DRIVER=y
CONFIG_SERIAL_SUPPORT_ASYNC=y
CONFIG_SERIAL_SUPPORT_INTERRUPT=y
# CONFIG_UART_LOG_LEVEL_OFF is not set
# CONFIG_UART_LOG_LEVEL_ERR is not set
# CONFIG_UART_LOG_LEVEL_WRN is not set
# CONFIG_UART_LOG_LEVEL_INF is not set
# CONFIG_UART_LOG_LEVEL_DBG is not set
CONFIG_UART_LOG_LEVEL_DEFAULT=y
CONFIG_UART_LOG_LEVEL=3
# CONFIG_UART_ASYNC_API is not set
# CONFIG_UART_LINE_CTRL is not set
# CONFIG_UART_DRV_CMD is not set
# CONFIG_UART_WIDE_DATA is not set
# CONFIG_UART_PIPE is not set
# CONFIG_UART_ASYNC_RX_HELPER is not set

#
# Serial Drivers
#
CONFIG_UART_NRFX=y
CONFIG_UART_NRFX_UARTE=y
CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=y
CONFIG_UART_0_ENHANCED_POLL_OUT=y
# CONFIG_UART_0_NRF_PARITY_BIT is not set
CONFIG_UART_0_NRF_TX_BUFFER_SIZE=32
# CONFIG_SMBUS is not set

#
# Timer drivers
#
# CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
# CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
CONFIG_TICKLESS_CAPABLE=y
CONFIG_SYSTEM_TIMER_HAS_DISABLE_SUPPORT=y
# CONFIG_NRF_RTC_TIMER_TRIGGER_OVERFLOW is not set
# CONFIG_SYSTEM_CLOCK_NO_WAIT is not set
# CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY is not set
CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY=y
# end of Timer drivers

# CONFIG_USB_BC12 is not set
# CONFIG_UDC_DRIVER is not set
# CONFIG_UHC_DRIVER is not set
# CONFIG_UVB is not set
# CONFIG_USB_DEVICE_DRIVER is not set
# CONFIG_NRF_USBD_COMMON_LOG_LEVEL_OFF is not set
# CONFIG_NRF_USBD_COMMON_LOG_LEVEL_ERR is not set
# CONFIG_NRF_USBD_COMMON_LOG_LEVEL_WRN is not set
# CONFIG_NRF_USBD_COMMON_LOG_LEVEL_INF is not set
# CONFIG_NRF_USBD_COMMON_LOG_LEVEL_DBG is not set
CONFIG_NRF_USBD_COMMON_LOG_LEVEL_DEFAULT=y
CONFIG_NRF_USBD_COMMON_LOG_LEVEL=3
# CONFIG_NRF_USBD_COMMON is not set
# CONFIG_USBC_TCPC_DRIVER is not set
# CONFIG_USBC_LOG_LEVEL_OFF is not set
# CONFIG_USBC_LOG_LEVEL_ERR is not set
# CONFIG_USBC_LOG_LEVEL_WRN is not set
# CONFIG_USBC_LOG_LEVEL_INF is not set
# CONFIG_USBC_LOG_LEVEL_DBG is not set
CONFIG_USBC_LOG_LEVEL_DEFAULT=y
CONFIG_USBC_LOG_LEVEL=3
# CONFIG_USBC_VBUS_DRIVER is not set
# CONFIG_USBC_PPC_DRIVER is not set
# CONFIG_VIDEO is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_W1 is not set
# end of Device Drivers

# CONFIG_REQUIRES_FULL_LIBC is not set
# CONFIG_REQUIRES_FLOAT_PRINTF is not set
CONFIG_FULL_LIBC_SUPPORTED=y
CONFIG_MINIMAL_LIBC_SUPPORTED=y
CONFIG_NEWLIB_LIBC_SUPPORTED=y
CONFIG_PICOLIBC_SUPPORTED=y

#
# C Library
#
# CONFIG_MINIMAL_LIBC is not set
CONFIG_PICOLIBC=y
# CONFIG_NEWLIB_LIBC is not set
# CONFIG_EXTERNAL_LIBC is not set
CONFIG_HAS_NEWLIB_LIBC_NANO=y
CONFIG_COMMON_LIBC_ABORT=y
CONFIG_COMMON_LIBC_MALLOC=y
CONFIG_COMMON_LIBC_CALLOC=y
CONFIG_COMMON_LIBC_REALLOCARRAY=y
# CONFIG_PICOLIBC_USE_MODULE is not set
CONFIG_PICOLIBC_USE_TOOLCHAIN=y
CONFIG_PICOLIBC_HEAP_SIZE=-2
# CONFIG_PICOLIBC_IO_FLOAT is not set
CONFIG_PICOLIBC_IO_LONG_LONG=y
CONFIG_STDOUT_CONSOLE=y
CONFIG_NEED_LIBC_MEM_PARTITION=y
# end of C Library

#
# C++ Language Support
#
# CONFIG_CPP is not set

#
# Deprecated
#
# CONFIG_CPLUSPLUS is not set
# CONFIG_LIB_CPLUSPLUS is not set
# end of Deprecated
# end of C++ Language Support

# CONFIG_CRC is not set

#
# Additional libraries
#

#
# Hash Function Support
#
# CONFIG_SYS_HASH_FUNC32 is not set
# end of Hash Function Support

#
# Hashmap (Hash Table) Support
#
# CONFIG_SYS_HASH_MAP is not set
# end of Hashmap (Hash Table) Support

#
# Heap and Memory Allocation
#
# CONFIG_SYS_HEAP_VALIDATE is not set
# CONFIG_SYS_HEAP_STRESS is not set
# CONFIG_SYS_HEAP_INFO is not set
CONFIG_SYS_HEAP_ALLOC_LOOPS=3
# CONFIG_SYS_HEAP_RUNTIME_STATS is not set
# CONFIG_SYS_HEAP_LISTENER is not set
# CONFIG_SYS_HEAP_SMALL_ONLY is not set
# CONFIG_SYS_HEAP_BIG_ONLY is not set
CONFIG_SYS_HEAP_AUTO=y
# CONFIG_MULTI_HEAP is not set
# CONFIG_SHARED_MULTI_HEAP is not set
# end of Heap and Memory Allocation

#
# Memory Blocks
#
# CONFIG_SYS_MEM_BLOCKS is not set
# end of Memory Blocks

#
# OS Support Library
#
# CONFIG_FDTABLE is not set
# CONFIG_PRINTK_SYNC is not set
CONFIG_MPSC_PBUF=y
# CONFIG_SPSC_PBUF is not set
# CONFIG_MPSC_CLEAR_ALLOCATED is not set
CONFIG_HAS_POWEROFF=y
# CONFIG_POWEROFF is not set
CONFIG_CBPRINTF_COMPLETE=y
# CONFIG_CBPRINTF_NANO is not set
CONFIG_CBPRINTF_FULL_INTEGRAL=y
# CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
# CONFIG_CBPRINTF_FP_SUPPORT is not set
# CONFIG_CBPRINTF_FP_A_SUPPORT is not set
# CONFIG_CBPRINTF_LIBC_SUBSTS is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_OFF is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_ERR is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_WRN is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_INF is not set
# CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_DBG is not set
CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL_DEFAULT=y
CONFIG_CBPRINTF_PACKAGE_LOG_LEVEL=3
# CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
CONFIG_CBPRINTF_CONVERT_CHECK_PTR=y
# end of OS Support Library

#
# POSIX API Support
#

#
# POSIX Options
#
# CONFIG_POSIX_API is not set
# CONFIG_POSIX_ASYNCHRONOUS_IO is not set
# CONFIG_POSIX_CLOCK is not set
# CONFIG_POSIX_CONFSTR is not set
# CONFIG_POSIX_ENV is not set
# CONFIG_POSIX_ENV_LOG_LEVEL_OFF is not set
# CONFIG_POSIX_ENV_LOG_LEVEL_ERR is not set
# CONFIG_POSIX_ENV_LOG_LEVEL_WRN is not set
# CONFIG_POSIX_ENV_LOG_LEVEL_INF is not set
# CONFIG_POSIX_ENV_LOG_LEVEL_DBG is not set
CONFIG_POSIX_ENV_LOG_LEVEL_DEFAULT=y
CONFIG_POSIX_ENV_LOG_LEVEL=3
# CONFIG_EVENTFD is not set

#
# File descriptor table options
#
# end of File descriptor table options

# CONFIG_FNMATCH is not set
# CONFIG_POSIX_MQUEUE is not set

#
# sem_t support
#
CONFIG_SEM_VALUE_MAX=32767
CONFIG_SEM_NAMELEN_MAX=16
# end of sem_t support

#
# Signal support
#
CONFIG_POSIX_RTSIG_MAX=0
# CONFIG_POSIX_SIGNAL is not set
# end of Signal support

# CONFIG_POSIX_PUTMSG is not set

#
# Sysconf support
#
# CONFIG_POSIX_SYSCONF is not set
CONFIG_POSIX_PAGE_SIZE_BITS=6
# end of Sysconf support

# CONFIG_POSIX_SYSLOG is not set
# CONFIG_TIMER is not set
# CONFIG_POSIX_UNAME is not set
# end of POSIX Options

#
# POSIX Shell Utilities
#
# end of POSIX Shell Utilities
# end of POSIX API Support

# CONFIG_OPENAMP_RSC_TABLE is not set
# CONFIG_SMF is not set
CONFIG_LIBGCC_RTLIB=y

#
# Utility Library
#
# CONFIG_JSON_LIBRARY is not set
# CONFIG_RING_BUFFER is not set
CONFIG_NOTIFY=y
# CONFIG_BASE64 is not set
CONFIG_ONOFF=y
# CONFIG_WINSTREAM is not set
# CONFIG_UTF8 is not set
# end of Utility Library
# end of Additional libraries

#
# Subsystems and OS Services
#
# CONFIG_BINDESC is not set
CONFIG_BT=y
CONFIG_BT_HCI=y
# CONFIG_BT_CUSTOM is not set
# CONFIG_BT_HCI_RAW is not set
# CONFIG_BT_HCI_RAW_H4 is not set
# CONFIG_BT_HCI_RAW_CMD_EXT is not set
CONFIG_BT_CONN_TX=y
# CONFIG_BT_SCA_UPDATE is not set
# CONFIG_BT_TRANSMIT_POWER_CONTROL is not set
# CONFIG_BT_ISO_PERIPHERAL is not set
# CONFIG_BT_ISO_CENTRAL is not set
# CONFIG_BT_ISO_BROADCASTER is not set
# CONFIG_BT_ISO_SYNC_RECEIVER is not set

#
# Bluetooth buffer configuration
#
# end of Bluetooth buffer configuration

#
# Bluetooth Host
#

#
# L2CAP Options
#
# end of L2CAP Options

#
# ATT and GATT Options
#
# end of ATT and GATT Options

#
# GATT Services
#
# end of GATT Services

#
# Bluetooth Classic Options
#
# end of Bluetooth Classic Options
# end of Bluetooth Host

# CONFIG_BT_CTLR_DEBUG_PINS_CPUAPP is not set
# CONFIG_BT_SHELL is not set
# CONFIG_BT_EAD is not set
CONFIG_BT_LOG=y

#
# Bluetooth logging
#
# CONFIG_BT_LOG_LEVEL_OFF is not set
# CONFIG_BT_LOG_LEVEL_ERR is not set
# CONFIG_BT_LOG_LEVEL_WRN is not set
# CONFIG_BT_LOG_LEVEL_INF is not set
# CONFIG_BT_LOG_LEVEL_DBG is not set
CONFIG_BT_LOG_LEVEL_DEFAULT=y
CONFIG_BT_LOG_LEVEL=3
CONFIG_BT_HCI_DRIVER_LOG_LEVEL_INHERIT=y
CONFIG_BT_HCI_DRIVER_LOG_LEVEL=3
# CONFIG_BT_HCI_DRIVER_LOG_LEVEL_OFF is not set
# CONFIG_BT_HCI_DRIVER_LOG_LEVEL_ERR is not set
# CONFIG_BT_HCI_DRIVER_LOG_LEVEL_WRN is not set
# CONFIG_BT_HCI_DRIVER_LOG_LEVEL_INF is not set
# CONFIG_BT_HCI_DRIVER_LOG_LEVEL_DBG is not set
# CONFIG_BT_HCI_DRIVER_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_RPA_LOG_LEVEL_INHERIT=y
CONFIG_BT_RPA_LOG_LEVEL=3
# CONFIG_BT_RPA_LOG_LEVEL_OFF is not set
# CONFIG_BT_RPA_LOG_LEVEL_ERR is not set
# CONFIG_BT_RPA_LOG_LEVEL_WRN is not set
# CONFIG_BT_RPA_LOG_LEVEL_INF is not set
# CONFIG_BT_RPA_LOG_LEVEL_DBG is not set
# CONFIG_BT_RPA_LOG_LEVEL_DEFAULT is not set

