The Bluetooth packet transmission speed cannot be increased

RE: The Bluetooth packet transmission speed cannot be increased

Simonr — Thu, 18 Sep 2025 11:03:54 GMT

Please be specific. What Bluetooth receiver is that and how is it using the nRF Connect for Desktop application? Also, please provide some logs of how you calculate/find the throughput in your use case. What throughput rates does this Bluetooth LE receiver support for example?

Best regards,

Simon

RE: The Bluetooth packet transmission speed cannot be increased

HHJ — Thu, 18 Sep 2025 08:05:27 GMT

A Bluetooth receiver is plugged into my computer.

Best regards,

HHJ

RE: The Bluetooth packet transmission speed cannot be increased

Simonr — Thu, 18 Sep 2025 06:49:53 GMT

What device have you connected to your desktop that the nRF5340 communicates with? The nRF Connect for Desktop BLE app does require that you have an nRF5x DK of some kind that communicates with the computer. If not, how are you communicating to the nRF Connect for Desktop application exactly?

Best regards,

Simon

RE: The Bluetooth packet transmission speed cannot be increased

HHJ — Wed, 17 Sep 2025 05:14:25 GMT

thanks bro

I only have a self-developed board with NRF5340, which is being debugged with the computer software nrf connect for desktop Bluetooth Low Energy. There are no other peripherals set up on the board yet. I connected an LED light after the data transmission to observe the time required for data transmission. When K_MSEC() is set to 50, the LED blinks approximately every 47ms; when K_MSEC() is set to 3, the LED blinks approximately every 2.7ms.

We want it to send a data packet every 3ms. It seems that setting K_MSEC() to 3 is appropriate. However, in actual situations, it feels like the transmission is blocked, or the Bluetooth module wants to send data at such a fast speed but is restricted by some kind of limitation that prevents it from doing so. So far, our team has not found the cause of this issue. The pictures include my current configuration, relevant code, and the phenomenon when K_MSEC() is set to 3. We hope the Nordic team can analyze this situation and help us get out of the predicament.

Best regards

HHJ

RE: The Bluetooth packet transmission speed cannot be increased

Simonr — Tue, 16 Sep 2025 07:32:35 GMT

In order to achieve maximum throughput, I'd recommend you check out the Bluetooth: Throughput sample for reference that gives some pointers to increase data throughput over BLE: https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/bluetooth/throughput/README.html

Some things to be aware of is making sure you are using the 2Mbps PHY layer, that you have maximized the MTU and data packet size, etc. It's also very well covered how to achieve maxmum Bluetooth LE throughput in this blog post by Novelbits: https://novelbits.io/bluetooth-5-speed-maximum-throughput/

If you're still struggling, can you explain what the two devices connecting here are? Do you have one nRF5340 DK and one custom board with an nRF5340, or is the setup something different?

Best regards,

Simon