Radio Test in nRF7002 for FCC test

RE: Radio Test in nRF7002 for FCC test

Amanda Hsieh — Fri, 09 May 2025 13:27:25 GMT

Hi,

Jonathan is out of the office, so I take this case.

nRF7002 only supports the 20 MHz channel bandwidth. See https://www.nordicsemi.com/Products/nRF7002.

Regards,
Amanda H.

RE: Radio Test in nRF7002 for FCC test

Jagan K — Tue, 06 May 2025 13:07:03 GMT

Hi ,

Thanks for sharing the above links, it was useful.

I can see that the Bandwidth set to max is 20MHZ, is it correct. For the WiFi 6, the max bandwidth supported is 40MHz & 80 MHz. Please share the specific commands for setting that bandwidth.

Regards,

Jagan K

RE: Radio Test in nRF7002 for FCC test

JONATHAN LL — Wed, 23 Apr 2025 09:14:47 GMT

This is what we have on it:

https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/wifi/regulatory_certification/index.html
https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/wifi/wifi_certification.html

For the BLE testing you will need DTM sample, but for testing of the radio you can use the radio test.

For the sub commands you can find them here: https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/wifi/radio_test/multi_domain/radio_test_subcommands.html#wi-fi_radio_test_subcommands

Regards,
Jonathan