#
# Audio
#
CONFIG_BT_AICS_LOG_LEVEL_INHERIT=y
CONFIG_BT_AICS_LOG_LEVEL=3
# CONFIG_BT_AICS_LOG_LEVEL_OFF is not set
# CONFIG_BT_AICS_LOG_LEVEL_ERR is not set
# CONFIG_BT_AICS_LOG_LEVEL_WRN is not set
# CONFIG_BT_AICS_LOG_LEVEL_INF is not set
# CONFIG_BT_AICS_LOG_LEVEL_DBG is not set
# CONFIG_BT_AICS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_AICS_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_AICS_CLIENT_LOG_LEVEL=3
# CONFIG_BT_AICS_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_AICS_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_AICS_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_AICS_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_AICS_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_AICS_CLIENT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_STREAM_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_STREAM_LOG_LEVEL=3
# CONFIG_BT_BAP_STREAM_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_STREAM_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_STREAM_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_STREAM_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_STREAM_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_STREAM_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_BASE_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_BASE_LOG_LEVEL=3
# CONFIG_BT_BAP_BASE_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_BASE_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_BASE_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_BASE_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_BASE_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_BASE_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_INHERIT=y
CONFIG_BT_AUDIO_CODEC_LOG_LEVEL=3
# CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_OFF is not set
# CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_ERR is not set
# CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_WRN is not set
# CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_INF is not set
# CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_DBG is not set
# CONFIG_BT_AUDIO_CODEC_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_ASCS_LOG_LEVEL_INHERIT=y
CONFIG_BT_ASCS_LOG_LEVEL=3
# CONFIG_BT_ASCS_LOG_LEVEL_OFF is not set
# CONFIG_BT_ASCS_LOG_LEVEL_ERR is not set
# CONFIG_BT_ASCS_LOG_LEVEL_WRN is not set
# CONFIG_BT_ASCS_LOG_LEVEL_INF is not set
# CONFIG_BT_ASCS_LOG_LEVEL_DBG is not set
# CONFIG_BT_ASCS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL=3
# CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_UNICAST_SERVER_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL=3
# CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_UNICAST_CLIENT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL=3
# CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_BROADCAST_SOURCE_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL=3
# CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_BROADCAST_SINK_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL=3
# CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_SCAN_DELEGATOR_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL=3
# CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_BROADCAST_ASSISTANT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_BAP_ISO_LOG_LEVEL_INHERIT=y
CONFIG_BT_BAP_ISO_LOG_LEVEL=3
# CONFIG_BT_BAP_ISO_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAP_ISO_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAP_ISO_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAP_ISO_LOG_LEVEL_INF is not set
# CONFIG_BT_BAP_ISO_LOG_LEVEL_DBG is not set
# CONFIG_BT_BAP_ISO_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_INHERIT=y
CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL=3
# CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_OFF is not set
# CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_ERR is not set
# CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_WRN is not set
# CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_INF is not set
# CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_DBG is not set
# CONFIG_BT_CAP_ACCEPTOR_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_INHERIT=y
CONFIG_BT_CAP_INITIATOR_LOG_LEVEL=3
# CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_OFF is not set
# CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_ERR is not set
# CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_WRN is not set
# CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_INF is not set
# CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_DBG is not set
# CONFIG_BT_CAP_INITIATOR_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_INHERIT=y
CONFIG_BT_CAP_COMMANDER_LOG_LEVEL=3
# CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_OFF is not set
# CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_ERR is not set
# CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_WRN is not set
# CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_INF is not set
# CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_DBG is not set
# CONFIG_BT_CAP_COMMANDER_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CAP_COMMON_LOG_LEVEL_INHERIT=y
CONFIG_BT_CAP_COMMON_LOG_LEVEL=3
# CONFIG_BT_CAP_COMMON_LOG_LEVEL_OFF is not set
# CONFIG_BT_CAP_COMMON_LOG_LEVEL_ERR is not set
# CONFIG_BT_CAP_COMMON_LOG_LEVEL_WRN is not set
# CONFIG_BT_CAP_COMMON_LOG_LEVEL_INF is not set
# CONFIG_BT_CAP_COMMON_LOG_LEVEL_DBG is not set
# CONFIG_BT_CAP_COMMON_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CAP_STREAM_LOG_LEVEL_INHERIT=y
CONFIG_BT_CAP_STREAM_LOG_LEVEL=3
# CONFIG_BT_CAP_STREAM_LOG_LEVEL_OFF is not set
# CONFIG_BT_CAP_STREAM_LOG_LEVEL_ERR is not set
# CONFIG_BT_CAP_STREAM_LOG_LEVEL_WRN is not set
# CONFIG_BT_CAP_STREAM_LOG_LEVEL_INF is not set
# CONFIG_BT_CAP_STREAM_LOG_LEVEL_DBG is not set
# CONFIG_BT_CAP_STREAM_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_INHERIT=y
CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL=3
# CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_OFF is not set
# CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_ERR is not set
# CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_WRN is not set
# CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_INF is not set
# CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_DBG is not set
# CONFIG_BT_CSIP_SET_MEMBER_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_INHERIT=y
CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL=3
# CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_OFF is not set
# CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_ERR is not set
# CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_WRN is not set
# CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_INF is not set
# CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_DBG is not set
# CONFIG_BT_CSIP_SET_COORDINATOR_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_INHERIT=y
CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL=3
# CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_OFF is not set
# CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_ERR is not set
# CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_WRN is not set
# CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_INF is not set
# CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_DBG is not set
# CONFIG_BT_CSIP_SET_MEMBER_CRYPTO_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_HAS_LOG_LEVEL_INHERIT=y
CONFIG_BT_HAS_LOG_LEVEL=3
# CONFIG_BT_HAS_LOG_LEVEL_OFF is not set
# CONFIG_BT_HAS_LOG_LEVEL_ERR is not set
# CONFIG_BT_HAS_LOG_LEVEL_WRN is not set
# CONFIG_BT_HAS_LOG_LEVEL_INF is not set
# CONFIG_BT_HAS_LOG_LEVEL_DBG is not set
# CONFIG_BT_HAS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_HAS_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_HAS_CLIENT_LOG_LEVEL=3
# CONFIG_BT_HAS_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_HAS_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_HAS_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_HAS_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_HAS_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_HAS_CLIENT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MCS_LOG_LEVEL_INHERIT=y
CONFIG_BT_MCS_LOG_LEVEL=3
# CONFIG_BT_MCS_LOG_LEVEL_OFF is not set
# CONFIG_BT_MCS_LOG_LEVEL_ERR is not set
# CONFIG_BT_MCS_LOG_LEVEL_WRN is not set
# CONFIG_BT_MCS_LOG_LEVEL_INF is not set
# CONFIG_BT_MCS_LOG_LEVEL_DBG is not set
# CONFIG_BT_MCS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MCC_LOG_LEVEL_INHERIT=y
CONFIG_BT_MCC_LOG_LEVEL=3
# CONFIG_BT_MCC_LOG_LEVEL_OFF is not set
# CONFIG_BT_MCC_LOG_LEVEL_ERR is not set
# CONFIG_BT_MCC_LOG_LEVEL_WRN is not set
# CONFIG_BT_MCC_LOG_LEVEL_INF is not set
# CONFIG_BT_MCC_LOG_LEVEL_DBG is not set
# CONFIG_BT_MCC_LOG_LEVEL_DEFAULT is not set
CONFIG_MCTL_LOG_LEVEL_INHERIT=y
CONFIG_MCTL_LOG_LEVEL=3
# CONFIG_MCTL_LOG_LEVEL_OFF is not set
# CONFIG_MCTL_LOG_LEVEL_ERR is not set
# CONFIG_MCTL_LOG_LEVEL_WRN is not set
# CONFIG_MCTL_LOG_LEVEL_INF is not set
# CONFIG_MCTL_LOG_LEVEL_DBG is not set
# CONFIG_MCTL_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_INHERIT=y
CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL=3
# CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_OFF is not set
# CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_ERR is not set
# CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_WRN is not set
# CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_INF is not set
# CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_DBG is not set
# CONFIG_BT_MICP_MIC_DEV_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_INHERIT=y
CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL=3
# CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_OFF is not set
# CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_ERR is not set
# CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_WRN is not set
# CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_INF is not set
# CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_DBG is not set
# CONFIG_BT_MICP_MIC_CTLR_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MPL_LOG_LEVEL_INHERIT=y
CONFIG_BT_MPL_LOG_LEVEL=3
# CONFIG_BT_MPL_LOG_LEVEL_OFF is not set
# CONFIG_BT_MPL_LOG_LEVEL_ERR is not set
# CONFIG_BT_MPL_LOG_LEVEL_WRN is not set
# CONFIG_BT_MPL_LOG_LEVEL_INF is not set
# CONFIG_BT_MPL_LOG_LEVEL_DBG is not set
# CONFIG_BT_MPL_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_PACS_LOG_LEVEL_INHERIT=y
CONFIG_BT_PACS_LOG_LEVEL=3
# CONFIG_BT_PACS_LOG_LEVEL_OFF is not set
# CONFIG_BT_PACS_LOG_LEVEL_ERR is not set
# CONFIG_BT_PACS_LOG_LEVEL_WRN is not set
# CONFIG_BT_PACS_LOG_LEVEL_INF is not set
# CONFIG_BT_PACS_LOG_LEVEL_DBG is not set
# CONFIG_BT_PACS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_TBS_LOG_LEVEL_INHERIT=y
CONFIG_BT_TBS_LOG_LEVEL=3
# CONFIG_BT_TBS_LOG_LEVEL_OFF is not set
# CONFIG_BT_TBS_LOG_LEVEL_ERR is not set
# CONFIG_BT_TBS_LOG_LEVEL_WRN is not set
# CONFIG_BT_TBS_LOG_LEVEL_INF is not set
# CONFIG_BT_TBS_LOG_LEVEL_DBG is not set
# CONFIG_BT_TBS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_TBS_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_TBS_CLIENT_LOG_LEVEL=3
# CONFIG_BT_TBS_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_TBS_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_TBS_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_TBS_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_TBS_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_TBS_CLIENT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_INHERIT=y
CONFIG_BT_VCP_VOL_REND_LOG_LEVEL=3
# CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_OFF is not set
# CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_ERR is not set
# CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_WRN is not set
# CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_INF is not set
# CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_DBG is not set
# CONFIG_BT_VCP_VOL_REND_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_INHERIT=y
CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL=3
# CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_OFF is not set
# CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_ERR is not set
# CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_WRN is not set
# CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_INF is not set
# CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_DBG is not set
# CONFIG_BT_VCP_VOL_CTLR_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_VOCS_LOG_LEVEL_INHERIT=y
CONFIG_BT_VOCS_LOG_LEVEL=3
# CONFIG_BT_VOCS_LOG_LEVEL_OFF is not set
# CONFIG_BT_VOCS_LOG_LEVEL_ERR is not set
# CONFIG_BT_VOCS_LOG_LEVEL_WRN is not set
# CONFIG_BT_VOCS_LOG_LEVEL_INF is not set
# CONFIG_BT_VOCS_LOG_LEVEL_DBG is not set
# CONFIG_BT_VOCS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_VOCS_CLIENT_LOG_LEVEL=3
# CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_VOCS_CLIENT_LOG_LEVEL_DEFAULT is not set
# CONFIG_BT_PBP_LOG_LEVEL_OFF is not set
# CONFIG_BT_PBP_LOG_LEVEL_ERR is not set
# CONFIG_BT_PBP_LOG_LEVEL_WRN is not set
# CONFIG_BT_PBP_LOG_LEVEL_INF is not set
# CONFIG_BT_PBP_LOG_LEVEL_DBG is not set
CONFIG_BT_PBP_LOG_LEVEL_DEFAULT=y
CONFIG_BT_PBP_LOG_LEVEL=3
# end of Audio

#
# Others
#
CONFIG_BT_CRYPTO_LOG_LEVEL_INHERIT=y
CONFIG_BT_CRYPTO_LOG_LEVEL=3
# CONFIG_BT_CRYPTO_LOG_LEVEL_OFF is not set
# CONFIG_BT_CRYPTO_LOG_LEVEL_ERR is not set
# CONFIG_BT_CRYPTO_LOG_LEVEL_WRN is not set
# CONFIG_BT_CRYPTO_LOG_LEVEL_INF is not set
# CONFIG_BT_CRYPTO_LOG_LEVEL_DBG is not set
# CONFIG_BT_CRYPTO_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_ATT_LOG_LEVEL_INHERIT=y
CONFIG_BT_ATT_LOG_LEVEL=3
# CONFIG_BT_ATT_LOG_LEVEL_OFF is not set
# CONFIG_BT_ATT_LOG_LEVEL_ERR is not set
# CONFIG_BT_ATT_LOG_LEVEL_WRN is not set
# CONFIG_BT_ATT_LOG_LEVEL_INF is not set
# CONFIG_BT_ATT_LOG_LEVEL_DBG is not set
# CONFIG_BT_ATT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_GATT_LOG_LEVEL_INHERIT=y
CONFIG_BT_GATT_LOG_LEVEL=3
# CONFIG_BT_GATT_LOG_LEVEL_OFF is not set
# CONFIG_BT_GATT_LOG_LEVEL_ERR is not set
# CONFIG_BT_GATT_LOG_LEVEL_WRN is not set
# CONFIG_BT_GATT_LOG_LEVEL_INF is not set
# CONFIG_BT_GATT_LOG_LEVEL_DBG is not set
# CONFIG_BT_GATT_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_L2CAP_LOG_LEVEL_INHERIT=y
CONFIG_BT_L2CAP_LOG_LEVEL=3
# CONFIG_BT_L2CAP_LOG_LEVEL_OFF is not set
# CONFIG_BT_L2CAP_LOG_LEVEL_ERR is not set
# CONFIG_BT_L2CAP_LOG_LEVEL_WRN is not set
# CONFIG_BT_L2CAP_LOG_LEVEL_INF is not set
# CONFIG_BT_L2CAP_LOG_LEVEL_DBG is not set
# CONFIG_BT_L2CAP_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_EAD_LOG_LEVEL_INHERIT=y
CONFIG_BT_EAD_LOG_LEVEL=3
# CONFIG_BT_EAD_LOG_LEVEL_OFF is not set
# CONFIG_BT_EAD_LOG_LEVEL_ERR is not set
# CONFIG_BT_EAD_LOG_LEVEL_WRN is not set
# CONFIG_BT_EAD_LOG_LEVEL_INF is not set
# CONFIG_BT_EAD_LOG_LEVEL_DBG is not set
# CONFIG_BT_EAD_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_DF_LOG_LEVEL_INHERIT=y
CONFIG_BT_DF_LOG_LEVEL=3
# CONFIG_BT_DF_LOG_LEVEL_OFF is not set
# CONFIG_BT_DF_LOG_LEVEL_ERR is not set
# CONFIG_BT_DF_LOG_LEVEL_WRN is not set
# CONFIG_BT_DF_LOG_LEVEL_INF is not set
# CONFIG_BT_DF_LOG_LEVEL_DBG is not set
# CONFIG_BT_DF_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_SETTINGS_LOG_LEVEL_INHERIT=y
CONFIG_BT_SETTINGS_LOG_LEVEL=3
# CONFIG_BT_SETTINGS_LOG_LEVEL_OFF is not set
# CONFIG_BT_SETTINGS_LOG_LEVEL_ERR is not set
# CONFIG_BT_SETTINGS_LOG_LEVEL_WRN is not set
# CONFIG_BT_SETTINGS_LOG_LEVEL_INF is not set
# CONFIG_BT_SETTINGS_LOG_LEVEL_DBG is not set
# CONFIG_BT_SETTINGS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_HCI_CORE_LOG_LEVEL_INHERIT=y
CONFIG_BT_HCI_CORE_LOG_LEVEL=3
# CONFIG_BT_HCI_CORE_LOG_LEVEL_OFF is not set
# CONFIG_BT_HCI_CORE_LOG_LEVEL_ERR is not set
# CONFIG_BT_HCI_CORE_LOG_LEVEL_WRN is not set
# CONFIG_BT_HCI_CORE_LOG_LEVEL_INF is not set
# CONFIG_BT_HCI_CORE_LOG_LEVEL_DBG is not set
# CONFIG_BT_HCI_CORE_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CONN_LOG_LEVEL_INHERIT=y
CONFIG_BT_CONN_LOG_LEVEL=3
# CONFIG_BT_CONN_LOG_LEVEL_OFF is not set
# CONFIG_BT_CONN_LOG_LEVEL_ERR is not set
# CONFIG_BT_CONN_LOG_LEVEL_WRN is not set
# CONFIG_BT_CONN_LOG_LEVEL_INF is not set
# CONFIG_BT_CONN_LOG_LEVEL_DBG is not set
# CONFIG_BT_CONN_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_ISO_LOG_LEVEL_INHERIT=y
CONFIG_BT_ISO_LOG_LEVEL=3
# CONFIG_BT_ISO_LOG_LEVEL_OFF is not set
# CONFIG_BT_ISO_LOG_LEVEL_ERR is not set
# CONFIG_BT_ISO_LOG_LEVEL_WRN is not set
# CONFIG_BT_ISO_LOG_LEVEL_INF is not set
# CONFIG_BT_ISO_LOG_LEVEL_DBG is not set
# CONFIG_BT_ISO_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_KEYS_LOG_LEVEL_INHERIT=y
CONFIG_BT_KEYS_LOG_LEVEL=3
# CONFIG_BT_KEYS_LOG_LEVEL_OFF is not set
# CONFIG_BT_KEYS_LOG_LEVEL_ERR is not set
# CONFIG_BT_KEYS_LOG_LEVEL_WRN is not set
# CONFIG_BT_KEYS_LOG_LEVEL_INF is not set
# CONFIG_BT_KEYS_LOG_LEVEL_DBG is not set
# CONFIG_BT_KEYS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_SMP_LOG_LEVEL_INHERIT=y
CONFIG_BT_SMP_LOG_LEVEL=3
# CONFIG_BT_SMP_LOG_LEVEL_OFF is not set
# CONFIG_BT_SMP_LOG_LEVEL_ERR is not set
# CONFIG_BT_SMP_LOG_LEVEL_WRN is not set
# CONFIG_BT_SMP_LOG_LEVEL_INF is not set
# CONFIG_BT_SMP_LOG_LEVEL_DBG is not set
# CONFIG_BT_SMP_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_SERVICE_LOG_LEVEL_INHERIT=y
CONFIG_BT_SERVICE_LOG_LEVEL=3
# CONFIG_BT_SERVICE_LOG_LEVEL_OFF is not set
# CONFIG_BT_SERVICE_LOG_LEVEL_ERR is not set
# CONFIG_BT_SERVICE_LOG_LEVEL_WRN is not set
# CONFIG_BT_SERVICE_LOG_LEVEL_INF is not set
# CONFIG_BT_SERVICE_LOG_LEVEL_DBG is not set
# CONFIG_BT_SERVICE_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_INHERIT=y
CONFIG_BT_CTLR_ISOAL_LOG_LEVEL=3
# CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_OFF is not set
# CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_ERR is not set
# CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_WRN is not set
# CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_INF is not set
# CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_DBG is not set
# CONFIG_BT_CTLR_ISOAL_LOG_LEVEL_DEFAULT is not set
# end of Others

#
# BR/EDR
#
CONFIG_BT_RFCOMM_LOG_LEVEL_INHERIT=y
CONFIG_BT_RFCOMM_LOG_LEVEL=3
# CONFIG_BT_RFCOMM_LOG_LEVEL_OFF is not set
# CONFIG_BT_RFCOMM_LOG_LEVEL_ERR is not set
# CONFIG_BT_RFCOMM_LOG_LEVEL_WRN is not set
# CONFIG_BT_RFCOMM_LOG_LEVEL_INF is not set
# CONFIG_BT_RFCOMM_LOG_LEVEL_DBG is not set
# CONFIG_BT_RFCOMM_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_HFP_HF_LOG_LEVEL_INHERIT=y
CONFIG_BT_HFP_HF_LOG_LEVEL=3
# CONFIG_BT_HFP_HF_LOG_LEVEL_OFF is not set
# CONFIG_BT_HFP_HF_LOG_LEVEL_ERR is not set
# CONFIG_BT_HFP_HF_LOG_LEVEL_WRN is not set
# CONFIG_BT_HFP_HF_LOG_LEVEL_INF is not set
# CONFIG_BT_HFP_HF_LOG_LEVEL_DBG is not set
# CONFIG_BT_HFP_HF_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_HFP_AG_LOG_LEVEL_INHERIT=y
CONFIG_BT_HFP_AG_LOG_LEVEL=3
# CONFIG_BT_HFP_AG_LOG_LEVEL_OFF is not set
# CONFIG_BT_HFP_AG_LOG_LEVEL_ERR is not set
# CONFIG_BT_HFP_AG_LOG_LEVEL_WRN is not set
# CONFIG_BT_HFP_AG_LOG_LEVEL_INF is not set
# CONFIG_BT_HFP_AG_LOG_LEVEL_DBG is not set
# CONFIG_BT_HFP_AG_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_AVDTP_LOG_LEVEL_INHERIT=y
CONFIG_BT_AVDTP_LOG_LEVEL=3
# CONFIG_BT_AVDTP_LOG_LEVEL_OFF is not set
# CONFIG_BT_AVDTP_LOG_LEVEL_ERR is not set
# CONFIG_BT_AVDTP_LOG_LEVEL_WRN is not set
# CONFIG_BT_AVDTP_LOG_LEVEL_INF is not set
# CONFIG_BT_AVDTP_LOG_LEVEL_DBG is not set
# CONFIG_BT_AVDTP_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_A2DP_LOG_LEVEL_INHERIT=y
CONFIG_BT_A2DP_LOG_LEVEL=3
# CONFIG_BT_A2DP_LOG_LEVEL_OFF is not set
# CONFIG_BT_A2DP_LOG_LEVEL_ERR is not set
# CONFIG_BT_A2DP_LOG_LEVEL_WRN is not set
# CONFIG_BT_A2DP_LOG_LEVEL_INF is not set
# CONFIG_BT_A2DP_LOG_LEVEL_DBG is not set
# CONFIG_BT_A2DP_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_SDP_LOG_LEVEL_INHERIT=y
CONFIG_BT_SDP_LOG_LEVEL=3
# CONFIG_BT_SDP_LOG_LEVEL_OFF is not set
# CONFIG_BT_SDP_LOG_LEVEL_ERR is not set
# CONFIG_BT_SDP_LOG_LEVEL_WRN is not set
# CONFIG_BT_SDP_LOG_LEVEL_INF is not set
# CONFIG_BT_SDP_LOG_LEVEL_DBG is not set
# CONFIG_BT_SDP_LOG_LEVEL_DEFAULT is not set
# end of BR/EDR

