Current measurement in the 52840dk with Power profile kit 2

RE: Current measurement in the 52840dk with Power profile kit 2

SwRa — Thu, 17 Jul 2025 11:16:57 GMT

Hi Faith,

Do make sure that you're doing measurements in the ampere meter mode. The connections look okay and follows what is described in the documentation.. Could you connect a jumper across P22 and see if you are able to detect the DK.? Perhaps re-flash the firmware onto the DK and see if it is working normally. (You need to flash a code onto the DK before cutting SB40 and make the connections as shown in the ppk2 documentation to take the current measurements.)

Regards,

Swathy

RE: Current measurement in the 52840dk with Power profile kit 2

fatih basaris — Wed, 16 Jul 2025 21:11:45 GMT

I checked with my mulimeter. I am sure that it is not shorted..

RE: Current measurement in the 52840dk with Power profile kit 2

PaKa — Mon, 14 Jul 2025 07:36:48 GMT

Looks like the cut didn'¨t go all the way through so it is probably still shorted.