ppp to the internet trough the nrf9151-dk

RE: ppp to the internet trough the nrf9151-dk

Hakon — Tue, 06 May 2025 07:40:52 GMT

Please write in detail what you would like to do. I built the modem shell sample unmodified using the PPP overlay files, and connected with picocom on linux. This works for me. Are you also able to do this? If there is something else you want to accomplish, I can try to help you with that.

RE: ppp to the internet trough the nrf9151-dk

eazuag — Tue, 29 Apr 2025 13:51:44 GMT

and this is my prj.conf:

# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause

# General config

CONFIG_LOG=y

CONFIG_LOG_DEFAULT_LEVEL=3

CONFIG_STACK_SENTINEL=y

CONFIG_PICOLIBC_IO_FLOAT=y

CONFIG_RING_BUFFER=y

CONFIG_REBOOT=y

CONFIG_EVENTFD=y

# Segger RTT

CONFIG_USE_SEGGER_RTT=y

# Where console messages (printk) are output.

# By itself, SLM does not output any.

CONFIG_RTT_CONSOLE=y

CONFIG_UART_CONSOLE=n

# Where SLM logs are output.

CONFIG_LOG_BACKEND_RTT=y

CONFIG_LOG_BACKEND_UART=n

# Network

CONFIG_NETWORKING=y

CONFIG_NET_SOCKETS=y

CONFIG_NET_NATIVE=n

CONFIG_NET_IPV4=y

CONFIG_NET_IPV6=y

# Modem library

CONFIG_NRF_MODEM_LIB=y

CONFIG_AT_CMD_CUSTOM=y

# Align the max FD entry to NRF_MODEM_MAX_SOCKET_COUNT(8)

CONFIG_ZVFS_OPEN_MAX=8

# Handle modem fault

CONFIG_NRF_MODEM_LIB_ON_FAULT_APPLICATION_SPECIFIC=y

# Use GPIO

CONFIG_GPIO=y

CONFIG_GPIO_NRFX=y

# UART interface

CONFIG_SERIAL=y

CONFIG_UART_USE_RUNTIME_CONFIGURE=y

CONFIG_UART_ASYNC_API=y

CONFIG_NRFX_TIMER2=y

# Stacks and heaps

CONFIG_MAIN_STACK_SIZE=4096

CONFIG_HEAP_MEM_POOL_SIZE=16384

CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096

CONFIG_AT_MONITOR_HEAP_SIZE=4096

# Device power management

CONFIG_PM_DEVICE=y

# FOTA

CONFIG_HTTP_PARSER_URL=y

CONFIG_FOTA_DOWNLOAD=y

CONFIG_FOTA_DOWNLOAD_PROGRESS_EVT=y

CONFIG_DFU_TARGET=y

CONFIG_DOWNLOAD_CLIENT=y

CONFIG_DOWNLOAD_CLIENT_STACK_SIZE=4096

CONFIG_DOWNLOAD_CLIENT_MAX_FILENAME_SIZE=2048

CONFIG_BOOTLOADER_MCUBOOT=y

CONFIG_IMG_MANAGER=y

# FLASH

CONFIG_FLASH=y

CONFIG_FLASH_PAGE_LAYOUT=y

CONFIG_FLASH_MAP=y

CONFIG_STREAM_FLASH=y

CONFIG_MPU_ALLOW_FLASH_WRITE=y

CONFIG_IMG_ERASE_PROGRESSIVELY=y

# Settings

CONFIG_SETTINGS=y

CONFIG_SETTINGS_NVS=y

CONFIG_NVS=y

# nRF Cloud

CONFIG_NRF_CLOUD_MQTT=y

CONFIG_NRF_CLOUD_FOTA=n

CONFIG_NRF_CLOUD_AGNSS=y

CONFIG_NRF_CLOUD_AGNSS_FILTERED=n

CONFIG_NRF_CLOUD_PGPS=n

CONFIG_NRF_CLOUD_LOCATION=y

CONFIG_NRF_CLOUD_LOG_LEVEL_INF=y

CONFIG_NRF_CLOUD_GPS_LOG_LEVEL_INF=y

CONFIG_NRF_CLOUD_CLIENT_ID_SRC_INTERNAL_UUID=y

CONFIG_NRF_CLOUD_WIFI_LOCATION_ENCODE_OPT_MAC_RSSI=y

CONFIG_DATE_TIME=y

CONFIG_MODEM_INFO=y

CONFIG_MODEM_INFO_ADD_DATE_TIME=n

# UUID and JWT

CONFIG_MODEM_JWT=y

# MQTT client

#CONFIG_MQTT_KEEPALIVE=60

CONFIG_MQTT_CLEAN_SESSION=y

# AT command helper libraries

CONFIG_AT_PARSER=y

CONFIG_AT_MONITOR=y

# Disable TF-M logging.

# TF-M log sending will block until remote end is ready, when HWFC is used on UART1.

CONFIG_TFM_LOG_LEVEL_SILENCE=y

# SLM-specific configurations

CONFIG_SLM_CUSTOMER_VERSION=""