#
# Mesh
#
CONFIG_BT_MESH_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_LOG_LEVEL=3
# CONFIG_BT_MESH_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_NET_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_NET_LOG_LEVEL=3
# CONFIG_BT_MESH_NET_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_NET_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_NET_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_NET_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_NET_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_NET_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_RPL_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_RPL_LOG_LEVEL=3
# CONFIG_BT_MESH_RPL_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_RPL_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_RPL_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_RPL_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_RPL_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_RPL_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_TRANS_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_TRANS_LOG_LEVEL=3
# CONFIG_BT_MESH_TRANS_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_TRANS_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_TRANS_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_TRANS_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_TRANS_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_TRANS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_BEACON_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_BEACON_LOG_LEVEL=3
# CONFIG_BT_MESH_BEACON_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_BEACON_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_BEACON_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_BEACON_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_BEACON_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_BEACON_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_CRYPTO_LOG_LEVEL=3
# CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_CRYPTO_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_KEYS_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_KEYS_LOG_LEVEL=3
# CONFIG_BT_MESH_KEYS_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_KEYS_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_KEYS_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_KEYS_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_KEYS_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_KEYS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_PROV_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_PROV_LOG_LEVEL=3
# CONFIG_BT_MESH_PROV_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_PROV_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_PROV_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_PROV_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_PROV_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_PROV_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL=3
# CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_PROVISIONER_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL=3
# CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_ACCESS_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_ACCESS_LOG_LEVEL=3
# CONFIG_BT_MESH_ACCESS_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_ACCESS_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_ACCESS_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_ACCESS_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_ACCESS_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_ACCESS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_MODEL_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_MODEL_LOG_LEVEL=3
# CONFIG_BT_MESH_MODEL_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_MODEL_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_MODEL_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_MODEL_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_MODEL_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_MODEL_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_DFU_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_DFU_LOG_LEVEL=3
# CONFIG_BT_MESH_DFU_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_DFU_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_DFU_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_DFU_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_DFU_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_DFU_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_ADV_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_ADV_LOG_LEVEL=3
# CONFIG_BT_MESH_ADV_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_ADV_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_ADV_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_ADV_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_ADV_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_ADV_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL=3
# CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_LOW_POWER_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_FRIEND_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_FRIEND_LOG_LEVEL=3
# CONFIG_BT_MESH_FRIEND_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_FRIEND_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_FRIEND_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_FRIEND_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_FRIEND_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_FRIEND_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_PROXY_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_PROXY_LOG_LEVEL=3
# CONFIG_BT_MESH_PROXY_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_PROXY_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_PROXY_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_PROXY_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_PROXY_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_PROXY_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_SETTINGS_LOG_LEVEL=3
# CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_SETTINGS_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_CDB_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_CDB_LOG_LEVEL=3
# CONFIG_BT_MESH_CDB_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_CDB_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_CDB_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_CDB_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_CDB_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_CDB_LOG_LEVEL_DEFAULT is not set
CONFIG_BT_MESH_CFG_LOG_LEVEL_INHERIT=y
CONFIG_BT_MESH_CFG_LOG_LEVEL=3
# CONFIG_BT_MESH_CFG_LOG_LEVEL_OFF is not set
# CONFIG_BT_MESH_CFG_LOG_LEVEL_ERR is not set
# CONFIG_BT_MESH_CFG_LOG_LEVEL_WRN is not set
# CONFIG_BT_MESH_CFG_LOG_LEVEL_INF is not set
# CONFIG_BT_MESH_CFG_LOG_LEVEL_DBG is not set
# CONFIG_BT_MESH_CFG_LOG_LEVEL_DEFAULT is not set
# end of Mesh

#
# Services
#
# CONFIG_BT_BAS_LOG_LEVEL_OFF is not set
# CONFIG_BT_BAS_LOG_LEVEL_ERR is not set
# CONFIG_BT_BAS_LOG_LEVEL_WRN is not set
# CONFIG_BT_BAS_LOG_LEVEL_INF is not set
# CONFIG_BT_BAS_LOG_LEVEL_DBG is not set
CONFIG_BT_BAS_LOG_LEVEL_DEFAULT=y
CONFIG_BT_BAS_LOG_LEVEL=3
# CONFIG_BT_HRS_LOG_LEVEL_OFF is not set
# CONFIG_BT_HRS_LOG_LEVEL_ERR is not set
# CONFIG_BT_HRS_LOG_LEVEL_WRN is not set
# CONFIG_BT_HRS_LOG_LEVEL_INF is not set
# CONFIG_BT_HRS_LOG_LEVEL_DBG is not set
CONFIG_BT_HRS_LOG_LEVEL_DEFAULT=y
CONFIG_BT_HRS_LOG_LEVEL=3
# CONFIG_BT_TPS_LOG_LEVEL_OFF is not set
# CONFIG_BT_TPS_LOG_LEVEL_ERR is not set
# CONFIG_BT_TPS_LOG_LEVEL_WRN is not set
# CONFIG_BT_TPS_LOG_LEVEL_INF is not set
# CONFIG_BT_TPS_LOG_LEVEL_DBG is not set
CONFIG_BT_TPS_LOG_LEVEL_DEFAULT=y
CONFIG_BT_TPS_LOG_LEVEL=3
CONFIG_BT_IAS_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_IAS_CLIENT_LOG_LEVEL=3
# CONFIG_BT_IAS_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_IAS_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_IAS_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_IAS_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_IAS_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_IAS_CLIENT_LOG_LEVEL_DEFAULT is not set
# CONFIG_BT_IAS_LOG_LEVEL_OFF is not set
# CONFIG_BT_IAS_LOG_LEVEL_ERR is not set
# CONFIG_BT_IAS_LOG_LEVEL_WRN is not set
# CONFIG_BT_IAS_LOG_LEVEL_INF is not set
# CONFIG_BT_IAS_LOG_LEVEL_DBG is not set
CONFIG_BT_IAS_LOG_LEVEL_DEFAULT=y
CONFIG_BT_IAS_LOG_LEVEL=3
CONFIG_BT_OTS_CLIENT_LOG_LEVEL_INHERIT=y
CONFIG_BT_OTS_CLIENT_LOG_LEVEL=3
# CONFIG_BT_OTS_CLIENT_LOG_LEVEL_OFF is not set
# CONFIG_BT_OTS_CLIENT_LOG_LEVEL_ERR is not set
# CONFIG_BT_OTS_CLIENT_LOG_LEVEL_WRN is not set
# CONFIG_BT_OTS_CLIENT_LOG_LEVEL_INF is not set
# CONFIG_BT_OTS_CLIENT_LOG_LEVEL_DBG is not set
# CONFIG_BT_OTS_CLIENT_LOG_LEVEL_DEFAULT is not set
# CONFIG_BT_OTS_LOG_LEVEL_OFF is not set
# CONFIG_BT_OTS_LOG_LEVEL_ERR is not set
# CONFIG_BT_OTS_LOG_LEVEL_WRN is not set
# CONFIG_BT_OTS_LOG_LEVEL_INF is not set
# CONFIG_BT_OTS_LOG_LEVEL_DBG is not set
CONFIG_BT_OTS_LOG_LEVEL_DEFAULT=y
CONFIG_BT_OTS_LOG_LEVEL=3
# end of Services
# end of Bluetooth logging

#
# Controller Area Network (CAN) bus subsystem
#
# end of Controller Area Network (CAN) bus subsystem

# CONFIG_CONSOLE_SUBSYS is not set

#
# System Monitoring Options
#
# CONFIG_THREAD_ANALYZER is not set
# end of System Monitoring Options

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_STACK_USAGE is not set
# CONFIG_STACK_SENTINEL is not set
CONFIG_PRINTK=y
CONFIG_EARLY_CONSOLE=y
# CONFIG_ASSERT is not set
# CONFIG_FORCE_NO_ASSERT is not set
CONFIG_ASSERT_VERBOSE=y
# CONFIG_ASSERT_NO_FILE_INFO is not set
# CONFIG_ASSERT_NO_COND_INFO is not set
# CONFIG_ASSERT_NO_MSG_INFO is not set
# CONFIG_ASSERT_TEST is not set
# CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_THREAD_INFO is not set
# CONFIG_DEBUG_COREDUMP is not set
# end of Debugging Options

# CONFIG_MIPI_STP_DECODER is not set
# CONFIG_DISK_ACCESS is not set
# CONFIG_DSP is not set
# CONFIG_EMUL is not set
# CONFIG_CHARACTER_FRAMEBUFFER is not set

#
# File Systems
#
# CONFIG_FILE_SYSTEM is not set
# end of File Systems

#
# Inter Processor Communication
#
# CONFIG_RPMSG_SERVICE is not set
CONFIG_IPC_SERVICE=y
CONFIG_IPC_SERVICE_REG_BACKEND_PRIORITY=46
CONFIG_IPC_SERVICE_BACKEND_RPMSG=y
CONFIG_IPC_SERVICE_BACKEND_RPMSG_WQ_STACK_SIZE=1024
CONFIG_IPC_SERVICE_BACKEND_RPMSG_NUM_ENDPOINTS_PER_INSTANCE=2
CONFIG_IPC_SERVICE_RPMSG=y
CONFIG_IPC_SERVICE_STATIC_VRINGS=y
CONFIG_IPC_SERVICE_STATIC_VRINGS_MEM_ALIGNMENT=4
# CONFIG_IPC_SERVICE_ICMSG is not set
# CONFIG_IPC_SERVICE_ICMSG_ME is not set
# CONFIG_IPC_SERVICE_LOG_LEVEL_OFF is not set
# CONFIG_IPC_SERVICE_LOG_LEVEL_ERR is not set
# CONFIG_IPC_SERVICE_LOG_LEVEL_WRN is not set
# CONFIG_IPC_SERVICE_LOG_LEVEL_INF is not set
# CONFIG_IPC_SERVICE_LOG_LEVEL_DBG is not set
CONFIG_IPC_SERVICE_LOG_LEVEL_DEFAULT=y
CONFIG_IPC_SERVICE_LOG_LEVEL=3
# end of Inter Processor Communication

# CONFIG_JWT is not set
# CONFIG_LLEXT is not set

#
# Linkable loadable Extension Development Kit (EDK)
#
CONFIG_LLEXT_EDK_NAME="llext-edk"
# CONFIG_LLEXT_EDK_USERSPACE_ONLY is not set
# end of Linkable loadable Extension Development Kit (EDK)

#
# Logging
#
CONFIG_LOG_CORE_INIT_PRIORITY=0
CONFIG_LOG_MODE_DEFERRED=y
# CONFIG_LOG_MODE_IMMEDIATE is not set
# CONFIG_LOG_MODE_MINIMAL is not set
# CONFIG_LOG_FRONTEND is not set
# CONFIG_LOG_FRONTEND_OPT_API is not set
# CONFIG_LOG_CUSTOM_HEADER is not set
# CONFIG_LOG_MULTIDOMAIN is not set

#
# Logging levels filtering
#
# CONFIG_LOG_RUNTIME_FILTERING is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_OVERRIDE_LEVEL=0
CONFIG_LOG_MAX_LEVEL=4
# end of Logging levels filtering

#
# Processing
#
CONFIG_LOG_PRINTK=y
CONFIG_LOG_MODE_OVERFLOW=y
# CONFIG_LOG_BLOCK_IN_THREAD is not set
CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD=10
CONFIG_LOG_PROCESS_THREAD=y
CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0
CONFIG_LOG_PROCESS_THREAD_SLEEP_MS=1000
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=768
# CONFIG_LOG_PROCESS_THREAD_CUSTOM_PRIORITY is not set
CONFIG_LOG_TRACE_SHORT_TIMESTAMP=y
# CONFIG_LOG_TIMESTAMP_64BIT is not set
# CONFIG_LOG_SPEED is not set
# end of Processing

#
# Output Formatting
#

#
# Prepend non-hexdump log message with function name
#
# CONFIG_LOG_FUNC_NAME_PREFIX_ERR is not set
# CONFIG_LOG_FUNC_NAME_PREFIX_WRN is not set
# CONFIG_LOG_FUNC_NAME_PREFIX_INF is not set
CONFIG_LOG_FUNC_NAME_PREFIX_DBG=y
# end of Prepend non-hexdump log message with function name

# CONFIG_LOG_MIPI_SYST_ENABLE is not set
# CONFIG_LOG_THREAD_ID_PREFIX is not set
# CONFIG_LOG_CUSTOM_FORMAT_SUPPORT is not set
CONFIG_LOG_BACKEND_SHOW_COLOR=y
# CONFIG_LOG_INFO_COLOR_GREEN is not set
CONFIG_LOG_TAG_MAX_LEN=0
CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP=y
# CONFIG_LOG_OUTPUT_FORMAT_LINUX_TIMESTAMP is not set
# CONFIG_LOG_OUTPUT_FORMAT_CUSTOM_TIMESTAMP is not set
# end of Output Formatting

#
# Backends
#
# CONFIG_LOG_BACKEND_SWO is not set
CONFIG_LOG_BACKEND_UART=y
CONFIG_LOG_BACKEND_UART_BUFFER_SIZE=1
CONFIG_LOG_BACKEND_UART_AUTOSTART=y
CONFIG_LOG_BACKEND_UART_OUTPUT_TEXT=y
# CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY is not set
# CONFIG_LOG_BACKEND_UART_OUTPUT_CUSTOM is not set
CONFIG_LOG_BACKEND_UART_OUTPUT_DEFAULT=0
# CONFIG_LOG_BACKEND_IPC_SERVICE is not set
# end of Backends

#
# Misc
#
CONFIG_LOG_DOMAIN_ID=0
CONFIG_LOG_USE_VLA=y
CONFIG_LOG_SIMPLE_MSG_OPTIMIZE=y
# CONFIG_LOG_ALWAYS_RUNTIME is not set
# CONFIG_LOG_FMT_SECTION is not set
# CONFIG_LOG_FMT_STRING_VALIDATE is not set
# CONFIG_LOG_MEM_UTILIZATION is not set
CONFIG_LOG_FAILURE_REPORT_PERIOD=1000
# end of Misc

CONFIG_LOG_OUTPUT=y
# end of Logging

CONFIG_MEM_ATTR=y
# CONFIG_MEM_ATTR_HEAP is not set

#
# Device Management
#

#
# Host command handler subsystem
#
# CONFIG_EC_HOST_CMD is not set
# end of Host command handler subsystem

# CONFIG_OSDP is not set
# end of Device Management

# CONFIG_MODBUS is not set
# CONFIG_MODEM_MODULES is not set

#
# Networking
#
CONFIG_NET_BUF=y
# CONFIG_NET_BUF_LOG is not set
# CONFIG_NET_BUF_LOG_LEVEL_OFF is not set
# CONFIG_NET_BUF_LOG_LEVEL_ERR is not set
# CONFIG_NET_BUF_LOG_LEVEL_WRN is not set
# CONFIG_NET_BUF_LOG_LEVEL_INF is not set
# CONFIG_NET_BUF_LOG_LEVEL_DBG is not set
CONFIG_NET_BUF_LOG_LEVEL_DEFAULT=y
CONFIG_NET_BUF_LOG_LEVEL=3
# CONFIG_NET_BUF_POOL_USAGE is not set
CONFIG_NET_BUF_ALIGNMENT=0
# CONFIG_NETWORKING is not set
# end of Networking

#
# Power Management
#
# end of Power Management

#
# Portability
#
# end of Portability

#
# Random Number Generators
#
# CONFIG_TEST_RANDOM_GENERATOR is not set
CONFIG_TIMER_RANDOM_INITIAL_STATE=123456789
# end of Random Number Generators

# CONFIG_RTIO is not set

#
# SD
#
# CONFIG_MMC_STACK is not set
# CONFIG_SDMMC_STACK is not set
# CONFIG_SDIO_STACK is not set
# end of SD

# CONFIG_SETTINGS is not set
# CONFIG_SHELL is not set
# CONFIG_STATS is not set

#
# Storage
#
# CONFIG_STREAM_FLASH is not set
# end of Storage

# CONFIG_TASK_WDT is not set

#
# Testing
#
# CONFIG_ZTEST is not set
# CONFIG_ZTEST_MOCKING is not set
# CONFIG_ZTRESS is not set
# CONFIG_TEST is not set
CONFIG_COVERAGE_GCOV_HEAP_SIZE=16384
# CONFIG_FORCE_COVERAGE is not set
# CONFIG_TEST_USERSPACE is not set
# end of Testing

# CONFIG_TIMING_FUNCTIONS is not set
# CONFIG_TRACING is not set
# CONFIG_USB_DEVICE_STACK is not set
# CONFIG_USB_DEVICE_STACK_NEXT is not set
# CONFIG_USB_HOST_STACK is not set
# CONFIG_USBC_STACK is not set
# CONFIG_ZBUS is not set
# CONFIG_MODULES is not set
# end of Subsystems and OS Services

CONFIG_TOOLCHAIN_ZEPHYR_0_16=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_THREAD_LOCAL_STORAGE=y

#
# Build and Link Features
#

#
# Linker Options
#
# CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
CONFIG_LINKER_ORPHAN_SECTION_WARN=y
# CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
CONFIG_ROM_END_OFFSET=0
CONFIG_LD_LINKER_SCRIPT_SUPPORTED=y
CONFIG_LD_LINKER_TEMPLATE=y
# CONFIG_CMAKE_LINKER_GENERATOR is not set
# CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
CONFIG_LINKER_SORT_BY_ALIGNMENT=y

#
# Linker Sections
#
# CONFIG_LINKER_USE_BOOT_SECTION is not set
# CONFIG_LINKER_USE_PINNED_SECTION is not set
CONFIG_LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT=y
CONFIG_LINKER_LAST_SECTION_ID=y
CONFIG_LINKER_LAST_SECTION_ID_PATTERN=0xE015E015
CONFIG_LINKER_USE_RELAX=y
# end of Linker Sections

CONFIG_LINKER_ITERABLE_SUBALIGN=4
CONFIG_LINKER_DEVNULL_SUPPORT=y
# CONFIG_LINKER_DEVNULL_MEMORY is not set
# end of Linker Options

