Thingy:91 X (nrf9051) and BMI270

RE: Thingy:91 X (nrf9051) and BMI270

finch — Wed, 14 May 2025 09:18:48 GMT

I follow Your reccomendation and start to work with sample. See prj.conf ( GPIO,SPI and sensors enabled ) and app.overlay (sensor enabled) for changes

github.com/.../bmi270

accel and gyro is working now

RE: Thingy:91 X (nrf9051) and BMI270

dejans — Tue, 13 May 2025 11:41:42 GMT

Hi,

You could start by enabling the sensor support in prj.conf and adding appropriate entries to devicetree. You can refer to these discussions - how to enable BMI270 and how to enable BMI270 correctly. There is also BMI270 sensor sample that you could look at.

Best regards,
Dejan

RE: Thingy:91 X (nrf9051) and BMI270

finch — Tue, 13 May 2025 09:04:11 GMT

Thanks for a prompt response . I was not able to get data in pooling mode .

RE: Thingy:91 X (nrf9051) and BMI270

ciri6254 — Mon, 12 May 2025 19:19:51 GMT

Hey. Maybe it is similar to the Thingy:53. I just posted a different question: BMI270 TRIGG_DATA_READY on the Thingy:53 - Nordic Q&A - Nordic DevZone - Nordic DevZone

But i added my .conf and my .overlay and my main. Maybe it helps if you are working with the Sensor API from Zephyr and VS Studio Code Extension.

Because enabling works, I just can not get the Trigger to work.