CONFIG_SLM_EXTERNAL_XTAL=n

# debug options

#CONFIG_ASSERT=y

#CONFIG_LOG_BUFFER_SIZE=16384

#CONFIG_SLM_LOG_LEVEL_DBG=y

#CONFIG_LOG_PRINTK=n

#CONFIG_LOG_MODE_IMMEDIATE=y

# For using external GNSS antenna

#CONFIG_MODEM_ANTENNA=y

#CONFIG_MODEM_ANTENNA_GNSS_EXTERNAL=y

# Habilitar soporte para PPP

CONFIG_SLM_PPP=y

RE: ppp to the internet trough the nrf9151-dk

eazuag — Tue, 29 Apr 2025 13:48:30 GMT

Hi Hakon. I assume you are talking about SML. Here's my building config:

overlay-ppp.conf :

# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause

CONFIG_SLM_PPP=y

# When using PPP, disable commands of IP-based protocols to save flash space.

CONFIG_SLM_FTPC=n

CONFIG_SLM_TFTPC=n

CONFIG_SLM_HTTPC=n

CONFIG_SLM_MQTTC=n

# NCS modem libraries

CONFIG_PDN=y

CONFIG_AT_CMD_CUSTOM=y

CONFIG_NRF_MODEM_LIB_SHMEM_TX_SIZE=22528

# Zephyr PPP support

CONFIG_NET_NATIVE=y

CONFIG_NET_L2_PPP=y

CONFIG_MODEM_MODULES=y

CONFIG_MODEM_PPP=y

CONFIG_MODEM_BACKEND_UART=y

CONFIG_MODEM_BACKEND_UART_ASYNC_TRANSMIT_TIMEOUT_MS=1000

# L2 protocol

CONFIG_NET_L2_PPP_MGMT=y

CONFIG_NET_L2_PPP_OPTION_MRU=y

CONFIG_NET_L2_PPP_OPTION_SERVE_IP=y

CONFIG_NET_L2_PPP_OPTION_SERVE_DNS=y

CONFIG_NET_L2_PPP_TIMEOUT=5000

CONFIG_NET_L2_PPP_MAX_CONFIGURE_REQ_RETRANSMITS=20

# IP stack

CONFIG_NET_IP_ADDR_CHECK=n

CONFIG_NET_SOCKETS_PACKET=y

# network buffering

CONFIG_NET_BUF=y

CONFIG_NET_BUF_POOL_USAGE=y

CONFIG_NET_PKT_RX_COUNT=44

CONFIG_NET_BUF_RX_COUNT=88

CONFIG_NET_PKT_TX_COUNT=44

CONFIG_NET_BUF_TX_COUNT=88

CONFIG_NET_TC_RX_COUNT=0

# debug options

#CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=4096

#CONFIG_NET_LOG=y

#CONFIG_NET_IF_LOG_LEVEL_DBG=y

#CONFIG_NET_PKT_LOG_LEVEL_DBG=y

#CONFIG_NET_L2_PPP_LOG_LEVEL_DBG=y

#CONFIG_NET_MGMT_EVENT_LOG_LEVEL_DBG=y

#CONFIG_MODEM_MODULES_LOG_LEVEL_DBG=y

#CONFIG_UART_LOG_LEVEL_DBG=y

overlay-ppp-without-cmux.conf :

# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause

# Include this Kconfig fragment only if using PPP without CMUX.

# Ensure that HW RX byte counting is enabled for the PPP UART. This especially matters at higher baud rates.

CONFIG_UART_1_NRF_HW_ASYNC=y

CONFIG_UART_1_NRF_HW_ASYNC_TIMER=1

overlay-ppp-without-cmux.overlay :

* SPDX-License-Identifier: LicenseRef-Nordic-5-Clause

/* Include this devicetree overlay only if using PPP without CMUX. */

/ {

chosen {

ncs,slm-ppp-uart = &uart1;

};

/* PPP UART. Baud rates other than 115200/230400/1000000 didn't work on uart1. */

&uart1 {

status = "okay";

hw-flow-control;

current-speed = <1000000>;

};

RE: ppp to the internet trough the nrf9151-dk

Hakon — Tue, 29 Apr 2025 09:27:51 GMT

Hello,

[quote user=""]i been strugling the last couple of days to make a simple PPP connection from a debian12 laptop to the internet passing trough the nrf9151.[/quote]

can you describe in detail what you do when building this? I got this to run on a run using a Linux computer and nrf9151 dk. I built with the ppp.overlay and ppp-overlay.conf.

RE: ppp to the internet trough the nrf9151-dk

eazuag — Fri, 25 Apr 2025 22:14:17 GMT

By the way, im know for sure that the modem registres at the isp. Both modem Shell and slm