#
# Compiler Options
#
# CONFIG_STD_C90 is not set
CONFIG_STD_C99=y
# CONFIG_STD_C11 is not set
# CONFIG_STD_C17 is not set
# CONFIG_STD_C23 is not set
CONFIG_TOOLCHAIN_SUPPORTS_GNU_EXTENSIONS=y
# CONFIG_GNU_C_EXTENSIONS is not set
# CONFIG_CODING_GUIDELINE_CHECK is not set
# CONFIG_COMPILER_FREESTANDING is not set
CONFIG_SIZE_OPTIMIZATIONS=y
# CONFIG_SPEED_OPTIMIZATIONS is not set
# CONFIG_DEBUG_OPTIMIZATIONS is not set
# CONFIG_NO_OPTIMIZATIONS is not set
# CONFIG_COMPILER_WARNINGS_AS_ERRORS is not set
# CONFIG_COMPILER_SAVE_TEMPS is not set
CONFIG_COMPILER_TRACK_MACRO_EXPANSION=y
CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
# CONFIG_FORTIFY_SOURCE_NONE is not set
CONFIG_FORTIFY_SOURCE_COMPILE_TIME=y
# CONFIG_FORTIFY_SOURCE_RUN_TIME is not set
CONFIG_COMPILER_OPT=""
# CONFIG_MISRA_SANE is not set
# end of Compiler Options

# CONFIG_ASSERT_ON_ERRORS is not set
# CONFIG_NO_RUNTIME_CHECKS is not set
CONFIG_RUNTIME_ERROR_CHECKS=y

#
# Build Options
#
CONFIG_KERNEL_BIN_NAME="zephyr"
CONFIG_OUTPUT_STAT=y
# CONFIG_OUTPUT_SYMBOLS is not set
# CONFIG_OUTPUT_DISASSEMBLY is not set
CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
# CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
# CONFIG_BUILD_NO_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_EXE is not set
# CONFIG_BUILD_OUTPUT_S19 is not set
# CONFIG_BUILD_OUTPUT_UF2 is not set
# CONFIG_BUILD_OUTPUT_STRIPPED is not set
# CONFIG_BUILD_OUTPUT_COMPRESS_DEBUG_SECTIONS is not set
# CONFIG_BUILD_ALIGN_LMA is not set
# CONFIG_APPLICATION_DEFINED_SYSCALL is not set
# CONFIG_MAKEFILE_EXPORTS is not set
# CONFIG_BUILD_OUTPUT_META is not set
CONFIG_BUILD_OUTPUT_STRIP_PATHS=y
CONFIG_CHECK_INIT_PRIORITIES=y
# CONFIG_EMIT_ALL_SYSCALLS is not set
# end of Build Options

CONFIG_WARN_DEPRECATED=y
CONFIG_ENFORCE_ZEPHYR_STDINT=y
# end of Build and Link Features

#
# Boot Options
#
# CONFIG_IS_BOOTLOADER is not set
# CONFIG_BOOTLOADER_BOSSA is not set
# end of Boot Options

RE: simple gpio to control external FEM in NCS 2.7.0 & nrf5340

lincoln-lu — Wed, 26 Feb 2025 14:22:15 GMT

Here is the generated .config file for net core's hci_ipc child image, under C:\ncs\v2.7.0\zephyr\samples\bluetooth\hci_pwr_ctrl\build\hci_ipc\zephyr

# CONFIG_INPUT is not set
# CONFIG_WIFI is not set
# CONFIG_MIPI_DSI is not set
# CONFIG_MODEM is not set
# CONFIG_UART_INTERRUPT_DRIVEN is not set
# CONFIG_SPI is not set
CONFIG_BT_HCI_ACL_FLOW_CONTROL=y
CONFIG_BT_HCI_VS=y
CONFIG_FLASH_LOAD_SIZE=0
CONFIG_SRAM_SIZE=64
CONFIG_FLASH_LOAD_OFFSET=0
CONFIG_MBOX_NRFX_IPC=y
CONFIG_BT_CTLR=y
CONFIG_NUM_IRQS=30
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=32768
CONFIG_FLASH_SIZE=256
CONFIG_FLASH_BASE_ADDRESS=0x1000000
CONFIG_MP_MAX_NUM_CPUS=1
CONFIG_PLATFORM_SPECIFIC_INIT=y
CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768
CONFIG_ROM_START_OFFSET=0
CONFIG_PINCTRL=y
CONFIG_BUILD_OUTPUT_BIN=y
CONFIG_XIP=y
CONFIG_MAIN_STACK_SIZE=512
CONFIG_IDLE_STACK_SIZE=256
CONFIG_HAS_FLASH_LOAD_OFFSET=y
# CONFIG_SRAM_VECTOR_TABLE is not set
CONFIG_CPU_HAS_ARM_MPU=y
# CONFIG_COUNTER is not set
# CONFIG_SHARED_INTERRUPTS is not set
# CONFIG_PM_DEVICE is not set
CONFIG_TICKLESS_KERNEL=y
CONFIG_CLOCK_CONTROL_INIT_PRIORITY=30
# CONFIG_USE_DT_CODE_PARTITION is not set
CONFIG_HW_STACK_PROTECTION=y
# CONFIG_CODE_DATA_RELOCATION_SRAM is not set
CONFIG_SERIAL_INIT_PRIORITY=50
CONFIG_GPIO=y
CONFIG_SERIAL=y
# CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS is not set
CONFIG_TINYCRYPT=y
# CONFIG_MBEDTLS is not set
# CONFIG_MEMC is not set
CONFIG_KERNEL_ENTRY="__start"
# CONFIG_MULTI_LEVEL_INTERRUPTS is not set
# CONFIG_DYNAMIC_INTERRUPTS is not set
# CONFIG_CACHE is not set
# CONFIG_LOG is not set
# CONFIG_CODE_DATA_RELOCATION is not set
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
CONFIG_DCACHE_LINE_SIZE=32
CONFIG_GEN_IRQ_VECTOR_TABLE=y
CONFIG_SOC="nrf5340"
# CONFIG_RESET is not set
CONFIG_ARCH_SW_ISR_TABLE_ALIGN=4
CONFIG_NRF_RTC_TIMER=y
# CONFIG_IPC_SERVICE_BACKEND_RPMSG_SHMEM_RESET is not set
CONFIG_LOG_DOMAIN_NAME="net"
CONFIG_BUILD_OUTPUT_HEX=y
CONFIG_CLOCK_CONTROL=y
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT=y
CONFIG_SOC_HAS_TIMING_FUNCTIONS=y
# CONFIG_UART_USE_RUNTIME_CONFIGURE is not set
# CONFIG_SYSCON is not set
CONFIG_ENTROPY_INIT_PRIORITY=50
CONFIG_GEN_ISR_TABLES=y
CONFIG_GEN_IRQ_START_VECTOR=0
CONFIG_GEN_SW_ISR_TABLE=y
CONFIG_SRAM_OFFSET=0
# CONFIG_REBOOT is not set
# CONFIG_POWER_DOMAIN is not set
CONFIG_CONSOLE=y
CONFIG_SOC_SERIES="nrf53"
CONFIG_ARCH_IRQ_VECTOR_TABLE_ALIGN=4
CONFIG_ISR_STACK_SIZE=2048
# CONFIG_SCHED_CPU_MASK is not set
# CONFIG_WATCHDOG is not set
CONFIG_ICACHE_LINE_SIZE=32
CONFIG_PRIVILEGED_STACK_SIZE=1024

#
# Devicetree Info
#
CONFIG_DT_HAS_ARDUINO_HEADER_R3_ENABLED=y
CONFIG_DT_HAS_ARM_ARMV8M_MPU_ENABLED=y
CONFIG_DT_HAS_ARM_CORTEX_M33_ENABLED=y
CONFIG_DT_HAS_ARM_V8M_NVIC_ENABLED=y
CONFIG_DT_HAS_FIXED_PARTITIONS_ENABLED=y
CONFIG_DT_HAS_GPIO_KEYS_ENABLED=y
CONFIG_DT_HAS_GPIO_LEDS_ENABLED=y
CONFIG_DT_HAS_MMIO_SRAM_ENABLED=y
CONFIG_DT_HAS_NORDIC_MBOX_NRF_IPC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_ACL_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CCM_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_CLOCK_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_DPPIC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_ECB_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_EGU_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_FICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPIOTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_GPREGRET_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_IEEE802154_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_IPC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_PINCTRL_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_POWER_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RADIO_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_RNG_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_SWI_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_TEMP_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UARTE_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_UICR_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_VMC_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF_WDT_ENABLED=y
CONFIG_DT_HAS_NORDIC_NRF53_FLASH_CONTROLLER_ENABLED=y
CONFIG_DT_HAS_SOC_NV_FLASH_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_BT_HCI_ENTROPY_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_IPC_OPENAMP_STATIC_VRINGS_ENABLED=y
CONFIG_DT_HAS_ZEPHYR_MEMORY_REGION_ENABLED=y
# end of Devicetree Info

#
# Modules
#

#
# Available modules.
#

#
# nrf (C:/ncs/v2.7.0/nrf)
#
CONFIG_MBOX=y
CONFIG_NUM_METAIRQ_PRIORITIES=0
# CONFIG_INIT_STACKS is not set
CONFIG_MPSL_WORK_STACK_SIZE=1024
# CONFIG_SHURE_QSPI_DMA_ENCRYPTION is not set
# CONFIG_SHURE_QSPI_XIP_ENCRYPTION is not set

#
# Nordic nRF Connect
#
CONFIG_BOOT_BANNER_STRING="Booting nRF Connect SDK"
CONFIG_WARN_EXPERIMENTAL=y
CONFIG_BT_BUF_CMD_TX_COUNT=10
CONFIG_INIT_ARCH_HW_AT_BOOT=y
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=2048
# CONFIG_GETOPT is not set
# CONFIG_NCS_SAMPLES_DEFAULTS is not set
# CONFIG_NCS_SAMPLE_EMPTY_APP_CORE_CHILD_IMAGE is not set
# CONFIG_NCS_SAMPLE_DTM_REMOTE_HCI_CHILD_IMAGE is not set

#
# Image build variants
#
# CONFIG_NCS_MCUBOOT_IN_BUILD is not set
# end of Image build variants

# CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU_SPEEDUP is not set
CONFIG_BT_BUF_ACL_TX_SIZE=27
CONFIG_BT_BUF_ACL_RX_SIZE=27
CONFIG_BT_CTLR_DATA_LENGTH_MAX=27

#
# Subsystems
#

#
# Bootloader
#
# CONFIG_BUILD_S1_VARIANT is not set
# CONFIG_SECURE_BOOT is not set
CONFIG_PM_PARTITION_SIZE_PROVISION=0x280
# CONFIG_B0_MIN_PARTITION_SIZE is not set
CONFIG_PM_PARTITION_SIZE_B0_IMAGE=0x7800
# CONFIG_IS_SECURE_BOOTLOADER is not set

#
# Secure Boot firmware validation
#
CONFIG_SB_VALIDATION_INFO_MAGIC=0x86518483
CONFIG_SB_VALIDATION_POINTER_MAGIC=0x6919b47e
CONFIG_SB_VALIDATION_INFO_CRYPTO_ID=1
CONFIG_SB_VALIDATION_INFO_VERSION=2
CONFIG_SB_VALIDATION_METADATA_OFFSET=0
CONFIG_SB_VALIDATE_FW_HASH=y
# end of Secure Boot firmware validation

# CONFIG_SECURE_BOOT_STORAGE is not set
# end of Bootloader

#
# Bluetooth Low Energy
#
CONFIG_BT_COMPANY_ID_NORDIC=0x0059
CONFIG_BT_COMPANY_ID=0x0059
CONFIG_BT_MAX_CONN=16
CONFIG_BT_LL_SOFTDEVICE_HEADERS_INCLUDE=y
CONFIG_BT_LL_SOFTDEVICE=y
CONFIG_BT_CTLR_DF_SUPPORT=y

#
# SoftDevice Controller
#
CONFIG_BT_LL_SOFTDEVICE_BUILD_TYPE_LIB=y
CONFIG_BT_HCI_TX_STACK_SIZE=1536
CONFIG_BT_RX_STACK_SIZE=768
# CONFIG_BT_CTLR_SDC_QOS_CHANNEL_SURVEY is not set
# CONFIG_BT_CTLR_SDC_ALLOW_PARALLEL_SCANNING_AND_INITIATING is not set
CONFIG_BT_CTLR_SDC_PERIPHERAL_COUNT=1
# CONFIG_BT_CTLR_SDC_MAX_CONN_EVENT_LEN_DEFAULT_OVERRIDE is not set
CONFIG_BT_CTLR_SDC_MAX_CONN_EVENT_LEN_DEFAULT=7500
CONFIG_BT_CTLR_SDC_CONN_EVENT_EXTEND_DEFAULT=y
CONFIG_BT_CTLR_SDC_CENTRAL_ACL_EVENT_SPACING_DEFAULT=7500
# CONFIG_BT_CTLR_SDC_PERIODIC_ADV_EVENT_LEN_DEFAULT_OVERRIDE is not set
CONFIG_BT_CTLR_SDC_PERIODIC_ADV_EVENT_LEN_DEFAULT=7500
CONFIG_BT_CTLR_SDC_TX_PACKET_COUNT=3
CONFIG_BT_CTLR_SDC_RX_PACKET_COUNT=2
CONFIG_BT_CTLR_SDC_SCAN_BUFFER_COUNT=3
CONFIG_BT_CTLR_SDC_PERIODIC_SYNC_BUFFER_COUNT=3
CONFIG_BT_CTLR_SDC_RX_PRIO=6
# CONFIG_BT_CTLR_DF is not set
CONFIG_BT_LL_SOFTDEVICE_MULTIROLE=y
CONFIG_BT_CTLR_FAL_SIZE=8
CONFIG_BT_CTLR_ECDH_LIB_OBERON=y
# CONFIG_BT_CTLR_ECDH_LIB_TINYCRYPT is not set
CONFIG_BT_CTLR_ECDH_STACK_SIZE=900
CONFIG_BT_CTLR_ECDH_IN_MPSL_WORK=y
# CONFIG_BT_CTLR_SDC_EVENT_TRIGGER is not set
CONFIG_BT_CTLR_SDC_BIG_RESERVED_TIME_US=1600
CONFIG_BT_CTLR_SDC_CIG_RESERVED_TIME_US=1300
CONFIG_BT_CTLR_SDC_CIS_SUBEVENT_LENGTH_US=0
# end of SoftDevice Controller

#
# BLE Libraries
#
# CONFIG_BT_GATT_POOL is not set
# CONFIG_BT_GATT_DM is not set
# CONFIG_BT_ADV_PROV is not set
# CONFIG_BT_SCAN is not set
# CONFIG_BT_CONN_CTX is not set

#
# Bluetooth Services
#
# CONFIG_BT_AMS_CLIENT is not set
# CONFIG_BT_ANCS_CLIENT is not set
# CONFIG_BT_BAS_CLIENT is not set
# CONFIG_BT_BMS is not set
# CONFIG_BT_CTS_CLIENT is not set
# CONFIG_BT_DFU_SMP is not set
# CONFIG_BT_GATTP is not set
# CONFIG_BT_HIDS is not set
# CONFIG_BT_HOGP is not set
# CONFIG_BT_LBS is not set
# CONFIG_BT_NSMS is not set
# CONFIG_BT_NUS is not set
# CONFIG_BT_NUS_CLIENT is not set
# CONFIG_BT_RSCS is not set
# CONFIG_BT_THROUGHPUT is not set
# CONFIG_BT_LATENCY is not set
# CONFIG_BT_LATENCY_CLIENT is not set
# CONFIG_BT_HRS_CLIENT is not set
# CONFIG_BT_DDFS is not set
# CONFIG_BT_MDS is not set
# CONFIG_BT_CGMS is not set
# CONFIG_BT_FAST_PAIR is not set
CONFIG_SYSTEM_WORKQUEUE_PRIORITY=-1
# end of Bluetooth Services

#
# BLE over nRF RPC
#
CONFIG_HEAP_MEM_POOL_SIZE=8192
# CONFIG_BT_RPC_STACK is not set
CONFIG_BT_CENTRAL=y
CONFIG_BT_PERIPHERAL=y
CONFIG_BT_OBSERVER=y
CONFIG_BT_BROADCASTER=y
CONFIG_BT_CONN=y
CONFIG_BT_REMOTE_VERSION=y
CONFIG_BT_PHY_UPDATE=y
CONFIG_BT_DATA_LEN_UPDATE=y
# CONFIG_BT_EXT_ADV is not set
CONFIG_BT_BUF_ACL_TX_COUNT=7
CONFIG_BT_BUF_ACL_RX_COUNT=6
CONFIG_BT_BUF_EVT_RX_SIZE=68
CONFIG_BT_BUF_EVT_RX_COUNT=10
CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=43
CONFIG_BT_BUF_CMD_TX_SIZE=65
CONFIG_BT_HAS_HCI_VS=y
# CONFIG_BT_HCI_VS_FATAL_ERROR is not set
# CONFIG_BT_HCI_MESH_EXT is not set
# CONFIG_BT_WAIT_NOP is not set
CONFIG_BT_RPA=y
CONFIG_BT_ASSERT=y
CONFIG_BT_ASSERT_VERBOSE=y
# CONFIG_BT_ASSERT_PANIC is not set
CONFIG_BT_DEBUG_NONE=y
# CONFIG_BT_DEBUG_LOG is not set
# CONFIG_BT_DEBUG_MONITOR_UART is not set
# CONFIG_BT_LONG_WQ is not set
# CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT is not set
CONFIG_BT_HCI_TX_PRIO=7
# CONFIG_BT_RECV_WORKQ_SYS is not set
CONFIG_BT_RECV_WORKQ_BT=y
CONFIG_BT_RX_PRIO=8
CONFIG_BT_DRIVER_RX_HIGH_PRIO=6
# CONFIG_BT_ECC is not set
# CONFIG_BT_HOST_CCM is not set
# CONFIG_BT_LOG_SNIFFER_INFO is not set
# CONFIG_BT_TESTING is not set
# CONFIG_BT_HCI_VS_EVT_USER is not set
# end of BLE over nRF RPC
# end of Bluetooth Low Energy

#
# DFU
#
# CONFIG_DFU_MULTI_IMAGE is not set
# CONFIG_DFU_TARGET is not set
# end of DFU

# CONFIG_ESB is not set

#
# Peripheral CPU DFU (PCD)
#
# CONFIG_PCD is not set
# CONFIG_PCD_APP is not set
CONFIG_PCD_VERSION_PAGE_BUF_SIZE=2046
# CONFIG_PCD_NET is not set
# end of Peripheral CPU DFU (PCD)

