Application building error

RE: Application building error

Megaghosty — Thu, 27 Mar 2025 08:09:49 GMT

Already done don't change anything

I'm trying to make a simple application that send temperature in mqtt (to a local mqtt server) with the embedded sensor on the thingy91

RE: Application building error

Hakon — Thu, 27 Mar 2025 08:04:36 GMT

You can try removing the NCS entirely from your system, then reinstall it from scratch.

RE: Application building error

Megaghosty — Wed, 26 Mar 2025 13:56:19 GMT

i was able to upgrade but i noted it change nothing to my problem

RE: Application building error

Hakon — Wed, 26 Mar 2025 12:20:20 GMT

[quote user="Megaghosty"]I tried to change the sdk to 2.9.0 for solving this problem but in downgrade to the SDK 2.8.0[/quote]

You were not able to upgrade to 2.9.0?

RE: Application building error

Megaghosty — Thu, 20 Mar 2025 09:22:41 GMT

Yes, the hello word succeed to build. I tried to change the sdk to 2.9.0 for solving this problem but in downgrade to the SDK 2.8.0

RE: Application building error

Hakon — Thu, 20 Mar 2025 09:09:18 GMT

[quote user="Megaghosty"]it work normally [/quote]

By that you mean that building the hello world application works normally? Did you do any changes to the SDK, like updating to a newer release or something?

RE: Application building error

Megaghosty — Wed, 19 Mar 2025 13:29:28 GMT

it happen with some applications with a simple hello world it work normally

RE: Application building error

Hakon — Wed, 19 Mar 2025 09:21:21 GMT

[quote user=""]Hello when I build an application on VS Code, the terminal give this error :[/quote]

Does this error happen when you build for all applications that you try to build, or is it just this one? It kinda sounds like a toolchain issue, or there is something wrong with the installation of the SDK perhaps.

RE: Application building error

Megaghosty — Tue, 18 Mar 2025 08:45:59 GMT

# Activer les logs
CONFIG_LOG=y

# Activer le support réseau
CONFIG_NETWORKING=y
CONFIG_NET_SOCKETS=y
CONFIG_NET_IPV4=y
CONFIG_NET_TCP=y
CONFIG_NET_HTTP=y

# Activer le capteur de température intégré
CONFIG_SENSOR=y
CONFIG_TEMP_NRF5=y

# Activer le gestionnaire de threads et le mode veille
CONFIG_THREAD_MONITOR=y
CONFIG_PM=y

Here's my prf.conf file

RE: Application building error

Megaghosty — Tue, 18 Mar 2025 08:34:07 GMT

#include <zephyr/kernel.h>

#include <zephyr/device.h>

#include <zephyr/devicetree.h>

#include <zephyr/drivers/sensor.h>

#include <zephyr/net/socket.h>

#include <zephyr/net/http/client.h>

#include <stdio.h>

#define SERVER_ADDR "">http://example.com/temp" // Remplace avec ton URL

#define HTTP_PORT 80

static const struct device *temp_sensor = DEVICE_DT_GET_ONE(nordic_nrf_temp);

void send_temperature(float temp) {

char request[256];

snprintf(request, sizeof(request), "POST /temp HTTP/1.1\r\n"

"Host: example.com\r\n"

"Content-Type: application/json\r\n"

"Content-Length: %d\r\n\r\n"

"{\"temperature\": %.2f}", 15, temp);

struct sockaddr_in server;

int sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);

if (sock < 0) {

printk("Erreur socket\n");

return;

}

server.sin_family = AF_INET;

server.sin_port = htons(HTTP_PORT);

inet_pton(AF_INET, SERVER_ADDR, &server.sin_addr);

if (connect(sock, (struct sockaddr *)&server, sizeof(server)) < 0) {

printk("Erreur connexion serveur\n");

close(sock);

return;

}

send(sock, request, strlen(request), 0);

close(sock);

}

void main(void) {

if (!device_is_ready(temp_sensor)) {

printk("Capteur température non disponible\n");

return;

}

struct sensor_value temp_value;

while (1) {

sensor_sample_fetch(temp_sensor);

sensor_channel_get(temp_sensor, SENSOR_CHAN_DIE_TEMP, &temp_value);

float temp = sensor_value_to_double(&temp_value);

printk("Température: %.2f\n", temp);

send_temperature(temp);

k_sleep(K_SECONDS(10));

}

RE: Application building error

Hakon — Mon, 17 Mar 2025 14:26:29 GMT

Can you share your code files here?

RE: Application building error

Megaghosty — Fri, 14 Mar 2025 20:23:28 GMT

devzone.nordicsemi.com/.../5661.log.txt

RE: Application building error

Amanda Hsieh — Fri, 14 Mar 2025 13:01:14 GMT

This doesn't provide any useful message. Please upload the log via Toolbar -> Insert ->Code or file.

RE: Application building error

Megaghosty — Fri, 14 Mar 2025 08:58:35 GMT

Hello, I changed the config in the prj.conf but i still have issue with the build for my application
Regards
Julien

-- Configuring incomplete, errors occurred!
See also "C:/Users/peyre/Desktop/ProjetNemeus/testsensor/build/CMakeFiles/CMakeOutput.log".
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\2d382dcd92\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/2d382dcd92/opt/bin/python.exe '-Bc:\Users\peyre\Desktop\ProjetNemeus\testsensor\build' -GNinja -DBOARD=thingy91/nrf9160/ns -DNCS_TOOLCHAIN_VERSION=NONE -DCONF_FILE=c:/Users/peyre/Desktop/ProjetNemeus/testsensor/prj.conf '-SC:\ncs\v2.8.0\zephyr\share\sysbuild' '-DAPP_DIR:PATH=c:\Users\peyre\Desktop\ProjetNemeus\testsensor'

RE: Application building error

Amanda Hsieh — Thu, 13 Mar 2025 13:02:54 GMT

Hi,

[quote user=""]c:/Users/peyre/Desktop/ProjetNemeus/testsensor/prj.conf:28: warning: attempt to assign the value 'y' to the undefined symbol BOARD_THINGY91_NRF9160NS[/quote]

BOARD_THINGY91_NRF9160NS is changed to BOARD_THINGY91_NRF9160_NS in NCS v.2.8.0.

Regards,
Amanda H.