#
# Networking
#

#
# Application protocols
#

#
# nRF Cloud
#

#
# Client ID (nRF Cloud Device ID)
#
CONFIG_NRF_CLOUD_CLIENT_ID_SRC_COMPILE_TIME=y
CONFIG_NRF_CLOUD_CLIENT_ID="my-client-id"
# end of Client ID (nRF Cloud Device ID)

# CONFIG_NRF_CLOUD_MQTT is not set
# CONFIG_NRF_CLOUD_FOTA is not set
CONFIG_FOTA_USE_NRF_CLOUD_SETTINGS_AREA=y
CONFIG_FOTA_DL_TIMEOUT_MIN=15
# CONFIG_NRF_CLOUD_FOTA_FULL_MODEM_UPDATE is not set
# CONFIG_NRF_CLOUD_REST is not set
# CONFIG_NRF_CLOUD_LOCATION_PARSE_ANCHORS is not set
# CONFIG_NRF_CLOUD_ALERT is not set
CONFIG_NRF_CLOUD_LOG_OUTPUT_LEVEL=1
# CONFIG_NRF_CLOUD_LOG_INCLUDE_LEVEL_0 is not set
CONFIG_NRF_CLOUD_LOG_BUF_SIZE=256
# CONFIG_NRF_CLOUD_COAP is not set

#
# Send shadow info sections on initial connect (MQTT/CoAP)
#
# end of Send shadow info sections on initial connect (MQTT/CoAP)

# CONFIG_NRF_CLOUD_GATEWAY is not set
# end of nRF Cloud

# CONFIG_REST_CLIENT is not set
# CONFIG_DOWNLOAD_CLIENT is not set
# CONFIG_AWS_IOT is not set
# CONFIG_AWS_JOBS is not set
# CONFIG_AZURE_IOT_HUB is not set

#
# Self-Registration (Zi ZHu Ce)
#
# end of Self-Registration (Zi ZHu Ce)

# CONFIG_ICAL_PARSER is not set
# CONFIG_FTP_CLIENT is not set
# CONFIG_LWM2M_CLIENT_UTILS is not set
# CONFIG_WIFI_CREDENTIALS is not set
# CONFIG_WIFI_CREDENTIALS_STATIC is not set
# CONFIG_MQTT_HELPER is not set
# CONFIG_NRF_MCUMGR_SMP_CLIENT is not set
# end of Application protocols
# end of Networking

#
# NFC
#
# CONFIG_NFC_NDEF is not set
# CONFIG_NFC_NDEF_PARSER is not set
# CONFIG_NFC_NDEF_PAYLOAD_TYPE_COMMON is not set
# CONFIG_NFC_T2T_PARSER is not set
# CONFIG_NFC_T4T_NDEF_FILE is not set
# CONFIG_NFC_T4T_ISODEP is not set
# CONFIG_NFC_T4T_APDU is not set
# CONFIG_NFC_T4T_CC_FILE is not set
# CONFIG_NFC_T4T_HL_PROCEDURE is not set
# CONFIG_NFC_PLATFORM is not set
# CONFIG_NFC_TNEP_TAG is not set
# CONFIG_NFC_TNEP_POLLER is not set
# CONFIG_NFC_TNEP_CH is not set
# end of NFC

# CONFIG_APP_EVENT_MANAGER is not set
# CONFIG_NRF_PROFILER is not set
# CONFIG_FW_INFO is not set

#
# Debug
#
# CONFIG_CPU_LOAD is not set
# CONFIG_PPI_TRACE is not set
# end of Debug

# CONFIG_SHELL_BT_NUS is not set
# CONFIG_SHELL_IPC is not set

#
# Multiprotocol service layer (MPSL)
#
# CONFIG_MPSL_FEM_ONLY is not set
CONFIG_MPSL_FEM_API_AVAILABLE=y
# CONFIG_MPSL_FEM_DEVICE_CONFIG_254 is not set
CONFIG_MPSL_THREAD_COOP_PRIO=6
CONFIG_MPSL_TIMESLOT_SESSION_COUNT=0
# CONFIG_MPSL_ASSERT_HANDLER is not set
# CONFIG_MPSL_TRIGGER_IPC_TASK_ON_RTC_START is not set
CONFIG_MPSL_LOW_PRIO_IRQN=26
# CONFIG_MPSL_PIN_DEBUG is not set
# end of Multiprotocol service layer (MPSL)

#
# Partition Manager
#
CONFIG_PARTITION_MANAGER_ENABLED=y
CONFIG_FLASH_MAP_CUSTOM=y
CONFIG_SRAM_BASE_ADDRESS=0x21000000

#
# Zephyr subsystem configurations
#
# end of Zephyr subsystem configurations

#
# NCS subsystem configurations
#
# CONFIG_PM_SINGLE_IMAGE is not set
CONFIG_PM_EXTERNAL_FLASH_BASE=0
CONFIG_PM_EXTERNAL_FLASH_PATH=""
CONFIG_PM_EXTERNAL_FLASH_SIZE_BITS=0
# CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK is not set
CONFIG_PM_SRAM_BASE=0x21000000
CONFIG_PM_SRAM_SIZE=0x10000
# end of Partition Manager

#
# nRF RPC (Remote Procedure Call) library
#
# end of nRF RPC (Remote Procedure Call) library

#
# Full Modem Firmware Update Management(FMFU)
#
# end of Full Modem Firmware Update Management(FMFU)

#
# SUIT-based Firmware Update Management
#
CONFIG_MGMT_SUITFU_TRIGGER_UPDATE_RESET_DELAY_MS=100
CONFIG_MGMT_SUITFU_AUTO_REGISTER_HANDLERS=y
CONFIG_MGMT_SUITFU_GRP_IMG=y
CONFIG_MGMT_SUITFU_IMAGE_NUMBER=0
# CONFIG_MGMT_SUITFU_GRP_SUIT is not set
# end of SUIT-based Firmware Update Management

# CONFIG_CAF is not set

#
# Nordic IEEE 802.15.4
#
# end of Nordic IEEE 802.15.4

# CONFIG_DM_MODULE is not set

#
# nRF Security
#
# CONFIG_NORDIC_SECURITY_BACKEND is not set
# CONFIG_NRF_SECURITY is not set
# CONFIG_PSA_WANT_GENERATE_RANDOM is not set
# CONFIG_PSA_WANT_ALG_CTR_DRBG is not set
# CONFIG_PSA_WANT_ALG_HMAC_DRBG is not set
# CONFIG_PSA_WANT_KEY_TYPE_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_RAW_DATA is not set
# CONFIG_PSA_WANT_KEY_TYPE_HMAC is not set
# CONFIG_PSA_WANT_KEY_TYPE_PASSWORD is not set
# CONFIG_PSA_WANT_KEY_TYPE_PASSWORD_HASH is not set
# CONFIG_PSA_WANT_KEY_TYPE_PEPPER is not set
# CONFIG_PSA_WANT_KEY_TYPE_AES is not set
# CONFIG_PSA_WANT_KEY_TYPE_ARIA is not set
# CONFIG_PSA_WANT_KEY_TYPE_DES is not set
# CONFIG_PSA_WANT_KEY_TYPE_CAMELLIA is not set
# CONFIG_PSA_WANT_KEY_TYPE_SM4 is not set
# CONFIG_PSA_WANT_KEY_TYPE_ARC4 is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE is not set
# CONFIG_PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE is not set
# CONFIG_PSA_WANT_KEY_TYPE_DH_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_DH_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR is not set
# CONFIG_PSA_WANT_KEY_TYPE_SPAKE2P_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_IMPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_EXPORT is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_DERIVE is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_PUBLIC_KEY is not set
# CONFIG_PSA_WANT_KEY_TYPE_SRP_KEY_PAIR is not set
# CONFIG_PSA_WANT_ALG_CCM is not set
# CONFIG_PSA_WANT_ALG_GCM is not set
# CONFIG_PSA_WANT_ALG_CHACHA20_POLY1305 is not set
# CONFIG_PSA_WANT_ALG_CBC_MAC is not set
# CONFIG_PSA_WANT_ALG_CMAC is not set
# CONFIG_PSA_WANT_ALG_HMAC is not set
# CONFIG_PSA_WANT_ALG_SHA_1 is not set
# CONFIG_PSA_WANT_ALG_SHA_224 is not set
# CONFIG_PSA_WANT_ALG_SHA_384 is not set
# CONFIG_PSA_WANT_ALG_SHA_512 is not set
# CONFIG_PSA_WANT_ALG_SHA_512_224 is not set
# CONFIG_PSA_WANT_ALG_SHA_512_256 is not set
# CONFIG_PSA_WANT_ALG_SHA3_224 is not set
# CONFIG_PSA_WANT_ALG_SHA3_256 is not set
# CONFIG_PSA_WANT_ALG_SHA3_384 is not set
# CONFIG_PSA_WANT_ALG_SHA3_512 is not set
# CONFIG_PSA_WANT_ALG_SM3 is not set
# CONFIG_PSA_WANT_ALG_SHAKE256_512 is not set
# CONFIG_PSA_WANT_ALG_RIPEMD160 is not set
# CONFIG_PSA_WANT_ALG_MD2 is not set
# CONFIG_PSA_WANT_ALG_MD4 is not set
# CONFIG_PSA_WANT_ALG_MD5 is not set
# CONFIG_PSA_WANT_ALG_ECB_NO_PADDING is not set
# CONFIG_PSA_WANT_ALG_CBC_NO_PADDING is not set
# CONFIG_PSA_WANT_ALG_CBC_PKCS7 is not set
# CONFIG_PSA_WANT_ALG_CFB is not set
# CONFIG_PSA_WANT_ALG_CTR is not set
# CONFIG_PSA_WANT_ALG_OFB is not set
# CONFIG_PSA_WANT_ALG_XTS is not set
# CONFIG_PSA_WANT_ALG_CCM_STAR_NO_TAG is not set
# CONFIG_PSA_WANT_ALG_STREAM_CIPHER is not set
# CONFIG_PSA_WANT_ALG_ECDH is not set
# CONFIG_PSA_WANT_ALG_FFDH is not set
# CONFIG_PSA_WANT_ALG_HKDF_EXTRACT is not set
# CONFIG_PSA_WANT_ALG_HKDF_EXPAND is not set
# CONFIG_PSA_WANT_ALG_ECDSA is not set
# CONFIG_PSA_WANT_ALG_ECDSA_ANY is not set
# CONFIG_PSA_WANT_ALG_DETERMINISTIC_ECDSA is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_160 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_192 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_224 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_256 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_320 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_384 is not set
# CONFIG_PSA_WANT_ECC_BRAINPOOL_P_R1_512 is not set
# CONFIG_PSA_WANT_ECC_MONTGOMERY_255 is not set
# CONFIG_PSA_WANT_ECC_MONTGOMERY_448 is not set
# CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_255 is not set
# CONFIG_PSA_WANT_ECC_TWISTED_EDWARDS_448 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_192 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_224 is not set
# CONFIG_PSA_WANT_ECC_SECP_K1_256 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_192 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_224 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_256 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_384 is not set
# CONFIG_PSA_WANT_ECC_SECP_R1_521 is not set
# CONFIG_PSA_WANT_ECC_SECP_R2_160 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_163 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_233 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_239 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_283 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_409 is not set
# CONFIG_PSA_WANT_ECC_SECT_K1_571 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_163 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_233 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_283 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_409 is not set
# CONFIG_PSA_WANT_ECC_SECT_R1_571 is not set
# CONFIG_PSA_WANT_ECC_SECT_R2_163 is not set
# CONFIG_PSA_WANT_ECC_FRP_V1_256 is not set
# CONFIG_PSA_WANT_ALG_RSA_OAEP is not set
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_CRYPT is not set
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN is not set
# CONFIG_PSA_WANT_ALG_RSA_PKCS1V15_SIGN_RAW is not set
# CONFIG_PSA_WANT_ALG_RSA_PSS is not set
# CONFIG_PSA_WANT_ALG_RSA_PSS_ANY_SALT is not set
# CONFIG_PSA_WANT_ALG_JPAKE is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_HMAC is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_CMAC is not set
# CONFIG_PSA_WANT_ALG_SPAKE2P_MATTER is not set
# CONFIG_PSA_WANT_ALG_SRP_6 is not set
# CONFIG_PSA_WANT_ALG_SRP_PASSWORD_HASH is not set
# CONFIG_PSA_WANT_ALG_PURE_EDDSA is not set
# CONFIG_PSA_WANT_ALG_ED25519PH is not set
# CONFIG_PSA_WANT_ALG_ED448PH is not set
# end of nRF Security

# CONFIG_NET_CORE_MONITOR is not set

#
# Audio Module
#
# CONFIG_AUDIO_MODULE_TEST is not set
CONFIG_AUDIO_MODULE_NAME_SIZE=20
# end of Audio Module

# CONFIG_UART_ASYNC_ADAPTER is not set
# CONFIG_TRUSTED_STORAGE is not set

#
# SUIT provisioning
#
# CONFIG_SUIT_MPI_GENERATE is not set
# end of SUIT provisioning

# CONFIG_SUIT is not set
# CONFIG_DULT is not set
# end of Subsystems

# CONFIG_WPA_SUPP is not set
CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=-1
CONFIG_POSIX_MAX_FDS=4
# CONFIG_WFA_QT_CONTROL_APP is not set
CONFIG_WFA_QT_THREAD_STACK_SIZE=4096
CONFIG_WFA_QT_REBOOT_TIMEOUT_MS=1000
CONFIG_WFA_QT_DEFAULT_INTERFACE="nordic_wlan0"
CONFIG_WPAS_READY_TIMEOUT_MS=10000

#
# Libraries
#

#
# Binary libraries
#
# end of Binary libraries

# CONFIG_AT_MONITOR is not set
# CONFIG_LTE_LINK_CONTROL is not set
CONFIG_NRF_ACL_FLASH_REGION_SIZE=0x800
CONFIG_FPROTECT_BLOCK_SIZE=0x800
# CONFIG_FPROTECT is not set
# CONFIG_AT_CMD_CUSTOM is not set
# CONFIG_DK_LIBRARY is not set
# CONFIG_AT_CMD_PARSER is not set
# CONFIG_MODEM_INFO is not set
CONFIG_MULTITHREADING_LOCK=y
# CONFIG_RESET_ON_FATAL_ERROR is not set
# CONFIG_SMS is not set
# CONFIG_DATE_TIME is not set
# CONFIG_HW_ID_LIBRARY is not set
# CONFIG_WAVE_GEN_LIB is not set
CONFIG_HW_UNIQUE_KEY_PARTITION_SIZE=0x800
# CONFIG_MODEM_JWT is not set
# CONFIG_LOCATION is not set
# CONFIG_QOS is not set
# CONFIG_SFLOAT is not set
# CONFIG_CONTIN_ARRAY is not set
# CONFIG_PCM_MIX is not set
# CONFIG_TONE is not set
# CONFIG_PSCM is not set
# CONFIG_DATA_FIFO is not set
# CONFIG_FEM_AL_LIB is not set
# CONFIG_SAMPLE_RATE_CONVERTER is not set
CONFIG_NCS_BOOT_BANNER=y
CONFIG_NCS_NCS_BOOT_BANNER_STRING="nRF Connect SDK"
CONFIG_NCS_ZEPHYR_BOOT_BANNER_STRING="Zephyr OS"
# end of Libraries

#
# Device Drivers
#
# CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE is not set
# CONFIG_ETH_RTT is not set
# CONFIG_SENSOR is not set
# CONFIG_NRF_SW_LPUART is not set
CONFIG_NRFX_GPIOTE_NUM_OF_EVT_HANDLERS=1
# CONFIG_IPC_UART is not set
# CONFIG_FLASH_RPC is not set
CONFIG_CLOCK_CONTROL_MPSL=y
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_MPSL_TIMESLOT_SESSION_COUNT=0
# end of Device Drivers

#
# External libraries
#
# end of External libraries

#
# Test
#
CONFIG_ZTEST_MULTICORE_DEFAULT_SETTINGS=y
# CONFIG_UNITY is not set

#
# Mocks
#
# CONFIG_MOCK_NRF_MODEM_AT is not set
# end of Mocks
# end of Test
# end of Nordic nRF Connect

CONFIG_ZEPHYR_NRF_MODULE=y
# end of nrf (C:/ncs/v2.7.0/nrf)

#
# mbedtls (C:/ncs/v2.7.0/modules/crypto/mbedtls)
#
CONFIG_ZEPHYR_MBEDTLS_MODULE=y

#
# PSA RNG support
#
# end of PSA RNG support

#
# PSA key type support
#
# end of PSA key type support

#
# PSA AEAD support
#
# end of PSA AEAD support

#
# PSA MAC support
#
# end of PSA MAC support

#
# PSA Hash support
#
# end of PSA Hash support

#
# PSA Cipher support
#
# end of PSA Cipher support

#
# PSA Key agreement support
#
# end of PSA Key agreement support

#
# PSA Key derivation support
#
# end of PSA Key derivation support

#
# PSA Asymmetric support
#

#
# Elliptic Curve type support
#
# end of Elliptic Curve type support
# end of PSA Asymmetric support
# end of mbedtls (C:/ncs/v2.7.0/modules/crypto/mbedtls)

#
# oberon-psa-crypto (C:/ncs/v2.7.0/modules/crypto/oberon-psa-crypto)
#
CONFIG_ZEPHYR_OBERON_PSA_CRYPTO_MODULE=y
# end of oberon-psa-crypto (C:/ncs/v2.7.0/modules/crypto/oberon-psa-crypto)

#
# trusted-firmware-m (C:/ncs/v2.7.0/modules/tee/tf-m/trusted-firmware-m)
#
# CONFIG_BOOTLOADER_MCUBOOT is not set
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE=y
# end of trusted-firmware-m (C:/ncs/v2.7.0/modules/tee/tf-m/trusted-firmware-m)

CONFIG_ZEPHYR_PSA_ARCH_TESTS_MODULE=y
CONFIG_ZEPHYR_SOC_HWMV1_MODULE=y

#
# cjson (C:/ncs/v2.7.0/modules/lib/cjson)
#
# CONFIG_CJSON_LIB is not set
CONFIG_ZEPHYR_CJSON_MODULE=y
# end of cjson (C:/ncs/v2.7.0/modules/lib/cjson)

#
# azure-sdk-for-c (C:/ncs/v2.7.0/modules/lib/azure-sdk-for-c)
#
# CONFIG_AZURE_SDK is not set
CONFIG_ZEPHYR_AZURE_SDK_FOR_C_MODULE=y
# end of azure-sdk-for-c (C:/ncs/v2.7.0/modules/lib/azure-sdk-for-c)

#
# cirrus-logic (C:/ncs/v2.7.0/modules/hal/cirrus-logic)
#
# CONFIG_HW_CODEC_CIRRUS_LOGIC is not set
CONFIG_ZEPHYR_CIRRUS_LOGIC_MODULE=y
# end of cirrus-logic (C:/ncs/v2.7.0/modules/hal/cirrus-logic)

#
# openthread (C:/ncs/v2.7.0/modules/lib/openthread)
#
# CONFIG_OPENTHREAD is not set
CONFIG_ZEPHYR_OPENTHREAD_MODULE=y
# end of openthread (C:/ncs/v2.7.0/modules/lib/openthread)

#
# suit-generator (C:/ncs/v2.7.0/modules/lib/suit-generator)
#
CONFIG_SUIT_ENVELOPE_TEMPLATE=""
CONFIG_SUIT_ENVELOPE_TARGET=""
CONFIG_SUIT_ENVELOPE_OUTPUT_ARTIFACT="merged.hex"
CONFIG_SUIT_ENVELOPE_OUTPUT_MPI_MERGE=y
# CONFIG_SUIT_LOCAL_ENVELOPE_GENERATE is not set
CONFIG_ZEPHYR_SUIT_GENERATOR_MODULE=y
# end of suit-generator (C:/ncs/v2.7.0/modules/lib/suit-generator)

#
# suit-processor (C:/ncs/v2.7.0/modules/lib/suit-processor)
#
# CONFIG_SUIT_PROCESSOR is not set
CONFIG_SUIT_PLATFORM_DRY_RUN_SUPPORT=y
CONFIG_ZEPHYR_SUIT_PROCESSOR_MODULE=y
# end of suit-processor (C:/ncs/v2.7.0/modules/lib/suit-processor)

#
# memfault-firmware-sdk (C:/ncs/v2.7.0/modules/lib/memfault-firmware-sdk)
#
# CONFIG_MEMFAULT is not set
CONFIG_ZEPHYR_MEMFAULT_FIRMWARE_SDK_MODULE=y
# end of memfault-firmware-sdk (C:/ncs/v2.7.0/modules/lib/memfault-firmware-sdk)

#
# coremark (C:/ncs/v2.7.0/modules/benchmark/coremark)
#
# CONFIG_COREMARK is not set
CONFIG_ZEPHYR_COREMARK_MODULE=y
# end of coremark (C:/ncs/v2.7.0/modules/benchmark/coremark)

#
# canopennode (C:/ncs/v2.7.0/modules/lib/canopennode)
#
CONFIG_ZEPHYR_CANOPENNODE_MODULE=y
# end of canopennode (C:/ncs/v2.7.0/modules/lib/canopennode)

#
# chre (C:/ncs/v2.7.0/modules/lib/chre)
#
CONFIG_ZEPHYR_CHRE_MODULE=y
# CONFIG_CHRE is not set
# end of chre (C:/ncs/v2.7.0/modules/lib/chre)

#
# lz4 (C:/ncs/v2.7.0/modules/lib/lz4)
#
CONFIG_ZEPHYR_LZ4_MODULE=y
# CONFIG_LZ4 is not set
# end of lz4 (C:/ncs/v2.7.0/modules/lib/lz4)

#
# nanopb (C:/ncs/v2.7.0/modules/lib/nanopb)
#
CONFIG_ZEPHYR_NANOPB_MODULE=y
# CONFIG_NANOPB is not set
# end of nanopb (C:/ncs/v2.7.0/modules/lib/nanopb)

CONFIG_ZEPHYR_TF_M_TESTS_MODULE=y

#
# zscilib (C:/ncs/v2.7.0/modules/lib/zscilib)
#
# CONFIG_ZSL is not set
CONFIG_ZEPHYR_ZSCILIB_MODULE=y
# end of zscilib (C:/ncs/v2.7.0/modules/lib/zscilib)

#
# cmsis (C:/ncs/v2.7.0/modules/hal/cmsis)
#
CONFIG_ZEPHYR_CMSIS_MODULE=y
CONFIG_HAS_CMSIS_CORE=y
CONFIG_HAS_CMSIS_CORE_M=y
# CONFIG_CMSIS_M_CHECK_DEVICE_DEFINES is not set
# end of cmsis (C:/ncs/v2.7.0/modules/hal/cmsis)

#
# cmsis-dsp (C:/ncs/v2.7.0/modules/lib/cmsis-dsp)
#
CONFIG_ZEPHYR_CMSIS_DSP_MODULE=y
# CONFIG_CMSIS_DSP is not set
# end of cmsis-dsp (C:/ncs/v2.7.0/modules/lib/cmsis-dsp)

#
# cmsis-nn (C:/ncs/v2.7.0/modules/lib/cmsis-nn)
#
CONFIG_ZEPHYR_CMSIS_NN_MODULE=y
# CONFIG_CMSIS_NN is not set
# end of cmsis-nn (C:/ncs/v2.7.0/modules/lib/cmsis-nn)

#
# fatfs (C:/ncs/v2.7.0/modules/fs/fatfs)
#
CONFIG_ZEPHYR_FATFS_MODULE=y
# end of fatfs (C:/ncs/v2.7.0/modules/fs/fatfs)

#
# hal_nordic (C:/ncs/v2.7.0/modules/hal/nordic)
#
CONFIG_ZEPHYR_HAL_NORDIC_MODULE=y
CONFIG_HAS_NORDIC_DRIVERS=y

#
# Nordic drivers
#
# CONFIG_NRF_802154_SOURCE_HAL_NORDIC is not set
# CONFIG_NRF_802154_RADIO_DRIVER is not set
# CONFIG_NRF_802154_SER_RADIO is not set
# end of Nordic drivers

CONFIG_HAS_NRFX=y

#
# nrfx drivers
#
CONFIG_MPSL=y
# CONFIG_NRFX_CLOCK is not set
CONFIG_NRFX_DPPI=y
# CONFIG_NRFX_EGU0 is not set
CONFIG_NRFX_GPIOTE=y
CONFIG_NRFX_GPIOTE0=y
CONFIG_NRFX_IPC=y
# CONFIG_NRFX_NVMC is not set
# CONFIG_NRFX_POWER is not set
# CONFIG_NRFX_RNG is not set
# CONFIG_NRFX_RTC0 is not set
# CONFIG_NRFX_RTC1 is not set
# CONFIG_NRFX_SPIM0 is not set
# CONFIG_NRFX_SYSTICK is not set
# CONFIG_NRFX_TEMP is not set
# CONFIG_NRFX_TIMER0 is not set
# CONFIG_NRFX_TIMER1 is not set
# CONFIG_NRFX_TIMER2 is not set
# CONFIG_NRFX_TWIM0 is not set
# CONFIG_NRFX_UARTE0 is not set
# CONFIG_NRFX_WDT0 is not set

#
# Peripheral Resource Sharing module
#
# CONFIG_NRFX_PRS_BOX_0 is not set
# CONFIG_NRFX_PRS_BOX_1 is not set
# CONFIG_NRFX_PRS_BOX_2 is not set
# CONFIG_NRFX_PRS_BOX_3 is not set
# CONFIG_NRFX_PRS_BOX_4 is not set
# end of Peripheral Resource Sharing module
# end of nrfx drivers
# end of hal_nordic (C:/ncs/v2.7.0/modules/hal/nordic)

#
# hal_st (C:/ncs/v2.7.0/modules/hal/st)
#
CONFIG_ZEPHYR_HAL_ST_MODULE=y
# end of hal_st (C:/ncs/v2.7.0/modules/hal/st)

CONFIG_ZEPHYR_HAL_WURTHELEKTRONIK_MODULE=y
CONFIG_ZEPHYR_LIBMETAL_MODULE=y

#
# liblc3 (C:/ncs/v2.7.0/modules/lib/liblc3)
#
CONFIG_ZEPHYR_LIBLC3_MODULE=y
# end of liblc3 (C:/ncs/v2.7.0/modules/lib/liblc3)

#
# littlefs (C:/ncs/v2.7.0/modules/fs/littlefs)
#
CONFIG_ZEPHYR_LITTLEFS_MODULE=y
# end of littlefs (C:/ncs/v2.7.0/modules/fs/littlefs)

#
# loramac-node (C:/ncs/v2.7.0/modules/lib/loramac-node)
#
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE=y
# CONFIG_HAS_SEMTECH_RADIO_DRIVERS is not set
# end of loramac-node (C:/ncs/v2.7.0/modules/lib/loramac-node)

#
# lvgl (C:/ncs/v2.7.0/modules/lib/gui/lvgl)
#
CONFIG_ZEPHYR_LVGL_MODULE=y
# end of lvgl (C:/ncs/v2.7.0/modules/lib/gui/lvgl)

CONFIG_ZEPHYR_MIPI_SYS_T_MODULE=y
CONFIG_ZEPHYR_NRF_HW_MODELS_MODULE=y
CONFIG_ZEPHYR_OPEN_AMP_MODULE=y

#
# picolibc (C:/ncs/v2.7.0/modules/lib/picolibc)
#
# CONFIG_PICOLIBC_MODULE is not set
CONFIG_ZEPHYR_PICOLIBC_MODULE=y
# end of picolibc (C:/ncs/v2.7.0/modules/lib/picolibc)

#
# segger (C:/ncs/v2.7.0/modules/debug/segger)
#
CONFIG_ZEPHYR_SEGGER_MODULE=y
CONFIG_HAS_SEGGER_RTT=y
# CONFIG_USE_SEGGER_RTT is not set
# end of segger (C:/ncs/v2.7.0/modules/debug/segger)

CONFIG_ZEPHYR_TINYCRYPT_MODULE=y

#
# uoscore-uedhoc (C:/ncs/v2.7.0/modules/lib/uoscore-uedhoc)
#
CONFIG_ZEPHYR_UOSCORE_UEDHOC_MODULE=y
# end of uoscore-uedhoc (C:/ncs/v2.7.0/modules/lib/uoscore-uedhoc)

#
# zcbor (C:/ncs/v2.7.0/modules/lib/zcbor)
#
CONFIG_ZEPHYR_ZCBOR_MODULE=y
# CONFIG_ZCBOR is not set
# end of zcbor (C:/ncs/v2.7.0/modules/lib/zcbor)

#
# mcuboot (C:/ncs/v2.7.0/bootloader/mcuboot)
#

#
# MCUboot
#
CONFIG_BOOT_SIGNATURE_KEY_FILE=""
CONFIG_DT_FLASH_WRITE_BLOCK_SIZE=4
# end of MCUboot

CONFIG_ZEPHYR_MCUBOOT_MODULE=y
# end of mcuboot (C:/ncs/v2.7.0/bootloader/mcuboot)

#
# nrfxlib (C:/ncs/v2.7.0/nrfxlib)
#

#
# Nordic nrfxlib
#

#
# nrf_modem (Modem library)
#
# end of nrf_modem (Modem library)

CONFIG_NRF_MODEM_SHMEM_CTRL_SIZE=0x4e8
# CONFIG_NFC_T2T_NRFXLIB is not set
# CONFIG_NFC_T4T_NRFXLIB is not set
CONFIG_MPSL_BUILD_TYPE_LIB=y
CONFIG_MPSL_LIB_DIR="cortex-m33+nodsp"
CONFIG_MPSL_LIB_FLOAT_ABI_DIR="soft-float"

#
# Crypto libraries for nRF5x SOCs.
#
CONFIG_NRFXLIB_CRYPTO=y
CONFIG_NRF_OBERON=y
# CONFIG_NRF_CC310_BL is not set
# end of Crypto libraries for nRF5x SOCs.

# CONFIG_NRF_RPC is not set
CONFIG_NRF_802154_SOURCE_NRFXLIB=y
# CONFIG_GZLL is not set
# CONFIG_NRF_DM is not set
# CONFIG_NRF_FUEL_GAUGE is not set
# end of Nordic nrfxlib

CONFIG_ZEPHYR_NRFXLIB_MODULE=y
# end of nrfxlib (C:/ncs/v2.7.0/nrfxlib)

#
# connectedhomeip (C:/ncs/v2.7.0/modules/lib/matter)
#
# CONFIG_CHIP is not set
CONFIG_ZEPHYR_CONNECTEDHOMEIP_MODULE=y
# end of connectedhomeip (C:/ncs/v2.7.0/modules/lib/matter)

CONFIG_LIBMETAL=y
CONFIG_LIBMETAL_SRC_PATH="libmetal"
# CONFIG_LVGL is not set
# CONFIG_HAS_MEC_HAL is not set
# CONFIG_HAS_MPFS_HAL is not set
# CONFIG_HAS_MEC5_HAL is not set
CONFIG_OPENAMP=y
CONFIG_OPENAMP_SRC_PATH="open-amp"
CONFIG_OPENAMP_MASTER=y
CONFIG_OPENAMP_SLAVE=y
# CONFIG_MIPI_SYST_LIB is not set
# CONFIG_HAS_TELINK_DRIVERS is not set
# CONFIG_TINYCRYPT_CTR_PRNG is not set
# CONFIG_TINYCRYPT_SHA256 is not set
# CONFIG_TINYCRYPT_ECC_DH is not set
# CONFIG_TINYCRYPT_ECC_DSA is not set
CONFIG_TINYCRYPT_AES=y
# CONFIG_TINYCRYPT_AES_CBC is not set
# CONFIG_TINYCRYPT_AES_CTR is not set
# CONFIG_TINYCRYPT_AES_CCM is not set
# CONFIG_TINYCRYPT_AES_CMAC is not set
# CONFIG_MCUBOOT_BOOTUTIL_LIB is not set
# CONFIG_WIFI_NM_WPA_SUPPLICANT is not set

#
# Unavailable modules, please install those via the project manifest.
#

#
# hal_gigadevice module not available.
#

#
# Trusted-firmware-a module not available.
#

#
# THRIFT module not available.
#
# CONFIG_ACPI is not set
# end of Modules

CONFIG_BOARD="nrf5340dk"
CONFIG_BOARD_REVISION=""
CONFIG_BOARD_TARGET="nrf5340dk/nrf5340/cpunet"
# CONFIG_NET_DRIVERS is not set
CONFIG_BOARD_NRF5340DK=y
CONFIG_BOARD_NRF5340DK_NRF5340_CPUNET=y
CONFIG_BOARD_QUALIFIERS="nrf5340/cpunet"

#
# Board Options
#
CONFIG_DOMAIN_CPUAPP_BOARD="nrf5340dk/nrf5340/cpuapp"
# end of Board Options

#
# Hardware Configuration
#
CONFIG_SOC_FAMILY="nordic_nrf"
CONFIG_SOC_FAMILY_NORDIC_NRF=y
CONFIG_SOC_SERIES_NRF53X=y
CONFIG_SOC_NRF5340_CPUNET=y
CONFIG_SOC_NRF5340_CPUNET_QKAA=y
# CONFIG_MFD is not set
# CONFIG_BUILD_OUTPUT_INFO_HEADER is not set
CONFIG_HAS_HW_NRF_ACL=y
CONFIG_HAS_HW_NRF_CCM=y
CONFIG_HAS_HW_NRF_CCM_LFLEN_8BIT=y
CONFIG_HAS_HW_NRF_CCM_HEADERMASK=y
CONFIG_HAS_HW_NRF_CLOCK=y
CONFIG_HAS_HW_NRF_DPPIC=y
CONFIG_HAS_HW_NRF_ECB=y
CONFIG_HAS_HW_NRF_EGU0=y
CONFIG_HAS_HW_NRF_GPIO0=y
CONFIG_HAS_HW_NRF_GPIO1=y
CONFIG_HAS_HW_NRF_GPIOTE0=y
CONFIG_HAS_HW_NRF_IPC=y
CONFIG_HAS_HW_NRF_NVMC_PE=y
CONFIG_HAS_HW_NRF_POWER=y
CONFIG_HAS_HW_NRF_RADIO_BLE_2M=y
CONFIG_HAS_HW_NRF_RADIO_BLE_CODED=y
CONFIG_HAS_HW_NRF_RADIO_DFE=y
CONFIG_HAS_HW_NRF_RADIO_IEEE802154=y
CONFIG_HAS_HW_NRF_RNG=y
CONFIG_HAS_HW_NRF_SWI0=y
CONFIG_HAS_HW_NRF_SWI1=y
CONFIG_HAS_HW_NRF_SWI2=y
CONFIG_HAS_HW_NRF_SWI3=y
CONFIG_HAS_HW_NRF_TEMP=y
CONFIG_HAS_HW_NRF_UARTE0=y
CONFIG_HAS_HW_NRF_VMC=y
CONFIG_HAS_HW_NRF_WDT0=y
CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND_NEEDED=y
CONFIG_SOC_NRF53_ANOMALY_160_WORKAROUND=y
CONFIG_SOC_NRF53_ANOMALY_168_WORKAROUND=y
CONFIG_SOC_NRF53_RTC_PRETICK=y
CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_FROM_NET=10
CONFIG_SOC_NRF53_RTC_PRETICK_IPC_CH_TO_NET=11
CONFIG_NRF_ENABLE_CACHE=y
# CONFIG_NRF53_SYNC_RTC is not set
CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT=0
CONFIG_NRF_SOC_SECURE_SUPPORTED=y
CONFIG_NRF_APPROTECT_USE_UICR=y
# CONFIG_NRF_APPROTECT_LOCK is not set
# CONFIG_NRF_APPROTECT_USER_HANDLING is not set
# CONFIG_NRF_TRACE_PORT is not set
CONFIG_GPIO_INIT_PRIORITY=40
# end of Hardware Configuration

CONFIG_SOC_COMPATIBLE_NRF=y
CONFIG_SOC_COMPATIBLE_NRF53X=y
CONFIG_SOC_COMPATIBLE_NRF5340_CPUNET=y
CONFIG_ARCH="arm"
CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT=y
# CONFIG_EXTRA_EXCEPTION_INFO is not set
CONFIG_CPU_CORTEX=y
CONFIG_KOBJECT_TEXT_AREA=256
CONFIG_ARM_MPU=y
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE=32
# CONFIG_MPU_ALLOW_FLASH_WRITE is not set

#
# ARM Options
#
CONFIG_ARM_ON_ENTER_CPU_IDLE_HOOK=y
CONFIG_ARM_ON_ENTER_CPU_IDLE_PREPARE_HOOK=y
CONFIG_ARM_ON_EXIT_CPU_IDLE=y
CONFIG_CPU_CORTEX_M=y
# CONFIG_ARM_ZIMAGE_HEADER is not set
CONFIG_ISA_THUMB2=y
CONFIG_ASSEMBLER_ISA_THUMB2=y
CONFIG_COMPILER_ISA_THUMB2=y
CONFIG_STACK_ALIGN_DOUBLE_WORD=y
# CONFIG_RUNTIME_NMI is not set
CONFIG_FAULT_DUMP=2
CONFIG_BUILTIN_STACK_GUARD=y
CONFIG_ARM_STACK_PROTECTION=y
CONFIG_FP16=y
CONFIG_FP16_IEEE=y
# CONFIG_FP16_ALT is not set
CONFIG_CPU_CORTEX_M33=y
CONFIG_CPU_CORTEX_M_HAS_SYSTICK=y
CONFIG_CPU_CORTEX_M_HAS_DWT=y
CONFIG_CPU_CORTEX_M_HAS_BASEPRI=y
CONFIG_CPU_CORTEX_M_HAS_VTOR=y
CONFIG_CPU_CORTEX_M_HAS_SPLIM=y
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS=y
CONFIG_CPU_CORTEX_M_HAS_CMSE=y
CONFIG_ARMV7_M_ARMV8_M_MAINLINE=y
CONFIG_ARMV8_M_MAINLINE=y

#
# ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options
#
CONFIG_ZERO_LATENCY_IRQS=y
CONFIG_ZERO_LATENCY_LEVELS=1
# CONFIG_SW_VECTOR_RELAY is not set
# CONFIG_CORTEX_M_DWT is not set
# CONFIG_CORTEX_M_DEBUG_MONITOR_HOOK is not set
# CONFIG_TRAP_UNALIGNED_ACCESS is not set
# end of ARM Cortex-M0/M0+/M1/M3/M4/M7/M23/M33/M55 options

CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE=y
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT is not set
# CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU is not set
# CONFIG_MPU_STACK_GUARD is not set
# CONFIG_MPU_DISABLE_BACKGROUND_MAP is not set
# CONFIG_CUSTOM_SECTION_ALIGN is not set
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE=32
CONFIG_HAS_SWO=y
# end of ARM Options

CONFIG_ARM=y
CONFIG_ARCH_IS_SET=y

#
# General Architecture Options
#
# CONFIG_SEMIHOST is not set
CONFIG_LITTLE_ENDIAN=y
# CONFIG_USERSPACE is not set
CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT=100
CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES=16
CONFIG_GEN_PRIV_STACKS=y
# CONFIG_STACK_GROWS_UP is not set

#
# Interrupt Configuration
#
CONFIG_ISR_TABLES_LOCAL_DECLARATION_SUPPORTED=y
# CONFIG_ISR_TABLES_LOCAL_DECLARATION is not set
CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS=y
# CONFIG_IRQ_VECTOR_TABLE_JUMP_BY_CODE is not set
CONFIG_EXCEPTION_DEBUG=y
# CONFIG_SIMPLIFIED_EXCEPTION_CODES is not set
# end of Interrupt Configuration
# end of General Architecture Options

CONFIG_ARCH_HAS_TIMING_FUNCTIONS=y
CONFIG_ARCH_HAS_STACK_PROTECTION=y
CONFIG_ARCH_HAS_USERSPACE=y
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT=y
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT=y
CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION=y
CONFIG_ARCH_SUPPORTS_COREDUMP=y
CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT=y
CONFIG_ARCH_SUPPORTS_ROM_START=y
CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO=y
CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE=y
CONFIG_ARCH_HAS_SUSPEND_TO_RAM=y
CONFIG_ARCH_HAS_THREAD_ABORT=y
CONFIG_ARCH_HAS_CODE_DATA_RELOCATION=y
CONFIG_CPU_HAS_MPU=y
CONFIG_MPU=y
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS=y
CONFIG_MPU_GAP_FILLING=y
CONFIG_SRAM_REGION_PERMISSIONS=y

#
# DSP Options
#
# end of DSP Options

#
# Floating Point Options
#
# end of Floating Point Options

#
# Cache Options
#
# end of Cache Options

CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS=y
# CONFIG_ARCH_CPU_IDLE_CUSTOM is not set

#
# General Kernel Options
#
CONFIG_MULTITHREADING=y
CONFIG_NUM_COOP_PRIORITIES=16
CONFIG_NUM_PREEMPT_PRIORITIES=15
CONFIG_MAIN_THREAD_PRIORITY=0
CONFIG_COOP_ENABLED=y
CONFIG_PREEMPT_ENABLED=y
CONFIG_PRIORITY_CEILING=-127
# CONFIG_SCHED_DEADLINE is not set
CONFIG_THREAD_STACK_INFO=y
# CONFIG_THREAD_CUSTOM_DATA is not set
# CONFIG_DYNAMIC_THREAD is not set
CONFIG_SCHED_DUMB=y
# CONFIG_SCHED_SCALABLE is not set
# CONFIG_SCHED_MULTIQ is not set
# CONFIG_WAITQ_SCALABLE is not set
CONFIG_WAITQ_DUMB=y

#
# Misc Kernel related options
#
CONFIG_LIBC_ERRNO=y
CONFIG_ERRNO=y
CONFIG_CURRENT_THREAD_USE_TLS=y
# end of Misc Kernel related options

#
# Kernel Debugging and Metrics
#
CONFIG_BOOT_DELAY=0
# CONFIG_THREAD_MONITOR is not set
# CONFIG_THREAD_NAME is not set
# CONFIG_THREAD_RUNTIME_STATS is not set
# end of Kernel Debugging and Metrics

# CONFIG_OBJ_CORE is not set

#
# System Work Queue Options
#
# CONFIG_SYSTEM_WORKQUEUE_NO_YIELD is not set
# end of System Work Queue Options

#
# Barrier Operations
#
CONFIG_BARRIER_OPERATIONS_ARCH=y
# end of Barrier Operations

#
# Atomic Operations
#
CONFIG_ATOMIC_OPERATIONS_BUILTIN=y
# end of Atomic Operations

#
# Timer API Options
#
CONFIG_TIMESLICING=y
CONFIG_TIMESLICE_SIZE=0
CONFIG_TIMESLICE_PRIORITY=0
# CONFIG_TIMESLICE_PER_THREAD is not set
# end of Timer API Options

#
# Other Kernel Object Options
#
CONFIG_POLL=y
# CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION is not set
CONFIG_NUM_MBOX_ASYNC_MSGS=10
# CONFIG_EVENTS is not set
# CONFIG_PIPES is not set
CONFIG_KERNEL_MEM_POOL=y
# CONFIG_HEAP_MEM_POOL_IGNORE_MIN is not set
# end of Other Kernel Object Options

CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN=y
CONFIG_SWAP_NONATOMIC=y
CONFIG_SYS_CLOCK_EXISTS=y
CONFIG_TIMEOUT_64BIT=y
CONFIG_SYS_CLOCK_MAX_TIMEOUT_DAYS=365

#
# Security Options
#
# CONFIG_STACK_CANARIES is not set
CONFIG_STACK_POINTER_RANDOM=0
# end of Security Options

#
# Memory Domains
#
CONFIG_ARCH_MEM_DOMAIN_SUPPORTS_ISOLATED_STACKS=y
CONFIG_MEM_DOMAIN_ISOLATED_STACKS=y
# end of Memory Domains

#
# SMP Options
#
CONFIG_MP_NUM_CPUS=1
# CONFIG_TICKET_SPINLOCKS is not set
# end of SMP Options

CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE=y
CONFIG_THREAD_LOCAL_STORAGE=y
# end of General Kernel Options

#
# Device Options
#
# CONFIG_DEVICE_DEPS is not set
# CONFIG_DEVICE_MUTABLE is not set
# end of Device Options

#
# Initialization Priorities
#
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS=30
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
CONFIG_KERNEL_INIT_PRIORITY_DEVICE=50
CONFIG_APPLICATION_INIT_PRIORITY=90
# end of Initialization Priorities

#
# Virtual Memory Support
#
# end of Virtual Memory Support

#
# Device Drivers
#
# CONFIG_ADC is not set
# CONFIG_AUDIO is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_BBRAM is not set
# CONFIG_CAN is not set
# CONFIG_CHARGER is not set
CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT=y
CONFIG_CLOCK_CONTROL_NRF=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM is not set
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM=y
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM is not set
# CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM is not set
CONFIG_CLOCK_CONTROL_NRF_ACCURACY=50
# CONFIG_CLOCK_CONTROL_FIXED_RATE_CLOCK is not set
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN=128
CONFIG_CONSOLE_HAS_DRIVER=y
# CONFIG_CONSOLE_HANDLER is not set
CONFIG_CONSOLE_INIT_PRIORITY=60
CONFIG_UART_CONSOLE=y
# CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS is not set
# CONFIG_UART_CONSOLE_MCUMGR is not set
# CONFIG_RAM_CONSOLE is not set
# CONFIG_IPM_CONSOLE_SENDER is not set
# CONFIG_IPM_CONSOLE_RECEIVER is not set
# CONFIG_UART_MCUMGR is not set
# CONFIG_GSM_MUX is not set
# CONFIG_EFI_CONSOLE is not set
# CONFIG_COREDUMP_DEVICE is not set
# CONFIG_CRYPTO is not set
# CONFIG_DAC is not set
# CONFIG_DAI is not set
# CONFIG_DISK_DRIVERS is not set
# CONFIG_DISPLAY is not set
# CONFIG_DMA is not set
# CONFIG_EDAC is not set
# CONFIG_EEPROM is not set
CONFIG_ENTROPY_GENERATOR=y
CONFIG_ENTROPY_NRF5_RNG=y
# CONFIG_ENTROPY_NRF5_BIAS_CORRECTION is not set
CONFIG_ENTROPY_NRF5_THR_POOL_SIZE=8
CONFIG_ENTROPY_NRF5_THR_THRESHOLD=4
CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE=16
CONFIG_ENTROPY_NRF5_ISR_THRESHOLD=12
CONFIG_ENTROPY_HAS_DRIVER=y
# CONFIG_ESPI is not set
# CONFIG_FLASH is not set
# CONFIG_FPGA is not set
# CONFIG_FUEL_GAUGE is not set
# CONFIG_GNSS is not set
# CONFIG_GPIO_GET_DIRECTION is not set
# CONFIG_GPIO_GET_CONFIG is not set
# CONFIG_GPIO_HOGS is not set
# CONFIG_GPIO_ENABLE_DISABLE_INTERRUPT is not set
CONFIG_GPIO_NRFX=y
CONFIG_GPIO_NRFX_INTERRUPT=y
# CONFIG_HWINFO is not set
# CONFIG_HWSPINLOCK is not set
# CONFIG_I2C is not set
# CONFIG_I2S is not set
# CONFIG_I3C is not set

#
# Interrupt controller drivers
#
CONFIG_INTC_INIT_PRIORITY=40
# CONFIG_INTC_ESP32 is not set
# end of Interrupt controller drivers

# CONFIG_IPM is not set
# CONFIG_KSCAN is not set
# CONFIG_LED is not set
# CONFIG_LED_STRIP is not set
# CONFIG_LORA is not set
CONFIG_MBOX_INIT_PRIORITY=40
# CONFIG_MDIO is not set
# CONFIG_MIPI_DBI is not set

#
# Miscellaneous Drivers
#
# CONFIG_TIMEAWARE_GPIO is not set
# end of Miscellaneous Drivers

# CONFIG_MM_DRV is not set
# CONFIG_PCIE is not set
# CONFIG_PCIE_ENDPOINT is not set
# CONFIG_PECI is not set
CONFIG_PINCTRL_STORE_REG=y
# CONFIG_PINCTRL_DYNAMIC is not set
CONFIG_PINCTRL_NRF=y
# CONFIG_PM_CPU_OPS is not set
# CONFIG_PS2 is not set
# CONFIG_PTP_CLOCK is not set
# CONFIG_PWM is not set
# CONFIG_REGULATOR is not set
# CONFIG_RETAINED_MEM is not set
# CONFIG_RTC is not set
# CONFIG_SDHC is not set

#
# Capabilities
#
CONFIG_SERIAL_HAS_DRIVER=y
CONFIG_SERIAL_SUPPORT_ASYNC=y
CONFIG_SERIAL_SUPPORT_INTERRUPT=y
# CONFIG_UART_ASYNC_API is not set
# CONFIG_UART_LINE_CTRL is not set
# CONFIG_UART_DRV_CMD is not set
# CONFIG_UART_WIDE_DATA is not set
# CONFIG_UART_PIPE is not set
# CONFIG_UART_ASYNC_RX_HELPER is not set

#
# Serial Drivers
#
CONFIG_UART_NRFX=y
CONFIG_UART_NRFX_UARTE=y
CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=y
CONFIG_UART_0_ENHANCED_POLL_OUT=y
# CONFIG_UART_0_NRF_PARITY_BIT is not set
CONFIG_UART_0_NRF_TX_BUFFER_SIZE=32
# CONFIG_SMBUS is not set

#
# Timer drivers
#
# CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME is not set
# CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE is not set
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
CONFIG_TICKLESS_CAPABLE=y
CONFIG_SYSTEM_TIMER_HAS_DISABLE_SUPPORT=y
CONFIG_NRF_RTC_TIMER_LOCK_ZERO_LATENCY_IRQS=y
# CONFIG_NRF_RTC_TIMER_TRIGGER_OVERFLOW is not set
# CONFIG_SYSTEM_CLOCK_NO_WAIT is not set
# CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY is not set
CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY=y
# end of Timer drivers

# CONFIG_USB_BC12 is not set
# CONFIG_UDC_DRIVER is not set
# CONFIG_UHC_DRIVER is not set
# CONFIG_UVB is not set
# CONFIG_USB_DEVICE_DRIVER is not set
# CONFIG_USBC_TCPC_DRIVER is not set
# CONFIG_USBC_VBUS_DRIVER is not set
# CONFIG_USBC_PPC_DRIVER is not set
# CONFIG_VIDEO is not set
# CONFIG_VIRTUALIZATION is not set
# CONFIG_W1 is not set
# end of Device Drivers

# CONFIG_REQUIRES_FULL_LIBC is not set
# CONFIG_REQUIRES_FLOAT_PRINTF is not set
CONFIG_FULL_LIBC_SUPPORTED=y
CONFIG_MINIMAL_LIBC_SUPPORTED=y
CONFIG_NEWLIB_LIBC_SUPPORTED=y
CONFIG_PICOLIBC_SUPPORTED=y

#
# C Library
#
# CONFIG_MINIMAL_LIBC is not set
CONFIG_PICOLIBC=y
# CONFIG_NEWLIB_LIBC is not set
# CONFIG_EXTERNAL_LIBC is not set
CONFIG_HAS_NEWLIB_LIBC_NANO=y
CONFIG_COMMON_LIBC_ABORT=y
CONFIG_COMMON_LIBC_MALLOC=y
CONFIG_COMMON_LIBC_CALLOC=y
CONFIG_COMMON_LIBC_REALLOCARRAY=y
# CONFIG_PICOLIBC_USE_MODULE is not set
CONFIG_PICOLIBC_USE_TOOLCHAIN=y
CONFIG_PICOLIBC_HEAP_SIZE=-2
# CONFIG_PICOLIBC_IO_FLOAT is not set
CONFIG_PICOLIBC_IO_LONG_LONG=y
CONFIG_STDOUT_CONSOLE=y
CONFIG_NEED_LIBC_MEM_PARTITION=y
# end of C Library

#
# C++ Language Support
#
# CONFIG_CPP is not set

#
# Deprecated
#
# CONFIG_CPLUSPLUS is not set
# CONFIG_LIB_CPLUSPLUS is not set
# end of Deprecated
# end of C++ Language Support

# CONFIG_CRC is not set

#
# Additional libraries
#

#
# Hash Function Support
#
# CONFIG_SYS_HASH_FUNC32 is not set
# end of Hash Function Support

#
# Hashmap (Hash Table) Support
#
# CONFIG_SYS_HASH_MAP is not set
# end of Hashmap (Hash Table) Support

#
# Heap and Memory Allocation
#
# CONFIG_SYS_HEAP_VALIDATE is not set
# CONFIG_SYS_HEAP_STRESS is not set
# CONFIG_SYS_HEAP_INFO is not set
CONFIG_SYS_HEAP_ALLOC_LOOPS=3
# CONFIG_SYS_HEAP_RUNTIME_STATS is not set
# CONFIG_SYS_HEAP_LISTENER is not set
# CONFIG_SYS_HEAP_SMALL_ONLY is not set
# CONFIG_SYS_HEAP_BIG_ONLY is not set
CONFIG_SYS_HEAP_AUTO=y
# CONFIG_MULTI_HEAP is not set
# CONFIG_SHARED_MULTI_HEAP is not set
# end of Heap and Memory Allocation

#
# Memory Blocks
#
# CONFIG_SYS_MEM_BLOCKS is not set
# end of Memory Blocks

#
# OS Support Library
#
# CONFIG_FDTABLE is not set
# CONFIG_PRINTK_SYNC is not set
# CONFIG_MPSC_PBUF is not set
# CONFIG_SPSC_PBUF is not set
CONFIG_CBPRINTF_COMPLETE=y
# CONFIG_CBPRINTF_NANO is not set
CONFIG_CBPRINTF_FULL_INTEGRAL=y
# CONFIG_CBPRINTF_REDUCED_INTEGRAL is not set
# CONFIG_CBPRINTF_FP_SUPPORT is not set
# CONFIG_CBPRINTF_FP_A_SUPPORT is not set
# CONFIG_CBPRINTF_LIBC_SUBSTS is not set
# CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE is not set
# CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT is not set
CONFIG_CBPRINTF_CONVERT_CHECK_PTR=y
# end of OS Support Library

#
# POSIX API Support
#

#
# POSIX Options
#
# CONFIG_POSIX_API is not set
# CONFIG_POSIX_ASYNCHRONOUS_IO is not set
# CONFIG_POSIX_CLOCK is not set
# CONFIG_POSIX_CONFSTR is not set
# CONFIG_POSIX_ENV is not set
# CONFIG_EVENTFD is not set

#
# File descriptor table options
#
# end of File descriptor table options

# CONFIG_FNMATCH is not set
# CONFIG_GETENTROPY is not set
# CONFIG_POSIX_MQUEUE is not set

#
# sem_t support
#
CONFIG_SEM_VALUE_MAX=32767
CONFIG_SEM_NAMELEN_MAX=16
# end of sem_t support

#
# Signal support
#
CONFIG_POSIX_RTSIG_MAX=0
# CONFIG_POSIX_SIGNAL is not set
# end of Signal support

# CONFIG_POSIX_PUTMSG is not set

#
# Sysconf support
#
# CONFIG_POSIX_SYSCONF is not set
CONFIG_POSIX_PAGE_SIZE_BITS=6
# end of Sysconf support

# CONFIG_POSIX_SYSLOG is not set
# CONFIG_TIMER is not set
# CONFIG_POSIX_UNAME is not set
# end of POSIX Options

#
# POSIX Shell Utilities
#
# end of POSIX Shell Utilities
# end of POSIX API Support

# CONFIG_OPENAMP_RSC_TABLE is not set
# CONFIG_SMF is not set
CONFIG_LIBGCC_RTLIB=y

#
# Utility Library
#
# CONFIG_JSON_LIBRARY is not set
# CONFIG_RING_BUFFER is not set
CONFIG_NOTIFY=y
# CONFIG_BASE64 is not set
CONFIG_ONOFF=y
# CONFIG_WINSTREAM is not set
# CONFIG_UTF8 is not set
# end of Utility Library
# end of Additional libraries

#
# Subsystems and OS Services
#
# CONFIG_BINDESC is not set
CONFIG_BT=y
CONFIG_BT_HCI=y
# CONFIG_BT_CUSTOM is not set
CONFIG_BT_HCI_RAW=y
# CONFIG_BT_HCI_RAW_H4 is not set
# CONFIG_BT_HCI_RAW_CMD_EXT is not set
CONFIG_BT_CONN_TX=y
# CONFIG_BT_SCA_UPDATE is not set
# CONFIG_BT_TRANSMIT_POWER_CONTROL is not set
# CONFIG_BT_ISO_PERIPHERAL is not set
# CONFIG_BT_ISO_CENTRAL is not set
# CONFIG_BT_ISO_BROADCASTER is not set
# CONFIG_BT_ISO_SYNC_RECEIVER is not set

#
# Bluetooth buffer configuration
#
# end of Bluetooth buffer configuration

#
# Bluetooth Host
#

#
# Bluetooth Classic Options
#
# end of Bluetooth Classic Options
# end of Bluetooth Host

CONFIG_BT_CTLR_LE_ENC_SUPPORT=y
CONFIG_BT_CTLR_EXT_REJ_IND_SUPPORT=y
CONFIG_BT_CTLR_DATA_LEN_UPDATE_SUPPORT=y
CONFIG_BT_CTLR_PRIVACY_SUPPORT=y
CONFIG_BT_CTLR_EXT_SCAN_FP_SUPPORT=y
CONFIG_BT_CTLR_PHY_UPDATE_SUPPORT=y
CONFIG_BT_CTLR_PHY_2M_SUPPORT=y
CONFIG_BT_CTLR_PHY_CODED_SUPPORT=y
CONFIG_BT_CTLR_ADV_EXT_SUPPORT=y
CONFIG_BT_CTLR_ADV_PERIODIC_SUPPORT=y
CONFIG_BT_CTLR_ADV_PERIODIC_RSP_SUPPORT=y
CONFIG_BT_CTLR_SYNC_PERIODIC_SUPPORT=y
CONFIG_BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT=y
CONFIG_BT_CTLR_SYNC_TRANSFER_SENDER_SUPPORT=y
CONFIG_BT_CTLR_SYNC_TRANSFER_RECEIVER_SUPPORT=y
CONFIG_BT_CTLR_ADV_ISO_SUPPORT=y
CONFIG_BT_CTLR_SYNC_ISO_SUPPORT=y
CONFIG_BT_CTLR_CENTRAL_ISO_SUPPORT=y
CONFIG_BT_CTLR_PERIPHERAL_ISO_SUPPORT=y
CONFIG_BT_CTLR_CHAN_SEL_2_SUPPORT=y
CONFIG_BT_CTLR_SCA_UPDATE_SUPPORT=y
CONFIG_BT_CTLR_CONN_RSSI_SUPPORT=y
CONFIG_BT_CTLR_ECDH_SUPPORT=y
CONFIG_BT_CTLR_LE_POWER_CONTROL_SUPPORT=y
# CONFIG_BT_LL_SW_SPLIT is not set
CONFIG_BT_CTLR_HCI=y

#
# BLE Controller configuration
#
CONFIG_BT_CTLR_CRYPTO=y
CONFIG_BT_CTLR_HCI_VS_BUILD_INFO=""
# CONFIG_BT_CTLR_TX_PWR_PLUS_3 is not set
# CONFIG_BT_CTLR_TX_PWR_PLUS_2 is not set
# CONFIG_BT_CTLR_TX_PWR_PLUS_1 is not set
CONFIG_BT_CTLR_TX_PWR_0=y
# CONFIG_BT_CTLR_TX_PWR_MINUS_1 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_2 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_3 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_4 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_5 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_6 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_7 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_8 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_12 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_16 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_20 is not set
# CONFIG_BT_CTLR_TX_PWR_MINUS_40 is not set
CONFIG_BT_CTLR_TX_PWR_DBM=0
CONFIG_BT_CTLR_TX_PWR_ANTENNA=0
# CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL is not set

#
# BLE Controller features
#
CONFIG_BT_CTLR_LE_ENC=y
CONFIG_BT_CTLR_ECDH=y
CONFIG_BT_CTLR_EXT_REJ_IND=y
CONFIG_BT_CTLR_LE_PING=y
CONFIG_BT_CTLR_DATA_LENGTH=y
CONFIG_BT_CTLR_PHY=y
CONFIG_BT_CTLR_CONN_RSSI=y
# CONFIG_BT_CTLR_LE_POWER_CONTROL is not set
CONFIG_BT_CTLR_FILTER_ACCEPT_LIST=y
CONFIG_BT_CTLR_PRIVACY=y
CONFIG_BT_CTLR_RL_SIZE=8
CONFIG_BT_CTLR_EXT_SCAN_FP=y
CONFIG_BT_CTLR_PHY_2M=y
CONFIG_BT_CTLR_PHY_CODED=y
CONFIG_BT_CTLR_CHAN_SEL_2=y
# CONFIG_BT_CTLR_ADV_EXT is not set
# CONFIG_BT_CTLR_SET_HOST_FEATURE is not set
# CONFIG_BT_CTLR_CENTRAL_ISO is not set
# CONFIG_BT_CTLR_PERIPHERAL_ISO is not set
# CONFIG_BT_CTLR_HCI_CODEC_AND_DELAY_INFO is not set
CONFIG_BT_CTLR_DF_CTE_TX_SUPPORT=y
# CONFIG_BT_CTLR_ASSERT_HANDLER is not set
# CONFIG_BT_CTLR_VS_SCAN_REQ_RX is not set
# CONFIG_BT_SHELL is not set
# CONFIG_BT_EAD is not set

#
# Controller Area Network (CAN) bus subsystem
#
# end of Controller Area Network (CAN) bus subsystem

# CONFIG_CONSOLE_SUBSYS is not set

#
# System Monitoring Options
#
# CONFIG_THREAD_ANALYZER is not set
# end of System Monitoring Options

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_STACK_USAGE is not set
# CONFIG_STACK_SENTINEL is not set
CONFIG_PRINTK=y
CONFIG_EARLY_CONSOLE=y
# CONFIG_ASSERT is not set
# CONFIG_FORCE_NO_ASSERT is not set
CONFIG_ASSERT_VERBOSE=y
# CONFIG_ASSERT_NO_FILE_INFO is not set
# CONFIG_ASSERT_NO_COND_INFO is not set
# CONFIG_ASSERT_NO_MSG_INFO is not set
# CONFIG_ASSERT_TEST is not set
# CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_THREAD_INFO is not set
# CONFIG_DEBUG_COREDUMP is not set
# end of Debugging Options

# CONFIG_MIPI_STP_DECODER is not set
# CONFIG_DISK_ACCESS is not set
# CONFIG_DSP is not set
# CONFIG_EMUL is not set
# CONFIG_CHARACTER_FRAMEBUFFER is not set

#
# File Systems
#
# CONFIG_FILE_SYSTEM is not set
# end of File Systems

#
# Inter Processor Communication
#
# CONFIG_RPMSG_SERVICE is not set
CONFIG_IPC_SERVICE=y
CONFIG_IPC_SERVICE_REG_BACKEND_PRIORITY=46
CONFIG_IPC_SERVICE_BACKEND_RPMSG=y
CONFIG_IPC_SERVICE_BACKEND_RPMSG_WQ_STACK_SIZE=1024
CONFIG_IPC_SERVICE_BACKEND_RPMSG_NUM_ENDPOINTS_PER_INSTANCE=2
CONFIG_IPC_SERVICE_RPMSG=y
CONFIG_IPC_SERVICE_STATIC_VRINGS=y
CONFIG_IPC_SERVICE_STATIC_VRINGS_MEM_ALIGNMENT=4
# CONFIG_IPC_SERVICE_ICMSG is not set
# CONFIG_IPC_SERVICE_ICMSG_ME is not set
# end of Inter Processor Communication

# CONFIG_JWT is not set
# CONFIG_LLEXT is not set

#
# Linkable loadable Extension Development Kit (EDK)
#
CONFIG_LLEXT_EDK_NAME="llext-edk"
# CONFIG_LLEXT_EDK_USERSPACE_ONLY is not set
# end of Linkable loadable Extension Development Kit (EDK)

#
# Logging
#
# CONFIG_LOG_OUTPUT is not set
# end of Logging

CONFIG_MEM_ATTR=y
# CONFIG_MEM_ATTR_HEAP is not set

#
# Device Management
#

#
# Host command handler subsystem
#
# CONFIG_EC_HOST_CMD is not set
# end of Host command handler subsystem

# CONFIG_OSDP is not set
# end of Device Management

# CONFIG_MODBUS is not set
# CONFIG_MODEM_MODULES is not set

#
# Networking
#
CONFIG_NET_BUF=y
# CONFIG_NET_BUF_LOG is not set
# CONFIG_NET_BUF_POOL_USAGE is not set
CONFIG_NET_BUF_ALIGNMENT=0
# CONFIG_NETWORKING is not set
# end of Networking

#
# Power Management
#
# end of Power Management

#
# Portability
#
# end of Portability

#
# Random Number Generators
#
# CONFIG_TEST_RANDOM_GENERATOR is not set
CONFIG_TIMER_RANDOM_INITIAL_STATE=123456789
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR=y
# CONFIG_XOSHIRO_RANDOM_GENERATOR is not set
CONFIG_CSPRNG_ENABLED=y
CONFIG_HARDWARE_DEVICE_CS_GENERATOR=y
# CONFIG_CTR_DRBG_CSPRNG_GENERATOR is not set
# end of Random Number Generators

# CONFIG_RTIO is not set

#
# SD
#
# CONFIG_MMC_STACK is not set
# CONFIG_SDMMC_STACK is not set
# CONFIG_SDIO_STACK is not set
# end of SD

# CONFIG_SETTINGS is not set
# CONFIG_SHELL is not set
# CONFIG_STATS is not set

#
# Storage
#
# CONFIG_STREAM_FLASH is not set
# end of Storage

# CONFIG_TASK_WDT is not set

#
# Testing
#
# CONFIG_ZTEST is not set
# CONFIG_ZTEST_MOCKING is not set
# CONFIG_ZTRESS is not set
# CONFIG_TEST is not set
CONFIG_COVERAGE_GCOV_HEAP_SIZE=16384
# CONFIG_FORCE_COVERAGE is not set
# CONFIG_TEST_USERSPACE is not set
# end of Testing

# CONFIG_TIMING_FUNCTIONS is not set
# CONFIG_TRACING is not set
# CONFIG_USB_DEVICE_STACK is not set
# CONFIG_USB_DEVICE_STACK_NEXT is not set
# CONFIG_USB_HOST_STACK is not set
# CONFIG_USBC_STACK is not set
# CONFIG_ZBUS is not set
# CONFIG_MODULES is not set
# end of Subsystems and OS Services

CONFIG_TOOLCHAIN_ZEPHYR_0_16=y
CONFIG_TOOLCHAIN_ZEPHYR_SUPPORTS_THREAD_LOCAL_STORAGE=y

#
# Build and Link Features
#

#
# Linker Options
#
# CONFIG_LINKER_ORPHAN_SECTION_PLACE is not set
CONFIG_LINKER_ORPHAN_SECTION_WARN=y
# CONFIG_LINKER_ORPHAN_SECTION_ERROR is not set
CONFIG_ROM_END_OFFSET=0
CONFIG_LD_LINKER_SCRIPT_SUPPORTED=y
CONFIG_LD_LINKER_TEMPLATE=y
# CONFIG_CMAKE_LINKER_GENERATOR is not set
# CONFIG_HAVE_CUSTOM_LINKER_SCRIPT is not set
CONFIG_LINKER_SORT_BY_ALIGNMENT=y

#
# Linker Sections
#
# CONFIG_LINKER_USE_BOOT_SECTION is not set
# CONFIG_LINKER_USE_PINNED_SECTION is not set
CONFIG_LINKER_GENERIC_SECTIONS_PRESENT_AT_BOOT=y
CONFIG_LINKER_LAST_SECTION_ID=y
CONFIG_LINKER_LAST_SECTION_ID_PATTERN=0xE015E015
CONFIG_LINKER_USE_RELAX=y
# end of Linker Sections

CONFIG_LINKER_ITERABLE_SUBALIGN=4
CONFIG_LINKER_DEVNULL_SUPPORT=y
# CONFIG_LINKER_DEVNULL_MEMORY is not set
# end of Linker Options

#
# Compiler Options
#
# CONFIG_STD_C90 is not set
CONFIG_STD_C99=y
# CONFIG_STD_C11 is not set
# CONFIG_STD_C17 is not set
# CONFIG_STD_C23 is not set
CONFIG_TOOLCHAIN_SUPPORTS_GNU_EXTENSIONS=y
# CONFIG_GNU_C_EXTENSIONS is not set
# CONFIG_CODING_GUIDELINE_CHECK is not set
# CONFIG_COMPILER_FREESTANDING is not set
CONFIG_SIZE_OPTIMIZATIONS=y
# CONFIG_SPEED_OPTIMIZATIONS is not set
# CONFIG_DEBUG_OPTIMIZATIONS is not set
# CONFIG_NO_OPTIMIZATIONS is not set
# CONFIG_COMPILER_WARNINGS_AS_ERRORS is not set
# CONFIG_COMPILER_SAVE_TEMPS is not set
CONFIG_COMPILER_TRACK_MACRO_EXPANSION=y
CONFIG_COMPILER_COLOR_DIAGNOSTICS=y
# CONFIG_FORTIFY_SOURCE_NONE is not set
CONFIG_FORTIFY_SOURCE_COMPILE_TIME=y
# CONFIG_FORTIFY_SOURCE_RUN_TIME is not set
CONFIG_COMPILER_OPT=""
# CONFIG_MISRA_SANE is not set
# end of Compiler Options

# CONFIG_ASSERT_ON_ERRORS is not set
# CONFIG_NO_RUNTIME_CHECKS is not set
CONFIG_RUNTIME_ERROR_CHECKS=y

#
# Build Options
#
CONFIG_KERNEL_BIN_NAME="zephyr"
CONFIG_OUTPUT_STAT=y
# CONFIG_OUTPUT_SYMBOLS is not set
# CONFIG_OUTPUT_DISASSEMBLY is not set
CONFIG_OUTPUT_PRINT_MEMORY_USAGE=y
# CONFIG_CLEANUP_INTERMEDIATE_FILES is not set
# CONFIG_BUILD_NO_GAP_FILL is not set
# CONFIG_BUILD_OUTPUT_EXE is not set
# CONFIG_BUILD_OUTPUT_S19 is not set
# CONFIG_BUILD_OUTPUT_UF2 is not set
# CONFIG_BUILD_OUTPUT_STRIPPED is not set
# CONFIG_BUILD_OUTPUT_COMPRESS_DEBUG_SECTIONS is not set
# CONFIG_BUILD_ALIGN_LMA is not set
# CONFIG_APPLICATION_DEFINED_SYSCALL is not set
# CONFIG_MAKEFILE_EXPORTS is not set
# CONFIG_BUILD_OUTPUT_META is not set
CONFIG_BUILD_OUTPUT_STRIP_PATHS=y
CONFIG_CHECK_INIT_PRIORITIES=y
# CONFIG_EMIT_ALL_SYSCALLS is not set
# end of Build Options

CONFIG_WARN_DEPRECATED=y
CONFIG_ENFORCE_ZEPHYR_STDINT=y
# end of Build and Link Features

#
# Boot Options
#
# CONFIG_IS_BOOTLOADER is not set
# CONFIG_BOOTLOADER_BOSSA is not set
# end of Boot Options